Importing from BO XI R2 to 3.1 problems with Favorites and User Memberships

I am having a problem when using the Import Wizard to import users and groups. I marked it to import favorite folders for selected users and all groups and users. Well, the user favorites folder keeps failing with "The owner of this Favorite Folder was not found" and the groups are not associating the users in the new system under the same alias with the groups.
Old system I am using AD NTLM. New system I am using AD Kerberos.

Tim,
Thanks for the info. However, I think I need to be clearer.
The AD plugin has been configured on the destination system with no groups mapped. It has AD enabled and updated so the initial batch of users were imported in without any further manipulation.
When migrating the users and groups from the source system, all of the groups seem to have migrated over fine. However, all of the users from the source that has AD did not migrate over to the destination system because it says there is a duplicate. That is why the groups did not map these users and the favorites did not go through.. please let me know if this is not clear.
I do not want to change all of the system users to Enterprise and then transfer them over as enterprise and then configure them as AD users... this may end up causing more problems and may not even work

Similar Messages

When i import from my vidio camera into imovie the clips look tall and thin.tied different imports like full size or large but seem to make no difference everything seems to run ok including sound whats going on? the m

when i import from my video camera into imovie the clips look tall and thin. tried different imports like full size or large have imported both sd and hd but seem to make no difference everything seems to run ok including sound. whats going on?

Hi Brad,
when you use Streamclip to convert media, use the same name for the exported file (only with different extension). Then make a shell script calling
touch -r origFileName.mp2 newFileName.mov
This will copy the exact time and date from origFileName.mp2 to newFileName.mov
The script may look like this (save the file, give an exec permission to it and call it in the right directory):
#!/bin/bash
for i in `ls *.mp2`; do
NEWNAME=$(ls "$i" | sed -e 's/mp2/mov/')
touch -r $i $NEWNAME
done
You may need to adapt the extension names used (in the example above .mp2 is input file to get the date/time stamp from and .mov is the output file to stamp.
Have fun and cheers

Just moved my email from entourage to Mail. Having real problems with getting my signatures to work properly. When adding in a small company logo, windows computers only receive signature as an attachment. Am sending email as Rich Text. Any ideas on a fix

Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.

Send it as html so the signature is an image source URL

Problem with exporting and printing from pages to PDF

I have a problem with my Pages
My font will not be embeded in my pdf files.
I have saved as a ps file and in to the destiller and my fonts are missing.
I need to send my file to the print shop but they will not accept my file and i now understand why.
fonts are missing...
Is there a workaround.
I have no problem in Indesign or quark but pages.....
I need help
thanks a zillion

