Importing From Min-DV Camcorder: Sound on One Clip, not the Other

Hello,
Taped a live presentation on Canon HV 20. Part of the way through, briefly stopped then re-started camera. After importing to iMovie 6, the 16 minute clip 'pre-break' has no sound on playback, although it had sound in 'monitor mode' and on the tape. The 22 minute post break footage plays sound just fine.
Thanks,
DoubleJD2

Here you go. I don't know exactly what I did to make the timeline clips disappear, but I was trying to find the effects clip and that's how it happened. I know I used the relink project files option to do so, and after that I couldn't find anything. I've checked everything and everywhere including trash, but nada!

Similar Messages

Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

The same cuts that I have in this clip that i performed with the blade tool, I want to duplicate, copye, paste and apply to another clip. I want the cuts to mimic and be an exact same. I wish i could highlight the clip, click copy and then highlight the other clip and then click paste and the cuts apply.

Two email accounts, one password for both. will check one but not the other. Have had no problems before

I have 2 email accounts for 2 people. TB will download mail for one but not the other. It can't authenticate the password. Passwords are both the same. Worked fine until today.

The amount of information makes it somewhat hard to give a specific answer. I could only recommend:
* Can you log into the account using the webmail service from your provider?
* Have you verified the settings for the account to be correct (protocol, port number, password encoding)?
The following page gives you a good start with resolving this issue:
https://support.mozilla.org/en-US/products/thunderbird/fix-slowness-crashing-error-messages-and-other-problems/fix-problems-email-providers-gmail-yahoo-etc
Hope this helps!

HT5622 How do I set icloud on 2 ipads.It recognises one,but not the other one?

How do I set up icloud on 2 ipads? It recognises one but not the other one.

Hi Leora Beisly,
Thanks for visiting Apple Support Communities.
Before setting up iCloud on your devices, I recommend updating to the latest iOS software version. This will ensure that you can use all of the iCloud features on your devices. See this article for information on updating your iPads:
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Next, see this page for iCloud setup instructions:
iCloud: Set up iCloud on your devices
http://support.apple.com/kb/PH2609
Before you can use iCloud on each of your devices, you need to sign in to iCloud using your existing Apple ID or a new one, then turn on the iCloud features you want to use.
You may have set up iCloud on your iOS device or Mac when you first used it. To make sure it’s set up correctly, or to set up your iCloud account on another iOS device, computer, or Apple TV, go to the set up iCloud website listed below.
Important: Be sure to use the same Apple ID when you set up iCloud on each device.
Best Regards,
Jeremy

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
Then File menu > Browse in Bridge will bring up Bridge CS6.
If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
I hope that's the answer you were looking for.
Gene

I have 2 iPod touchs and 1 computer. It will reconize one but not the other. How do I get it to sync music on both

I have 2 older iPod touches and 1 computer. It will reconize one but not the other. How do I sync music on both?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar

I have 2 iPads, I can only download some apps to one device not the other one?

I have 2 iPads, but can only download some apps to one and not the other?. How can I get the same app on both iPads?
Thanks

1. Make sure iPad is using the latest software
2. Settings>General>Date and Time>Set Automatically>On
3. Make sure Time Zone is correct
4. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo.

I bought a 5th Gen Touch. I use iTunes 12 on two computers. One computer allows me to drag and drop. The other does not.The one that allows it has problems. Any idea as to why I can drag and drop on one and not the other. Both are authorized.

I bought a 5th Gen Touch. I use iTunes 12 on my two computers. I first connected the Touch to my desktop and it allows me to drag and drop mp3 files from my old Classic, which is backed up to a directory. Unfortunately, that computer has gone down before I got a chance to fill the Touch. I have the files on another computer but when I connect the Touch to it, it doesn't allow me to drag and drop the files. I have iCloud set on both systems and I have manual management check marked. I'm not understanding why it allows drag and drop on one PC and not the other when they are both set the same way. My question? What do I need to do to be able to drag and drop in iTunes 12? I didn't do anything special on the computer that allows it so I am at a loss.
Thank you!

Oh, also want to add that the PC I'm currently using is:
Windows Vista Home Premium Service Pack 2
My other PC was:
Windows 7 Ultimate
My MacBook is:
Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
Not sure if this stuff is important, but I thought I'd add it.

