Importing File Issue

I am working on a particular project of importing all the video footage for one day's ride. I am trying to import 4 files, only analyzing color balance and audio. Upon importing the final file nearly when its done , approx. 75%, the importing pauses and all of sudden any video I have imported previously under this event, turns red with a yellow icon on it. I've deleted the event and tried importing the files in a different order, and it doesn't seem to matter, around the 75-85% mark of being completed there is a pause all previous gets flagged and turen red, then it continues on with the the last import, what is going on?
Thanks

I am using Final Cut Pro X 10.0.1, I used my Contour+ action cam that was imported directly to my harddrive. I may have a possible cause, the last video capture, captured @ 1280x720 / 60FPS, captures 1-3 are @ 1280x720 /30FPS. I forgot I was testing to see if there was an actual difference in quality of footage.
Not sure if its possible to import the 60FPS @ 30FPS or down grade, I'm just guessing, this is my very first project in FCPX.
Thanks

Similar Messages

  • Scenario Export /Import Issue: Import file error

    The Procedure scenario when I am trying to import in higher environment, it is giving me error " Import file error" and when I click on Details, it shows following message.
    I am trying to import scenario with INSERT/UPDATE mode and trying to replace with the same version. The scenario is executing fine in dev environment. What could be the cause. I have tried importing the same, 2-3 times ...even on different days with connecting and disconnecting the repository. What could be the reason. I am exporting the scenario from designer/procedure/scenario. using same option, I have exported the scenario many times but did not get any issue so far while importing into higher environment
    &Exception track Trace 1 of 1
    com.sunopsis.dwg.SQLWorkReposException: ORA-00942: table or view does not exist
         at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
         at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
         at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
         at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:953)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1224)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3467)
         at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1350)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:242)
         at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
         at $Proxy3.executeUpdate(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.odi.core.datasource.support.RuntimeClassLoaderDataSourceCreator$StatementInvocationHandler.invoke(RuntimeClassLoaderDataSourceCreator.java:163)
         at $Proxy4.executeUpdate(Unknown Source)
         at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
         at com.sunopsis.dwg.dbobj.generated.GeneratedSnpObjectId.insertAction(GeneratedSnpObjectId.java:271)
         at com.sunopsis.dwg.DwgObject.insert(DwgObject.java:2885)
         at com.sunopsis.dwg.DwgObject.insert(DwgObject.java:2908)
         at com.sunopsis.dwg.DwgObject.createMissingReference(DwgObject.java:6779)
         at com.sunopsis.dwg.DwgObject.correctMissingReference(DwgObject.java:6636)
         at com.sunopsis.dwg.DwgObject.correctMissingReferences(DwgObject.java:7206)
         at com.sunopsis.dwg.DwgDuplicationTools.createMissingRefAndReInsert(DwgDuplicationTools.java:2790)
         at com.sunopsis.dwg.DwgDuplicationTools.importOtherObjects(DwgDuplicationTools.java:2385)
         at com.sunopsis.dwg.DwgDuplicationTools.synonymImport(DwgDuplicationTools.java:1835)
         at com.sunopsis.dwg.DwgObject.importFromObjectLst(DwgObject.java:6205)
         at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java:5705)
         at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java:5365)
         at com.sunopsis.dwg.DwgObject.importFromXmlWithCommit(DwgObject.java:5410)
         at com.sunopsis.graphical.dialog.SnpsDialogImportXml.doImport(SnpsDialogImportXml.java:360)
         at com.sunopsis.graphical.dialog.SnpsDialogImportXml$1.doInBackground(SnpsDialogImportXml.java:1221)
         at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker$1.call(SwingWorker.java:240)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker.run(SwingWorker.java:278)
         at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
         at java.lang.Thread.run(Thread.java:662)

    actdi wrote:
    This error is weird.+1 thats what I was thinking.
    OP - Are you exporting from a Development work repos to an Execution Repos or another Dev Repos?

