Importing/exporting movie scene into a website
Hello,
I am extremely new to Flash. I followed a tutorial on You Tube to create images that would fade in and out. I am using a set of 4 images. It works fine but now I need to put it in a website that is being created from a template. I know it may not work with the template but I don't even know how to begin to get it from Flash. I hope I explained this good enough, if not I will try to answer any questions to explain it more.
Thank you,
Idahoperson
click file/save as and save your fla to a directory that you can find. then click file/publish. open the directory where you saved your fla. you should see, at least, two other files there; an html and a swf file. if you're loading assets (like image files), they should be in that same directory or subdirectory.
upload the html and swf (and needed assets) to a directory on your server and navigate to the html you uploaded.
Similar Messages
-
Importing a 3D scene into Director
Hi,
I am using Director 11.5 for my final year project which I am new to.
I am not starting in Director for a couple of weeks as I am still modelling in texturing at the moment.
However, I would like to occasionally export my scene into w3d file and see how it looks in Director. I am having problems with this.
Can anyone help with some basic steps starting from after importing the w3d file to be able to explore the scene (basic camera control) The scene is outside and has ground, a vertical perimeter wall (textured as trees) and a separate building.
Any help is much appreciated. ThanksThanks, I now have 3DPI and am just trawling through the docs to get to grip how it works. I am a completely new to this and am still working out how to run the movie so you can view the scene and switch between cameras. Do you have any advice that may help me?
-
Cannot import a .mov file into the library
I am trying to import a .mov file into my library so I can
create a .fla file. Every time I try to import it into the library
using the import wizard, it starts the importing process and always
quits not quite two minutes into the process. It then returns me to
the front page of the import wizard. I have done this before with
absolutely no problems.
The one thing that I am wondering about is the size of this
particular .mov file. It is 377MB. Do you think this may be part of
my problem? Thank you in advance for anyone's input or
suggestions!Jeremy Williams wrote:
> I am trying to import a .mov file into my library so I
can create a .fla file.
> Every time I try to import it into the library using the
import wizard, it
> starts the importing process and always quits not quite
two minutes into the
> process. It then returns me to the front page of the
import wizard. I have
> done this before with absolutely no problems.
>
> The one thing that I am wondering about is the size of
this particular .mov
> file. It is 377MB. Do you think this may be part of my
problem? Thank you in
> advance for anyone's input or suggestions!
I would consider 10mb to be too big for a flash file. Even if
it was CD
I would load it dynamically to avoid performance problem.
377mb is out of the question way beyond flash ability to
maintain stable
performance, not just the final output but the IDE itself.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
Error -2002 when importing quicktime movie clips into iMovie Project
When I import QuickTime movie clips into my project, the scroll bar fills about 1/3 of the way, and then I get this message:
Can't open file "DSCN0812.MOV"; skipping it and continuing. I CLICK "OK," and then this message appears:
Error during import
The file could not be imported: (-2002)
This happens to every movie clip. Anyone have any idea what's happening here?
Thanks!Paul Kirtley wrote:
.. file "DSCN0812.MOV"..
The file could not be imported: (-2002)
I guess, you try to import 'moving images' from a still cam, right? these are in a codec (=mov is no format, just a container) , iM doesn't support. Use the free tool *Mpeg Streamclip* www.squared5.com to convert these files to 'dv stream' BEFORE importing to iMovie. -
I'm trying to import a movie file into imovie that I know is 3hr16mins long but when it's finished importing,all I have in the programme is the heavily edited 51mins that i used in a previous project (using the same file),5 years ago. How can I stop iMovie from reverting back or could the much longer file be there and I have incorrect settings so I can't see it all?
Are these files MPEG compressed files? iMovie can not deal with the multiplexed audio of those files. For suggestions on how to get them right start here...
http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
And if your files are not MPEGs, some of the suggestions on that page may still do what you need done.
Patrick -
Dynamically importing a .mov file into flash
Hi,
I need to import a .mov file into a flash file and create a
.swf movie. I can do it through File > Import Movies option. But
I want to make it dynamic and import the movie. I would like to use
ActionScripts rather than the File> Import options. Pls let me
know if this is possible. Let me know if you have any questions.