2 Apple TV's; Mirroring to one but not the other

Help me Apple Communities you're my only hope.*
I have 2 Apple TV's on the local network, bothe with Airplay enabled. One labelled AppleTV, the other labelled TV Upstairs.While I can happily stream music and video to both devices from iOS or the MacBook Pro, Mirroring is another matter.
On my iPad 2 when I select Airplay to the Apple TV it comes up with the option for Mirroring. However selecting the TV Upstairs Apple TV does not provide this option, and only sound output only, with quite a delay. The iPad 2 is iOS5, and both Apple TV's are latest stable release. The Time Capsule is upstair with the Upstairs AppleTV.
Any ideas for this?
* guess what I was testing video streaming with.

I think you may be suffering from the same issue as many others in that case.
The situation over the current update seems a little unsure at the present time.
4.4 was released, it was then replaced by 4.4.1, which itself was removed and then made available again, it seems from the number of related post that it may have been removed again.
Some posters are still reporting success by updating via iTunes but I can't confirm that these posts weren't simply referring to other times when the updates were available.
I'd be inclined to sit tight and try again at a later time.

Script works on one site, not the other... why?

Could someone tell me why this prototype-based lightbox seems
to work on one
site but not on the other?
I literally took the exact same .js & css files, copied
them over from one
site to the other, but it's only partially working on the new
site.
http://www.vilverset.com/sample.html
And the original fully-functional one :
http://www.roxanacampagiorni.com/
Been troubleshooting this one for days, and I'm stumped.
Script wants
nothing to do with lightboxing HTML files on the new site.
Only straight
JPGs.

"Michael Fesser" <[email protected]> wrote in message
news:[email protected]..
> .oO(Mark A. Boyd)
>
>>Strange. I don't think I've ever seen these headers
before:
>>
>>
http://www.vilverset.com/tn_posters.html
>>POST /tn_posters.html HTTP/1.1
>>HTTP/1.x 405 Method Not Allowed
>>Allow: GET, HEAD, POST, PUT, DELETE, CONNECT,
OPTIONS, PATCH, PROPFIND,
>>PROPPATCH, MKCOL, COPY, MOVE, LOCK, UNLOCK
>>
>>I suspect a server configuration - or version.
>
> I consider it a script problem. Why does it send a POST
request instead
> of GET? IMHO the server's response is correct, because
it doesn't make
> much sense to POST something to a static .html page.
That's what I told a helper friend of mine, but he told me
the POST is done
by the server, not the JS files. That's why, according to
him, he couldn't
tell me what code to change in the .js files.
But here they are, if you would be so kind as to tell me WHAT
to replace
with WHAT so the call is made properly. :-)
http://www.vilverset.com/scripts/control.modal.2.2.3.js
http://www.vilverset.com/scripts/effects.js
http://www.vilverset.com/scripts/prototype.js
Those are the 3 files needed for the script.
Should I be banging on Dreamhost's door to fix something, or
not? Because
the exact same 3 files will render an HTML page just fine
over on
roxanacampagiorni.com.
Which is the guilty party? The script, or the server config?

2 identical iPhones-Airprint works one, but not the other?!

My husband and I both have iPhone 4S 32GB. We're using an HP Photosmart 6510 which is both ePrint & Airprint ready. Here's the problem:
I can print via ePrint or Airprint, but my husband's phone will ONLY do ePrint. I don't get it! We have the printer and both iPhones on the same wireless network. He even gets a message that his print job is sending/printing, but nothing prints. I can Airprint the same file from the same e-mail and it works fine. HP is useless...they just keep telling me to reboot the phone and/or reboot the printer. This fixes the problem initially, but a day or two later, the same thing happens. it's very frustrating and I'd really like a permanent fix for this.
Can anyone help?! Please?!
Thank you!!

Thanks for the feedback. It's worth a try. What's making me crazy is why would one phone work and not the other? Rhetorical question, but still making me crazy.

