Importing FLV into FLA - No sound...

I'm attempting to embed a 10 second FLV video clip (created
in Final Cut Pro) into my FLA. After matching the frame rate
(30FPS) the video plays back fine, however, there is no sound. I'm
relatively new to Flash, so any suggestions would be appreciated.
Thanks

I think this may be a compatibility issue... try exporting
the video as an AVI file.

Similar Messages

Importing FLV into FLA?

Is there ever a time you would want/need to import a FLV into
Flash over
some other video format?
Thanks.

I think this may be a compatibility issue... try exporting
the video as an AVI file.

Trouble importing FLV into flash - keep gettingan error

Hello all, I'm hopping that someone else has had this problem
before. I'm a long time user of Flash but have just downloaded the
the newest version (CS3) to try it out. I was really looking
forward to the video capabilities. ANYWAY, I'm on a new IMac,
running OSX version 10.4.11. I downloaded and installed the newest
version of flash. I created an FLV with some video that I had and
I'm attempting to import it into a flash file. I get through all of
the steps and it appears to be importing but then I get this error.
"Error opening file; Library/Application Support/Adobe
FlashCS3/en/Configuration//JavaScript/DeployVideo.jsfl" I went to
this location on my computer and the "Adobe FlashCS3" folder isn't
even there. It's like it wasn't even installed. I've re-installed
the software twice. Anyone know what the deal is. Thanks in
advance.
Brian

redsoxsrule wrote:
how do you convert it to a prores file in compressor. I cant figure out that program at all.
If you have a movie file that you wish to compress, launch Compressor.
Once Compressor is open, go to the upper left-hand corner of the project window and select Add File.
It will open up a window in which you can browse all available storage spaces.
Select a file. Once you have done so, then assign a conversion setting from available ones and a destination for the encoded files
Hit submit.
There are dozens of free tutorials on the internet.

Importing flv into CS6 issues

I brought this up durring the pre-release but still can't seem to get any resolution to the fact that perfectly valid flv files that play just fine accross multiple other software, give a "file haas nsupported compression type" error when trying to import into Premiere. I have recieved this with other formats in the past that required me to install additional codecs, but I would think flv being native to Adobe should import. In CS5 I had similar issues but used to be able to import them into AE and then bring the AE sequence into PP as a work around, but can't seem to make that work in CS6. I noticed in searching the forum that this was an issue for many in older versions, but didn't see any recent ones or any real solution. Any insight would be appreciated!

FLV support is only partial, as there are several "flavors" of FLV. My memory is cloudy, but IIRC, FLV's with Sorenson Spark will not Import, where others with CODEC's, such as On2 VP6, etc. will. FLV is but a container, like .AVI, but with far fewer possibilities.
For the FLV's, that do not Import, which CODEC was used?
Good luck,
Hunt

Not able to import .FLV into Welcome Page in Acrobat Portfolio

Hello,
I would like to import either an FLV or an SWF file into the Welcome Page of an Acrobat Portfolio. It does not work if I import an FLV, and it only half works if I import an SWF.
I've put together a video illustrating the problems I have. I am not sure if 1. my expectations are too high, 2. there is a bug in Acrobat Professional, or if 3. There is a mistake in the documentation.
http://wemads.com/adobe/
The help file referenced in the video is:
http://help.adobe.com/en_US/Acrobat/9.0/3D/WS8C3A613D-D486-49ff-97E9-D3E0984D0E74.html#WS3 B2E1248-62A9-4e86-8C67-8813609EEC8C
Thank you!
Nick

Hi,
Use below utililty
java oracle.jrad.tools.xml.importer.XMLImporter SupplierLovRN.xml -username apps -password $PASSWORD -dbconnection "(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=$db_host)(PORT=$db_port))
(CONNECT_DATA=(SID=$TWO_TASK)))" -rootdir ./ -rootPackage $HOME/stoplight/xxx/oracle/apps/pos/stoplight/webuiRegards,
Gyan

Sound import problem into iMovie through sound jack.

I am attempting to transfer sound into iMovie from an external audio tape recorder through the sound import port on a Power Mac G4 mirror door tower running Tiger. When I do this the sound ends up in the time line viewer and looks normal but when I attempt to play it, the volume is very low. It is so low you cannot even make out what it is. Another clip in the time line from another source plays at the normal volume. I also raised the gain on the imported clip to the highest level and still it was very low.
To record the audio above I did the following:
Clicked Media, and then clicked the Audio button at the top of the Media pane.
Clicked the Record button. The recorder was playing the sound and plugged into the audio input jack of the G4.
Is this the correct way to do this? If no what do I do?
Help Please
Thanks much!