  • Issues importing file with "copy into document option".

    I am running Framemaker 7.1.  I need to import a .jpg image into my document.  I selected File-Import-File and then selected the file and the "copy into document" option.  This placed the .jpg image into my document.  I saved the document and then closed it.  Then I moved the .jpg image file which I imported into the document to another location.  I then re-opened the document and I get the following message:
    "Missing File - Looking for ../xx.jpg".  I select the "Skip This File" option and then "Continue".  When I scroll down through the document to where I had previously imported the .jpg image and when I get to that page, I get the following message popup, "Cannot display some imported graphics.  The images will appear as gray boxes."  Once I select "OK" on the popup message, the image is displayed as normal.
    Could someone help explain to me how I can actually copy the image into the document without any reference to the original file pathname.
    Thanks.

    I was able to activate the hypertext.  When I click on the hypertext for the imported picture reference, the original document opens up but I don't see anything to indicate the imported reference.  The bottom line is that I want to delete the imported references since I don't want the references in the document. 
    Somewhere buried in the framemaker document are these two imported references and I want to remove them.  How do I do this?
    Keep in mind that when I click on the hypertext imported reference, it switches to the original document, but I don't see anything that indicates an imported reference so there is nothing for me to delete.
    Thank you.

  • Premiere Pro cs6 - Workspace video pane remains blank when trying to view imported files

    Hello,
    I'm currently working in Adobe Premiere Pro CS6. When I import my media into my workspace and drag it onto the timeline, the preview box where you can review your cut video remains black. Double clicking on the imported file gives the same result. I was initially importing .jpg files (about 300kb size for each) so I tried importing various other image formats - .png, .tiff, etc... I have even imported a movie file into my scene to determine whether the issue was with my content format. With the video, the audio plays fine, but the video remains blank in the preview box. I have tried rendering my workspace and changing my initial project settings, but to no avail. I went into my preferences for Premiere and from what I can determine, everything looks fine.
    I'm running the software on an HP Pavilion, Windows 7 intel i7, 8gb ram, with a nvidia 650M 2GB card. Any help would be greatly appreciated. Thanks!

    Hi,
    Have you tried to change your Video Renderer? It would be under Project > Project Settings > General. Switch the option to Mercury Playback Engine software only and see if it helps.
    Thanks,
    Rameez

  • After effects CS3 crashes when importing file

    system specs are as follows
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_qfe.061219-0311)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Inc.
    System Model: Dell DM051
    BIOS: Phoenix ROM BIOS PLUS Version 1.10 A05
    Processor: Intel(R) Pentium(R) D CPU 3.20GHz (2 CPUs)
    Memory: 2046MB RAM
    Display Devices
    Card name: RADEON X600 Series
    Manufacturer: ATI Technologies Inc.
    Chip type: RADEON X600 (0x5B62)
    DAC type: Internal DAC(400MHz)
    Device Key: Enum\PCI\VEN_1002&DEV_5B62&SUBSYS_06021002&REV_00
    Display Memory: 256.0 MB
    Current Mode: 1280 x 960 (32 bit) (60Hz)
    Monitor: Hitachi CM812
    Monitor Max Res: 1600,1280
    Driver Name: ati2dvag.dll
    Driver Version: 6.14.0010.6677 (English)
    Sound
    SigmaTel Audio
    Alright, now that's out of the way, heres the error i get.
    Adobe After Effects CS3 has encountered a problem and needs to close. We are sorry for the inconvenience.
    Error signature
    EventType : BEX P1 : AfterFX.exe P2 : 8.0.0.298 P3 : 465d3a47
    P4 : AfterFX.dll P5 : 0.0.0.0 P6 : 46348371 P7 : 00111a69
    P8 : c0000409 P9 : 00000000
    This happens every time i try to import any kind of file. And I'm running the trial version of AE btw.
    Now heres the things i have already tried.
    1)Reinstalling After Effects repeatedly.
    2)updating quick time
    3)Deleting the pref file
    4)removed any and all plug-ins
    5)Deleted the OpenGL file
    6)changed by screen resolution.
    7)closed down anti-virus programs
    8)Tried various ways of importing files, like drag and drop
    9)tried importing different files.
    10)Restarting my computer after attempting the all above^
    I have also been to the general specialist website already thank you very much.
    Edit: Now i have also tried uninstalling quick time and all of the video codec packs on my computer, this also didn't help (i did remember to restart afterwards)
    Edit: Also, i started a new thread because nothing in any of the other threads on this same or similar errors was at all helpful to me.
    edit3: i might also add that i have after effects 6.5 and it works just fine, though its much older.

