Importing from After Effects - Curves and Remove Grain

I did some color grading in After Effects, I applied two Color Corrections: 1) "Curves" and 2) "Remove Grain".
However when I exported to into a Premiere Pro Project and then imported it as a project into CS5.5, it said "The preset used by one or more sequences in the project  requires third party components that could not be located...."
Then it said
"Video Filter missing:  AE.ADBE CurvesCustom
Video Filter missing:  AE.VISINF Grain Removal"
Where can I get these?
PS: I have the original boxed FULL VERSION of CS5.5 Master Collection.

shooternz, I guess it's quite clear what  ectobuilder50 is talking about.
He created a composition within AE, applied some filters on footage and then exported this composition as Pr Pro project.
Then he tried to open that project in Pr Pro and got this:
ectobuilder50, I'd recommend you to use Adobe Dynamic Link instead.
Create a composition within AE and apply any filters and/or presets you like, then just save AE project.
Create a brand new or open existing Pr Pro project, then use File -> Adobe Dynamic Link -> Import After Effect Composition... if you are on Windows or smth like this if you are on Mac:

Similar Messages

  • Low quality video after import from After Effects in FCP 7, but not FCP5

    Hi everyone,
    I trying to export a video from final cut pro. This video has motion graphics I built in After Effects, as well as footage from my T2i camera. I then took it into FCP to drop in audio and edit all my elements together.
    When I exported a 30 second preview a few days ago in FCP5, the .mov file retained the quality of the export from AE and looked great - no quality lost, smooth animations, high quality video.
    However, I then upgraded to FCP7, and now the quality is lower and the video components are a bit grainy when I export using the same settings. I've tried tweaking the settings, different ways of compression, but nothing is giving me the same clean export. I've even tried changing the sequence settings and putting my footage back down.
    The only other thing that's different is I compressed my T2i footage to ProRes422 before taking it into After Effects, however even the 15 seconds of original footage I didn't compress is grainy now (and so is the original and new graphic work) so I don't think that's it. When I change the timeline sequence settings, I can get it looking good in the preview - but as soon as I render it or send it to compressor it loses quality again.
    The ONLY differently between the two exports was upgrade Final Cut, but that doesn't make any sense to me. I've even tried reopening the preview FCP file (which then asks me to update the file to FCP7) and when I do it exports grainy as well - and NOTHING else has changed in that file or the export settings since my initial export of a 30 seconds preview.
    Does anyone have any suggestions on what the issue may be? Or, what settings I can use to retain the quality when exporting?
    Thanks,
    Lauren
    Message was edited by: kiwikiwi

    Thank you so much! Although it's not exporting quite as clear as before, it's much, MUCH better now that I've corrected the timeline dominance - I'd say 95% better; and it will be re-compressed by my clients for web streaming so it doesn't need to be perfect - but the initial quality was garbage.
    I suspect when I exported my T2i footage as a ProRes file, than imported into After Effects, then back into FCP something happened along the way that messed up the quality slightly. Although the only difference in my method between FCP5 and 7 was converting to ProRes; which I only did for editing purposes as the native T2i footage needs to be rendered... which ended up being redundant as all my After Effects work needed to be rendered anyway. Ho hum.
    Do you think the ProRes conversion could account for the quality loss? It wasn't just the footage that was grainy/fuzzy, it was also the After Effects graphic work, which is why I didn't think the converstion could be the culprit. Hm. I'll have to look into this more!
    Thanks again - and so sorry for my delayed reply, I went on vacation shortly after I posted that message and only just got back to this project now
    Message was edited by: kiwikiwi

  • Importing From After Effects - Glitching Out??

