Importing from Lexar card - error message

This has happened twice on two cards - one 4gb and the other 2gb, so not the same card but same camera (Nikon D2x). Get the error message " ICA download error -9919) occurred ...
Anyone any ideas if this Camera vs Leopard, Lexar vs Leopard or Aperture vs Leopard. As this never happened before Leopard and Aperture update.
Images are rescued from card via Lexar software, but it is a worry.

Hello, I've just upgraded computers, and as Leopard is on the new machine, gone from 10.4.10 to 10.5.1, and I'm now getting this ICA download error - 9919 while trying to import as well.
I'm using a Sandisk Extreme III 2gb card, and Aperture version 1.5.6. Storing the files in the Aperture library.
I've tried to change the permissions settings as indicated in this thread and the blog post at Inside Aperture, but it doesn't seem to be doing anything for me. And the permissions don't seem to be any different for the folders/files as they were in 10.4.10 (where everything was working fine).
The odd thing is, the card I'm trying to import from has both jpg and raw files on it, and Aperture will import all the jpg files no problem - it doesn't give me the error until it gets into the raw ones. So it seems like if it actually was a permissions issue, this wouldn't be the case (?)...
I went back to my old computer running 10.4.10 and tried it there, and everything works fine. So it seems to somehow be related to the switch to 10.5.1. I have the library in the same place, and haven't changed any other settings. I'm able to access all my existing photos on the new computer, so I believe everything's in the right place.
Anyone else having this issue where the permissions fix didn't resolve it? Any advice would be greatly appreciated!

Similar Messages

Import from scanner give error message "This file already exists in this catalogue"

I can import from the scanner occasionally, but often times get this error message. " this file already exists in this catalogue" and the scanned picture is discarded.
I see others have had it as well, but no solutions were posted. I'm running Photoshop elements 11 with all current updates.

Thanks for the reply. My Image wasn't in a version set however. I scanned a new photo which was successsful. I then scanned a second photo different from the first, which failed. I think possibly the software for my HP scanner is at fault, since it always names the scans as image1.jpg. It doesn't give an option to increment successive scans to a different name which probably caused the problem.

Import from SD card hanging

New laptop (toshiba qosimo w/20gb ram, ssd and hd), new os (windows 8), new version of lightroom (5.2) new bloatware (toshiba), new problems.
I can usually get one import from sd cards to work per boot in lightroom. when lightroom ejects and a new card is put in (I run several cameras per shoot) it shows the pix thumbnails, correctly identifies the new images and then just hangs on import. the import bar jumps to about 2/3 and stops, even running over night does nothing. At this point trying to use the windows explorer browser to access the sd card also hangs explorer. I can click the close "x" on the import status bar and it does eventually close though I must physically eject the card before the "Import Results" error dialog pops up. I can then re-mount the sd card and manually copy the files into thir dated folders, making new ones as needed, and sync the parent folder in lightroom and continue working but that is very tedious.
I've made sure all bloatware is not indexing, importing, or any other bad behavior. I have tried killing of all apps and background bloatware item by item with no success. Rebooting allows me one additional import but hangs on the second sd card.
While it criples lightroom I doubt it's lightroom's fault. Anyone have any ideas on how to troubleshoot? If it matters I'm using the built-in SDHC card reader which is a realtek pcie unit running the "RiconMan.exe" process. I've even tried killing that and letting it restart with no joy.
Thanks in advance,
Mark
UPDATE:
My third paragraph made me think it could be connected to the built-in reader so I searched around and eventually "borrowed" my wife's USB reader. I was able to do 2 imports on it after the 2nd import on the built in reader had failed. Looks like it's a conflict between realtek's reader and lightroom. I can copy files from several sd cards in explorer so this problem only seems to afflict lightroom.
Message was edited by: Mark4Cambodia

Photos > View > Show Sidebar
YOur card should be listed near the top of theSidebar. Select it and check the box above to Open Photos for this device.
You can also make Photos the default app in Image Capture.

How Can I Delete Originals I Don't Care to Keep When Importing From SD Card?

Hi All,
Just installed LR3 thanks to Santa. Have been going thru the video tutorials as well as the Lightroom_3_Help PDF and Lightroom-GettingStarted_Lo PDF but I can't figure out how to simply delete files from the gitgo when importing from SD Card or from my HDD (files already moved to HDD but not yet culled or imported into LR3). I was hoping I could, in LIBRARY, just r/c on a file that is plainly not worth keeping and just delete it so I dont have to do it later. Seems like I could, this way, be able to concentrate more on the shots requiring editing.
Also, need suggestions as to how I should import my files using DNG, Copy, Move, or Add. First off, I am not a working pro but am an occasional serious amateur. I'm picky and I like things to look good the first time and I like options. The pix already on my HDD are in the PICTURES folder; those imported from SD card get moved to that PICTURES folder. I have, in the past, moved the processed verssions to a different DESTINATION folder - now I still have the originals and I have processed copies to post and share.
I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
Thanks in advance,
Phil in San Diego