Appreciate any help.
Thanks & Regards,
MageshYou can only dynamically load at runtime FLV movies.
You can automate the authoring time environment but this is
only with the Authoring tool. See
Extending
Flash -
Can I import a *.mov file into iPhoto?
Can I import a *.mov file into iPhoto? If so, how?
Yes. Open iPhoto:
File > Import to Library... > select the .move file > Import -
Can't import mp4/mov files into iMovie
I tried to create a new project by importing a .mp4 file from my account on Youtube. It copied the file to the event but didn't create a thumbnail. I did some research and I tried:
-Quitting imovie, changing the name of the event folder, then restarting imovie.
-Importing the .mp4 to a different event folder. Quitting/restarting.
At this point, the thumbnail for the newly imported movie appeared but the other videos that were previously (and successfully) thumbnailed in that event disappeared. I quit/restarted iMovie and all the thumbnails in that event were missing.
Here's what I've tried since then:
-Converting the .mp4 in Handbrake to .mp4 and then importing again. No luck.
-TRYING to convert the .mp4 to .mov in mpeg streamclip. I get an "Audio Decoding Error" when I attempt.
-Converting the .mp4 to .mov while disabling the sound in mpeg streamclip. IT WORKS and iMovie is able to import AND thumbnail.
So it'd appear that there's something wrong with the audio in the .mp4 file. Tried other .mp4 files and none of them were able to be converted or imported. Tried extracting the audio from the .mp4 file via MPEG streamclip and there's the same "Audio Decoding Error." The audio on the .mp4 file is AAC.
OK... It'd appear that I'd need to just import the .mov (no sound) along with the audio from the clip (I've used AudioHijack for that) to edit both in iMovie. The problem is that when I try to export it in iMovie I receive error codes.
This just all seems way, way more complicated that it needs to be. Does anyone have any suggestions on something I haven't tried yet or perhaps some video editing software (non FCE) worth looking into?
ThanksI was currently having the same issue trying to import into imovie. I have EyeTV Hybrid and when exporting a movie it asks you to select format in which to export it in. I selected m-peg4 and when I tried to import into imovie it was grayed in the finder, so what I did was return to the export feature in EyeTV and exported again under a different format - for imovie. It's exporting as we speak and I feel this will allow me to import properly now. Hope this helps.
-
Problem Importing Importing Avid Mov File Into FCP
Hello all,
I had transitioned into this issue off an older thread I had, with a different topic. So I figured it was smarter to just make it it's own thread, since it's become it's own issue.
I am editing the core of a project on Final Cut Pro 6. A portion of the footage that was shot for this project though, was captured on a PC into Avid Media Composer 3.0, and therefore, converted to MXF format.
I am running both Final Cut Pro 6 (FCP 6) and Avid Media Composer 3.0 (AMC3) on my Macbook Pro, so I was able to import this MXF footage into AMC3. That was the easy part. The hard part, has been knowing how to properly export it, so I can then, properly import it into FCP6.
Important detail about the FCP6 System Settings:
- *The sequence preset is DVCPRO HD - 1080p24*
In the Avid, when I go to export a small 1 min clip (as a test), these are the Quicktime options I am given:
Fast-Export Quicktime NTSC
Fast-Export Quicktime PAL
Make New - QuickTime Reference
Pro Tools QuickTime (ref)
QuickTime Reference
Quicktime Reference DV Codec
Send To QT Movie
None of them were seeming to work. I was getting this message:
"Long GOP media can not be exported using same as source. Please select a custom resolution or transcode to an I-frame only resolution."
*Send To QT Movie* seems to be the only one that works. But I then had to go in and customize it, making my own Saved preset for this.
I've now so far tried this with 4 custom presets, and while all of them are able to export and play / look fine on my desktop..... none of them import correctly into FCP6. They'll play as clips... but completely stuttery and unusable. I'll then drop them into a sequence, and they'll play for about 3 seconds and then I'll get this message:
"Warning - Dropped Frames
One or more frames were dropped during playback.
If this occurs frequently, try:
- Turning off 'Unlimited RT'
- Lowering your compression data rate.