    You can contact Adobe Technical Support for help with issues like this. You are entitled to a certain number of free calls for "installation issues, basic usage questions, and troubleshooting unexpected behavior for documented features".
    For information on what free technical support you're entitled to, see this page:
    http://www.adobe.com/support/programs/customer/gss.html

  • Problem related to OSS Note - importing file problem

    Hi,
    I m facing an issue while implenting an oss note 430580 , i have to import files from sapserver.
    but i don't know how to do it.
    below is the description of my problem.
    Import the following files from SAPSERV:
    /general/R3server/abap/note.0430580/K000687.PLM
    /general/R3server/abap/note.0430580/R000687.PLM
    Import the two files into your system.
    For more information on SAPSERV, see Note 13719.
    Can any one tell me how can i get rid out of this prioblem.
    whether this is possible or BASIS Team can only do this.
    system details
    Operating system     SunOS
    Machine type         sun4u
    R/3 release 4.6C

    Well, these files are part of the zip.file which belong to the note. This is part of a regular transport and is normally done be basis. The data and the cofile (K....PLM & R...PLM) should be imported into your system. Before doing so they have to be transferred to the file server. Better let BASIS do these kind of things.

  • Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. W

    Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?

    Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access.  You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  You are welcome to post any specific errors discovered to this discussion.
    For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

  • Failing to import files correctly from Handycam DVD camera

    Hi,
    I try to import files directly from my Sony Handycam DVD camera to PRE8 by inserting the DVD in the PC.
    There is only audio at the first part of every file. Approximately the first 20 - 30 % of the total video length. The sound does not appear neither in playback in W media player, Quick Time, W movie maker or PRE. Why am I missing the audio?
    What is the best way to import for editing in PRE?
    What is the best file type for editing in PRE?
    What is the fastest way for converting, if needed?
    My handycam camera provides wide screen option. But the wide screen in PRE8 seems to be "wider" than the camera...

    Seems like this got the answers to most of my problems
    That "More Like This" area can really work sometimes. Glad that you saw it, and that it helped.
    If you have more issues, please let us know and good luck,
    Hunt

  • Indesign / Xpress unexpetedly quits on importing files intel mac

    You probably wonder, Why does he post this here?
    I will explain the problem..
    We have a customer who owns an intel imac on with he uses Indesign CS2 and Xpress 6.52. He has files on an apple server version 10.3.9.
    When he creates a new document en starts to import files the applications unexpectedly quit when browsing a folder with contains xpress 4/5 files.
    You can see the files have scrambled icons. Suddenly grey block come up on the screen and the application quits.
    This problem is ONLY when connecting to the server using AFP. Via SMB no problems.
    When the browsed folder is on de local desktop, no problem.
    If we use indesign and switch the file browsing to the Adobe dialog there are no problems either but then the xpress files are not shown.
    We have tried an fresh system on the imac. We have tried this on an other intel imac same problems.
    We have tried it on our own 10.4.8 server same problem.
    have cleared al caches, reset default app's database, same problem.
    Does someone seen this problem before?
    Thanks in advance.
    Eelco Krips