Phil,
PhilipCWells wrote:
I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
The LR Exchange site has three plug-ins that allow you to keep a "mirror" copy of your DNG/RAW images in JPG format for use by others without having to go into LR and generate them when needed. The link is:
http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=tree&search_exchange=25&search _category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&start num=1&event=search&sticky=true&sort=0&rnav_dummy_tmpfield=&Submit=
One of them should help you with this.
Jeff (in San Diego as well)

"Importer reported a generic error" message while importing ProRes 422 clip

Hi all. I am getting an "Importer reported a generic error" message when I try to import a ProRes 422, linear PCM clip into Premiere Pro CS6. I have imported other ProRes 422 clips in previous projects without a problem, although those clips did not have the linear PCM codec included. I have tried to solve the problem using advice on other forum threads. Changing the file name did not work. Removing underscores in the file name did not work either. Copying the file and pasting to a different folder before re-importing did not work either. The file DOES open in AE, but I am getting the error message without fail when I try to import into Premiere. Any thoughts on how to remedy the situation? FYI - I am still running version 6.0.0 of Premiere. Thanks for your help!

Try going to Help | Deactivate in Pr. Close Pr. Reboot. Launch Pr and activate if requested. That procedure has helped some users restore missing codecs and presets, maybe it'll help your Dynamic Link.
Jeff

Hp officejet pro l7590 with blinking memory card error message

My all-in-one printer constantly blinks the yellow exclamation point and has the message Memory Card Error for no apparent reason. I have not used a memory card. It just decided to show the message and blink. I turned it off and on again, with no change. How do I make it stop?

Experiencing the same problem, so did some troubleshooting of my own. I am using Windows 7; however, the OS should not make a difference since this is the built-in card reader which can be used without a computer being connected. Specifically, I was trying to read an SD card to make a proof sheet.
I knew I had been able to read an older Compact Flash card, so tried that and was successful. Then I tried an older SD card that is only 128MB -- no problem. A closer look at the card causing the "Memory Card Error" message revealed that it is a 4 GB SD HC card. The printer documentation includes Secure Digital in the list of supported memory cards, but not the newer variants.
Clearly, the error message is caused by attempting to read a non-supported memory card.

Try to retrieve data from database got error message

Try to retrieve data from database got error message *"java.lang.ArrayIndexOutOfBoundsException: 2*
*     sun.jdbc.odbc.JdbcOdbcPreparedStatement.clearParameter(JdbcOdbcPreparedStatement.java:1023)*
*     sun.jdbc.odbc.JdbcOdbcPreparedStatement.setDate(JdbcOdbcPreparedStatement.java:811)*
*     guestbk.doGet(guestbk.java:32)*
*     guestbk.doPost(guestbk.java:73)*
*     javax.servlet.http.HttpServlet.service(HttpServlet.java:710)*
*     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)"*
I have used prepared statment
java.text.SimpleDateFormat sdf = new java.text.SimpleDateFormat("dd/MM/yy");
            java.util.Date dt = sdf.parse(str3);
                   Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                   con=DriverManager.getConnection("jdbc:odbc:gbook");
                   //Statement stmt=con.createStatement();
PreparedStatement ps = con.prepareStatement("SELECT * from gbook where emailid =? AND date =?");
ps.setString(1,str1);
ps.setString(2,str2);
ps.setDate(3,new java.sql.Date(dt.getTime()));
//ps.executeQuery();
                   //ResultSet rs=stmt.executeQuery("select * from gbook where emailid = str1");
              ResultSet rs = ps.executeQuery();
                   out.println("<Html>");
                out.println("<Head>");
                   out.println("<Title>GuestBook</Title>");
                   out.println("</Head>");
                   out.println("<Table border=1 align=center >");
                   out.println("<H4><B><center>Teacher's Lesson Plan</center></B></H4><BR>");
                   out.println("<TR><TD><b>Teacher Name</b></TD><TD><b>Class</b></TD></TR>");
           while(rs.next())
                    ctr++;
                    String email=rs.getString("emailid");
                    String cmt=rs.getString("comment");
                    out.println("<TR><TD>"+email+"</TD><TD>"+cmt+"</TD></TR>");
        }Please anybody help .

