Importing from a hard disk

i have various song playlists on a hard disk, numbered etc.
BUT when I import these to iTunes on another computer, the order goes completely berserk. No separation is respected, the wednesday playlist is partly copied for monday, etc. etc.
What can I do to import correctly?
Mark

Lennart usually quotes Fred Shippey on this:
If it's an AVCHD hard disc camcorder, try using Voltaic for converting to DV format. (..I haven't tried that - I don't have a hard disc camcorder - so I don't know how easy or not it is..)
For other kinds of non-tape camcorder, e.g; miniDVD, hard disc, memory chip, the usual means is to use MPEG Streamclip (..which is a free download..) and you'll also need Apple's MPEG-2 Component, which is a $19.99 download from Apple.
In both cases, convert to .dv.
Oooh, sorry Lennart; I didn't see you there!

Similar Messages

Data Recovery from crashed Hard Disk

Hi,
My HP Pavilion Laptop's internal Hard Disk (Seagate) has crashed Suddenly and it is not getting detected by system.
This hard disk contains some of my important documents which I want to recover. When I contacted a service center, I was told that it can be recovered by some expert professionals but that is a bit costly affair.
Can anyone suggest, how the data can be recovered from the hard disk.?
Thanks in advance for help.
Regards,
Rajeev

If your hard drive is spinning then using an effective data recovery software you can do recover your data yourself. I would advice you to try Kernel for Windows Data Recovery Software to recover your data from Windows file system.

How can i transfer all my data 250 GB from external hard disk to MAC pro

How can i transfer all my data 250 GB from external hard disk to MAC pro

The simple answer is just connect the external hard drive and drag the files from there to wherever you want them to go. If you need to do something more specific, you'll have to provide more details.

Should I boot from external hard disk and how do I achieve this?

I'm in a downward spiral and need advice about if booting off of an external hard disc is the right thing to do and how to go about it. How I got into this mess I'll write below. My immediate problem is that I want to be able to install a copy of osx 10.5 from the original disks that came with my computer onto a usb hard drive. Then I want to boot from that drive and install software such as disk warrior on the same external hard drive in order to repair and recover the files on my internal hard disk. Not sure if this is easy to do with the install disk that came boxed with my macbook. So is what I want to do feasible and how do I do it? Thanks.
How did I get into this mess?
For those with time to read more. A downward spiral (and my macbook was working fine)::
I have been backing up my work documents onto a 20 GB pendrive waiting to get the money to buy an nas to work with time machine for the two macbooks we have at home as a place to backup photos and video. I bought a network drive but it wouldn't work with my macbook; my time machine backup freezing at 3 gb, but works fine with wife's macbook pro.
I tried to do TM backup on a usb hard disk and got the same problem. Support forums indicated that hard disk problems could confuse TM, so although I was experiencing problem free computing I ran disk utility from internal osx. This indicated an <invalid node structure - file system verify or repair failed> at the checking catalog file stage. So I followed instructions to run disk utility and repair from the installation disk. When I ran disk utility from installation disk I get exactly the same <invalid node structure - file system verify or repair failed>. It gets worse.
After failing with install disk utility, I could not then boot from my hard disk (I had had trouble free computing up to my attempts to use TM) or eject the disk. At first attempt I had no option but to boot from dvd again as hd not offered as an option. Second attempt hd option available but fails. By reading advice given to others I managed to eject the dvd and have tried:
safe boot - it won't
boot in verbose mode and single user (indicates I have disk0s2:I/O error) and won't boot
try to use disk utility from install disk to create disk image on external hd, it won't (cites i/o error)
If I can boot from an external I will try to repair with Disk Warrior as forums indicate that this software has been able to solve <invalid node structure> issues (but am open to recommendations of other products). I also hope that I may be able to try again to burn a disk image sucessfully if this repair works. I'm still trying to save my photos and videos that aren't backed up.
I plan to try an archive and install installation but first I want to try a repair with disk warrior as I fear that archive and install won't work and I'll end up having to erase and repair my hard disk.
I feel like some perverse god is punishing me for trying to do the right thing and back up my hard disk.
Macbook 5.1 late 2008
Intel Core 2 Duo
OSX Leopard 10.5.8
85 GB of a 150GB hard disk needs backing up (saving)

