Importing from camera, brings old in with new?

I'm using LR 5.7.1 on an iMac with Yosemite.
My camera is a Nikon D5000 and I shoot in RAW, no JPEG.
When I connect the camera to the computer to import directly into LR, I make sure it's set to only import new photographs. However, each time I go to import LR also brings in some (but not all) photos that have been previously imported.
II've tried this about four or five times in the month I've had LR and each time is the same.
please can you advise where I should be looking or what I'm doing wrong?
The Nikon software I was using works perfectly and only ever imports new photos, so I'm suspecting something about LR rather than the camera.

JimHess wrote:
Is it possible that you deleted some of the photos after you imported them? If so, then Lightroom would import them again because they would register as new images.
There's a workaround suggested by Victoria Bampton so rejected and deleted image files don't show as 'New Photos':
http://feedback.photoshop.com/photoshop_family/topics/lightroom_dont_re_import_deleted_pho tos_with_new_photos#reply_6460788
> LR knows I deleted the images, so show them in a different way (or not marked them as new).
That's the problem - once you've deleted them within LR, you've told LR to forget that they ever existed.
May I suggest a tweak to the workflow which may do the trick, at least until Adobe comes round to your way of thinking?
I can understand you not wanting to just reject them and keep them on the hard drive, as that'll take up hard drive space. But what if you marked them as rejected, dragged all of the rejected ones to a 'delete me' folder once you've finished culling, and then switch to Explorer/Finder to delete the photos out of that folder.
The references would remain in the catalog in that 'delete me' folder until you choose to wipe the card and remove those references, but the fact that LR still has those records would solve the import problem.

Similar Messages

Why did Lr5.7 add an identical volume to the destinations panel on import from camera card to which the new photos were added?

I've been using Lr5 for a little less than a year and had never used a photo management program before. Up until 2015 I downloaded photos to my external hard drive and imported to Lr from there. No problem. January 6 I decided to try to download directly from my camera card. Suddenly, on my destination panel an identical volume showed up and this is where the photos were imported to. I know it was identical because it matched the info on the original volume, and when I looked at my file structure in my HD, it was as it should be. When I tried to move the new files into the original folders I got a message the "a folder already exists in that location," which it of course would read because, as I said, my HD folders were formatted correctly. Here's a screenshot of how it looked:
I'm baffled. I found a workaround by setting up a temporary subfolder under my photograph library, moving them into that, and then into the correct folder. But I'm not sure it won't happen again. And I don't understand why it happened. Any help would be appreciated.

I am aware that if you remove any external drive the computer won't recognize it.
I safely ejected the SD card and closed iMovie then would reopen iMovie and insert the SD card multiple times and it did not work. I also tried restarting the computer a couple of times and also unsuccessful.

Photoshop "import failed" error. Photos won't import from camera. Anyone else with this error?

Hi,
I am using photshop elements 9 with windows 7. I have been successful in importing photos in the past. Recently I have received the error message "import failed" "95% nothing was imported the files or folder selected did not contain any supported file types or the files are already in catalog". The files are not in the catalog. I have uninstalled and reinstalled the program, I have repaired the catalog as suggested on another thread with the same issue. Nothing is working. On the catalog repair it said there were errors and I did the repair on those, I then tried to import again and got the same error message. I then tried to tag a photo that was already in organizer and received an error message that the files are corrupt.'m beyond frustrated now. Thanks
Annette

Annette,
Welcome to the forum.
As Curt points out, this is not the Photoshop Elements Forum. I will Move your post to that forum, where you will get great support. Your links and any e-mail subscriptions will follow perfectly.
[Moved to Photoshop Elements Forum]
Good luck,
Hunt