PreparedStatement ps = con.prepareStatement("SELECT * from gbook where emailid =? AND date =?");
ps.setString(1,str1);
ps.setString(2,str2);
ps.setDate(3,new java.sql.Date(dt.getTime()));Your SQL query has 2 placeholders but you try to set 3 values.
And didn't you read the stack trace?
guestbk.doGet(guestbk.java:32)You could've tracked down line 32 and seen what was there at that line.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://www.catb.org/~esr/faqs/smart-questions.html
----------------------------------------------------------------

Confusion re: photostream, import from memory card, events, etc.

confusion re: photostream, import from memory card, events, etc.
Up until a few weeks ago, my travel-photo-handling went like this:
Each night, I download photos to my iPad for safekeeping. They, of course, wind up in Photostream.
When I return home, I connect my camera card to my iMac (where I have my iPhoto library), and I can "see" the photos on my memory card - the photos which, although in Photostream, I have not yet manually downloaded.
I select and ownload them.
New Events are created in my Library automatically, as I have my preference set to Autosplit Events.
This week, I came home from a trip during which I had downloaded to iPad during my time away.
I connected my memory card to the iMac.
iPhoto did not "see" any photos to import - as far as iPhoto was concerned, those photos were already in my Library.
I had iPhoto show all photos on my card, selected the photos from my trip (I shot over 1000) and clicked "Import Selected"
iPhoto says they're duplicates.
However, the photos have NOT been downloaded manually and there are NO Events in my Library for those days.
Note: yeah, they're in Photostream, but IN THE PAST - and I mean literally up until 3 weeks ago - the photos have ALWAYS been "visible" and importable even if in Photostream, as long as I had not yet manually downloaded to the computer.
So my question, I guess, is multi-part:
What changed in iPhoto and/or Photostream in the past couple of weeks?
Why are Photostream photos suddenly considered to be the same as the photos on my card which have not yet been manually downloaded to the computer?
What the heck is going on?
I hate having duplicates, but I also hate being confused by something that used to be really easy, then - with Photosream - became annoying, and is now simply perplexing and sometimes imcomprehendable.

Check iPhoto's Photo Stream preference pane to see if the highlighted checkbox in the screenshot below is checked. If it is then all photos taken by the iPad are automatifdally being imported into your library.
Go the the Events mode and check the View ➙ Sort menu option to verify where new Evens will be located, at the top of the window or the bottom. Then check to see if your PS pictures are there.
As a test launch iPhoto with the Option key held down and create a new, test library. Connect your iPad and import all photos. Dismount the iPad, close and reopen the test library, connect the iPad again and test to see if the same problem persists. Does it?
If it does'nt then your current library is damaged and needs to be repaired.
OT

IPhoto can't import from CF card

Hi,
today when trying to import some photos from my kids rugby game, iPhoto can't import several of them. In total there are 51 photos on the newly formatted CF card and 5 of them doesn't even have a thumbnail picture, and even more of them can get imported to iPhoto. I get a kind of nonsense error message telling me that iPhoto can't import a picture because it can't get recieved or something similar. If I use Image Capture I get 38 of them imported.
I really want to save these photos, what can I do?
And what has happened, is it the memory card that is bad? I sure must prevent this from occuring again in the future.
Thanks...
/Mans

Are you importing via a card reader or are you plugging the camera directly into the computer?
My suggestion is if you are using a card reader, you may want to go through the camera instead if you can to see if the camera is better able to hand off the photos to the Mac.
But it sounds more like a card issue if you have problems outside of iPhoto like when trying to use Image Capture.
Patrick

IPhoto says 'Files Cannot Be Found' when trying to import from SD Card

Hello all,
I have this stupid little problem with my iPhoto.
Every time I plug my SD card to import pictures I took from trips or whatnot to iPhoto, it says 'Files Cannot Be Found' but when all said and done, the files are actually there. I don't know what the problem is, but it's very annoying and I don't know how to fix it.
I highly doubt it's my camera setting and want to know if there's anything I can do within iPhoto to change that stupid little error message I get every time I try to import my photos.
For example, when I try to import like 40 pictures, at least 7-8 would alert me saying 'File Cannot Be Found'. I hit okay button and goes to next file... I have no idea what it is and it really kills me. Can anyone help?

This can occasionally happen, if iTunes cannot find your iTunes library. Do you keep your iTunes library on an external drive? Then check, if this drive is properly mounted. Does it appear on your desktop?
Sometimes simply rebooting will resolve problems with a drive that is not accessible. Also, check the settings for the location of your iTunes Media folder in the iTunes Preferences > Advanced panel:

Lightroom hanging on import from SD Card

When importing Nikon RAW images from an SD card on Lightroom 5.7 and copying to harddrive (Macbook Pro 5,4 15", OSX Mavericks, 8Gb Ram, 1Tb HDD), Lightroom hangs. When 'import' is stopped, it is not possible to import from the same source a second time (though SD Card is still shown as connected in finder).
Lightroom will then not shut down and needs to be force-quitted.
If I copy all of the images to a new folder on the desktop, everything works fine. If I add the SD card as a library location and import to itself, it works fine.
This problem has only started happening with LR5.7. All previous versions of Lightroom 3, 4 and 5 worked perfectly.
The problem report (to be sent to Apple) is below:
Chris