For a more reliable way to get sound into a Mac, it's worth getting a USB input device (..I use one of these Hercules Muse things, which looks like a giant doorknob)..
..but there are others like the "iVoice" and "iMic".
You can plug in virtually any audio input (..line level or mic level, so there's no impedance-matching problem..) and the audio always enters the Mac at optimum level ..you simply have to choose the USB device as the source of the incoming audio in the System Preferences>Sound pane.

Insert FLV into fla with flv on a streaming server

I am stuck i need to insert an fla which is on a steaming
server, i just have the link to the fla on the server, but not very
good at programming, i know how to put a component for flv in, but
then do i need to add code or??? can anyone please help

use the flvplayback component. in the properties panel you
can choose the skin (with the controls you want) and the path to
your flv.

Importing mp4 into Flash 8, converting to FLV

I just finished taking a Flash Video class where I understood
I could import an MP4 and convert in to an FLV using encoding tools
that come with Flash Professional 8. However, I opened a new FLA
just now and tried to import an MP4 (File -> Import Video),
Flash would not recognize the sample MP4 I have sitting on my
desktop.
I downloaded a demo copy of On2 FlixPro and it did recognize
the MP4, is converting it to an FLV as I write this.
Did I misunderstand about importing MP4s into Flash 8
Professional? Is it in fact not possible. Or might there have been
something I didn't do or didn't do correctly before importing? If
so, what might it have been?
Thanks in advance.

chris_whalen,
> I opened a new FLA just now and tried to import
> an MP4 (File -> Import Video), Flash would not
> recognize the sample MP4 I have sitting on my
> desktop.
The MP4 file extension does not appear in the filetype
filter of the
Import dialog, but if you select "All Files (*.*)," that
should work. I've
imported MP4s (they're MPGs, after all), but the extension
doesn't appear
under the "All Video Formats" choice. (I'm hoping this is
what you mean by
"would not recognize," anyway.)
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Does the FPS in the .fla document effect the FPS in an imported .flv?

I think this may be related to another post I have, but I'm
not sure?
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=194&threadid=1265662&CF ID=45109516&CFTOKEN=f5a4ce0585fae4f3-66834EE8-E724-5FA7-C13B0CE0CCCB7A67&jsessionid=48305c 133dfd755d2f3b
Does the FPS in the .fla document effect the FPS in an
imported .flv? I notice the default FPS in a .fla is 12, but i
think most of my imported .flv are about 30 fps, will this effect
anything or does the flv overwrite the fla?
Thanks!

The FLV will play slow or fast if the rate is not the same as
the fla file. If you import the file but select the progressive
streaming method, the frames rates are separate for the flv and fla
and don't effect each other. That is the method you want to choose
most of the time, and it doesn't require a special server.

After Effects composition is imported into AP without sound

Hi, everyone
I've got a really frustrating problem with AE and AP CS4. Today AE has decided it will no longer render my composition that I spent days building. It's really nothing fancy, but it has lots of .MTS files, as well as some .mp3 ones, and I have just come across a post today saying that I should have converted the .mts before bringing them into AE. The thing is, although it sometimes complained when I was doing some test renders, it would nonetheless give me some stuff. Well, not today - it crashes from the first frames of the comp.
After pulling my hair out, I was hoping I could import the comp into AP and render from there. Up to a point, this works, because it does render and there are no more errors about "after effects error: error (4) reading frame from file (86 :: 2)".
However, my comp does not have any sound... is that meant to be or can Premiere be persuaded to import the sound, too?
Thank you so much for your help in advance because I am literally pulling my hair out...

Thanks for this, Todd. I will give the updates a go (EDIT: it turns out I had all the updates...). I will also convert the .mts and keep my fingers crossed that replacing the .mts with the new files is as easy as you suggest.
Still wondering a bit why Premiere would import an AE comp without sound, though... That is seriously odd in my books...
Thanks for the suggestions anyway - at least now I have something to try.

Importing a .flv into fcp

Is it possible to import an .flv into fcp? and if so, how?

You need to convert the flv to a format that can be imported into FCP. You can use with MPEG-Streamclip to convert the flv.
http://www.squared5.com/
And it's free!!!
Quicktime Pro can convert the video but not the audio.

