Importing GPX file into BlackStar issue

This is similar to the Cacheberry issue mentioned elsewhere. I can download the file onto my device just fine. However, I can't get it imported into BlackStar, it counts down from 100%, then just hangs. Have worked with, and received outstanding help from BlackStar, but seems to be isolated problem. Anyone have any ideas? SD card issue?
Thanks

I strongly advise against using MPEG audio files in Encore.
Instead, use an uncompressed WAV or AIF file, and then let Encore transcode it to AC3, which is universally supported by all DVD players (some players can't playback MPA streams). Don't recompress the MPA to AC3 in Encore as MPEG-1 Level 2 compression in MPA is already lossy, and recompressing to AC3 will involve further lossy compression.
If you have a good AC3 encoder, you could also use an AC3 stream in Encore.
But avoid MPEG audio - if not for the reason of the trouble your seeing, then for player compatibility.

Similar Messages

Importing vcf files into Outlook issue

I have exported some PALM contacts as .vcf files and now I am trying to import them into Outlook. In PALM, I have the business number listed as Main so Outlook doesn't import the number into the business field.
How do I configure Outlook so that it recognizes this as the business number?
Thanks.
Post relates to: Palm IIIx

I suspect you will need to edit the files, because Outlook's import function does not let you map custom fields when you choose .vcf import. (If the following is too much of a pain, consider exporting in a tabular format such as comma-separated or tab-separated. You can open that file in Excel or a text editor to remove the records you do not want to import into Outlook.)
Can you open one of the .vcf files in Notepad or Wordpad and confirm that the "Main" number is on a line that starts with the following:
TEL;PREF:
If so, then you can use a VBScript to change that to:
TEL;WORK:
so that Outlook will interpret it as a Business number.
I have posted the script file at the following address:
http://jeffersonscher.com/res/MainToBusiness_vbs.txt
The one-time setup is as follows: After inspecting the file to confirm that it doesn't do anything dangerous, you will need to save it to your hard drive with a .vbs extension. Once it is saved in a convenient location, right-click it and create a shortcut. Then move that shortcut into your Send To folder:
c:\documents and settings\username\SendTo
Setup is done. You now can edit the Palm .vcf files by right-clicking, choosing Send To, then the name of your SendTo shortcut. The edited file will appear in the same folder as your .vcf file, with "_edited" added into the original name.
Hope this helps.
Post relates to: Treo 800w (Sprint)

Importing Photoshop files into premiere pro CS6 issues

Hi
I recently re-installed Premiere Pro CS6 on my work computer (i changed from a HDD to an SSD). Ever since I did this I am having an issue importing .PSD files into Premiere.
I try and import a photoshop file. The importer window comes up. The progress bar starts to move, then pauses and the Importer says 'Not Responding'. After a few seconds it comes back and throws up the following error:
Error message - 'The importer reported a generic error'
All projects i previously worked on that had .PSD files in them are now reporting these files as 'Media Offline' meaning I have to replace them with .PNG files which is really annoying.
Any ideas what might be happening? The files I am trying to import are RGB .PSD's. They worked previously without any issues.
I have Premiere Pro Version 6.0.5 (001 (MC: 264587))
running on a Windows 7 machine with Service Pack 1, 64 bit OS, 16GB Ram and Intel Core i7-2600
Many thanks in advance for anyone who can help me with this!

Yes, MXF should play perfectly in PP CS6, but if you can't work this out at this point, you may wrap your MXF video to something intermediate. as a matter of face, Adobe Premiere Pro CS6 seems to work fine if you import your MXF clips directly from a camera or camcorder, but if have already copied MXF recordings your HDD or you downloaded them from somewhere else, the import error may occur.
So i suggest you convert the MXF footage to something mezzanine we would recommend DNxHD.mov (if you are on a PC) or Apple ProRes .mov (if on a mac). those two intermediate codecs are good mezzanine codecs that handle recompression well and standup well in other areas of post-production (color grading, graphics, compositing, etc,). You can see what I wrote about the solution. "Why Premiere Pro CS6 can't import MXF files?" i hope that it is helpful to you.

Anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Urgent please
anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Sounds like the folder Write permissions issue described here with a solution:
"Some import operations were not performed" from camera import

How can I import a file into my Windows Phone 8.1RT App?

Hi All,
I'm running into a bit of an issue associating my app with a custom file type. Users create a file using my app and upload it to their OneDrive for sharing. So I then want to give the users the ability to download the file from a share link and
have that file open automatically in my app. I've got the appropriate declarations set and file type associations, but I'm getting a file access exception when I try to open the file. Whats the best way to import a file into my app? Here's
the code I've got so far:
protected override async void OnFileActivated(FileActivatedEventArgs args)
var path = args.Files[0].Path;
var name = args.Files[0].Name;
StorageFile newFile = await StorageFile.GetFileFromPathAsync(path);
await newFile.CopyAsync(ApplicationData.Current.LocalFolder, name.Substring(0, name.Length - 4));
The path comes back as
C:\Data\Users\DefApps\APPDATA\Local\Packages\microsoft.microsoftskydrive_8weke\LocalState\OpenWithTempFolder\e68c261-db3b-472d-a8b7-93427450\File Name.extension
and the exception is
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Clearly I'm trying to access the file in an inappropriate way, so what's the best way to get the file into my app's local storage?

You have the StorageFile in arg.Files[0] already. Just use that rather than getting its path and then trying to create a new StorageFile from it.
var path = args.Files[0].Path; // <= Path is unnecessary and unhelpful
var name = args.Files[0].Name;
await args.Files[0].CopyAsync(ApplicationData.Current.LocalFolder, name.Substring(0, name.Length - 4));
See my blog entry Skip the path: stick to the StorageFile for more details.

Getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

Without knowing anything about your system, your image file, your working document and so on nobody can even begin to guess. The file could be damaged, there could be color management issues at play and what have you...
Mylenium

Importing AAF files into Logic Pro 7.1

Hello All:
Have got a number of song sequences that are in the AAF format, complete with associated audio .aif sound files in the same folder.
These AAF files were created on another Logic pro studio, as they had to export them from Pro Tools into AAF .
i am able to IMPORT the sequence arrange with requisite tracks set up, but when the audio files attempt to load, i am prompted by the finder to MANUALLY locate each audio file to enable it to place into the Logic arrange page correctly.
I get the "where is the file"xxxxxB4Wrww.aif" type message, and can see the actual file located in the finder window, but it won't just locate them automatically.
It takes a loooong time to search out in the list each file and then click DONE to enter it!
Then repeat for EACH file name.....jeez.
One song has 78 audio files associated with it!
A local tech guy in a MAC software dealership said this was a continuing problem he had also with AAF in Logic 7.....
Any hints, before i spend 4 mind numbing hours hand-locating
these frikkin files?
Thank you in advance!

sonidox wrote:
Hi All,
I've recently been having problems importing MP3 files into the arrange window. I thought I changed a setting and can't figure out what's up? Also I haven't been able to change my sampling rate to 48K or more. Mind you, I'm in transition right now moving to a different continent and my external drive is stored away so I'm playing and importing from my OS drive.Is that the issue??
Thanks,
Francisco
Hi Francisco.
Please re-post this as a NEW question. I just went over my last few posts, and here you are, and NO ONE has answered your question in three days. That is not usually the case in this forum.
Cheers
PS please give some details, what actually happens with the mp3 files? what is the actual problem? And also, what sound card / interface are you using?