I migrated my old IMac to new and Aperture won't let me import from camera

I migrated old iMac to new and Aperture will not let me import from camera from. Migrating created two users and I get an error message saying I do not have permission write. I have gone to get info and it says I have read and write permissions.
iMac 10.7.5 Aperture 3.4.5

nopriors wrote:
I used migration Assistant
That's the problem. Apple doesn't make it clear that you should transfer when the new Mac starts up, not later on with Migration Assistant.
which told me to enter a new name . I had the new computer and old with same name. I called the new user my name with word "old" so not the same name as old Mac.
The problem isn't the names, it's the (mostly hidden) User ID number (UID). See the pink box in Problems after using Migration Assistant for an explanation of what happened.
Your best bet is to use one of the workarounds (probably #4) in the green box there, to re-transfer your account. It will have exactly the same name and permissions as before.
If you want to change the name, you can, but it takes a minor finagle. Post back if you want to do that.

Is there a way to use import from camera with a cannon 7d CF card so that you can select only the parts of the clips that you want?

I used to use log and transfer and now in final cut x I know you are supposed to use import file, however you have to import the entire clip instead of being able to select an in and an out point of the footage being imported. This is not good for me because I have a limited amount of space and if I'm going to be converting everything to prores and only using 65% of the footage that is a huge waste. Any help or work arounds would be appreciated. Thanks!

I import from P2 and 7D cards daily, it's super easy, very fast, very simple, not so complicated.
Here's how you do it.
1- CF card in a card reader, mount on Desktop, or copy whole card contents to a folder. (P2 can read directly from inside cam)
2- Open "Import From Camera" in FCP X.
3- Click "Open Archive" button.
4- Point to CF card.
* FCP X will act like L&T now.
* Select a Range of a clip you want to import, click import button.
* Select a different Range of same clip, click import button.
* If you want whole clips, highlight one or more whole clips, import.
* Imports are ProRes 422 files.
* If you want a backup of the CF or P2 card "as is", click the Create Archive button.
Very simple, no need for thrid party BS. It's really simple and easy.
Canon DSLR's have never been able to mount the cards while inside the camera. You have always needed a card reader.

Some JPG and AVI files imported from camera to iphoto, but not all

I just imported from camera to iPhoto using card reader and half the pics and a couple movies came over. The rest aren't recognized by my iMac, even though they say JPG and AVI and still run fine on camera. I installed Perian plugin a while back at the recommendation of one of you, which solved that problem and I just installed the recent update. I used time machine to restore old version, but that didn't work. I don't know if this is a Quicktime (v 7.4.1) issue or a problem with the flashcard. I tried opening via photoshop and iMovie. Photoshop CS3's message says "Could not complete your request because an unknown or invalid JPEG marker type is found." iMovie, when I try to drag movie into it says "The file could not be imported: ... Quicktime couldn't parse it: -2048". Hopefully one of you knows what is going on. Thanks!!!

Are you running a "referenced" or "managed" library?
Give this a try:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT

Originals auto modified on import from camera

I discovered that iPhoto has modified a lot of my pictures when importing from camera. Not only vertical photos (bacause of auto rotate I believe) but also landscape. Mostly photos with high contrast or too dark/too light photos are modified and enhanced. This makes me angry! I usually export photos to modify in PS and this way I do not work with the original! I suppose the modified version is not lossless.
I can't find out how to turn off this auto modifying.
Any suggestions?

hansik:
Are you aware that you can have iPhoto use PS as the default editor? The edited version is saved in the Modified folder and the originals never get touched. The only caveat is that you do not change the extension or file name. If you need to do either then you do a Save As to the desktop and then import as a new file.
Are you concerned about the thumbnail size increase due to HD space issues? There is a way to have your source files on an external HD and only have aliases, thumbnails and the modified files on your PB. My 27G (15,600+ files) of image files on my second HD are represented by a 1.75 G iPhoto library on my boot drive. When the external drive is not connected the library is still operational on a limited basis: you can view thumbnails, create, delete and move album folders, add comments and, with some hassle but doable, add keywords. You can't edit, work with books, slideshow, etc. or anything that requires moving thumbnails. Once the HD is remounted the library is fully functional again. Great for laptops with limited space.