    Your first major stumbling block is that neither Adobe (unless you use their InCopy or VersionCue) nor Quark (unless you use their QPS) support working directly off of a fileshare, period. Really, they don't.
    Keep in mind they don't state it in big bold letters on their front page(s), you have to look for it, but if you call them for support, after running around for a while they'll tell you it's not supported.
    Doesn't matter that *sometimes, in some cases* it works. Or that it used to work in some past combo of client/server OSen.
    Never mind that you're using Rosetta which adds a real and extra layer of potential complications.
    http://www.adobe.com/support/techdocs/320771.html
    http://www.adobe.com/support/techdocs/320318.html
    some discussion of the quark issue:
    http://www.quark.com/service/forums/viewtopic.php?t=1013&postdays=0&postorder=as c&highlight=networkvolvolume&start=60&sid=e42f48a7ef49f870cf541487febb832d

  • "Import Files into iTunes" automator action not working

    I'm having an issue with a simple automator action, "Import Files into iTunes". It's the only thing I have in the workflow but when I drop audio files onto the application, the action encounters an error. In trying to figure out what was amiss, I read that there was a version number conflict after iTunes 10, so I followed the instructions here but they did not fix the issue. Does anyone have a suggestion on what to try or how to diagnose the issue? I'm running Yosemite (10.10.2) and iTunes 12.1.0.50. Thanks for the help!

    Yeah, I'd happy provide details if I saw them. The message itself just says, "The action “Import Files into iTunes” encountered an error." Is there a way to get more information on the error?
    Thanks!

  • Import files not successfully uploading/rendering

    I'm having trouble importing files successfully. Just tried uploading a batch of about 20 clips. Maybe 3 actually successfully rendered and appeard with a corresponding thumbnail in my Event window. The rest appear as an image of a white document icon and yellow caution sign on a red background. I never used to have this issue. Recently I installed OS X Mavericks and have really struggled to succesully import clips. Sometimes I have to upload 5, 6 or even 7 times to get all of the clips I need into the events page.
    Anyone have advice? Thanks!

    Nope. Not a pirate. Admittedly, I have been using this version for some time, and I don't get prompts for software updates. I'll make sure I do this now. Didn't realize the solution was that simple. Thanks for your help.

  • Import files into iTunes song title is truncated

    When importing files using the "File - Add File To Library" function for songs with very long title names, the song title is being truncated at about 35 characters upon import into Itunes. Is there a way to stop this from happening?

    iTunes supports a maximum of 40 characters for file and folder names, inclusive of file extension for the files that it manages.
    Tag properties such as Artist, Album, and Name are typically limited to 256 characters. Files in .wav format don't have a tag so it is usually these that cause difficulties when reimported to iTunes. The filename including any leading track number is used as the name of the imported track and all other fields are left blank. If iTunes was managing the track names in a previous library then the 40 character limits will apply reducing what can be read from the path and on reimport iTunes will typically move the files from their original location into the Unknown Artist\Unknown Album folder discarding more potentially useful information. If this is the issue, but you have the files somewhere in sensible artist and album folder with longer filenames, then turn off the options for Keep... and Copy... before adding to the library and use my script TagFromFilename to reconstruct missing information from the file path.
    If the issue is simply how iTunes names the imported track when viewed in Windows Explorer, and it has the complete information in the iTunes interface, then you can use my script ConsolidateByMovingLong.
    tt2

  • Import files has only imported audio, not video

    I used FCP7 to capture some footage from DV PAL.
    I then went to FCPX, chose "Import Files" and selected the 2 clips I had captured. I chose to copy into the FCPX events library. FCPX only imported the audio, and not the video.
    This is the movie info:
    DV, 720 x 576 (768 x 576), Millions
    16-bit Integer (Little Endian), Mono, 48.000 kHz
    16-bit Integer (Little Endian), Mono, 48.000 kHz
    Is this a bug?