Importing excel file into OBIEE 10.1.3.4

Hi,
I am trying to import excel file into OBIEE and would like to use it as a data source. Fro this, I have already created an excel file (using MS excel 2007) with some sample data and named the data ranges with in the excel sheet as well. and I have placed that file under C:\ drive directly. And then created DSN and made sure that it points to the excel file.
When I go to Administration tool -> Import from Database -> seelct ODBS 3.5 and selected my DSN and clicked OK. Here I have not provided the user name and password (though I have provided the username/pwd as Administrator it is not taking).
when I click ok, it is throwing the following error :
nQSerror:16001 ODBC error state : IM006 code: 0 message: [Microsoft][ODBCDriver Manager] Driver's SQLSetConnectAttr failed. [nQSError: 16001]ODBC error state: S1000 code - 5015 message: [Microsoft][ODBC Excel Driver] External table is not in the expected format
Pls help me in rectifying this error. Many thanks in advance.
Thanks
Edited by: 858747 on 25-Aug-2011 05:47
Edited by: 858747 on 25-Aug-2011 05:48

Hi, I am facing the same issue.
I am using OBIEE 11g with MS Excel 2007 file as source. I have created ODBC Driver by selecting Microsoft excel driver.
NQSAdminTool.log gives error:
ODBC error state: S1000 code: -5015 message: [Microsoft][ODBC Excel Driver] External table is not in the expected format
The Admin tool gives error: "Unable to connect database using connection pool", when I try to 'update row count' in Physical Layer.
Any quick resolution to this?
Many thanks in advance.
Edited by: user1603699 on 25-Oct-2011 09:28

Adobe Technical Communications Suite - Importing Framemaker Files into Robohelp

We have just started using the Adobe Technical Communications
Suite to import our Framemaker files into Robohelp. (We have about
a year’s experience of taking Framemaker files into Web Works
Publisher, with good results so we were hoping for a similar
experience with Robohelp).
Please can you help us with the following two problems:
1. Importing FM files into Robohelp has posed some immediate
table formatting problems. We imported the FM files by reference
according to the instructions but cannot format the tables, ie.
Colors etc.
2. Can you also tell us if there is a way to set up our
graphics in Framemaker to import into Robohelp without first having
to run them through a batch file scenario to change the size for
online help. Also, can you explain why the imported graphics are
being put into separate folders in Robohelp – is there a
system option where we can stop this from occurring.
We are a little frustrated because we are long-time users of
Robohelp and Framemaker and are finding some of the new features of
TCS are not as helpful as we first thought. I am sending these
questions after spending several hours going through the Robohelp
Help and the Adobe website and not finding the answers.
Thanks for your help,
Asra S.

I have purchased the Technical Communications Suite and am
working with it now. I am finding several short comings in the
product – 60% great product and 40% not so great. I have been
using FrameMaker and RoboHelp for about 11 years and also I am a
Webworks (ePublisher) user. I was expecting (at a minimum) to have
the same functionality as ePublisher in TCS - ePublisher works
seamlessly with FrameMaker. Quadralay worked with me the first
month to answer my questions to ensure I was pleased with the
product - and welcomed/appreciated my feedback. In some cases they
provided me with scripts to accommodate my needs. I am finding on
message boards and forums that a lot of users as very disappointed
with your product so far. Are there any plans on
improving/enhancing the product to accommodate our basic requests?
The standard answer we get concerning graphics and tables is
to use conditional text. This is not single-sourcing and is a
horrible recommended work-around – a hack if you will. We use
conditional text to handle differences in program functionality. I
understand there is some set up required when you create a new
project in RoboHelp, but after that I would like to run the Batch
File process to simply generate my newly updated FM files to online
help. How efficient is that? VERY!
I have provided a list of the basic missing
functionality/oversights that would greatly improve the product and
satisfy a lot of your current users. Some of these issues may be
user misunderstanding and in that case I seek guidance on what
I’m doing wrong. Take the other issues into consideration
because these are not just my issues, but a TON of your users.
Hopefully you are user focused and are as concerned as we are.
Please welcome this feedback as a way to improve the product.
- No Breadcrumbs supported with MS HTML Help - supported in
your other outputs and is available in ePublisher, so it must be
possible.
- Table formats are not configurable – why? Sometimes
the converted table format from FM isn’t 100%.
- Imported file structure (folder for each chapter) totally
hoses my fix to poor graphic rendering. Currently I use a batch
file to run a Photoshop macro/action on my graphic source files to
reduce the file size by 50% and sharpen. I replace the graphics
with my graphics and they look marvelous in online help. I copy my
source graphics back into my “graphics folder” imported
into FM at 260 dpi for my printed docs. Can we have the option on
the structure for imported FM files to put them all into one
folder?
- Text entered into the Auto numbering field is not converted
when importing by reference. It is when just doing a straight
import. This is used for standardizing my inserted tables with
pre-populated column titles– Troubleshooting, If/Then, etc.
- Too many CSS issues. It would be nice to have one main
template that we can sync to when the master template is changed.
- Can’t specify a default template to apply to all FM
files when imported.
- My output .chm file is not picking up my Project Settings.
It will not display Favorites, My Window Size, it’s not
showing the TOC.
- Cross-references – sometimes they work and sometimes
they don’t.
- Markers – we use markers for glossary terms and the
character tagging carries forward throughout the rest of the
sentence.
I started testing the product four days ago and these are the
major issues that are keeping me from moving forward with my
overall plan to move to structured FM. I’m now between a rock
and a hard place because now my department does not have the
software to do their job. Do I go to management and tell them that
I made the wrong decision in my tool selection? I choose your TCS
over the updated Quadralay ePublisher that works with FM8…
Maybe they went up on their price because the knew their former
users would come back and be willing to pay the increased price for
their software that generates online help with just a click of a
button.
Thank you for taking the time to read this and for your help
in advance. Please direct these concerns to those in charge of
enhancing the product (Product Evangelist). A reply and technical
support is greatly appreciated.
Director of Technical Publications - Horizon Software
International, LLC
Nikki Bridwell