I am not sure about this, but my memory is that if you try to partition the drive (in OS 10.5.8) it will erase the data.
But you can try. Go through the Add a partition steps, but watch for any warnings. If my memory is correct there will be a message to the effect that everything will be erased. If you see that, do not proceed. This page has info about how to do it, if it can be done: http://www.macworld.com/article/1164643/live_partition.html
With respect to DW on an external, I do that. I have a 80 GB external - I call it Emergency - with an OS, DW and TechTool Pro on it. (Since I have is a recovery partition built in with all new OS, Emergency would be of use only if I need to run DW or TTP.) I have never yet had to use it, but it's there. It is not usually connected - I just did that for this screen shot.

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

How do you disabled it if running the same?

My G5 iMac cannot boot up from its hard disk

My G5 iMac cannot boot up from its hard disk - I get the alternating Mac OS folder and the ? Folder which I understand means the system cannot be found.
On recommendation from a friend I tried replacing the battery - no difference.
However, I can boot up from the CD/DVD drive from the OSX installer disk, DiskWarrior, Drive Genius and Techtools Pro. But none of these utilities can see my hard disk to see if it needed repairing.
In fairness at one point DiskWarrior did see the drive and I was able to replace the directory safely. However, on subsequent reboots nothing can see the disk.
Suspecting the hard disk I bought a new one and a USB/SATA casing to mount the old drive in to see if I could get anything off of it. The good news so far is that the old drive (now mounted in the new USB casing) can be seen and read on my daughters iMac. So all my information is safe and also now backed up.
Having installed the new disk I found it also cannot be seen by any of the above utilities. I have since formatted it in the USB casing and put it back in the iMac but it still cannot be seen.
As a test I installed a new system on an old 40Gig Lacie Firewire drive attached to my iMac. This works and boots ok - sometimes.
I am now experiencing the necessity to force shutdown and restart from the startup button several times before the external disk is recognised. And most times it freezes after 30 minutes or so.
I might also add that after some force shutdowns/startup I get little or no chimes. And sometimes when trying to reset the PRAM get no second chime. On other occasions I do.
Now I am totally stuck and wondering if anyone can throw some light on why my iMac can boot up from a variety of CD/DVD utilities and sometimes an external Firewire disk but not from its own hard disk which, as I have already said, can be seen on my daughter's iMac but not by mine, so its not the disk.
Does anyone have any suggestions at all before I bite the bullet and take it in for a diagnosis and repair (depending on cost).
Thanks

Could be the logic board, in which case you would need to take it in. Since the drives are good, and the directory was repaired, the logic board is about all I can think of.

Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?

Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Deleting the old Archive Log Files from the Hard Disk

Hello All,
I want to delete the old archive files of Oracle. These files are very old and consuming very huge disk space.
Is there any way by which I can delete these files from the Hard Disk?
Can I directly delete them using the Operating System Command?
Will it cause any dilfference to the normal functioning of my Database?
If I need to delete these files, do I need to bring the database down?
Please guide me.
I need to do this activity to make some space free on the Hard Disk.
Thanks in advance.
Himanshu

Hi.
Keep archived logs from time of last backup and forward to currenct time on disk together with the backup itself. And keep older archived logs together with older warm/cold backupfiles on tape as long as there is enough capasity or following your recovery strategy. This way you might be able to roll forward a recovery without restoring these files from tape which often the faster.
Older archived logs can be deleted manually, with scheduled OS script or automatically with RMAN.
Good luck
rgds
Kjell Ove