    I'm importing lower thirds that I put together in After Effects CS5.5 into Premiere CS5.5.  Everything was working fine, until a few days ago.  Now all the lower thirds glitch between multiple other lower thirds surrounding it in the timeline.  Like 30% of the frames are randomly swapped out with other bits that I imported from final cut. 
    I opened After Effects, and everything appears fine.  When I play through something, then go back to premiere, it seems fixed the first time I play through it.  Then the next time it's doing the same thing. 
    I imported the project to Encore in case it was just my computer, and the actual footage was fine, but in Encore and then the DVD I burned the glitches show up.
    Need help!!
    Thanks!

    Are you Dynamically Linking your Ae comps to your Pr Seq?
    If so, render your lower thirds out of AE and replace the linked comps in Pr.  That doesn't solve your problem, but it will get your project finished.
    Fixing it may require a cache dump or deleting your previews in Pr.

  • Importing from After Effects and Adobe Premiere Pro

    This question was posted in response to the following article: http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7f47 a.html

    I don't think anybody is going to answer the question at this point... but WHAT are you supposed to do when the current version of AE informs you that it can't convert the file and you should "use an older version of AE and resave" to do it?? 1, I don't have the older version, those files were created almost a decade ago, and 2, what good would it do to "resave" it with the SAME older version??

  • HDV imported from After Effect not playing smooth

    Hi,
    I work with HDV footage from Sony V1E in FCP. For some reason, i need to do a few things in AE. I then export it there, work it out and rexport it from AE. There I use the HDV 1080/25fps quicktime compression. When I bring it back to FCp, it even shows as no need to be rendered on my TimeLine. But it doesn't play correctly at all. Like if it was to big or... i don't know... I can;t even render it since it appears as not needing it...
    What can I do? Help would be very much appreciated...
    Thx
    Federico

    If it looks good in AE then the aspect will be correct already (tends to get set incorrectly when using capture cards like decklink etc), have you tried forcing FCP to render the AE footage on the timeline (tick full in render all then press Option+R)? The HDV codec is really harsh, it could be the multi converting is introducing the error you are seeing. I tend to export using the animation codec, then re-render everything in FCP, not ideal when you have time constraints.
    One last thought, have you checked the AE output setting has field rendering enabled or not, this is independent of the timeline setting.

  • After Effects CC 2014 - removal of H.264, MPEG-2, WMV, FLV, F4V, and SWF exporters - WHY !?

    While reading the features of AfterEffects CC2014, I noticed the following:
    "removal of H.264, MPEG-2, WMV, FLV, F4V, and SWF exporters from After Effects"
    THAT IS IS REDICULOUS!!
    NO FLV !?!?
    WHAT DO YOU EXPECT USERS TO IMPORT INTO FLASH ??
    IF no FLV export is available under After Effects CC 2014, there is NO WAY to EMBED an flv into flash !! (Linking is NOT always what is wanted!!)
    NO H264 !?!?!
    HAVE YOU GONE CRAZY ?!!?!?
    YOU BREAK WORKFLOWS!!!!!!!!!!!!!!!!!
    THAT IS REDICULOUS!!!
    Any chance of restoring such features so that it makes updating to it worthwhile ?

    To date I've primarily been a Photoshop user and have dealt with years of mystifying UX and workflow changes, features that are useless to me added, and critical ones taken away (I'm looking at you Bridge, you worthless piece of garbage).  Then, to add insult to injury, Adobe forum mods telling me I'm doing it wrong and should be jumping through more hoops to achieve the same results. Now, with AE becoming a bigger part of my work, I am sad to find, that the same culture of disconnected arrogance and myopia prevails on the AE dev team.
    "Oh um user, you really want to be going through AME, because um technically speaking there have been many problems with the H.264 and MPEG-2 exporters in After Effects"
    Oh really? Tell me more about my job. Tell me about my experiences exporting these formats directly from AE. Tell me how my client views my content, is it on a Mac, or a PC? Maybe it's on his phone, or her iPad. What kind of phone is it though? Tell me at what point in my process it's ideal to render. Tell me about other tasks I'm performing. Tell me about the resolution and the bit-rate my files should play at. Tell me the final application I will be using the footage. Probably broadcast right? Or is it web? Or is it PowerPoint? Wait, what if there is no final output? What if it's just pre-vis for some other application?
    Tell me how to win over my clients; what's the correct method of presentation to engage them most impactfully? Tell me about how much time I have to render massive video files. Is it more time efficient due to the nature of my composite to render once because my file is super shallow and will render quickly or is it more efficient to render twice because my file is extremely complex with hundreds of layers?
    That the deprecated formats were hidden away in the preferences menu is dumb and annoying. That this same preference would then be removed is despicable and petty and is further confirmation that Adobe has contempt for me as a user.

