Importing/exporting opensso configuration

Hello,
We are using the flatfile configuration and we want to export the configuration from one environment and then import it again in the new environment. We want to avoid as much as possible manual interactions to create the different sso instances, site information, realm configuration, datastore configurations,....
For this we have tried already the cli but this is totally insufficient.Further we have tried to export the option of cli export-configuration-serverices and import it or on the same environment or in antohter without success.
Any ideas ?

How about a master consumer replication from current --> new env. Once that's done, you can break the replication if you feel like it.
Ankush

Similar Messages

(newbie) Importing/Exporting proxy service configurations?

Hello,
I'm new to AquaLogic and am going through its tutorial right now. I have a question: After I create a proxy service's flow chart going through all the configuration effort listed here[1], I would like to transfer this proxy service to another AquaLogic instance without needing to enter all this information manually in again.
Is there a way to save perhaps an XML representation of the proxy service (something that specifies all the configuration rules I entered) that I can the subsequently upload into another AquaLogic instance--or another way I can move a proxy service from one machine to another without needing to manually reconfigure it each time?
Thanks,
Glen
[1] http://e-docs.bea.com/alsb/docs30/tutorial/tutTransform.html#wp1065969

Ryan Murphy wrote:
Hi Glen,
I don't know the workshop way (ALSB3.0 only) but here is the console way:
On the main page of the console, go to "System Administration" on the bottom left side.
At the top of the list, you now have your import/export options. Click export. I like to use the "Export Resources" instead of "Export Projects" as it gives you more freedom when importing.
Create a session in your target domain and do the import.What you can also do which I think is rather good, is create a
customisation script for each of your environments to change endpoints
etc. It's a bit of a confusing xml file at first, but it works really well.
Once you've a service deployed, you can export a customisation file also
from the system administration options.
Pete

Import/Export tools has not been installed

Hello,
I've isntalled client of Designer 6i rel.2 The whole installation has passed correctly up to the moment when the installer for 8i import/export tools has to be invoked (the setup write that install tool will be run to install 8i i/e tools and the java-based instaler should appears). The installer do not wake up and tools are not installed. Cannot import repository from previous installation and moreover (AND MORE IMPORTANT) when running Net8 Conf assistant and Net8 Client configuration it finish with GPF ("Program made an illegal operation and will be terminate")
Any sugestions?
Best regards
VooVoo
null

Hello,
I've isntalled client of Designer 6i rel.2 The whole installation has passed correctly up to the moment when the installer for 8i import/export tools has to be invoked (the setup write that install tool will be run to install 8i i/e tools and the java-based instaler should appears). The installer do not wake up and tools are not installed. Cannot import repository from previous installation and moreover (AND MORE IMPORTANT) when running Net8 Conf assistant and Net8 Client configuration it finish with GPF ("Program made an illegal operation and will be terminate")
Any sugestions?
Best regards
VooVoo
null

