Importing files of the same name in different folders?

Yes, yes, we all know about the RAW+JPEG and whatever else argument.
But why should I be prevented from importing identical files that are stored in different folders? Who cares if they are in the library twice?
I haven't figured out if it's just a name issue (don't think so) or if the files have to be truly identical.
I *think*, but am not sure, that you can import separate files of the same name but that are actually different images. Can anyone verify?
Lee Jay

Bob,
It appears that you can import duplicate named files by unchecking the "ignore Duplicates' box--the first time you import files (or a file) from a folder. But, if you go back to that folder to use 'import' to update, then the import takes place immediately bypassing the screen with the "ignore Dulicates' box on it--I presume it assumes that you would not want to change any of the original settings for an import from a given folder.
The point is you had better leave it unchecked always if you want duplicates ingested intially or later on reimport.

Similar Messages

The same file with the same name need to call two RFC's with the sequence

i have to pick up the same file with the same name and call the two RFC in sequence
scenario.i have xxx.txt file.file should be proces first calling the first rfc .
I created two different communication channels
for the first sender file communication channel i should not use processing mode archive,delete,Test
and only option is set read only.
if i set the read only the file ..then i can not use the same file again to call second RFC.
how we can acheive the above scenario?
Regards,
Hyma

If you want to file need to be picked up twice in same folder, it seems it is hard for PI adapter to achieve it, you should look for API's that control adapters availibility.
But if you have different folder, then it make your scenario simpler since you can process first time, then output to another folder, configure another adapter to pick up from different folder.
Regards
Liang

Create a dir if there exists a file with the same name

Hi..
I want to create a directory with file.mkdir(). But I recognize a problem when there is allready a File with the same name.
Is there any solution to handle a dir and a file with the same name?
eg: Dir "C:\Windows" and File "C:\Windows"
wami

This explains it... use "java Test2 asdsfd" for example. While this example doesn't show it,
if you try to create a dir with another slash on it c:\blah\ , it still can't be done.
import java.io.*;
public class Test2
public static void main (String args[]) throws Exception
     if (args.length < 1){
     System.out.println("Test2 [name]");
     System.out.println("creating bogus file " +args[0]);
     FileOutputStream fo = new FileOutputStream(args[0]);
     fo.write(55);
     fo.write(55);
     fo.write(55);
     fo.close();
     File x = new File(args[0]);
     if (x.mkdir()) System.out.println("made dir " + args[0]);
     else System.out.println("failed to make dir " + args[0]);
     System.out.println("deleting file " + args[0]);
     x.delete();
     if (x.mkdir()) System.out.println("made dir " + args[0]);
     else System.out.println("failed to make dir " + args[0] + " again !");
}

I'm trying to put movies onto my hard drive but i can't put the files with the same name onto the hard drive , finder won't let me change the name

I'm trying to put movies onto my hard drive but i can't put the files with the same name onto the hard drive , finder won't let me change the name. What am i doing wrong?

Make a new folder and put them in that different folder. Then the names can be the same as others already on your drive.

Dng and tif file with the same name, in the same Lightroom folder

If I have both a dng and tif file with the same name, in the same Lightroom folder, I can only see and access one of them. Is there a setting I can change in order to see both of them?

If you can only see one of them, which one can you see?
Was the DNG and the TIF imported at the same time?
How are you trying to "access" the files?
The more details you can provide, the more likely it is that someone will be able to help you.

HT2905 I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

In iTunes(on a Mac or PC) just tap on 'Albums' rather than 'Artists' and you'll see them all together.
You may find that there are songs mislabelled. In which case right tap on the Album or Artist and tap 'Get Info', then change to the correct name and the songs will join the rest of the songs for that Artist or Album.
Then resync with your iPhone and all will be well.

How do i find the app ibooks on a Mac to download? Is it the same name or different now?

How do i find the app ibooks on a Mac to download? Is it the same name or different now?

There is no app for reading iBooks on a Mac!

How can I overwrite a file with the same name in Content DB?