  • Importing project from after effects to premiere, plug in effect not available?

    Hello all, Im using cs5. When I import a video project to premiere from after effects, i get an error message saying that an effect plugin from after effects is not available in premiere. Specifically the glow effect. I thought that since after effects had the effect that premiere would too. I'm asking for the college i go to as we are not too familiar with this program and we have a sub for the next few weeks, thanks in advanced !

    oh sorry, i didnt notice that the post i posted didnt have really any info, the page froze and the page saved my info, i guess i submitted the wrong post. anyways, this whats going on.
    I make an after effects cs5 composition which is a .MOV video i took, roughly 1 minute with the glow effect applied to the video. I then import the composition to premiere, premiere then gives me the error that premiere does not have the glow effect and therefore, won't be applied. below is my specs and here is a link to another post of mine that might possibly have something to do with this. after effects cs5 keylight (1.2) crash with dynamic link error?
    Model Name: iMac
      Model Identifier: iMac13,2
      Processor Name: Intel Core i5
      Processor Speed: 3.2 GHz
      Number of Processors: 1
      Total Number of Cores: 4
      L2 Cache (per Core): 256 KB
      L3 Cache: 6 MB
      Memory: 8 GB
      Boot ROM Version: IM131.010A.B05
      SMC Version (system): 2.11f14
    Mac (27-inch, Late 2012)
    Processor: 3.2 Ghz Intel Core i5
    Memory: 8GB 1600 MHz DDR3
    Graphics: NVIDIA GeForce GTX 680MX 2048 MB
    OS X YOSEMITE version 10.10.1
    after effects cs5
    Verison 10.0.0.458
    2% used of 8.0 GB
    378 Plugins

  • How to Create and export motion data from After effects CC to Flash CC

    Hi there ,
    Basically what I've got here is as follows.
    I have a small character animation (about 100x100 px) - that is running inside a screen of 1280x720 px.
    I want to hold the caracter in one position (so that I can get ridd off the useless alpha. i guess i will do that manually by keyframing)
    and also to give a motion data to be used in Flash CC - to assemble the original animation.
    Can anybody help me out with this?

    Yeah, that's one of the reasons that we removed it: no one was using it. And it was terrible.
    Here's more information:
    http://forums.adobe.com/message/5555577
    Of course, if you _do_ want this feature, it's relatively easy to save the project back to After Effects CS6 and then use After Effects CS6 to create an XFL file. Keep in mind that all Creative Cloud subscribers have access to CS6 versions, too.

  • Video tutorials for After Effects CS4 (and some still relevant from CS3)

    I just added a post to my blog about some new video tutorials that we posted (and some old ones that are still relevant):
    video tutorials for After Effects CS4 (and some still relevant from CS3)

    Thanks Todd!

  • Exporting Motion Graphics and animation from After Effects CS5

    I find that exporting from After Effects is problematic when using a ramp or working with anything that has a gradient of some kind. Always banding and artifacts.
    Any insight into how to achieve good result with projects such as this?
    Thx in advance.