The font is coming from a notation software Sibelius 4 and is namned opus
Hmmm ... Sibelius is a music notation software and notations are marked up in MusicXML. Presumably the font file is an SFNT with TrueType splines, but it is probably not installed in OS X system folders - rather in an internal Sibelius application font folder. So presumably you do not see the font in FontBook and OS X font auditing does not apply to the font.
Sibelius exports EPS files, right? If memory serves, an EPS is still legal even if the font resource is not embedded. And in any case, we know from the behaviour that the font resource is not embedded for some reason. So how do you get Sibelius to put the font resource inside the graphic ... normally there is a button in the EPS export procedure that gives you the option to Embed All Fonts.
You do not seem to get this button, though. Or why else would you not have checked it already and the problem would have gone away already.
The next point in troubleshooting this is that you are not following the path that would let OS X detect that an external font resource is not embedded.
I go from pages-print-printer- acrobat Pro 8-save as Pdf-x
What you are doing here is telling Pages to tell OS X to generate a PostScript program within which is nested your Encapsulated PostScript program with the call to an unresolved external font resource.
So why does Acrobat Pro not detect the unresolved external font resource? Hmm ... did you try the Preflight option in Acrobat 8 Pro? It should provide information on unresolved embeddings.
I have also tried pages-print-printer- acrobat Pro 8 and save pdf as postscript and put the postscript file in destiller 8 pro with defalt setting high quality print
The whole problem with EPS and PS is that this sort of situation is possible in the first place (plus, what is worse, the PS program can include custom additions to the graphics model that then fail in the PS interpreter whence Apple GX normalizing, Adobe Distiller normalizing, and Apple Quartz normalizing). You want to get as far away from EPS and PS as possible, believe me.
So, you have not done what I posted that you should do in the first place. If I were you, I would first get rid of the problem that the EPS is making a call to an external font and then get rid of the problem that the PostScript is preserving the external call.
To get rid of the problem that the EPS is preserving an external call, simply open the EPS in Apple Preview which includes a NORMALIZER for EPS/PS, and then save out the graphic as PDF. Alternatively, if you don't trust Quartz for some reason, set up a hotfolder for Distiller, make sure the option to embed all fonts is enabled, and convert the EPS to PDF.
Now replace your EPS in Pages with PDF in Pages, and don't save PostScript to disk but save PDF to disk through the proper procedure which is File > Print > PDF > Save as PDF/X [for your custom configuration of the PDF/X-3 filter considering that no sane person in North Europe prints lowend US SWOP, we use ISO].
If you begin by telling OS X that you want PDF within which fonts are supposed to be embedded ALWAYS, then you have started the right way. Otherwise, you have not told the operating system what you want to do, and this then leads you into places where you are unlikely to have the expertise to troubleshoot problems.
So, forget placing EPS in the first place, place PDF. And forget saving PostScript to disk, save PDF to disk. If that does not sort your problem, here is the dirty solution for professional prepress.
Adobe Photoshop has an EPS rasterizer that has wide tolerances for poor PostScript programming (so does Adobe Illustrator 6 and higher by the way).
Therefore, if an EPS is posing problems, one workaround is to rasterize the EPS at high resolution in Photoshop and place that high resolution PDF in your layout.
Take care that you rasterize as 1 bit at the required resolution of the print provider, probably 2450 dpi. When you save the 1 bit as PDF, Photoshop automatically compresses to a very, very small file (don't be surprised if 15Mb compresses to something like 0.5Mb).
Rasterizing in Photoshop should not be necessary if you simply start by telling the operating system what it is you are trying to do. Then the operating system should be able to take the right decisions for you, and tell if you if finds problems it cannot resolve without turning to you.
Good luck,
Henrik
would-be technical writer

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...????

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...???? In the box with the disk came the product key, have put it in and it doesnt work. Please help..x

unfortunately - you can not. you can't even buy outlook by itself at microsoft's own website.
does it have to be outlook? maybe you can get away with using something else that's outlook compatible.
how about trying Thunderbird for Mac OS?
or maybe you can call apple and let them know you purchase the wrong version - they might give you a break and just pay the difference for the home and business version.
good luck

I hve pop up from adobe that tell me they have problem with my paiement and billing information and to go in my account or my lisence will stop working in 25 days

I have pop up from adobe that tell me they have problem with my paiement and billing information and to go in my account or my lisence will stop working in 25 days again... I can't find anything wrong in my account infos. What do I need to check and change? Adobe takes the money directly on my credit card since almost 2 years and I haven't change anything sicne then. The expiration date is good. Also, I'm not able to contact the Adobe support, it's not available.

ImprimerieModerne, my response of about being unable to find the CC was for Kathy P. The issue that you are facing is being worked upon.
I am sorry for the confusion.
Regards
Rajshree

I have a iphone 5, purchased dec 2013. Had no problems with downloads and syncing until yesterday. I updated to the latest 7.1.1 and now my purchased ringtones have bern deleted from ....Try providing more room for peoples questions ...

I have a iphone 5, purchased dec 2013. Had no problems with downloads and syncing until yesterday. I updated to the latest 7.1.1 and now my purchased ringtones have bern deleted from my library and my phone, Where are they ????
I have gone to download again and told i can purchase them again
But there is no option to download all ready purchased items..
Can you provide an explanation and solution .

Are you using the same Apple id as used to originally purchase them
and are you using iTunes on a PC/Mac

I have lost my photos/videos when i imported from my ipad 2 to my new imac latest version and it's not reading the files. I have downloaded iMac library manager and can see them. can someone shed some light please ?

i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
and it's not reading the files. I have downloaded iMac library manager and can see them. when i go back into iphoto i'm getting the following message :
Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
I don't know what to do - please help !!!!
can someone shed some light please ?