Trying to manually sync 2 phones, songs show on one, but not the other

Hi all,
I recently upgraded my daughters cell phone to my wife's old iphone. I successfully imaged my wifes old phone (4) to her new one (4s). I then restored that phone to factory settings create my daughters. I was adding music from iTunes, which I also sync to my iphone (4). Some of the songs are showing as greyed out on her device. They show up fine, and can be played on mine. It seems to be somewhat random - sometimes, track 01 is there and the others aren't, sometimes the whole album is not there, sometimes a single song that's on a playlist is greyed, sometimes they are there. I did another factory reset and reinstall on her phone with the same results.
Thanks

hi catfish197621,
Welcome to the Lenovo Forums.
You can try to:
1. Download the latest updates Over The Air (OTA) to get the latest patches and bug fixes on the OS (go to settings > about tablet > check for system update).
2. Download a camera app utility like Camera Zoom FX to see if you can zoom in and out and switch to the front facing camera.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Why the error in one, but not the other

Why does this code Generate the error:
Complex object types cannot be converted to simple values.
The expression has requested a variable or an intermediate
expression result
as a simple value, however, the result cannot be converted to
a simple
value. Simple values are strings, numbers, boolean values,
and date/time
values. Queries, arrays, and COM objects are examples of
complex values.
The most likely cause of the error is that you are trying to
use a complex
value as a simple one. For example, you might be trying to
use a query
variable in a <CFIF> tag. This was possible in
ColdFusion 2.0 but creates an
error in later versions.
The error occurred in
C:\Inetpub\wwwroot\2onboard\kBookList.cfm: line 40
38 : <tr>
39 : <td colspan="6">
40 : <cfif showList IS NOT "yearly"><a class="nav"
href=""> Yearly  </a>  </cfif>
41 : <cfif showList IS NOT "complete"><a class="nav"
href=""> Complete  </a>  </cfif>
42 : <cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
List  </a>  </cfif>
CODE.........
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>2onboard.com - Kevin's Korner - Book
List</title>

<cfparam name="showList" default="complete">
<cfparam name="showOrder" default="title">
<cfparam name="showStatus" default="own">

<cfquery name="showList" datasource="2onboard">
SELECT
title,author,status,completed,pages,queue,rating,cover,series,book,link
FROM books
WHERE status = '#showStatus#'
ORDER BY '#showOrder#'
</cfquery>
</head>
<body>
<div id="container"> 
<cfinclude template="header.cfm"> 
<cfinclude template="explanation.cfm"> 
<div class="raised"> 
<b class="top"><b class="b1"></b><b
class="b2"></b><b class="b3"></b><b
class="b4"></b></b>
<div class="boxcontent">
<div class="boxcontenttext">
<table cellspacing="0">
<tr>
<td><span class="title">Kevin's
Korner</span><b> - Reading</b></td>
<td colspan="5"
align="right"><cfoutput> Library contains
<b>#showList.recordCount#</b>
books</cfoutput></td>
</tr>
<tr><td colspan="6"><span
class="spacetext"> </span></td></tr>
<tr>
<td colspan="6">
<cfif showList IS NOT "yearly"><a class="nav"
href=""> Yearly  </a>  </cfif>
<cfif showList IS NOT "complete"><a class="nav"
href=""> Complete  </a>  </cfif>
<cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
List  </a>  </cfif>
</td>
CODE CONTINUES ON FROM HERE….
BUT, if I take just the bare minimum and test it as the
following, it works fine - WHY?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<cfparam name="showList" default="complete">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title> </title>
</head>
<body>
<cfif showList IS NOT "yearly"><a class="nav"
href=""> Yearly  </a>  </cfif>
<cfif showList IS NOT "complete"><a class="nav"
href=""> Complete  </a>  </cfif>
<cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
List  </a>  </cfif>
</body>