Problems with indexing files from my hard disk

Hi everybody,
I'm a newbie to oracle and i'm trying to index files from my hard disk with oracle text. After i created a simple text file (path: 'c:\tmp\test.txt') and filled it with a short text, i executed the following lines without an error message:
grant connect, resource, ctxapp to myuser;
create table myuser.testtab(id number primary key, text BFILE);
create or replace directory test_dir as 'c:\tmp';
grant read on directory test_dir to myuser;
insert into myuser.testtab (id, text) values (1, BFILENAME('test_dir','test.txt'));
create index myuser.idx_test on myuser.testtab(text) indextype is ctxsys.context;
the record in the table testtab is stored, but the index table is empty. After i tried to get information about the bfile with java i got an SQLException with the Error-Code ORA-22285 after executing the following lines:
BFILE file = null;
try{
rset = stmt.executeQuery("select text from testtab where id = 1");
if (rset.next()) {
file = ((OracleResultSet) rset).getBFILE(1);
System.out.println("Result from fileExists: " + file.fileExists()); //This is the line where the exception is thrown
} catch (Exception e){
e.printStackTrace();
I would be obliged for any information to this problem.
Thanks in advance,
Chris J.
PS: i'm using Oracle 11.2g on Windows 7

I got your problem. Drop all the directory,table and index. Log in as "myuser" and do all the things. See the demo below. Don't use myuser.object name When executing the commands from "myuser".
SQL> conn sys@xe as sysdba
Enter password: ******
Connected.
SQL> create table hr.testtab(id number primary key, text BFILE);
Table created.
SQL> create or replace directory test_dir as 'c:\';
Directory created.
SQL> grant read on directory test_dir to hr;
Grant succeeded.
SQL> insert into hr.testtab (id, text) values (1, BFILENAME('test_dir','test.txt'));
1 row created.
SQL> ed
Wrote file afiedt.buf
1* create index hr.idx_test on hr.testtab(text) indextype is ctxsys.cont
SQL> /
Index created.
SQL> select * from ctxsys.CTX_INDEX_ERRORS;
ERR_INDEX_OWNER                ERR_INDEX_NAME                 ERR_TIMES
ERR_TEXTKEY
ERR_TEXT
HR                             IDX_TEST                       31-AUG-10
AAAEjaAABAAAKsKAAA
DRG-50857: oracle error in drstldef
ORA-22285: non-existent directory or file for FILEEXISTS operation
SQL> conn hr@xe
Enter password: **
Connected.
SQL> select * from CTX_USER_INDEX_ERRORS;
ERR_INDEX_NAME                 ERR_TIMES ERR_TEXTKEY
ERR_TEXT
IDX_TEST                       31-AUG-10 AAAEjaAABAAAKsKAAA
DRG-50857: oracle error in drstldef
ORA-22285: non-existent directory or file for FILEEXISTS operation
SQL> conn sys@xe as sysdba
Enter password: ******
Connected.
SQL> drop directory test_dir;
Directory dropped.
SQL> conn hr@xe
Enter password: **
Connected.
SQL> create or replace directory test_dir as 'c:\';
Directory created.
SQL> drop table testtab;
Table dropped.
SQL> create table testtab(id number primary key, text BFILE);
Table created.
SQL> set serverout on
SQL> DECLARE
2   v_file BFILE := BFILENAME ('TEST_DIR', 'test.txt');
3   BEGIN
4   IF DBMS_LOB.FILEEXISTS (v_file) = 1 THEN
5 DBMS_OUTPUT.PUT_LINE ('File exists.');
6   ELSIF DBMS_LOB.FILEEXISTS (v_file) = 0 THEN
7 DBMS_OUTPUT.PUT_LINE ('File does not exist');
8 ELSE
9   DBMS_OUTPUT.PUT_LINE ('Unable to test existence');
10   END IF;
11   END;
12 /
File exists.
SQL> insert into testtab values (1,BFILENAME ('TEST_DIR', 'test.txt'));
1 row created.
SQL> create index idx_test on testtab(text) indextype is ctxsys.context;
Index created.
SQL> select * from CTX_USER_INDEX_ERRORS;
no rows selected

No permission to access files from previous hard disk

I've just changed to a new hard disk and could not open files saved from old hard disk. Message given when i tried to open those files is that i do not have permission. What can be the problem and what is a possible solution?