So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Problem with BTE and FI-parking- no data from memory ID to ABAP

Hi Experts,
I have a scenario in Business Workflow where I want to catch the data(BKPF & BSEG) after SAP transaction processing - event is to change parked FI-document with FBV2. I´m trying to use BTE to receive the data after processing transaction.
All BTE steps seems to be activated - because I can debug my functions when processing FBV2 - but I cannot reach any data into my coding after processing.
I have created my project in BF24:
ZXXX Testing: WF-memory ID
I have also linked few FI-events to my BTE interface funtion in BF34:
00001130 ZXXX ZXXX_FIPP_CHANGE_BTE
00002213 ZXXX ZXXX_FIPP_CHANGE_BTE
00002217 ZXXX ZXXX_FIPP_CHANGE_BTE
My BTE function ZXXX_FIPP_CHANGE_BTE is as following:
DATA: memid(15) VALUE 'ZXXX_2217'.
*Initialize
CLEAR: t_vbkpf,
t_vbsegs.
FREE MEMORY ID 'ZXXX_2217'.
*Backtracking of BTE
EXPORT t_vbkpf
t_vbsegs
TO MEMORY ID memid.
ENDFUNCTION.
I have also created funtion to call FBV2:
data: memid(15) value 'ZXXX_2217'.
CALL TRANSACTION 'FBV2'.
*Import memory of BTE
IMPORT t_vbkpf
t_vbsegs
FROM MEMORY ID memid.
*Free memory id
FREE MEMORY ID memid.
When I set a breakpoint to both of the functions and I execute FBV2 I reach the breakpoints. Problem is that the data is not passed from memid 'ZXXX_2217' into function after FBV2(this syntax: IMPORT t_vbkpf t_vbsegs FROM MEMORY ID memid.)
What could be missing. So both functions are called but NO DATA is passed from memory ID to my internal tables? This seems to be a problem with memory ID´s. Also in my BTE function ZXXX_FIPP_CHANGE_BTE I receive a sy-subrc value 4 when executing syntax "FREE MEMORY ID 'ZXXX_2217'. ".
All hints appreciated,
Jani

Hi Ramki,
I must be frustrating You with these stupid questions... You have already supported me hugely to get more famailiar with BTE. For example not to commit in BTE etc. Big thanks for that!
In all cases when I have tested my project in BF24 has been always active; and yes I have changed the pre. posted document always to trigger the BTE.
I still have a problem. I copied all customizing and coding into other system - with same dissapointing results. Let me describe this once more:
My entry in BF24:
Product: ZBE
Text: Jani testing
RFC destination:
Active: X
My entry in BF34:
Event: 00002214
Product: ZBE
Ctr:
Appl:
Function module: ZBE_BTE
My BTE function:
 DATA: memid(15) VALUE 'ZBE_BTE2214'.
DATA: t_vbkpf LIKE fvbkpf OCCURS 0 WITH HEADER LINE.
FREE MEMORY ID memid.
EXPORT t_vbkpf TO MEMORY ID memid.
And the function ZBE_BTE_EXECUTE where I call FBV2:
 DATA: memid(15) VALUE 'ZBE_BTE2214'.
DATA: t_vbkpf LIKE fvbkpf OCCURS 0 WITH HEADER LINE.
CALL TRANSACTION 'FBV2'.
IMPORT t_vbkpf FROM MEMORY ID memid.
FREE MEMORY ID memid.
When I process my function ZBE_BTE_EXECUTE - and I have added a breakpoint into ZBE_BTE - for FBV2 call it does not reach the breakpoint in ZBE_BTE at all! This occurs when using event linkage 00002214! And I do execute a real change to parked document.
But if I change the entry in BF34 to be linked for event 00002217 or 00002218 process reaches my breakpoint in BTE function ZBE_BTE! But in these cases also, it does not import the data after transaction call in function ZBE_BTE_EXECUTE. When I continue debugging the coding in BTE function ZBE_BTE further into SAP-coding, I can see that my internal table t_vbkpf is filled. But when I leave SAP-coding when FBV2 is completed and return to ZBE_BTE_EXECUTE - where t_vbkpf should be filled from memory id - t_vbkpf is empty!
Again as a conclusion in this system:
For BTE event 00002214 this locig does not work at all. For events 00002217 and 00002218 it does get activated, but does not bring any data from memory ID into my abap. Strangest this is that I use absolutely same kind of coding that You.
Can You see if I have to fill those empty fields( Ctr. & Appl.) in my BF34 customizing? Or is some other customizing action missing?
Br,
Jani