    I find that exporting from After Effects is problematic when using a ramp or working with anything that has a gradient of some kind.
    ...then don't! Sorry, but this is the same old thing: Simple computational math dictates that between points A and B only so many discrete color levels can exist in 8bit color and that any distance beyond 1024 pixels will result in duplicate pixels of the same colors to be adjacent, commonly referred to as banding. Or in other words: You are looking to fix a thing that can't really be fixed, even more so when compression reduces the available color range further. Yes, you can use all sorts of tricks like adding noise or adjusting gamma to minimize this, but it will never go away. The ugly harsh truth is, that it all starts with a flawed design approach and any of that is merely trying to fix things at the wrong and. As I said in my initial sentence, don't use gradients that cover such large distances along just one axis or uniformely colored areas. Ad structure by adding more gradients perpendicular/ at an angle to the main gradient, use subtle color variations, add vignetting or generally use "busy" designs that have more elements or textures that would allow to forego large uniform areas....
    Mylenium

  • What is the best video format for importing into After Effects CS5

    Please look at this video, work in progress.
    http://www.youtube.com/watch?v=49_wbdKALQk
    The opening, featuring a ribbon of videos, was created in After Effects, using Digieffects Freeform.
    The  issue is the poor quality of the videos that are featured in the  opening -- compared to the higher quality of videos from the original Premiere  project., which you can see at the end of the clip.
    To create the After Effects project, I exported a series of video clips from Premiere  to mp4.
    Then I imported them into AfterEffects.
    The bottom line, and the purpose of this question, is I am thinking that  MP4 was not the best choice for the Adobe Premiere export.
    What  is the best format to export video from in Premiere Pro CS5 to import  into after effects, or to import into any other editing program,  incuding importing right back into Adobe Premiere, if that is eever  needed.
    AVI?
    MOV
    MP4
    And any other settings that will result with the highest qualiity videos for importing.
    Thanks

    To follow on with Wade's suggestion...
    There are lots of ways to get movies and projects and other things back and forth between After Effects and Premiere Pro. This page outlines them:
    "Working with Premiere Pro and After Effects"
    If you must render and export a movie out of one application to bring it into another, there is a very basic piece of video workflow advice that you need to keep in mind (which applies to _all_ video software, not just After Effects and Premiere Pro):
    If you're creating a movie to be used in the next step of a post-production pipeline, you _never_ want to use a format that does lossy compression. You either use no compression or (preferable) lossless compression. Examples of codecs that provide lossless compression are the Animation codec and PNG codec at the highest quality settings; these can be used in a QuickTime container, for example. Never compress a movie with lossy compression except at the very end of your pipeline, when you're creating the final movie for distribution.
    MP4 (MPEG-4) is a lossy codec. The quality loss is acceptable for the last stage in the pipeline, but it's not acceptable for an intermediate file.
    It seems that you would benefit from reading this and and working your way through this.

  • Best export format for importing into After Effects or even back into Premiere

    Please look at this video, work in progress.
    http://www.youtube.com/watch?v=49_wbdKALQk
    The opening, featuring a ribbon of videos, was created in After Effects, using Digieffects Freeform.
    The  issue is the poor quality of the videos that are featured in the  opening -- compared to the high quality of videos from the original Premiere  project., which you can see at the end of the clip.
    To create the After Effects project, I exported a series of video clips from Premiere  to mp4.
    Then I imported them into AfterEffects.
    The bottom line, and the purpose of this question, is I am thinking that  MP4 was not the best choice for the Adobe Premiere export.
    What  is the best format to export video from in Premiere Pro CS5 to import  into after effects, or to import into any other editing program,  incuding importing right back into Adobe Premiere, if that is eever  needed.
    AVI?
    MOV
    MP4
    And any other settings that will result with the highest qualiity videos for importing.
    Thanks