    Hi Charlottehjc,
    Welcome to Adobe Forums.
    Is it happening with a specific .mov file or with all the .mov files.
    Right click on the video and choose new sequence from clip, then check if the issue persists.
    Also please mention are you using Windows or Mac and the version of Premiere Pro.
    Thanks

  • Import Files as Projects makes other projects disappear

    Hi,
    I'm new to these forums and new to Aperture. I would really like some help with this issue. I have searched the forums and while I've found one other post with the exact problem no one has posted an answer...I hope for better results.
    I work in IT so I am pretty savvy, as such I will try to explain the issue as thoroughly as possible.
    ISSUE: I have created Folders at the root level of my Aperture Library. Inside those Folders I have imported pictures with the standard import method, and as expected it has created projects for each import. After realizing that I could import "Files as projects" I tried that option. I had about 9 projects in the folder and after importing "Files as projects" for several new folders I was left with only a few new projects and several of my existing projects were gone. If I click on the folder that contains the projects all the pictures are still there, but the organization of having them in their individual projects was lost.
    At this point I started over. Rather than taking the time to import one folder at a time, I decided to try the "Import Folders as Projects" option from the start. I had about 17 folders I was importing and after getting the successful import message I was left with only 8 projects, rather than 17 as expected for each of the folders imported. However, once again, ALL the pictures where there in the root folder.
    I tried a third time. I wiped the library clean and started over and I got the same results.
    Once again, I'm a new aperture user and I would like to transfer my MANY pictures into Aperture but If I have to import 1 folder at a time then it will take me months. Also I'm not too confident with the Library structure as I don't know if this is a corruption in the Library or another issue. It makes me worried that months down the line when I have all my pictures in aperture I will have to start all over.
    Visual of the way I'm trying to organize (Of course there are MANY more projects in each folder):
    Canon SD300 (This is a Folder)
    Sample Project 1
    Sample Project 2
    Sample Project 3
    Sample Project 4
    Canon 20D (This is a folder)
    Sample Project 1
    Sample Project 2
    Sample Project 3
    Canon 5D (This is a folder)
    Sample Project 1
    Sample Project 2
    Sample Project 3
    Thanks in advance to anyone that can help.

    Hi rwboyer - I just realized that I have read many of your posts on your website regarding organizing your pictures on Aperture, very nice. I have fixed/figured out what was going on....and to tell you the truth I feel kind of stupid I hadn't checked.
    ANSWER: In the Projects tab the setting was set to "Recent Projects" as opposed to "All Projects". As soon as I flipped this setting they all magically appeared.
    I don't know how Aperture defines "recent" but considering that I imported all at the same time I was not thinking any one project was more recent than another. Oh well it's fixed, I'm happy and very excited to start using Aperture. Thanks again for the response.

  • 'Import file parsing exception' while importing BIAR file

    Hi All,
    We use Java WebServices SDK for integrating our product with Business Objects. For installing the reports we use the InstallEntSDKWrapper jar to copy the BIAR file containing the reports on to the BO server. Till now we were using BO XI R2 and everything works fine.
    But now we have decided to upgrade to BO 3.0 and the reports install no longer works. Here is the error that we get -
    [InstallEntSdkWrapper.main] Connecting to CMS rwc-1950-120:6400 as administrator
    [InstallEntSdkWrapper.CmsImportFile] Exception: Import file parsing exception
    curred : 'Type info incomplete'
    [InstallEntSdkWrapper.main] BIAR File could not be imported
    Any idea what might be going wrong here? We are trying to import the same BIAR file that were created with the earlier BO version to the 3.0 version server. Couple of questions that I have is -
    1. Do we need to repackage the BIAR with 3.0 before attempting to install it? Are there any issues with trying to install a BIAR which is of older BO version?
    2. Do we need to add/modify any library (jar) in the runtime to get rid of the exception?
    Thanks for all the help.
    Regards
    Manas
    Edited by: Manas Mandlekar on Dec 23, 2009 1:34 AM

    Lucas,
    I have not seen this issue before. We'll investigate and contact you directly for more info. I'll post the resolution back to this forum once available.
    Doug

Maybe you are looking for