Java exception: Planning Data Form Import/Export Utility: FormDefUtil.sh

Hi,
We have the following in our environment
Oracle 10gAS (10.1.3.1.0)
Shared Services (9.3.1.0.11)
Essbase Server (9.3.1.3.01)
Essbase Admin Services (9.3.1.0.11)
Provider Services (9.3.1.3.00)
Planning (9.3.1.1.10)
Financial Reporting + Analysis UI Services (9.3.1.2)
I got the following error while using the Planning Data Form Import/Export Utility. Does anyone have any idea?
hypuser@server01>$PLANNING_HOME/bin/FormDefUtil.sh import TEST.xml localhost admin password SamApp
[May 6, 2009 6:25:11 PM]: Intializing System Caches...
[May 6, 2009 6:25:11 PM]: Loading Application Properties...
[May 6, 2009 6:25:11 PM]: Looking for applications for INSTANCE: []
[May 6, 2009 6:25:13 PM]: The polling interval is set =10000
Arbor path retrieved: /home/hypuser/Hyperion/common/EssbaseRTC/9.3.1
[May 6, 2009 6:25:14 PM]: Setting ARBORPATH=/home/hypuser/Hyperion/common/EssbaseRTC/9.3.1
Old PATH: /home/hypuser/Hyperion/common/JRE/IBM/1.5.0/bin:/home/hypuser/Hyperion/common/JRE/IBM/1.5.0/bin:/home/hypuser/Hyperion/common/JRE/IBM/1.5.0/bin:/home/hypuser/Hyperion/common/JRE/IBM/1.5.0/bin:/home/hypuser/Hyperion/AnalyticServices/bin:/home/hypuser/Hyperion/common/JRE-64/IBM/1.5.0/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/hypuser/bin:/usr/bin/X11:/sbin:.
[May 6, 2009 6:25:14 PM]: Old PATH: /home/hypuser/Hyperion/common/JRE/IBM/1.5.0/bin:/home/hypuser/Hyperion/common/JRE/IBM/1.5.0/bin:/home/hypuser/Hyperion/common/JRE/IBM/1.5.0/bin:/home/hypuser/Hyperion/common/JRE/IBM/1.5.0/bin:/home/hypuser/Hyperion/AnalyticServices/bin:/home/hypuser/Hyperion/common/JRE-64/IBM/1.5.0/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/hypuser/bin:/usr/bin/X11:/sbin:.
java.lang.UnsupportedOperationException
at com.hyperion.planning.olap.HspEssbaseEnv.addEssRTCtoPath(Native Method)
at com.hyperion.planning.olap.HspEssbaseEnv.init(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseJniOlap.<clinit>(Unknown Source)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:187)
at com.hyperion.planning.HspJSImpl.createOLAP(Unknown Source)
at com.hyperion.planning.HspJSImpl.<init>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.createHspJS(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getHspJSByApp(Unknown Source)
at com.hyperion.planning.HyperionPlanningBean.Login(Unknown Source)
at com.hyperion.planning.HyperionPlanningBean.Login(Unknown Source)
at com.hyperion.planning.utils.HspFormDefUtil.main(Unknown Source)
Setting Arbor path to: /home/hypuser/Hyperion/common/EssbaseRTC/9.3.1
[May 6, 2009 6:25:15 PM]: MAX_DETAIL_CACHE_SIZE = 20 MB.
[May 6, 2009 6:25:15 PM]: bytesPerSubCache = 5654 bytes
[May 6, 2009 6:25:15 PM]: MAX_NUM_DETAIL_CACHES = 3537
Setting HBR Mode to: 2
Unable to find 'HBRServer.properties' in the classpath
HBR Configuration has not been initialized. Make sure you have logged in sucessfully and there are no exceptions in the HBR log file.
java.lang.Exception: HBR Configuration has not been initialized. Make sure you have logged in sucessfully and there are no exceptions in the HBR log file.
HBRServer.properties:HBR.embedded_timeout=10
HBR Configuration has not been initialized. Make sure you have logged in sucessfully and there are no exceptions in the HBR log file.
java.lang.ExceptionInInitializerError
at java.lang.J9VMInternals.initialize(J9VMInternals.java:205)
at com.hyperion.hbr.api.thin.HBR.<init>(Unknown Source)
at com.hyperion.hbr.api.thin.HBR.<init>(Unknown Source)
at com.hyperion.planning.db.HspFMDBImpl.initHBR(Unknown Source)
at com.hyperion.planning.db.HspFMDBImpl.initializeDB(Unknown Source)
at com.hyperion.planning.HspJSImpl.createDBs(Unknown Source)
at com.hyperion.planning.HspJSImpl.<init>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.createHspJS(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getHspJSByApp(Unknown Source)
at com.hyperion.planning.HyperionPlanningBean.Login(Unknown Source)
at com.hyperion.planning.HyperionPlanningBean.Login(Unknown Source)
at com.hyperion.planning.utils.HspFormDefUtil.main(Unknown Source)
Caused by: Exception HBR Configuration has not been initialized. Make sure you have logged in sucessfully and there are no exceptions in the HBR log file.
ClassName: java.lang.Exception
at com.hyperion.hbr.common.ConfigurationManager.getServerConfigProps(Unknown Source)
at com.hyperion.hbr.cache.CacheManager.<clinit>(Unknown Source)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:187)
... 11 more
[May 6, 2009 6:25:15 PM]: Regeneration of Member Fields Complete
[May 6, 2009 6:25:16 PM]: Thread main acquired connection com.hyperion.planning.olap.HspEssConnection@5f0e5f0e