- Closing open sequences.
- Lowering the preference for real-time audio tracks.
- Increasing the speed of your system and/or disk drives and/or network connection."
Now, I've also gotten a message about the projects needing to have the same capture preset, but I can't replicate it at the time of this post. Though, I'm sure this is probably the root of the problem.
Here's why: In AMC3, with my custom export preset, I notice that Avid supports the DVCPRO codecs, but doesn't have the exact one I'm using in FCP6.
Here's what I have in my AMC3:
DV/DVCPRO - NTSC (this is the one I'm using, and have tweaked the frame rate to 23.98)
DVCPRO - PAL
DVCPRO HD 1080i50
DVCPRO HD 1080i60
DVCPRO HD 1080p25 (this one is close...)
DVCPRO HD 1080p30
DVCPRO HD 720i50
DVCPRO HD 720i60
DVCPRO50 - NTSC
DVCPRO50 - PAL
Now, you'll remember that my sequence preset in FCP6 is DVCPRO HD - 1080p24.
Because this doesn't exist in Avid, I went with DVCPRO HD 1080p25 and just customized the frame rate to 23.98.
Still no cigar though.
Does anyone have any suggestions on how I should further customize the Avid codecs? Or is there even a way to just download more Avid DVCPRO codecs so I can find one with 1080p24?
Sorry for such a long post. I like to be thorough.Hi Kyle,
Just some more backstory:
This was a two day shoot.
- One Day 1 of the shoot (Saturday), we shot with the Sony camera, on Sony DVC tapes (MiniDV). This was about 20 gigs worth of media shot that day. That footage was later captured onto an Avid MC 3.0 in MXF format. (I still have it all raw on my passport drive if you need further info about those files)
- On Day 2 of the shoot (Sunday), we got the camera we wanted all along for the shoot -- the Panasonic HVX200. Therefore, all of Day 2 was shot on P2 cards, converted on a Macbook Pro, and then put onto an external harddrive. This was about 80 gigs of media.
Right now, when I watch the Sunday footage (Sony) on FCP6, I do indeed see faint horizontal lines on the canvas, when free-framed and at 100%. They're not terrible... but they're there. (I'm not great at this, so if you need total confirmation, I can upload you a large rez screenshot so you can decipher if the interlaced lines are there)
Now, I just checked this out on the Sunday footage as well (the Panasonic P2 card footage which wasn't converted, but imported directly into FCP6, without need for the Avid as the middle-man), and I see the same faint lines on this as well.
Both pieces of media (the original Panasonic footage and the converted Sony footage) are at 29.97FPS. Both are at the same Compressor now (DVCPRO HD 1080p30) per your instructions . Meaning, the Pansonic footage brought into FCP6 had that as a preset from the moment I installed the program and was asked to choose my project settings..... and once you explained to me how to look for this, I then sought to match it on the Avid end, and changed the EXPORT settings on the Avid files to that codec.
So both sources medias match now in FCP6. They also play now without stutter.
But they both do have those lines. Albeit, faint, but I'm concerned about them now.
So I think this definitely has to do with my Final Cut Audio/Video settings:
My Sequence Preset is: DVCPRO HD - 1080p24
My Capture Preset is: 1080p24 48KHz
Should the Sequence Preset be changed to p30?
And if so... will I then have to recapture all the Panasonic footage back in? (I'd lose all my log notes and shot names).
Or, can I just delete the two timelines, change the sequence setting, and then redrag them back in?
Thanks for all your help, Kyle. -
Hi all:
I have an AVI clip off a Canon G7 Digital Camera.
When I import into Premiere CS4, the info. says 640x480(1.0), 26+12, 30 fps. I matched the setting on the Sequence. However, when I export to Windows Media, Quick Time, etc., the speed of playback is very slow, and I don't hear sound.
I suspect I have problem with my import / export setting.
What setting should I use for New Project, New Sequence, & Export movie?
Thanks,
FrancoYou may need to convert the file before importing it into PPro successfully.
Cheers
Eddie -
Export movie clip into a series of png(images)
Hi Im using flash CS6 and I was wondering if it is possible to export a movie clip into a series of images, ie if there are 200 frames, convert the movie clip to 200 images...preferably png.