Hi All,
In Content DB if I upload a file with the same name as a previous one, the application shows the warning message:
" ...You cannot upload "XXXXXX.doc" to "Test 1" because an item with the same name already exists ..."
And the alternatives are "Create Version" or "Cancel" the operation. Is there any way to overwrite a previous file as we can do it in Oracle Files ?
Regards
Harvey

Hi All,
Can anybody from the Content DB product development answer this question?
Regards
Harvey

After installing latest update Realplayer recording no longer works, I think Mozila is using a library file with the same name

After installing the latest update to Firefox onto Vista operating system the record part of real player no longer works, I think Mozila and Real are using a library file with the same name and the Mozila update is overwriting a Realplayer library file.

I was giong to say, "Help me, Adobe Joe Kenobi", but it looks like you're growing a beard waiting for an answer, too.
The same thing happened to me today. I trusted the "update" message since it was from Adobe, and apprently did so at my own peril. Now I get the "failed to load Core dll" message with a secondary reference to a memory address.
Just an observation, but what good are these forums when there are no answers? I see this problem as "Caused by Adobe Update", and would expect them to troublshoot and offer up a remedy. Since you've been waiting over two months with no response, I suppose it's time to trek off wasting more of my precious time to fix their problem. If I find the solution, I'll post it back to you.
May the Force be with you.
Mark

Query parameters with the same name and different values

According to HTTP, multiple query or post parameters with the
same name and different values are permitted. They are transfered
over the wire in the following format -
name1=val1&name1=val2&name1=val3
The problem is that I can't see anyway of assigning multiple
parameters with the same name and different values to the request
object of mx.rpc.http.HTTPService. I have tried using the
flash.utils.Dictionary object as it does strict key comparison but
that doesn't work too. I have tried setting an array of values to a
property of the request object but that sends the request to the
server in the following format -
name1=val1,val2,val3
The java servlet engines throw exceptions when they see this.
Any help would be greatly appreciated.

If you're not on 8.1.4 move there. 8.1.3 had limitations in the wsrp
release.
wrote:
I have an html select box that contains several values, and multiple
selection is enabled. When my code runs as a remote portlet, the
following is showing up in the soap monitor when I select multiple
values and submit the form:
<urn:interactionParams>
<urn:portletStateChange>cloneBeforeWrite</urn:portletStateChange>
<urn:interactionState>_action=addEmployeesToGroup</urn:interactionState>
<urn:formParameters
name="P62005wlw-select_key:{actionForm.selectedEmployees}OldValue">
<urn:value>true</urn:value>
</urn:formParameters>
<urn:formParameters
name="P62005wlw-select_key:{actionForm.selectedEmployees}">
<urn:value>beatest1</urn:value>
</urn:formParameters>
In this case, I selected beatest1 and beatest2, but only beatest1 comes
through to the remote portlet. Is this a known bug, and, if so, is
there a patch or workaround available?
Thanks in advance,
Andy

For each loop in case of more file with the same name

Hi, guys how works ForEachLoop in case of double file? Let's say that we got five excel file. A.xls, B.xls, C.xls, D.xls, A.xls. We got two file with A.xls. I'm going to assume that both file will be loaded. It's correct?
I'm asking this because I need to check if I got two file with the same name ( I got hundreds of file to load). And in the same time I need to avoid to load two file with the same title ( cause I could double the data)

If there are duplicate file names in subfolders then you should fill the variable with the complete path. See C in this images:
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

How do I make Applescript to compress 2 filez with the same name?

Hello guys and thank you for reading this!
I don't know a lot about programming, but i believe applescript can save my life. What I need is.
Detecting 2 files with the same name, but differnt extension. (song 1.jpg, song 1.mp3)
Compressing those 2 files into a single .zip (In the end I would have song 1.jpg, song 1.mp3 and song 1.zip
And that's it! I know its pretty simple, and I've seen the "Create Archive" in automator, but I don't really know how to tell him which files to Compress.
Thanks again!