[May 6, 2009 6:25:16 PM]: Thread main releasing connection com.hyperion.planning.olap.HspEssConnection@5f0e5f0e
[May 6, 2009 6:25:16 PM]: Thread main released connection com.hyperion.planning.olap.HspEssConnection@5f0e5f0e
[May 6, 2009 6:25:16 PM]: Need to create an Object. pool size = 0 creatredObjs = 1
java.lang.RuntimeException: Unable to aquire activity lease on activity 1 as the activity is currently leased by another server.
at com.hyperion.planning.sql.actions.HspAquireActivityLeaseCustomAction.custom(Unknown Source)
at com.hyperion.planning.sql.actions.HspAction.custom(Unknown Source)
at com.hyperion.planning.sql.actions.HspActionSet.doActions(Unknown Source)
at com.hyperion.planning.sql.actions.HspActionSet.doActions(Unknown Source)
at com.hyperion.planning.HspJSImpl.aquireActivityLease(Unknown Source)
at com.hyperion.planning.HspJSImpl.reaquireActivityLease(Unknown Source)
at com.hyperion.planning.utils.HspTaskListAlertNotifier.reaquireTaskListActivityLease(Unknown Source)
at com.hyperion.planning.utils.HspTaskListAlertNotifier.processTaskListAlerts(Unknown Source)
at com.hyperion.planning.utils.HspTaskListAlertNotifier.run(Unknown Source)
[May 6, 2009 6:25:16 PM]: Fetching roles list for user took time: Total: 42
[May 6, 2009 6:25:16 PM]: Entering method saveUserIntoPlanning
[May 6, 2009 6:25:16 PM]: User role is:0
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HP:0005,ou=HP,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:1,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:9,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:3,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:7,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:14,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:15,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:10,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:12,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:13,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:1,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:9,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:3,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:7,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:14,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:15,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:10,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:12,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Skipping unused HUB role: native://DN=cn=HUB:13,ou=HUB,ou=Roles,dc=css,dc=hyperion,dc=com?ROLE
[May 6, 2009 6:25:16 PM]: Hub Roles for user is:991
[May 6, 2009 6:25:16 PM]: Exiting method saveUserIntoPlanning
[May 6, 2009 6:25:16 PM]: Saved the user admin to Planning
[May 6, 2009 6:25:16 PM]: Entering method persistUserChanges()
[May 6, 2009 6:25:16 PM]: Exiting method persistUserChanges()
[May 6, 2009 6:25:16 PM]: Before calling getGroupsList for user from CSS
[May 6, 2009 6:25:16 PM]: After getGroupsList call returned from CAS with groupsList [Ljava.lang.String;@705c705c
[May 6, 2009 6:25:16 PM]: Fetching groups list for user took time: Total: 4
[May 6, 2009 6:25:16 PM]: Entering method persistGroupChanges()
[May 6, 2009 6:25:16 PM]: Exiting method persistGroupChanges()
[May 6, 2009 6:25:16 PM]: User synchronization of 1 user elapsed time: 81, Users: 72, Groups: 9.
[May 6, 2009 6:25:16 PM]: Didnt add child Forms, couldnt find parent 1
Add/Update form under form folder - Corporate
[May 6, 2009 6:25:21 PM]: Propegating external event[ FROM_ID: 7a7ebc1d Class: class com.hyperion.planning.sql.HspObject Object Type: -1 Primary Key: 1454699 ]
[May 6, 2009 6:25:21 PM]: Propegating external event[ FROM_ID: 7a7ebc1d Class: class com.hyperion.planning.sql.HspPDFPrintOptions Object Type: -1 Primary Key: 1454699 ]
[May 6, 2009 6:25:21 PM]: Propegating external event[ FROM_ID: 7a7ebc1d Class: class com.hyperion.planning.sql.HspForm Object Type: 7 Primary Key: 1454699 ]
[May 6, 2009 6:25:21 PM]: Propegating external event[ FROM_ID: 7a7ebc1d Class: class com.hyperion.planning.sql.HspPDFPrintOptions Object Type: -1 Primary Key: 1454699 ]
[May 6, 2009 6:25:21 PM]: Propegating external event[ FROM_ID: 7a7ebc1d Class: class com.hyperion.planning.sql.HspAnnotation Object Type: 14 Primary Key: 1454699 ]
[May 6, 2009 6:25:21 PM]: Propegating external event[ FROM_ID: 7a7ebc1d Class: class com.hyperion.planning.sql.HspAccessControl Object Type: 15 Primary Key: 50001,1454699 ]
[May 6, 2009 6:25:21 PM]: Propegating external event[ FROM_ID: 7a7ebc1d Class: class com.hyperion.planning.sql.HspFormDef Object Type: -1 Primary Key: 1454699 ]
Form imported complete.
[May 6, 2009 6:25:21 PM]: Could not get HBR connection.