I am trying to download my photos into I photo with my new Nikon S6300 camera and keep getting the message The file could not be imported the file is unrecognizable format had no problems with my Canon camera

Trying to download my pictures to IPhoto with my new Nikon S6300 camera keep getting the message the file could not be imported as the file is unreconizable format. I had no problem with my old Canon camera. Please help

I am having the same problem which has happened very infrequently before. Generally it's one photo and happened when my battery died.
However today I tried to download six photos.
None would download including several others for a total of 21 that would not download.
Since I had just installed a new powered hub and added three new external 4T hard drives, I got concerned that it was the hub. Then got really worried that I'd have problems with the data I have been backing up.
However following this sequence of events, I've determined it's not the hub, but still don't know what is causing the problem.
(1) Put a fresh battery in the camera - same results
(1.5) Used a different port in the new hub - same results
(2) Put the card in the card slot in the back of my iMac - no problems except that one image I knew about last week. The six new images imported.
(3) Tried again using the cable - still same error
(4) Changed cables - my husband has the same camera - still same error
(4) Put the card in his camera with his cable - still same error
(5) Put the card in a card reader and used the same slot in the new hub - no problems - same one wouldn't import but message that there are no new photos to import.
(6) Moved the offending one image to the Trash while the card was in the card reader
(7) Put the card back into my camera and used my cable. iPhoto had no error and displayed the message there are no new photos.
Conclusion:
Not the camera
Not the cable
Not the hub
Must remove bad photo from the card
However, I have not had to do that before. I went through several imports on vacation when there was one bad image and just ignored it each time.
Any idea why this is happening now?
Thank you

Encore CS3 - Hangs and import problems with menus and avi footage with audio tracks present.

I'm trying to import some footage files in .avi format into Encore CS3 and am having several problems.
In what follows when I say "crash" I mean Encore quits with a standard Windows error. When I say "hang" I mean Encore does not quit but rather becomes an unresponsive process that must be killed manually using Windows Task Manager.
My System:
WinXP Pro SP2
2.93 GHz Intel Celeron CPU - single core
Intel PERL mobo
3GB 400MHz RAM
NVidia 7800GS video
I mention these specs however I am not experiencing any hardware
related bugs or issues (like out of memory or video driver crashes
etc) when using any CS3 app.
The footage files (as reported by GSpot) and problems I am seeing. In all cases GSpot reports that I have the appropriate codec installed:
footage1.avi - Dx50 XVid 1.0.3, Dolby AC3 48kHz 192kb/s, 716834 KB
Attempting to import as timeline causes Encore CS3 to hang.
Importing as an Asset allows it to import but when I try to click
on it in the project windown to add it to a new empty timeline,
Encore hangs. It plays fine in Windows Media Player.
footage2.avi - Dx50 XVid 1.0.3, MPEG-1 Layer 3 48kHz 128kb/s, 718302 KB
Imports fine as either a timeline or asset but no audio track comes
with it, even though there is an audio track in the footage. It plays
fine in Windows Media Player. Video imports perfectly, just no audio.
footage3.avi - Dx50 XVid 1.0.3, MPEG1-Layer3 48kHz 112kb/s, 717606 KB
Imports fine as either a timeline or asset but no audio track comes
with it, even though there is an audio track in the footage. It plays
fine in Windows Media Player. Video imports perfectly, just no
audio. I tried converting this one using AVS to both MPEG3 and DivX,
each using MPEG1-Layer3 44kHz 192kb/s audio, and got the same issue
upon importing into Encore CS3. I also loaded it into Camtasia
Studio and it looked fine over there. The audio was present and I
was able to export it as a .WAV file. When I tried looking at the
file in Soundbooth CS3, there was no audio track or, more
accurately, the audio track was a flat line.
By way of comparison these are importing perfectly:
footage4.avi - XVID XviD 1.1.0 Beta2, MPEG1-Layer3 48kHz 189kb/s Two mono
channels LAME3.96r, 717436 KB.
footage5.avi - XVID XviD 1.1.0 Final, Dolby AC3 48kHz 448kb/s Six
channels (3/2 .1), 716418 KB.
footage6.avi - XVID XviD 1.1.0 Final, Dolby AC3 48kHz 448kb/s Six
channels (3/2 .1), 716418 KB.
footage7.avi - XVID XviD 1.0.3, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 717502 KB
footage8.avi - XVID XviD 1.0.3, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 717180 KB
footage9.avi - XVID XviD 1.1.2 Final, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 2291904 KB
Although this one imported & transcoded correctly, when I went to
build it to a DVD image file I got some strange errors during the
"planning video" stage that prevented the process from completing.
Unfortunately I neglected to write down the error message I recieved
which read like quite nonsensical babble to me, and I have since
deleted the project folder. I remember it was not a memory or
display related error and it included a timestamp where the error
was happening. I played the footage in the preview panel thru the
identified timestamp but it previewed perfectly without even a
jitter in either the video or audio. Took forever to transcode so I
doubt I'll be doing this one again anytime soon.
Another issue I am having is with the motion menus. I burned a DVD and it does not load correctly in one of my DVD players (a Sony rdr-gx330 recorder/player). It appears to take extra time to recognize the disk, the startup (first-play) menu does not show automatically, and I must press the Main Menu button on the