Hi,
Try this script :
set sourceFolder to choose folder
tell application "System Events"
      {name, name extension} of (files of sourceFolder whose name extension is not "zip")
      my compress2FilesSameName(the result, sourceFolder as string)
      repeat with i in (get folders of sourceFolder) --check in subfolders
            {name, name extension} of (files of i whose name extension is not "zip")
            my compress2FilesSameName(the result, path of i)
      end repeat
end tell
on compress2FilesSameName(tList, tFolder)
      set tnames to item 1 of tList
      set tExtensions to item 2 of tList
      set tc to count tnames
      set j to 1
      repeat while j < tc
            tell (item j of tExtensions) to if it is not missing value or it is not "" then
                  set n1 to (count) + 2
            else
                  set n1 to 1
            end if
            tell (item (j + 1) of tExtensions) to if it is not missing value or it is not "" then
                  set n2 to (count) + 2
            else
                  set n2 to 1
            end if
            set name1 to item j of tnames
            set name2 to item (j + 1) of tnames
            if (text 1 thru -n1 of name1) = (text 1 thru -n2 of name2) then -- same name
                  set tFile1 to quoted form of POSIX path of (tFolder & name1)
                  set tFile2 to quoted form of POSIX path of (tFolder & name2)
                  set zipFile to quoted form of POSIX path of (tFolder & (text 1 thru -n1 of name1) & ".zip")
                  do shell script "/usr/bin/zip -j " & zipFile & " " & tFile1 & " " & tFile2
                  set j to j + 2
            else
                  set j to j + 1
            end if
      end repeat
end compress2FilesSameName
if an archive already exists with the same name (in the parent folder of the files to compress) , the ZIP command overwrite this ".zip" file.
Example with "song 1.jpg", "song 1.mp3" and "song 1.zip" :
If "song 1.zip" doesn't exist, the ZIP command create the "song 1.zip" file.
If "song 1.zip" exist, the ZIP command overwrite the "song 1.zip" file (it will not create a new archive).

Cloning OS2 HDD to USB stick hangs at a file with the same name ???

Hi,
I'm dragging my MacIntosh HD icon to a large USB stick in order to clone it because I'm going to install OS X Tiger onty my iMac G3/400 DV SE. The copying initiates, it starts, and after a few hundreds of MB's a small window pops up with this remark (translated from Dutch) :
" The file XXXXX cannot be copied because another file with the same name exists already." The window has two buttons : STOP and Continue. No matter which button I click, the process stops and I'm left with a few hundred MB on my USB stick. Deleting the "double" file doesn't help because a few minutes later another one pops up.
How is this possible? The USB stick is completely empty! Can anybody tell me what's going on and how to stop this, otherwise I'll never be able to clone the HDD.
Thanks for your kind information,
Paul

It was a bug in Classic OS, which was manifest in certain circumstances. My workaround was, at that time, to isolate the rascal (was possible, like in your case), eliminate it, then add it later.
Such events may occurs with Mac OS X files too, I cannot figure out why. One or two apps in my software archive usually do that.
another workaround it to archive it (.zip now, .sit in classic Mac OS), check whether applicable.

How to open a file with the same name?

Hi, now I practicing making web pages where I put sample codes in one directory and I copy them to edit.
The probrem is, I couldn't open one file while I'm opening another file with the same name.
Is it possible to open a file with the same name in Dreamweaver?

That could be a very error prone practice.
May I suggest you take advantage of DW "Snippets" feature instead.
Simply save any blocks of code you will reuse regularly as snippets,
and give each one a descriptive name you like.
Then you can simply place your cursor in code view where you wish the code,
and click insert on the selected item from the snippet panel.

Batch replace placeholders to files of the same name?

Hello,
I'm designing a photo slideshow in AE and while I'm awaiting the final images, I'm creating a comp using precomposed placeholders.
I've named the placeholders 'Image_01', 'Image_02' etc. So, if I name the image files to match, can I tell AE to relink all placeholders to the file of the same name? I'm going to have quite a lot of images so this would be such a time saver compared to relinking each one individually!
Thanks

Simply create a dummy image set externally and use that, then swap it out. AE doesn't care what the content is, it only looks for a file path.
Mylenium

Importing files of the same name in *different* folders?

Similar Messages

Maybe you are looking for

Importing files of the same name in different folders?