Hi,
When I run the Formdefutil command, forms were imported successfully. But I got the following message.
Could not get HBR connection.
What does it mean?
Thanks & Regards,
Sravan Kumar.

Import & Export of VMs.

If i import a VM from one forest and export it to other forest then how virtual switch and DHCP work for this?

Hello Pawan,
You can import/export from any forest to a different forest without any issue.
The only thing that you want to pay attention is the Virtual Switch name.
When you import the VM on the other forest, and Hyper-V detects that you don't have the Virtual Switch name, it will prompt you with error during the import process, then you can fix the issue and choose the existing vSwitch name and everything
should back to normal.
As for the VM hardware configuration, for example, if the VM was running on the former forest with 16 vCPUs and 16GB of RAMs, and then you import the VM on a host with less available resources E.g: 4 physical cores(8 logical), you will have compatibility
issues during the import process, then you need to adjust these settings to match the new host.
As for the vNIC, if you have another DHCP server in the latter forest, it will grab a new IP Address without any problem, and if the vNIC was set to Dynamic, it will get a new MAC address based on the Host MAC Address Range.
Turn on the VM and you are good to go!
Hope this help.
Regards,
Charbel Nemnom
MCSA, MCSE, MCS, MCITP
Blog: www.charbelnemnom.com
Please remember to click “Mark as Answer” on
the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community
members reading the thread.

Import export wizard in struts similiar to microsoft outlook

Hello All,
A newbie here,I've been assigned a task creating an import/export wizard which is same as the wizard that is in the Microsoft outlook express(File >Import/Export Wizard),I was successful except for the mapping functionality.I'm clueless how to do it.My dead line is today end of the day.
I need to do it in struts.I use exadel ide and code in java
Any help in this direction would be greatly appreciated.
pl take a look on this link http://www.microsoft.com/dynamics/crm/using/configure/outlookimport.mspx
point number 8.*Map custom fields* .This part of the wizard is where I'm unable to implement.
pl help me

Hi Everybody,
I'm in a very big prob...pl help me.All my attempts failed.I used javascripts,tigra scripts inside struts to make things work..any clue using java code will also help.I'm giving you the link again.
pls check this link http://www.microsoft.com/dynamics/crm/using/configure/outlookimport.mspx
pl extend ur support.

CSS Import/Export Utility

I'm trying to export users and groups along with their provisions using the CSS Import/Export utility, and I've configured my importexport.properties file to include export.provisioning.all=true, but the exported file does not include any provisioning. Is there a way to fix this?

I agree with Seb. I could not get the 9.2.0.1 utility to work. It was exporting only native groups and the members in each group and not any provisioning info.
Once I installed the 9.3.1 version of the utility, it all worked fine. Make sure you install JAVA JDK 1.5 as the utility needs that version. Just install in same path as the cssimportexport utility so that it doesn't conflict with any earlier versions of java (we had 1.4.2) on that server.
Jeff

CMSDK import/export utility

Can the 9i CMSDK import/export utility be used to export the content of the an iFS 1.1.6 schema to subsequently import into a 9i database? Once imported into the 9i database, then migrate/upgrade the 9i iFS schema to CMSDK 9 for testing purposes?