Thanks all!We write blitting scripts(AIR) that essentially frame capture to create sequences or sprite sheets (RGBA32 png no problem)
the only downside is you need to author a definitive start -> end to define the number of frames you want.
if you nest a Bird flap with 5 frames clips inside a 6 frame hop then the clip will only loop perffectly if you author 30 frames...
if you want to make it exactly 6 frames without skipping you need to manually unify these motions
There is sprite packing software (such as texture packer) which will blit a swf [movieClip]; I author traditional 2D vFX in flash, add some blur/glow and other tween FX such as advanced color/alpha changes. (make sure the timelines are unified) Bring the swf to Texturepacker and the thing blits out the sprite sheet wonderfully with all the movieClip filter FX.
works great,
too bad the native flash software can't do this. in order to do it in flash you have to use graphic symbols. therefore the timelines must show you the animation and what you see is what you get. And since they have to be graphics you don't get any movieclip filters blur/glow . dissapointing -
Import 8mm movies directly into Elements 12
Curious to know if it is possible to directly import 8mm movies via a camcorder, through a Canopus ADVC110 analog to digital converter device, directly into Premiere Elements 12? If so, how would that be accomplished, and what are the settings necessary for optimal quality?
Yes you can but I recommend (and always use myself) WinDV or Exsate DV Capture Live. There are no settings in PRE that affect the quality of DV import as it (and the other two tools I've mentioned) capture the complete raw video stream from the digitizer. It is the settings on the digitizer that can affect the quality of that stream and, frankly, I find the Canopus manuals so unhelpful and poorly written that I've always just gone with the defaults.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
Cannot import specific MOV file into iMovie. HELP please!
I have been using iMovie for many years and am not a novice.
For some reason, I have a specific MOV file that I cannot import into iMovie 10.0.5. When I try to import the file, I get an error message:
"No Importable Files: None of the selected files or folders can be imported"
The file is NOT corrupt and plays perfectly in QuickTime. Interestingly, when I try to import the movie in iMovie, it shows 0.0 sec duration, even though it load/plays perfectly in iMovie with a duration of 54:45. See file A1 below:
I even tried converting the file to M4V in Quicktime, but iMovie would still not import the new M4V file.
Any suggestions? This is an important Movie, I cannot re-record it, and I need to edit it in iMovie.
Thanks in advance!I copied it below. I would appreciate any suggestions!
Basic information:
General
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 78.9 MiB
Duration : 54mn 44s
Overall bit rate mode : Variable
Overall bit rate : 201 Kbps
Encoded date : UTC 2014-12-10 21:01:49
Tagged date : UTC 2014-12-10 21:01:58
Writing library : Apple QuickTime
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Format settings, GOP : M=2, N=30
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 54mn 44s
Bit rate mode : Variable
Bit rate : 63.4 Kbps
Maximum bit rate : 768 Kbps
Width : 1 728 pixels
Height : 1 080 pixels
Display aspect ratio : 16:10
Frame rate mode : Variable
Frame rate : 0.294 fps
Original frame rate : 25.000 fps
Minimum frame rate : 0.062 fps
Maximum frame rate : 50.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.116
Stream size : 24.9 MiB (32%)
Encoded date : UTC 2014-12-10 21:01:38
Tagged date : UTC 2014-12-10 21:01:58
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 54mn 38s
Source duration : 54mn 38s
Bit rate mode : Constant
Bit rate : 128 Kbps
Channel(s) : 1 channel
Channel positions : Front: C
Sampling rate : 44.1 KHz
Compression mode : Lossy
Stream size : 48.3 MiB (61%)
Source stream size : 48.3 MiB (61%)
Expanded information:
General
Count : 284
Count of stream of this kind : 1
Kind of stream : General
Stream identifier : 0
Count of video streams : 1