> <cfparam name="showList" default="complete">
This line creates showList as a simple string variable
containing
"complete".
> <cfquery name="showList" datasource="2onboard">
This line redefines showList as a recordset containing the
data returned
from the database which is not a simple variable and can not
be accessed
with code such as <cfoutput>#showList#</cfoutput>
> <cfparam name="showList" default="complete">
This line does NOT redefine showList back to a simple string
because a
<cfparam ...> only fires if the variable does not
exist. The previous
two lines would create the variable, thus it exists.
jkgiven wrote:
> Why does this code Generate the error:
>
> Complex object types cannot be converted to simple
values.
>
> The expression has requested a variable or an
intermediate expression result
> as a simple value, however, the result cannot be
converted to a simple
> value. Simple values are strings, numbers, boolean
values, and date/time
> values. Queries, arrays, and COM objects are examples of
complex values.
>
> The most likely cause of the error is that you are
trying to use a complex
> value as a simple one. For example, you might be trying
to use a query
> variable in a <CFIF> tag. This was possible in
ColdFusion 2.0 but creates an
> error in later versions.
>
> The error occurred in
C:\Inetpub\wwwroot\2onboard\kBookList.cfm: line 40
>
> 38 : <tr>
> 39 : <td colspan="6">
> 40 : <cfif showList IS NOT "yearly"><a
class="nav"
>
href=""> Yearly  </a>  </cfif>
> 41 : <cfif showList IS NOT "complete"><a
class="nav"
>
href=""> Complete  </a>  </cfif>
> 42 : <cfif showList IS NOT "wish"><a
class="nav" href=""> Wish
>
List  </a>  </cfif>
>
>
> CODE.........
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <title>2onboard.com - Kevin's Korner - Book
List</title>
>
> 
> <cfparam name="showList" default="complete">
> <cfparam name="showOrder" default="title">
> <cfparam name="showStatus" default="own">
>
> 
> <cfquery name="showList" datasource="2onboard">
> SELECT
title,author,status,completed,pages,queue,rating,cover,series,book,link
> FROM books
> WHERE status = '#showStatus#'
> ORDER BY '#showOrder#'
> </cfquery>
>
> </head>
>
> <body>
>
> <div id="container"> 
> <cfinclude template="header.cfm"> 
> <cfinclude template="explanation.cfm"> 
>
> <div class="raised"> 
> <b class="top"><b class="b1"><b
class="b2"><b class="b3"><b
> class="b4">
> <div class="boxcontent">
> <div class="boxcontenttext">
> <table cellspacing="0">
> <tr>
> <td><span class="title">Kevin's
Korner</span>
- Reading</td>
> <td colspan="5"
align="right"><cfoutput> Library contains
>
#showList.recordCount# books</cfoutput></td>
> </tr>
> <tr><td colspan="6"><span
class="spacetext"> </span></td></tr>
> <tr>
> <td colspan="6">
> <cfif showList IS NOT "yearly"><a class="nav"
>
href=""> Yearly  </a>  </cfif>
> <cfif showList IS NOT "complete"><a class="nav"
>
href=""> Complete  </a>  </cfif>
> <cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
>
List  </a>  </cfif>
> </td>
>
> CODE CONTINUES ON FROM HERE?.
>
> BUT, if I take just the bare minimum and test it as the
following, it works
> fine - WHY?
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
>
> <cfparam name="showList" default="complete">
>
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <title> </title>
> </head>
>
> <body>
>
> <cfif showList IS NOT "yearly"><a class="nav"
>
href=""> Yearly  </a>  </cfif>
> <cfif showList IS NOT "complete"><a class="nav"
>
href=""> Complete  </a>  </cfif>
> <cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
>
List  </a>  </cfif>
>
> </body>
>
>
>

Capturing webcam works on one computer, not the other.