If you do a Get Info on the volume, try the "ignore ownership on this volume" item at the bottom. You will have to authenticate by ckicking on the "padlock" before you can change the option.

Not transferring from the hard disk to the flash

Hi
this was the result that l got but the problem is that the file did not come from the hard disk into the flash memory the second time. I waited for at least 30mins and nothing happened. On top of the hyper terminal was the Transfer field which l used send and receive files sub at different times but the files do not transfer into the flash memory again. Pls could you advise me what more can l do, thanks.
rommon 1 > xmodem c2600-adventerprisek9-mz.124-9.t2.bin
Do not start the sending program yet...
         File size           Checksum   File name
     18836 bytes (0x4994)     0xd99d    bacdprompts/app-b-acd-2.1.2.2-ReadMe.txt
     24985 bytes (0x6199)     0xc81e    bacdprompts/app-b-acd-2.1.2.2.tcl
     35485 bytes (0x8a9d)     0x41de    bacdprompts/app-b-acd-aa-2.1.2.2.tcl
     75650 bytes (0x12782)    0x1ff9    bacdprompts/en_bacd_allagentsbusy.au
WARNING: All existing data in bootflash will be lost!
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: y
Ready to receive file c2600-adventerprisek9-mz.124-9.t2.bin ...

Hi
I can't start with the IOS. The point is that it is waiting for the files to be transferred which l do not understand. So what l do is to switch off the 2620XM but the result it says is that l am stopping the file from been transferred which is a real puzzle to me. Because at first the IOS is been transferred but why it is going back to the rommom mode still beats my imagination.

How I can backup from another Hard disk through my Macbook air?

How I can backup datas from another external storage disk by using My Macbook Air?

How I can backup from another hard disk through my Macbook air in Time Capsule?

Copy address book from old hard disk drive to new

I'm trying to transfer the address book from a hard disk drive (HDD) that crashed to the new HDD that has a fresh install of Leopard 10.5.8. I was able to transfer the contents of the old HDD to the new HDD, so all the files (old and new) are on the same, new HDD. I've tried was several people have suggested, which is to copy the folder "Address Book" from the location /Users/YOU/Library/Application Support/ on the old HDD to the same location on the new HDD, but only the 2 default users appear in the address book when I open it. Surely this cannot be that difficult. Any help is appreciated.
Thnaks!
UM

Hi, see if this helps...
For Address Book, quit AB...
Files...
/Users/YourUserName/Library/Preferences/com.apple.AddressBook.plist
/Users/YourUserName/Library/Preferences/com.apple.AddressBook.abd.plist
Folders...
/Users/YourUserName/Library/Application Support/AddressBook/
/Users/YourUserName/Library/Caches/com.apple.AddressBook/

HT4889 If I transfer iphoto library from a hard disk to a new iMac will all my events and albums stay unchanged?

If I transfer iphoto library from a hard disk to a new iMac will all my events and albums stay unchanged?

They should, yes. You should have a full and complete backup as well, of course.

How do I import AVCHD clips from my hard-disk?

Has anybody been able to import AVCHD clips stored in a hard-disk? I save my clips onto my hard-disk after downloading from the media card from the camera however iMovie does not seem to recognize the folder structure.
S.r.

Yes, this worked. Ideally it would be nice not to have to do that as I don't fully trust the disk image format as a final archive format and hence end up duplicating the media. I would prefer to leave it as ordinary folder structure (which works with FCP 6.0.1).
I suppose this could be a .1 release feature.
Thanks,
S.r.

Importing from a hard disk

Similar Messages

Maybe you are looking for