Another issue I am having is with the motion menus. I burned a DVD and it does not load correctly in one of my DVD players (a Sony rdr-gx330 recorder/player). It appears to take extra time to recognize the disk, the startup (first-play) menu does not show automatically, and I must press the Main Menu button on the remote control to make it appear. Other than that it seems to play ok in that player. Also tested it in 2 other DVD players (a Panasonic and Zenith) and it worked just fine like it's supposed to in them. Also plays perfectly in my computer's DVD player/burner using Windows Media Player v10. I tried burning to Memorex +RW single-layer single-sided disks at 6, 7, & 8Mbps project settings but got the exact same result every time.
Encore CS3 crashes fairly often during authoring, particularly during imports, and when I go to edit things like calling up a timeline in the timeline panel, dragging footage into an existing timeline, or changing button links in a menu etc.. I have also experienced seemingly random hangs even more often, probably 5 or 6 times as often as a crash. Saving the project after every little change I make, then closing and restarting Encore allows me to make progress albeit at a significantly reduced workflow rate. Accessing Photoshop from Encore appears to be working flawlessly so far aside from the slow load times. Encore hangs sometimes during video transcoding, repeat the process and it works ok. If I try to import a menu from the library after importing my footage files, Encore hangs trying to import it either at the 50% mark or the 99% mark (it varies even with the same exact menu selected from the library). If I import the menu first and the footage after, then no problems. Also trying to render motion menus after importing footage causes Encore to hang, render before footage import and everything works ok. Interestingly enough, previewing my project in Encore's monitor or preview panels works perfectly even in High quality mode -- in fact it operates quite smoothly in comparison to other apps I have tried. Although those footage files that had missing audio tracks on import obviously played silently, I have yet to experience a hang or crash during a preview or when scrubbing through a timeline in the monitor panel.
The last problem I've seen is with the project cache files. It doesn't always get rid of cache files when stuff is deleted from the project. I was working on one project and surprisingly ran out of disk space. When I tracked it down I found that there were some two dozen copies of a footage file I had repeatedly imported and deleted from the project still sitting in the cache folder. The file was an avi about 2GB so it was taking up some 40 GB of disk space for stuff that was no longer in the project. I tried shutting down Encore and manually deleting all the cache files, and that worked for most of them, but there was one 2GB file that kept reappearing in the cache folder even though it was no longer in the project. The XML file in the cache folder still had references to it in there so I can only assume that was the reason it kept showing up. I eventually had to delete and totally recreate the project from scratch to regain my lost disk space. This included having to sit thru a 6 hour long transcoding session which pissed me off to no end.
Encore CS3 appears on the surface to be a very powerful, feature rich, and approachable app with a simple easy to use interface, but it is awfully bugged in just about every area I have explored and still needs lots and lots of work for it to be really useful. Frankly for me it is pretty damn annoying that I have invested so much money in this suite only to find several of the apps in it (Encore & Premiere in particular) behaving this poorly. In my opinion every single app in the suite exhibits lousy performance whenever you must do anything at all involving the disk from the time you click to start it up until the time you click to close it down. Several of them are just as seriously bugged as Encore too, and being a long time Photoshop v5.5 user I expected much more from Adobe. Even Photoshop is two or three times as slow now (e.g. it takes about 20-30 seconds to simply create an empty 500x500 pixel image file and almost a full minute to load a 30x60 pixel single-layer gif). So far I have attempted to create 6 DVDs using Encore and after 3 weeks of effort have only succeeded in getting one of them onto a final disk -- and that one is kinda limping to work correctly in my DVD player. Three of those projects became so corrupted while working on them that I had to delete them completely and recreate them from scratch, only to find that I still couldn't get them to completion for one reason or another. Seriously disappointing.