Step 1 - I did all the JMF stuff and got the JMStudio working on my laptop that has a built in webcam.
Step 2 - I went into the JMF Registry, pulled out the video capture device (vfw:Microsoft WDM Image Capture (Win32):0) and edited it into the SwingCapture application posted below and got the custom application working flawless.
Step 3 - Everything worked perfect so I loaded all the JMF/Eclipse stuff onto my uncle's laptop and plugged in his Panasonic PV-GS120 handheld video camera that also has webcam drivers.
Step 4 - Got the JMStudio working perfect with this webcam device and all is well.
Step 5 - Copied over my modified application (SwingCapture) and pulled the appropriate capture device (vfw:Microsoft WDM Image Capture (Win32):1) from JMF Registry and edited it into the right spot in the application.
Step 6 - Tried to run the application and got the following error:
java.io.IOException: Could not connect to capture device
java.io.IOException: Could not connect to capture device
javax.media.NoPlayerException: Error instantiating class: com.sun.media.protocol.vfw.DataSource : java.io.IOException: Could not connect to capture device
     at javax.media.Manager.createPlayerForContent(Manager.java:1362)
     at javax.media.Manager.createPlayer(Manager.java:417)
     at javax.media.Manager.createRealizedPlayer(Manager.java:553)
     at SwingCapture1.<init>(SwingCapture1.java:58)
     at Runner.main(Runner.java:17)SwingCapture1 Code:
import com.sun.image.codec.jpeg.JPEGCodec;
import com.sun.image.codec.jpeg.JPEGEncodeParam;
import com.sun.image.codec.jpeg.JPEGImageEncoder;
import javax.media.*;
import javax.media.control.FrameGrabbingControl;
import javax.media.format.VideoFormat;
import javax.media.util.BufferToImage;
import javax.swing.*;
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import java.awt.image.BufferedImage;
import java.io.FileOutputStream;
import java.util.Timer;
import java.util.TimerTask;
public class SwingCapture1 extends Panel implements Runnable, ActionListener
     private static final long serialVersionUID = 1L;
     public static Player player = null;
     public CaptureDeviceInfo di = null;
     public MediaLocator ml = null;
     public JButton capture = null;
     public JLabel frequencyLabel = new JLabel("Frequency:");
     public JTextField frequencyInputField = new JTextField(10);
     public JPanel southPanel = new JPanel();
     public static Buffer buf = null;
     public static Image img = null;
     public VideoFormat vf = null;
     public static BufferToImage btoi = null;
     public static ImagePanel imgpanel = null;
     static int i = 0;
     static String filePrefix = "";
     static String imagesDirectory = "c:\\images\\";
     Thread capThread;
     Toolkit toolkit;
     public SwingCapture1()
          setLayout(new BorderLayout());
//          setSize(640, 480);
          imgpanel = new ImagePanel();
          capture = new JButton("Capture");
          capture.addActionListener(this);
          System.out.println("TEST1");
          final String str = "vfw:Microsoft WDM Image Capture (Win32):1";
          di = CaptureDeviceManager.getDevice(str);
          ml = new MediaLocator(str);
          try
               player = Manager.createRealizedPlayer(ml);
               System.out.println("TEST2");
               player.start();
               Component comp;
               if ((comp = player.getVisualComponent()) != null)
                    add(comp, BorderLayout.LINE_START);
//               add(capture);
               add(imgpanel, BorderLayout.LINE_END);
               add(southPanel, BorderLayout.SOUTH);
               southPanel.add(frequencyLabel);
               southPanel.add(frequencyInputField);
               southPanel.add(capture);
          catch (final Exception e)
               System.out.println("ERROR 1");
               e.printStackTrace();
     public static void playerclose()
          player.close();
          player.deallocate();
     public void actionPerformed(final ActionEvent e)
          final JComponent c = (JComponent) e.getSource();
          if (c == capture)
          { // Grab a frame
               snapPicture();
     public static void snapPicture()
          final FrameGrabbingControl fgc = (FrameGrabbingControl) player.getControl("javax.media.control.FrameGrabbingControl");
          buf = fgc.grabFrame(); // Convert it to an image
          btoi = new BufferToImage((VideoFormat) buf.getFormat());
          img = btoi.createImage(buf); // show the image
          imgpanel.setImage(img); // save image
          // saveJPG(img, "c:\\java\\Tomcat\\webapps\\loadimage\\main.jpg");
          i++;
          saveJPG(img, imagesDirectory + filePrefix + i + ".jpg");
     public static void saveJPG(final Image img, final String s)
          final BufferedImage bi = new BufferedImage(img.getWidth(null), img.getHeight(null), BufferedImage.TYPE_INT_RGB);
          final Graphics2D g2 = bi.createGraphics();
          g2.drawImage(img, null, null);
          FileOutputStream out = null;
          try
               out = new FileOutputStream(s);
          catch (final java.io.FileNotFoundException io)
               System.out.println("ERROR 2");
               System.out.println("File Not Found");
          final JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder(out);
          final JPEGEncodeParam param = encoder.getDefaultJPEGEncodeParam(bi);
          param.setQuality(0.5f, false);
          encoder.setJPEGEncodeParam(param);
          try
               encoder.encode(bi);
               out.close();
          catch (final java.io.IOException io)
               System.out.println("ERROR 3");
               System.out.println("IOException");
     public void start()
          if (capThread == null)
               capThread = new Thread(this, "Capture Thread");
               capThread.start();
     public Image getFrameImage()
          // Grab a frame
          final FrameGrabbingControl fgc = (FrameGrabbingControl)
          player.getControl("javax.media.control.FrameGrabbingControl");
          buf = fgc.grabFrame();
          // Convert it to an image
          btoi = new BufferToImage((VideoFormat)buf.getFormat());
          return btoi.createImage(buf);
     public void run()
          try
//               Image img = getFrameImage();
               System.out.println("SNAPPER");
               //do something with the image here
               snapPicture();
               Thread.sleep(1000);
          catch (final InterruptedException iex)
               System.out.println("ERROR 5");
} Edited by: DeX on Mar 21, 2008 3:28 PM