    Okay, here's where I stand at this point regarding exporting and/or dynamic linking between AfterEffects and Premiere.
    I'm in After Effects.  I create a composition I like.  So I first tried the old fashioned way. I exported it into a MOV file with the animation preset. Millions of colors.  Same frame rate as my Premiere project, which also uses MOV files with no problem.
    Howver when I import the MOV file created by After effects, the NEW MOV file section of the premier project plays sluggish.  And it also causes the videos that follow to play sluggish.   And they are all MOV files at the same frame rate.
    The same thing happens when I do a dynamic link between the two projects.  A sluggish response starting with the After Effects dynamic link and affecting the MOV video files that follow.
    It's a very short After Effects composition.  About 3 second slong.
    I have a very powerful computer built especially for CS5 and premiere --so that should not be an issue -- recently was in the top ten of the benchmark list.
    Up to this point my video files have played perfectly layer upon layer with no problems.
    Is there something I am not considering?
    Thanks.
    Rowby

  • Exporting layers of audio from After Effects  cs6 to Premiere / or Audition? Is this possible?

    exporting layers of audio from After Effects  cs6 to Premiere / or Audition? Is this possible?
    Help - I have an After effects project with multiple layered files and want to copy these to Premiere / Audition. For example I know if you select multiple video files from After Effects these can be pasted straight into Premiere intact - but this does not work with audio. I want to take existing layered audio files from After Effects to Audition / or Premiere but can't copy and paste - is there a simple solution for this?

    Hi thanks Dave for responding - yes that could work as a 'workaround' -  I was hoping there would be a way I can keep the existing independent audio layers and corresponding audio levels from After Effects- in the same way I can copy and paste video files from After Effects to Premiere - rather than exporting a flattened AIFF /WAV from After Effects.
    This would then allow me a lot more control working on the final edit - especially as currently a lot of the audio layers overlap. It does seem there is no simple solution for this, so  otherwise I can do what you suggest - and 'stagger all the audio files' in sequence so they do not overlap on the timeline and then when I import the flattened exported AIFF file into Audition/ Premeire / I then can cut it up again and recreate the overlaps. Was hoping there might be a simple copy + paste method or other 'export method' but I guess this is simply not possible. It would save me about 7 hours of work, but not the end of the world I guess
    One final point - some of the audio clips are .mp3s but the majority are WAVS, hopefully this should not create any issues on the export.
    thanks again for your help, if you or anyone has any other solution pls let me know
    Best
    Alex

  • Sound problem with exporting from After Effects

    Hello everybody,
    I exported a windows media video from premiere cs5 (it was shot with the cannon 7d).
    The video has 1 video channel, 1 audio channel that contains a conversation, and another audio channel that contains only music.
    After I exported it, I imported the video into After Effects cs5, I added some effects, and then I exported it as a windows media video.
    The audio settings were:
    Mode- music
    codec- windows meida audio voice 9
    audio format- 20kbps, 22.05 khz, mono
    Even though the video from Premiere was flawless, the one from After Effects contains the conversation perfectly, but the music is very low and even erratic.
    Did anybody experienced this problem?

    AE doesn't deal with multiple channels. It always assumes that a file with 2 channels is stereo. You need to export the audio from Premiere separately or create a proper stereo mix, not throw two interleaved mono channels at AE...
    Mylenium

  • Problems with importing to After Effects

    Hi,
    I can't get my Motion projects imported into After Effects. I have read the manual and done exactly as instructed. When i try to import my Motion project file into AE, I get an error message in AE saying: "files of type "mofo" are not supported. I have no idea where the "mofo" comes from, since the projects are .motn format.
    I was wondering if anybody else has same kind of problems, with Motion and AE?
    The Motion version I am using is 3.0.2 and After Effects is the CS3 version.

    Yes this is a known problem and has been discussed a few times on this forum. It only started being the case with CS3 unfortunately. The only work around is to rename the Motion Project with a .mov on the end of the name, and import to After Effects. This works but means that the very handy feature of 'edit original' stops working, and i've also noticed a number of instabilities (crashes etc) introduced as a result.
    We have to hope they'll (apple and adobe) fix this in a future update.

Maybe you are looking for