Hi, i've imported some mts files from my camera on fcpx 10,04 then i erase them (also from the trash). now if i try to reimport them, the import from camera doesn't see them anymore even if i see the files in the finder. someone could help me??

Hi, i've imported some mts files from my camera on fcpx 10,04 then i erase them (also from the trash). now if i try to reimport them, the import from camera doesn't see them anymore even if i see the files in the finder. someone could help me??
ps
i got a backup for the files but even if they are on the mmc, when camera is connected fcpx doesn't see them. if i try to import a new shoot it works!!

Thx a lot Salty. As you suggest I found other staff on support pages. I deleted AVCHD structure and kept only .mts... Now what I need to do is to convert those files with handbrake or similar tool in .mp4 or .mov to make them digest to FCPX.

Opened Trial, keeps crashing on import from camera of AVCHD

Hi
I have a MBP 15" 2.66ghz running 10.6.8 with the NVIDIA GeForce GT 33M graphics card (also has the Intel HD Graphics card). I want to import .mts files from a Panasonic GH2 of interviews and location shots.
I'm basically following a Larry Jordan video: where he opens FCPX, creates an event and imports from camera. He's importing AVCHD clips and I watch as he chooses a folder which comtains ONE folder, titled 'Private'. He clicks on Private, clips appear and he chooses options and clicks import.
I did the exact same thing. Of course, AVCHD folders normally contain 3 folders one of which is named 'Private', but since he choose it I did too. There were 4 clips I selected to import without choosing Optimizing or any of the options on the dropdown. I quickly saw no progress was being made and within seconds the ball started spinning and I had to force close.
So I tried with one file--crashed. Tried choosing the folder with 3 folders including Private and copying one file--crashed. Finder too became dysfunctional and I had to force shutdown and restart several times.
Finally, when I started up FCPX wouldn't open. I had wanted to try transcoding one file. While I wait to give it a whirl:
Is it the .mts files?
Is it my graphics card or processor?
I checked FCPX Prefs but didn't see an indicator of ram being used, I have 8gb and would allocate all if helpful. Is it likely to transcode with ease?
ps I also have FCS and Adobe Premiere Pro CS5.0.0.

Yep, thx, excellent idea. In sys prefs one can do that--done.
I also did some testing to replicate problem: new user, safe mode. Crashes kept occurring.
WHAT WORKED and has made a demonstrable difference: Unchecking background rendering in prefs and pausing rendering in that little pop-up window that shows background activities while importing.
Immediately, I could import more files, tho so far I've only tried one at a time. Today I will try multiple file imports at same time.
I wonder what else I can do to limit FCPX ******* around while I import?
STILL CAN"T IMPORT long files, 24-min or 30-min files, without it crashing. Tho I come awfully close, 80%+, even 90%+ before stopping. Usually, it says 'import failed" and "try re-importing' and when I do that it crashes. I will try again, if still no success I will consider importing sections of one file. Some interviews are 1 hour+.
WILL EVENT SIZE cause crashes as my ability to import grows. That's what happens with Premiere Pro.
RESTABILIZING FINDER (Can a brother get a hand): Part of the problem post crash is that Finder is affected: Often I have to force shutdowns, attached drives can't be detached, even "Finder not responding". If my FCPX prefs get corrupted the same could happen to some Finder prefs.
FINDER HELP: After what I described, what prefs could I trash or other actions take to help Finder?
Thanks again for your help, Tom!! All the best!

Is there any way to Import From Camera (dv) in a way that Final Cut Pro can later import everything, including the audio

I know iMovie dv to Final Cut Pro has no audio. At least with my old events. But is there any way I can make it so future dv files Imported From Camera in iMove 2011 will later work in FCP?