You probably have manually installed JMF on the other system, and you have not placed JMF native system libraries in OS Path.
On Windows place the dll libraries found in JMFHOME\lib\*.dll in Windows System32 dir

JDBC with CLOB abnomally - shows on one server, not the other

Hi have a problem.
I recently moved a web application to another server. I copied over all the same java libraries I had on the first server.
The web application queries an Oracle table - the table contains one CLOB field.
When I query the table on the first server, I can see the contents of the CLOB.
When I query the table with the other server, the query is empty for the CLOB field.
This is the code I use to query the table. I have connection pooling set up within Sun Web Server. If it works on the one server, why would it not work with the other server? This is driving me crazy!!
Any suggestions?
try{
            // Get connection from configured pool
            initContext = new InitialContext();
            source = (DataSource) initContext.lookup("java:comp/env/jdbc/myDB");
            conn = source.getConnection();
            if(conn != null){
                stmt = conn.createStatement();
                result = stmt.executeQuery(sql);
                rsmd = result.getMetaData();
                while(result.next()){
                    Hashtable hash = new Hashtable();
                    for(int i = 1; i <= rsmd.getColumnCount(); i++){
                        if(result.getString(i) != null){
                            hash.put(rsmd.getColumnName(i),result.getString(i));
                        }else{
                            hash.put(rsmd.getColumnName(i),"");
                    returnValue.addElement(hash);
        }catch (Exception e){
            setErrors(e.toString());
            Email.sendMail("[email protected],"subject","Exception: " + e.toString() + "\nWith: " + sql,"fromname");
        }

I tried that with this code:
<body>
          <h1>
               JSP Example
          </h1>
          <%
          Connection dbconn=null;
          ResultSet results=null;
          PreparedStatement sql=null;
          try{
               Class.forName("oracle.jdbc.OracleDriver");
               try{
                    boolean     doneheading = false;
                    dbconn = DriverManager.getConnection("jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=host.com) (PORT=1521))(CONNECT_DATA=(SERVICE_NAME=theserver.com)))","username", "password");
                    sql = dbconn.prepareStatement("SELECT * FROM BE_STATUS_EMAILS WHERE ID='42575'");
                    results = sql.executeQuery();
                    while(results.next()){
                         if(!doneheading){
                              out.println("<table border=2>");
                              doneheading = true;
                         out.println("<tr><td>" + results.getString("ID"));
                         out.println("<td>" + results.getString("RECEIVED"));
                         out.println("<td>" + results.getString("TYPE1"));
                         out.println("<td>" + results.getString("FROM1"));
                         out.println("<td>" + results.getString("TO1"));
                         out.println("<td>" + results.getString("CC"));
                         out.println("<td>" + results.getString("SUBJECT"));
                         out.println("<td>" + results.getString("MESSAGE"));
                         out.println("<td>" + results.getString("STATUS"));
                    if(doneheading){
                         out.println("</table>");
                    }else{
                         out.println("No results");
               }catch (SQLException s){
                    out.println("SQL Error<br>");
               }finally{
                    if(dbconn!=null)dbconn.close();
          }catch (ClassNotFoundException err){
               out.println("Class loading error");
          %>
     </body>It produced the output, but again, the CLOB field was null. But when I query the database with that SQL using a database query tool, like Aquastudio, I can see the output. And if I run the stub on the other server, it works! This is nuts!!
Any suggestions?

Importing From Min-DV Camcorder: Sound on One Clip, not the Other

Similar Messages

Maybe you are looking for