Count of audio streams : 1
Video_Format_List : AVC
Video_Format_WithHint_List : AVC
Codecs Video : AVC
Audio_Format_List : AAC
Audio_Format_WithHint_List : AAC
Audio codecs : AAC LC
File name : OB
File extension : mov
Format : MPEG-4
Format/Extensions usually used : mp4 m4v m4a m4b m4p 3gpp 3gp 3gpp2 3g2 k3g jpm jpx mqv ismv isma f4v
Commercial name : MPEG-4
Format profile : QuickTime
Internet media type : video/mp4
Codec ID : qt
Codec ID/Url : http://www.apple.com/quicktime/download/standalone.html
Codec : MPEG-4
Codec/Extensions usually used : mp4 m4v m4a m4b m4p 3gpp 3gp 3gpp2 3g2 k3g jpm jpx mqv ismv isma f4v
File size : 78.88 MiB
Duration : 00:54:44.630
Overall bit rate mode : Variable
Overall bit rate : 201 Kbps
Stream size : 5.71 MiB (7%)
Proportion of this stream : 0.07233
HeaderSize : 1305394
DataSize : 81406130
FooterSize : 0
IsStreamable : Yes
Encoded date : UTC 2014-12-10 21:01:49
Tagged date : UTC 2014-12-10 21:01:58
File last modification date : UTC 2014-12-10 21:47:04
File last modification date (local) : 2014-12-10 16:47:04
Writing library : Apple QuickTime
Writing library/Name : Apple QuickTime
Video
Count : 274
Count of stream of this kind : 1
Kind of stream : Video
Stream identifier : 0
StreamOrder : 0
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format/Url : http://developers.videolan.org/x264.html
Commercial name : AVC
Format profile : [email protected]
Format settings : CABAC / 2 Ref Frames
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Format settings, GOP : M=2, N=30
Internet media type : video/H264
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Codec ID/Url : http://www.apple.com/quicktime/download/standalone.html
Codec : AVC
Codec/Family : AVC
Codec/Info : Advanced Video Codec
Codec/Url : http://developers.videolan.org/x264.html
Codec/CC : avc1
Codec profile : [email protected]
Codec settings : CABAC / 2 Ref Frames
Codec settings, CABAC : Yes
Codec_Settings_RefFrames : 2
Duration : 00:54:44.630
Bit rate mode : Variable
Bit rate : 63.4 Kbps
Maximum bit rate : 768 Kbps
Width : 1 728 pixels
Height : 1 080 pixels
Pixel aspect ratio : 1.000
Display aspect ratio : 16:10
Rotation : 0.000
Frame rate mode : Variable
Frame rate : 0.294 fps
Original frame rate : 25.000 fps
Minimum frame rate : 0.062 fps
Maximum frame rate : 50.000 fps
Frame count : 967
Resolution : 8 bits
Colorimetry : 4:2:0
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Interlacement : Progressive
Bits/(Pixel*Frame) : 0.116
Stream size : 24.9 MiB (32%)
Proportion of this stream : 0.31508
Encoded date : UTC 2014-12-10 21:01:38
Tagged date : UTC 2014-12-10 21:01:58
Buffer size : 768000
Audio
Count : 222
Count of stream of this kind : 1
Kind of stream : Audio
Stream identifier : 0
StreamOrder : 1
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Commercial name : AAC
Format profile : LC
Codec ID : 40
Codec : AAC LC
Codec/Family : AAC
Codec/CC : 40
Duration : 00:54:38.179
Source duration : 00:54:38.193
Bit rate mode : Constant
Bit rate : 128 Kbps
Channel(s) : 1 channel
Channel positions : 1/0/0
ChannelLayout : C
Sampling rate : 44.1 KHz
Samples count : 144567694
Frame count : 141179
Source frame count : 141180
Compression mode : Lossy
Stream size : 48.3 MiB (61%)
Proportion of this stream : 0.61259
Source stream size : 48.3 MiB (61%)
Source_StreamSize_Proportion : 0.61259 -
Importing Quicktime .move file into iMovieHD
I have been successfully pulling the files off a DVD using DVDxDV, and using that to export to Quicktime in .mov NTSC format. Then I can import into iMovie HD. It's been fine, but I have one file now that will not import. When i try to import it, it gives me an error message and says there isn't enough disk space to import it. But I was able to import other files, same size, and the window at the bottom of iMovie says there is more than 20 GB available. I thought maybe there was something wrong with that one file, so I went through the extraction process again, but that one file will still not import, even if I start a new empty project. The file is 1.4 GB, but the project has only about 25 minutes of video and this new file is about another 8 minutes.