Thank you for your advice Luis.
What I really need to be able to do is keep my iFS 1.1.6/RDBMS8.1.7.4 development environment intact, while creating a CMSDK/Oracle9i environment for regression testing. I have multiple iFS schemas (6) in our 8.1.7.4 dev database (source). And, what I would like to do is copy one of the iFS environments (including Metadata) out of source and move it into the CMSKD/Oracle9i environment(target). Both environments need to remain accessible, and the source environment needs to remain at version iFS1.1.6 / 8.1.7.4 for regression testing.
Here's a list of actions that I have taken:
1. install oracle9i rdbms software.
2. create 9i database from scratch.
3. install 9iAS software
4. install CMSDK software in 9iAS root.
5. export one iFS schema out of the dev source database. (Using the plain RDBMS export utility)
6. import this schema into the newly created Oracle9i database.
7. Run CMSDK configuration tool to upgrade the imported iFS 1.1.6 schema. <== FAILED HERE!!!!
I run into a problem at the start of the upgrade, when using the configuration tool. It complains that the credential manager username IFSSYS$CM does not exist and fails. So, I simply created a user called IFSSYS$CM in the 9i target database to see if this would allow the configuration tool upgrade process to progress and the result was another error of "Insufficient Privileges". How can manually set a the crediential manager so that the imported iFS schema can be upgraded successfully?
I realize that be doing an in-place upgrade of my entire Oracle 8i source database. I will be able to migrate both the RDBMS and iFS using the installation/configuration tools.
If there is a limitation of not being able to copy (credential manager metadata) an iFS 1.1.6 schema out of the source and into a target database, and then upgrading/migrating the schema to CMSDK/Oracle9i. Then I may be forced into cloning my entire development instance (giving it a different name) and then doing in-place migration of the entire cloned database (all 6 iFS schemas). Our source dev database is 18G and includes much more (probably garbage data) than will be needed for our regression testing. My hope was to take only a subset of the 18G (1 of the 6 iFS schemas) and move it into CMSDK/Oracle9i to perform the testing. We are very low on available disk space and taking only a subset would be a more efficient use.
I have even attempted to use the CMSDK export utility to export the iFS1.1.6 schema. I was hoping this would export the iFS1.1.6 schema, metadata, contents, and credential manager. This was not successful due to missing Java packages not installed in the Oracle8i (8.1.7.4 database).
These are all the details of my dilemma. Can you help guide me in the right direction. I've spent a lot time already fumbling through and have had a number of false starts with my proposed approach. I need someone to tell me the recommended way of approaching my issue. Thanks again.

Import/Export OIF environment Settings

Hi,
I would like to know, if there's way to export or import OIF environment settings from development machine to production machine? And what all configurations can be exported?
Thanks,
Uwaraj.

Hi,
Can you please elaborate what all the setting you want to export/import.....
As per my knowledge in OIM you can only export/import forms. workflows. adapter, email templates, resource object, it resources.
Groups, access policies are not advised to import/export.
Regards
Alabhya Goel

Export Server Configuration - MX6

I need step-by-step instruction on how to export configuration out of CF MX6 STANDARD edition. I've looked a the following link but couldn't locate topic for this information. http://help.adobe.com/en_US/ColdFusion/9.0/CFMLRef/index.html
Thanks in advance

Rick, the link you gave was to the CFML Reference. That won't help you at all in exporting server configurations.
Instead, that's a feature of the CF Admin, and so you'd want to look at the "Configuring and Administering CF" manual, and of course you'd want it for CF 6, not CF9. They're offered at http://www.adobe.com/support/documentation/en/coldfusion/documentation.html. Unfortunately, while the links to the PDFs there work, the links to the HTML versions do not, and sadly it can't even be found via the good ole "internet wayback machine":
But regardless, you'll face a different annoyance even if you find the docs, in that you say you're running CF Standard. That license of CF does not provide a way to export CF Admin settings. That's only an Enterprise feature, found in the Packaging & Deployment option on the left nav bar, for "ColdFusion Archives", which you won't even see in CF Standard.
But here's a trick, which if this is a production machine you should only do at an off hour, when you can stop your web site. If you remove your CF license key (from the "system information" page in the CF Admin), that will revert CF to "Developer" mode, which is the full Enterprise functionality--but limited to allowing only up to 3 IP addresses to connect to CF. That's why you need to not only do this at an off hour, but it would be best if you could stop your web sites, or at least all but that which you need to get to the CF Admin.
Then you can export the settings, and import them into another Enterprise or Developer edition of CF.
As for step-by-step instructions for the process of creating the archives (a car file), there are many out on the web, such as:
http://www.iknowkungfoo.com/blog/index.cfm/2008/4/5/Yo-Adrian-How-do-I-backup-my-ColdFusio n-Admin-settings
http://www.quackit.com/coldfusion/coldfusion_archive_and_deploy.cfm
or a simplified checklist at:
http://www.code-complete.com/code/index.php?/archives/21-Using-Coldfusion-Archives-to-migr ate-datasources.html
Hope that helps.
/charlie arehart
[email protected]
Providing on-demand troubleshooting services for CF and CFBuilder
at http://www.carehart.org/consulting

Best documentation for import/export

Can some one please point me towards the best documentation for import/export.
Thank you very much.