Font problem with Montserrat and Maven Pro from google

Seems like some fonts don't render as they should in Firefox 29.0.1. I tried to use google web fonts like Montserrat and Maven Pro, no problem with downloading but this fonts don't look good.
I tried to install Montserrat to my Windows 7 (64) and deactivated css so that FF runs the font but same problem occurs.
A really strange problem is that from my computer at work this fonts don't work from FF or Chrome, all versions of IE is fine.
At home i have a laptop with same OS and version of FF and from home it works! But not Chrome..
I have search on the net and at your support site but haven't find any answers yet.
You can look at http://arenago.axiell.com for your self. Below is troubleshooting information from my version of FF where this problems occurs (Sorry about the Swedish)
Programfakta
Namn: Firefox
Version: 29.0.1
Användaragent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:29.0) Gecko/20100101 Firefox/29.0
Kraschrapporter för de senaste 3 dagarna
Alla kraschrapporter
Tillägg
Namn: Classic Theme Restorer
Version: 1.1.8
Aktiverad: true
ID: ClassicThemeRestorer@ArisT2Noia4dev
Namn: Firebug
Version: 1.12.8
Aktiverad: true
ID: [email protected]
Namn: HostAdmin
Version: 1.4.9.2
Aktiverad: true
ID: {bd54afa8-b14a-4d7a-aecf-37e34e882796}
Namn: Web Developer
Version: 1.2.5
Aktiverad: true
ID: {c45c406e-ab73-11d8-be73-000a95be3b12}
Viktiga ändrade inställningar
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.places.smartBookmarksVersion: 6
browser.sessionstore.upgradeBackup.latestBuildID: 20140506152807
browser.startup.homepage: about:blank
browser.startup.homepage_override.buildID: 20140506152807
browser.startup.homepage_override.mstone: 29.0.1
browser.tabs.drawInTitlebar: false
browser.tabs.onTop: false
dom.mozApps.used: true
extensions.lastAppVersion: 29.0.1
font.default.x-western: sans-serif
font.internaluseonly.changed: true
font.name.sans-serif.x-western: Montserrat
font.name.serif.x-western: Montserrat
network.cookie.prefsMigrated: true
network.dnsCacheEntries: 0
network.dnsCacheExpiration: 0
places.database.lastMaintenance: 1400218745
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_bgcolor: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_bgimages: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_colorspace:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_command:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_downloadfonts: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_duplex: -983728976
print.printer_\\tina\Kajan_HP_LJ_P2055.print_edge_bottom: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_edge_left: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_edge_right: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_edge_top: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_evenpages: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_footercenter:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_footerleft: &PT
print.printer_\\tina\Kajan_HP_LJ_P2055.print_footerright: &D
print.printer_\\tina\Kajan_HP_LJ_P2055.print_headercenter:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_headerleft: &T
print.printer_\\tina\Kajan_HP_LJ_P2055.print_headerright: &U
print.printer_\\tina\Kajan_HP_LJ_P2055.print_in_color: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_margin_bottom: 0.5
print.printer_\\tina\Kajan_HP_LJ_P2055.print_margin_left: 0.5
print.printer_\\tina\Kajan_HP_LJ_P2055.print_margin_right: 0.5
print.printer_\\tina\Kajan_HP_LJ_P2055.print_margin_top: 0.5
print.printer_\\tina\Kajan_HP_LJ_P2055.print_oddpages: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_orientation: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_page_delay: 50
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_data: 9
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_height: 11,00
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_name:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_size_type: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_size_unit: 1
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_width: 8,50
print.printer_\\tina\Kajan_HP_LJ_P2055.print_plex_name:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_resolution: 1
print.printer_\\tina\Kajan_HP_LJ_P2055.print_resolution_name:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_reversed: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_scaling: 1,00
print.printer_\\tina\Kajan_HP_LJ_P2055.print_shrink_to_fit: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_to_file: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_unwriteable_margin_bottom: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_unwriteable_margin_left: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_unwriteable_margin_right: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_unwriteable_margin_top: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_bgcolor: false