Does anyone have any ideas? I have a 1GHZ Power PC G4, with 768 meg ram.
Thanks in advance for any help.
Patif it is already in DV format you really do not have to import it
There is a difference in .dv stream and a DV-encoded .mov:
You can just put a plain .dv stream in the Media folder and iMovie will digest it OK (if it is the same PAL/NTSC and 4:3/16:9 spec as the receiving project).
But this doesn't work with DV-encoded .mov files which the OP may have. iMovie HD will sort of imports it, but if you add a title, it will have bad artifacts.
I prefer to use MPEG Streamclip which, unlike some of its rivals, allows to convert DVD/VOB/MPEG to .dv stream which is iMovie's native format. For some strange reason other apps can convert to only .mov.
My only gripes with MPEG Streamclip are that the current version can't set the 4:3 or 16:9 flag to the exported .dv file (BTW, iMovie HD can't either!) and that it doesn't recognize QuickTime 7-style AIF format. The next version might fix these. -
Basic question about importing/exporting movies
Hi all! I'm a complete novice with Flash (and moviemaking). I used it many years ago, but haven't used it in a long, long time. Flash may not even be the program I need... so let me know if that's the case.
Basically, I shot a video with my camera. It is a .mov file. I imported it into iMovie and edited it. Then I exported it as a .mov file. I want to embed the video into a web page. As far as I can tell, in Dreamweaver it needs to be a .swf file. But I don't think I can export an swf file from iMovie. So I read online I could convert my file using Flash.
I followed directions I found online, but though it seems to be working... it's not. Here's what I did:
I opened a new file in Flash. I used the default type. I clicked on the timeline and went to File > Import > Import movie (using all the default choices).
I broused to find the .mov file. I clicked Next.
I chose a skin that was the default (Minimal Flat Custom Color Play Back See CounterV...). Clicked Next. Clicked Finish.
A little movie player is now on my Flash screen.
I started adding frames (F5). I see frames are added in the timeline.
But... when I go to play the movie... it DOES play... but the screen is black.
I see I CAN export it as a swf file... but since I can't see the movie when I play it, I'm guessing it's not working (the tutorial I was using said I should be able to see it at this point).
So... am I going about this the completely wrong way? Why is it not working? Thanks for helping me out.
julie
PS I'm using Flash Professional CC v. 13.0.0.759 on an iMacopen your mov file in adobe media encoder. save to flv or f4v.
open flash pro, add an flvplayback component to the stage and assign its source (using a relative, not absolute path) to be your flv or f4v. test.
when you have that working you can publish a swf and html. use the html code to embed the swf in your web page.
p.s. you'll need to upload the flv/f4v, the swf the html file that contains the embedding code AND, if you use an flvplayback skin, that skin.
Maybe you are looking for
-
Hi, I need help on detailed processing of down payments in following scenarios., Down payment in case of normal billing & where it gets adjusted in equal % in subsequent billing.Like customer pays a down payment of Rs 100 & it gets adjusted in the su
-
My question says it all: search a topic on google, click a hit, and up come pages other than the one I've chosen, and when I try to navigate away, they impose pop ups asking, "Are you sure you want to miss this amazing opportunity?" How to go back to
-
The latest Flash Player update is not working! I need my Flash Player! PLEASE HELP!!! - Whenever I open a website on any browser (Firefox, IE, etc) I receive this message: "Adobe Flash Player 11.5 r502 has stopped working." - When I click "Check onli
-
I have a yahoo account that i want to set up an account for in the MAC Mail application. I do not know what to put in the incoming mail server and the outgoing mail server (SMPT) boxes that are part of the set-up process. Could you please advise? Tha
-
Hello, We are in a project of deploying 10.000 clients into the field. We want to assign a B class IP Pool(178.17.X.X) for this group of users. But as far as I know, CS ACS Win can support an IP Pool of whole C Class at most. Is there a configuration