Importing from a Canon GL2 Camcorder

Question

This problem did not exist with previous versions of iMovie, but it is ubiquituous now. Here's what happens: 1) the camera is connected via Firewire and then turned on; 2) iMovie is then started, and the button is moved from the scissor icon to the camera icon; 3) and this is where the problems begin . . . and they are one of several: 1) the screen turns blue and says Camera Connected. It will then flicker to Camera Ready to Record, then back to Camera Connected, then the screen goes to black, and then it will not import. After 90 minutes with Apple support working with disconnecting peripherals, etc., a work-around was suggested . . . press play on the camera, then press Import on the screen. Tried this, and it started importing, but then the screen would turn blue and Camera Playing term would show intermittently, causing drop-puts in the replayed clips. Apple Support also suggested that it may be that iMovie cannot control the Canon GL2, but I never had this problem in previous iMovie versions. Anybody having similar issues?
G5   Mac OS X (10.4.7)  

Answer 1

Hi B
May be You find some help in my list:
Mac:
- hardware
◊ Slow hard disk (fragmented: repair permissions, repair hard disk, use a faster hard disk)
◊ Disconnect all other ext devices (FW and USB) exept Camera (and keyboard + mouse) and try again
◊ Reset PRAM
◊ Bad RAM-chips
◊ disconnect Mac from powerline (not just switch off, really plug out) for a few minutes to reset FW ports
- software
◊ File-Vault is on - turn it off
◊ Something is occupying the CPU/System, like other programs, Internet etc.
◊ Do You have desktop pictures or screen or energy-savers active? Try turning them off.
◊ Updating - OS has to be a clean install - not an update eg from X.3.x to X.4.x (no good) OS X.4.0-5 needs a clean install to work (I use X.3.9)
◊ Updating QT and/or other updates (to 7 needs v6 to be cleaned out first) QT v.7.0.0-4 needs a clean install to work (I use 6.5.2)
◊ Have you tried the crazy fix: Open GarageBand, play a few notes, close it and reopen iMovie. The camera should import fine now. Sue/SDillini
◊ Running iDVD at the same time as iMovie can cause problems: (Lennart Thelander)
◊ If You also have installed FinalCut Express/pro there are possibly problems with this
iMovie:
◊ remove bookmarks in iMovie project
◊ Trash: com.apple.iMovie.plist and com.apple.iMovie3.plist : files (Xinram)
Connection:
◊ don’t Daisy chain Camcorder <--> external hard disk <--> Mac
◊ FW-wire cable, is it OK?
◊ USB/USB2 is NO GO !
Camera:
◊ The Camera is set to VTR ? (not as when You ”film” record with it)
◊ You may be need to go to the Camera menu and select digital out.
◊ defective camera TRY IT ON ANOTHER MAC ! (if the A/D chip in the camera is harmed then it will say in iMovie that the camera is connected and You can forward rep. backward the tape but there will be no picture or sound just the blue screen).
◊ Cheque the menu on Your Camera so that it communicates with the FW digitally to Your Mac
◊ Date and Time is correct on Your Camera ?
Tape:
◊ Drop outs on the miniDV-tape - make a camera to camera copy on a tape which You have previous recorded with a time code (dummy recording).
◊ Break in the time-code on the miniDV tape (make a camera to camera copy on a tape which is pre-recorded with nothing/anything so that the tape has a time-code from beginning to the end)
◊ If You recorded in LP-mode (90 min on a standard 60 min tape with 12-bit sound). Try to change in iMovie pref. to import but not as individual clips. If this doesn’t work You have to make a Camera to Camera copy with the receiving Camera set to SP-mode and 16-bit sound.
More:
◊ follow advises here http://docs.info.apple.com/article.html?artnum=43000
◊ follow Grandmaster Dan's advice for Sony cameras here: http://www.danslagle.com/mac/iMovie/usage/5020.shtml
Yours Bengt W