The "Document not found" error is a nice touch on the
above link.The 9.0.2.2 and 9.0.2.6 Portal Export/Import FAQs have moved to the following locations:
Portal 9.0.2.2/9.0.2.3 FAQ for Portal Export/Import:
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/DEPLOY_PERFORM/9023_EXPORT_IMPORT_FAQ_0308.HTM
Portal 9.0.2.6 FAQ for Portal Export/Import:
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/DEPLOY_PERFORM/9026_EXPORT_IMPORT_FAQ_0308.HTM
Also, be sure to review the Chapter on Portal Export/Import in the Portal Configuration Guide (for 9.0.2.6/9.0.4/10g) here:
Portal Export/Import for the 10g (Portal 9.0.4) release is documented in detail in chapter 10 - The Portal Export/Import chapter in the Portal Configuration Guide.
The Portal Configuration guide can be downloaded/accessed at the following links on the Oracle Technology Network:
Acrobat PDF version (6MB): http://download-west.oracle.com/docs/cd/B10464_03/portal.904/b13675.pdf
Link to Chapter 10 (HTML version): http://download-west.oracle.com/docs/cd/B10464_03/portal.904/b13675/cg_imex.htm#i1030999
Best Regards,
Harry

Questions on Subviews and Import/Export in Data Modeler v3 EA1.

I have a few questions about the capabilities of Data Modeler v3 EA1:
1) Is it possible to rename subviews? Would like more meaningful names then Relational_x - Subview_x.
2) Is it possible to save documents at subview level?
3) Is it possible to import/export subsets of data?
4) Having problems importing Erwin 7 .xml file, is there known problems with this import?
Judy

Hi Judy,
1) To rename a subview just right click on it in the browser tree and select "Properties". In the properties dialog change the name and click OK button.
2) You can save a subview as new Data Modeler design - from the File menu select Export -> To Data Modeling Design. In the newly opened dialog select the subview you want to export and click OK button.
3) After saving a subview as new design (see answer #2) it can be imported in some other design (File -> Import -> Data Modeler Design).
4) What kind of problems do you have with import of Erwin 7.* xml file?
Regards,
Ivan

How to import/export data in pl/sql developer

how to import/export data,table script in pl/sql developer.
By using the export functionality i am getting the dump file.I want a sql file.How do i do it?
And i want the data in csv file and table script in a sep sql file.How do i do it?

<li>run your query in "Query Builder"
<li>Right-Click on the Query-Results
<li>Click "Export"
<li>Click on the "Drop-Down" in front of "Format" and choose "insert"
<li>Provide the location and name of ther "sql" file.
If you want output in CSV format, choose "csv" from the "format" drop-down.
HTH

Getting an error while importing/exporting the universe from my BO Designer

Hi,
   I am facing a issue while importing/exporting the universe from my BO Designer to the Server.The error is mentioned below.
   'File Repository Server Input is down'
   Once I click the OK button on this error message, it displays the message
   'Could not import the Universe'.
I tried the check the status of the File Repository Server (Ouput and Input) and also the of the Root Directory on the Physical Server and also my machine.They all have read-write access.
Installed Version of the Universe Designer Client: Business Object XI Release 2 SP3
Installed Version of the BO Enterprise Server: Business Object XI Release 2 SP2
Can you please help me to resolve the issue

Hi,
   The step you have mentioned may not be applicable to my issue as one of my colleagues can import/export the universe from the same server
The second thing is that a DB2 Client v9 is installed on both mine and my colleagues system.The Designer software can recognise the DB2 drivers on his system but it cannot recognise the same drivers on my system.I even checked the versions of the BO software installed on his and my system and they are same.
The only difference is that his machine is a Windows XP Machine and mine is a Network Desktop.
Will any of the above two things will affect the operation of the BO Designer.
Thanks
Prabhakar Korada

Attunity connectors for Oracle in Import Export Wizard in SQL Server 2008 R2

Is there a way we can see the Attunity connectors drivers in the Import/Export Wizard (64 bit) for SQL Server 2008 R2?
Although I made it work for SSIS, I would need these drivers in the Import/Export wizard so as to automate it for numerous number of tables which I want to migrate.
Can the Attunity connectors for Oracle be used in the Import/Export wizard? If so please let me know.
Regards,
Ashutosh.
Ashutosh.

I have 100 tables to migrate. Creating a data flow for each table is tedious and that's why I was looking out for a way to do it through import export wizard so that I don't have to create a separate data source and destination for each table in the Data
flow Task.
Is there a way to loop through all tables and transfer data in SSIS without having multiple sources and destinations created for each table? This also involves a bit of transformation as well.
Regards,
Ashutosh.

Importing/exporting opensso configuration

Similar Messages

Maybe you are looking for