I use an SD card and checked it with MS Explorer, no error messages, neither with the restore programs, so I assume it is ok.
In LR I tried to import the files: Copy to new location (on hard drive) plus parallel backup copy to another folder. Seemed to work ok until I clicked in LR on the "cancel import". Import stopped.
I deleted the imported images (if I remember correctly I used the LR function) as I wanted to have them in the same folder but with correct numbers.
Started again to import but as mentioned above, no images could be found by LR on the card. Checked with MS Explorer - no error messages, but no files, all 1.88 GB free on card.
Used two different recovery programs, both recovered all 99 images and copied them to a folder on the hard drive.
Tried again with LR to import from hard drive folder. All 99 image file names appeared in the preview, but all images apart from the first 14 plus image 22 were completely grey (as the frame). And only the 14+1 were imported.

Import from SD card interrupted - all images lost on card

Hi LR friends,
I imported dng-files from a 2GB SanDisk into LR but noticed after about 70 images that I had selected wrong numbering (starting at 99 instead of 1). So I clicked on the button Cancel in LR (the X on the top left of the screen).
It stopped and I started again with correct number. But no files could be found on the card! I checked with MS Explorer, no files either. I tried 2 different recovery programs (one called recuva). Both programs recovered all files, no error messages.
So I started again but LR imported only the first 14 images plus an image 22 or something like that. All other images were grey in the preview and not imported. I tried it twice and also with PS Elements 6, error message: "file format unknown" (in German).
The files are listed correctly as dng-files. I use XP Pro (up to date) and LR 1.3 (not 1.3.1). I would be grateful for any help! Thanks in advance!
Wolfgang

I use an SD card and checked it with MS Explorer, no error messages, neither with the restore programs, so I assume it is ok.
In LR I tried to import the files: Copy to new location (on hard drive) plus parallel backup copy to another folder. Seemed to work ok until I clicked in LR on the "cancel import". Import stopped.
I deleted the imported images (if I remember correctly I used the LR function) as I wanted to have them in the same folder but with correct numbers.
Started again to import but as mentioned above, no images could be found by LR on the card. Checked with MS Explorer - no error messages, but no files, all 1.88 GB free on card.
Used two different recovery programs, both recovered all 99 images and copied them to a folder on the hard drive.
Tried again with LR to import from hard drive folder. All 99 image file names appeared in the preview, but all images apart from the first 14 plus image 22 were completely grey (as the frame). And only the 14+1 were imported.

Newbie, Help! iTunes won't play or import random files - no error message

Have a large library of MP3 files created with Real Audio. All played well in Real Audio or Windows Player. I did a complete unintall of Real Audio, installed ITunes, and while it accepts some of the songs(files), it doesn't accept others. It seems utterly random. There are no differences between the files. All are legit. I do not get an error message, but NOTHING happens no matter what method I employ to play or import the song/file. Have compared file attributes via properties and there is no difference. Itunes is the default player, and I have not reinstalled Real Audio. I just listen to the songs on computer while working, but thought I would try Itunes and get an IPod. Not off to a very good start.

I suppose Real Audio was used, though for sometime I used Iomega to store them on zip disks. It has been a long time. For the CD's that I have on hand, I have been doing what you suggested. This is not easy, as the old files were just all together in one file, and while I thought I had changed settings so that iTunes would do the same (after learning that iTunes puts things in lots of different folders - especially confusing for me with soundtracks with different artists)the last one I did was put in folders entitled unknown/unknown with only track numbers. And if I change anything using explorer, I have to find each file for iTunes again. I'm still struggling, not understanding how these mp3 files are different in some way. Some are from the same CD's. At any rate, now that I am (found your term) ripping these CD's again, is there a way to avoid all the folders and layers of folders? Thank you for your patience. Obviously when my daughters were here to help, me being green was not a problem@

Importing CD - No Disk Error Message When Ejecting CD

Every since I upgraded my itunes to the latest version, I am getting an error message telling me there is no cd every time I eject my cd after importing. It gives me an option to retry, continue and cancel. No matter what I pick it does not recognize the next cd and my windows cursor is stuck in a rotating hourglass position even after I end the itunes program! Can anyone please shed some light? Thank you!

Thanks Bob! My problem was that I was following advice from elsewhere on the internet that said I should burn a DVD in UDF format when in fact just burning it using disk utility in ISO made it work. Thank you so much!

Photos sent to file on desktop when importing from memory card

The photos sent to a file when importing from a memory card appear in the file as Adobe documents and cannot be opened. If I try to open a message appears 'Adobe Reader cannot open this document as it is not a supported file/
What has gone wrong?

You have already opened a thread on this issue, we don't need a second thread on the same issue.

Importing from Lexar card - error message

Similar Messages

Maybe you are looking for