print.printer_\\tina\NRG_MP_C3501_PS.print_bgimages: false
print.printer_\\tina\NRG_MP_C3501_PS.print_colorspace:
print.printer_\\tina\NRG_MP_C3501_PS.print_command:
print.printer_\\tina\NRG_MP_C3501_PS.print_downloadfonts: false
print.printer_\\tina\NRG_MP_C3501_PS.print_duplex: -983728976
print.printer_\\tina\NRG_MP_C3501_PS.print_edge_bottom: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_edge_left: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_edge_right: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_edge_top: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_evenpages: true
print.printer_\\tina\NRG_MP_C3501_PS.print_footercenter:
print.printer_\\tina\NRG_MP_C3501_PS.print_footerleft: &PT
print.printer_\\tina\NRG_MP_C3501_PS.print_footerright: &D
print.printer_\\tina\NRG_MP_C3501_PS.print_headercenter:
print.printer_\\tina\NRG_MP_C3501_PS.print_headerleft: &T
print.printer_\\tina\NRG_MP_C3501_PS.print_headerright: &U
print.printer_\\tina\NRG_MP_C3501_PS.print_in_color: true
print.printer_\\tina\NRG_MP_C3501_PS.print_margin_bottom: 0.5
print.printer_\\tina\NRG_MP_C3501_PS.print_margin_left: 0.5
print.printer_\\tina\NRG_MP_C3501_PS.print_margin_right: 0.5
print.printer_\\tina\NRG_MP_C3501_PS.print_margin_top: 0.5
print.printer_\\tina\NRG_MP_C3501_PS.print_oddpages: true
print.printer_\\tina\NRG_MP_C3501_PS.print_orientation: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_page_delay: 50
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_data: 9
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_height: 11,00
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_name:
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_size_type: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_size_unit: 1
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_width: 8,50
print.printer_\\tina\NRG_MP_C3501_PS.print_plex_name:
print.printer_\\tina\NRG_MP_C3501_PS.print_resolution: 1
print.printer_\\tina\NRG_MP_C3501_PS.print_resolution_name:
print.printer_\\tina\NRG_MP_C3501_PS.print_reversed: false
print.printer_\\tina\NRG_MP_C3501_PS.print_scaling: 1,00
print.printer_\\tina\NRG_MP_C3501_PS.print_shrink_to_fit: true
print.printer_\\tina\NRG_MP_C3501_PS.print_to_file: false
print.printer_\\tina\NRG_MP_C3501_PS.print_unwriteable_margin_bottom: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_unwriteable_margin_left: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_unwriteable_margin_right: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_unwriteable_margin_top: 0
privacy.cpd.siteSettings: true
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.timeSpan: 0
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1399495195
user.js-inställningar
Din profilmapp innehåller en user.js-fil som inkluderar inställningar som inte har skapats av Firefox.
Grafik
Adapter-RAM: 512
Adapterbeskrivning: NVIDIA GeForce 7950 GT
Adapterdrivrutin: nvd3dumx,nvd3dum
ClearType-parametrar: D [ Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 50 ] D [ Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 50 ]
DirectWrite aktiverat: false (6.2.9200.16492)
Drivrutinsdatum: 1-31-2013
Drivrutinsversion: 9.18.13.783
Enhets-ID: 0x0295
GPU #2 aktiv: false
Grafikaccelererade fönster: 1/1 Direct3D 9
Leverantörs-ID: 0x10de
WebGL-renderare: Google Inc. -- ANGLE (NVIDIA GeForce 7950 GT Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: skia
AzureContentBackend: cairo
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
JavaScript
Incremental GC: true
Tillgänglighet
Aktiverad: false
Förhindra tillgänglighet: 0
Biblioteksversioner
NSPR
Förväntad minimiversion: 4.10.3
Version som används: 4.10.3
NSS
Förväntad minimiversion: 3.16 Basic ECC
Version som används: 3.16 Basic ECC
NSSSMIME
Förväntad minimiversion: 3.16 Basic ECC
Version som används: 3.16 Basic ECC
NSSSSL
Förväntad minimiversion: 3.16 Basic ECC
Version som används: 3.16 Basic ECC
NSSUTIL
Förväntad minimiversion: 3.16
Version som används: 3.16

Many site issues can be caused by corrupt cookies or cache. 
Clear the Cache 
'''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''
 and 
Remove Cookies '''''Firefox/Tools > Options > Privacy.''''' 
Under '''History''', select Firefox will '''Use Custom Settings'''. 
There is a button on the right side called '''Show Cookies'''. 
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; 
'''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''. 
Poke around safe web sites and see if there is still a problem. Then restart.
 