Hi
Yes and No
And it depend's on what quality You want and how much problem You stand in FC - and what version of FinalCut You mean.
• FinalCut Pro-X - I have no clue at all
• FinalCut Express and Pro (till 6.0.6) - I'm very familiar to.
• If You take out the Imported/Captured material from Event's - it seems to be 100% OK - but in wrong codec so it will work in FinalCut BUT with a lot of RENDERINGS - every slight change = Need of RENDERING. To much for me.
• If You aim to do some Editing in iMovie them move over to FinalCut = Moving from Event's to Project's result in that every second line in the picture is discarded ( and can not be repaired ) so the project will lose a lot of quality - whatever way You use to Export/Move it over to FinalCut.
So at least I'm better of by Capture in FinalCut from Start as I can keep 100% quality till Movie is done.
Yours Bengt W

Import from camera (Canon XHA1) in FCPX

When I try to import footage from tape on a Canon XHA1 connected with firewire, it doesn't work, only the webcam appears as an option.
(I already changed the PLAYBACK STD to HDV andHD DOWN-CONV to OFF)
What to do?

ad 0)
why don't you select just the portions you need in FCPX import dialog? Imports from cam (or cam archives) allow the usual skimming, in/out and the new multiple in/out selections …-
ad 1)
I wouldn't use iM's imports at all in FCPX, see following …
ad 2)
yes, there is a loss; iMovie converts to AppleIntermediate, which is versatile but not as good as FCPX' prores.

Change import from camera destination default?

Hi,
Is these a way to change the "import from camera" destination defaults? I typically want to put new imports into new directory, and it would be helpful to specify a default parent directory.
Thanks. Kent

When I went to the Audio Midi setup, bit showed that the default audio output was already set to 44100hZ. I tried the camera again, no luck.
It is interesting that if I create a new project, it too will open with the filename and then (iSight) in brackets behind it - as if that is some type of preference setting, but I can't understand where it came from.
I couldn't see anything in the article.
Any other ideas?
Thanks,
Cheryl

I have lost my photos/videos when i imported from my ipad 2 to my new imac latest version and it's not reading the files. I have downloaded iMac library manager and can see them. can someone shed some light please ?

i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
and it's not reading the files. I have downloaded iMac library manager and can see them. when i go back into iphoto i'm getting the following message :
Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
I don't know what to do - please help !!!!
can someone shed some light please ?

So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Import from camera

Any idea how to import from a camera these days? In Aperture it found the camera automatically and you could select photos and import.
With Photos it seems that if I go to File > Import I can find my camera shown as an external drive but I can't then choose a sub folder so I can't seem to import any photos that way.
The way I'm doing it at the moment is through Finder - dragging and dropping onto the desktop and then importing that way.

Importing from cameras should work just as it did in iPhoto. As LarryHN points out, if it doesn't, let us know exactly what is occurring.
IF you have not yet done so, enable Sidebar (from the View menu). This will list the connected camera under the Devices group. When you select your camera, confirm that the Open Photos... option is checked.

Hang during import from camera or media - HELP!

iPhoto hangs during import from camera or media reader. Works for 20 or more photos, then hangs. No response at all. Must force quit. After restarting the import, it will go further the next time, then hang again. And again. And again. Eventually the import completes. After that, all is OK until next import. VERY FRUSTRATING. Especially with 8GB media cards. ARRGH!
I've tried rebuilding iPhoto library (all options). Using iPhoto 7.1.5 on OS X 10.5.6. 4GB ram, intel dual core.
Help me Obe-Wan. You're my only hope.

LarryHN wrote:
Once you get your photos use your camera to reformat your media card - problems like this can be caused by a flaw in the card format
And it is better to use a card reader to import yoru photos and after they are safely in iPhoto use your camera to reformat your card - this assues no data loss and keeps your card format fresh
LN
I usually use the media reader. After the imports started hanging is when I tried importing direct from the camera to see if it made a difference. No difference.
I've reformatted the media. No difference. Still hangs on first import after reformat. Multiple media cards, all same result. Tried different USB ports, same result. Tried different media readers. Same result.

Importing from camera, brings old in with new?

Similar Messages

Maybe you are looking for