Need to import .swf into Flash 8 project

I'm working on a project that requires me to use an already
made .swf file in it. I'm creating the whole project (which is a
presentation) strictly in Flash 8. This project requires a user to
be able to navigate through various menus and categories to see
what's in them. Most of the categories have a slide-show of images
that are accompanied by a voice over sound track that explains to
them what they're watching; however, for other categories I already
have a previously created .swf file that I need to import into
Flash 8. The issue that I've noticed when I just import the .swf
file into Flash is that the file plays at about 100x the original
speed. I think that it is because Flash looks at this file as one
frame and tried to play everything all at once. I also looked into
the possibility of trying to the loadMovie() function, but that is
not that convenient for me because this requires me to decompile
the .swf file into .fla and edit it so that a user has a way of
coming back to the main menu of the presentation from that movie,
unless there is a function parameter of loadMovie() similar to
HTML's "_blank" where a new window opens so that the user can close
this window without having to worry about restarting the
presentation. I hope that what I'm doing is clear, and I'm very
much open to any suggestions about what I should do about it or any
other ways of doing what I'm trying to achieve, which is to be able
to play already-made .swf files in my Flash project. To give more
details on these .swf files, they were originally created in Adobe
Captivate and exported into .swf. They play perfectly when you play
them, but it's just that there is an issue when I try to play them
from my Flash project. Thank you in advance for your help.

Hi Braulio
a good tutorial site can be found at
http://www.kirupa.com
and also, look in your Flash Docs, for loadClip() and
loavMovie() methods. They should get you started on some ideas to
import external content.

Imported FLV Publish Compression Settings?

I have a 5.2 meg FLV video a client has sent me. They want a
getURL script at the end of the clip so the Web browser goes to a
Web page after the clip is finished playing. To do this, I imported
the FLV into a Flash FLA document as "Embed video in SWF and play
in timeline".
When I export this, the SWF is 5.2 megs, like the imported
FLV. The JPEG Publish Settings don't affect that.
Is there a way to compress imported FLV files?
Thanks!

The FLV file is already compressed but need not be placed in
the FLV file
creating the large file size. Rather, play the FLV as an
external source.
Done this way, the compiled SWF file can be kept quite small.
See the FLVPlayback component in the ActionScript 2.0
components of the Help
files.

Import FLV Files--Perian

I keep receiving errors when I try to import flv files into iTunes. Is there any possible way to actually import these.
If no...I am curious as to how I imported one...just one!?!?! I downloaded using TubeTV. I don't know if this makes a difference, but when I downloaded a few from Safari, they would not import.
Shniba

I'm not sure, but it sounds like you're on an interesting path to discovery
Some web browsers do different things with the same download operations behind the scenes. For example, downloading .bin images (from microsoft.com/mac, for example) with OmniWeb results in .bin images being saved to the default download folder, while using Safari results in .dmg files directly useable by OS X. Perhaps the TubeTV application you mention does some similar work to change the format of Flash Video files without doing any actual video recompression.
My wildest/best guess at this point is that perhaps, since Flash Video is indeed capable of using QuickTime-compatible H.264 video and AAC audio, certain files may be inherently playable by QuickTime and other QuickTime-based applications, regardless of the presense of the .flv file extension. If this were true, it would at least partially explain why certain (but not all) Flash Video files would open with iTunes. Again, this is just wild guess, and I personally just use VLC to play these files.

Importing Video into Flash Project ?

Hi, I want to ask you about how can I import video into my Flash Project and make it possible to view ?
I tried to choose embed FLV but the sound quality is quite shity and the video quality too. Furthermore, It expands the timeline which is too long because my video is quite long too. It said that it can be at least 16000 Frames to run.
Now I choose Import -> Import Video -> Load External ..... and then I put it on one scene. The thing is that when I test it, it looks like I have to expands the timeline too so that I can play the videos fully. And It will slow down the computer so much when I want to export. Is there any way I can play the video only by just creating one keyframe ?
Please help me.

i choose Load -> External and it gives me some FLVPlayback in the library too ... But how I can make it relate to the previous scene and it can play the whole video and then back to the first scene...
First scene is where people can choose some option that I made of ...
A is where I link to the scene 3 of my project
B comes to Scene 4
C comes to Scene 5
What I'm stucking right now is how can I made the C choice for people to choose and they can see the videos. I tried to drag the FLVPlayback to the scene 6 and it shows some result. But I think if I want to watch the whole video I need to expand the timeline as much as possible and I really don't want that. Is there any actionscript code or some tips that I can make it possible? Sorry because I'm a newbie so I don't understand your words. Can you explain it more ?

Importing FLV into FLA - No sound...

Similar Messages

Maybe you are looking for