This may or may not help you; 
'''''[https://addons.mozilla.org/en-US/firefox/addon/nosquint/?src=external-Add-ons_Manager_Context_Menu-extension NoSquint]''''' 
NoSquint allows you to adjust the text-only and full-page (both text and images) zoom levels as well as color settings both globally (for all sites) and per site.

Upload problems with Facebook and Vimeo from Premiere Elements 10

I have created a project in HD and am trying to upload to Vimeo. Premiere Elements 10 does not have a preset so I followed some instructions from the Vimeo website. Project is "blurry" when viewed. I checked with Vimeo and they said what they converted matches what I sent so the problem must be in the export - bit rate may be incorrect. Can anyone give me the correct presets for Vimeo from Premiere Elements 10. I can view other people's video in HD and they look fine so I don't think it's my computer monitor. I'm sure you will need more information about my project so please give me a list of specific things you need to know. Thank you.
My Facebook problem is as follows. If I use the preset from Premiere Elements 10 to upload to Facebook it looks fine, HD quality as expected. Problem is, I would like to upload to my business page. Since the personal page and the business page (managed by my personal account) share a login, the preset always loads to my personal page. Does anyone know the values of the preset so I can upload the video to my business page. My business is event and wedding videography so I would like the posts to be as clear as possible.
If the problem with the Vimeo uploads is solved then I suppose I can just share the Vimeo file on Facebook. Thank you.

VDRAVES
I think that you are overlooking what you already have with regard to a Vimeo HD preset for export to file for upload of the saved file at the Vimeo website.
Please see
Share/Computer/AVCHD with Presets = Vimeo HD
Under the Advanced Button/Video Tab, you can customize the preset further from 1280 x 720 to 1920 x 1080 and increase the bitrate, if necessary, to a level that does not give you a prohibitive file size. With Profile = Main and Level = 3.1, the bitrate range is 0.19 to 14 Mbps (megabits per second).
I would start with the default bitrates of Target = 8 Mbps and Maximium = 9 Mbps and explore and experiment from there.
If you customize the preset to 1920 x 1080 in the Export Settings customization area, then change the Profile to High and the Level to 5.1
When you do that the bitrate range will be 0.19 to 300 Mbps instead of 0.19 to 14 Mbps.
In all cases, watch for file size versus bitrate versus quality of end product.
Please give that a look and then let us know if the above resolves your Vimeo and Facebook question.
Please review and let us know the outcome.
Thank you.
ATR

Having problem with adding and reading dates to/from database !!!

Hi
I am new in J2ME
I am trying to code a simple software.
My problem is with dates.
I have a datefield on my menu and the user will choose the date from here. By default, datefield shows todays date. But when I try to write that date to database using rms, date value transforms to java.util.Date@acfdb0fe.
As I read from tutorials this is common problem of date class, so I tried to use calendar class.
But with Calendar class I cannot let user to choose date from screen like DateField. datefield dowsn't work with calendar.
later, I will use that date for sorting records
Summary : I need a sample code that read date from screen (preferably with datefield), write it to recordstore. and then read it from recordstore asnd write to screen.
I searching internet for a sample code through days.
Please help me
Thanks

Hi,
The best i would suggest is instead of storing the date as 19 Jan 2004 or something like this better store the date in milliseconds.
DateField df = new DateField();
Date d = df.getDate();
long ms = d.getTime();
store the value of ms in RMS. This is the commonly used way to store date in RMS for j2me.
You can get back date using
Date d = new Date(ms);
DateField df = new DateField();
df.setDate(d);
Prabhu.

Firefox will not let me pay for things online when I reach the Secure Visa screen, because it will not proceed from that page. Is this a problem with my computer or with Firefox?

This occurs on every website where I have to type in letters from my password to confirm a payment.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Importing from BO XI R2 to 3.1 problems with Favorites and User Memberships

Similar Messages

Maybe you are looking for