I need to know how best to import .mod files into elements 7

I need to know how best to import .mod files into elements 7

lornamarieslade
Are you working with .mod standard or widescreen?
If .mod standard, less problematic. The file just might import without issue. Worst case would probably be changing the file extension from .mod to .mpg just prior to import.
Now .mod widescreen is another story that revolves around maintaining the 16:9 flag that scretches the video for display after encoding. Some have said that the 16:9 flag is lost in the transfer to computer; some say certain editors such as Premiere Elements just cannot read/recognize the flag. Whatever the case this is what you should consider in your Premiere Elements 7 Windows.
a. If you need to rename the file extension from .mod to .mpg, do so prior to import.
b. Import the .mod or .mpg counterpart into your Premiere Elements 7 project using the project preset NTSC or PAL DV Widescreen (NTSC or PAL depends on your location of interest). You will probably see that the video does not fill the space in the Edit Mode Monitor (you will probably see standard 4:3 looking image rather than widescreen 16:9 looking image).
c. Right click the file in the Project media area, select Interpret Footage, and, in the Interpret Footage Dialog/Pixel Aspect Ratio section, dot the Conform To: and change the setting to
D1/DV NTSC Widescreen 16:9 (1.2)
or
D1/DV PAL Widescreen 16:9 (1.422)
depending on your location of interest.
A while back there used to be a program called SD Copy that did the job of file name change and adding the 16:9 flag prior to import of the .mod widescreen into Premiere Elements. But, I have lost track of the SD Copy and suspect that is it no longer available. I have dealt with this issue many times at a forum that I formerly frequent. Most have reported back that this workaround worked for them. It is worth a try. I am looking forward to your results.
If you do opt to upgrade to Premiere Elements 11 Windows (please go tryout before purchase), I am eager to learn how your .mod widescreen is handled by version 11 in your computer environment.
Thanks.
ATR
Add On...I just came across this download for SDCopy. It does not give the appearance of the original the link to which is broken. I have not downloaded and used the following since I do not have any .mod widescreen. So, no guarantees. Please let us know the outcome if you try it if Interpret Footage does not work for you.
http://paulmcgrath.net/download.php?view.8

How to Import XML file into SAP B1

Dear All,
I have a scenario like,
I am receiving a XML file from a 3rd party application for the daily Creation,Update of Item Master,BP Master, Marketing Documents. I want to import this file into SAP B1 through its approp objects. I understand DTW has limitation in its file types (Semicolo,Tab,Comma,ODBC). How do i do this ? Please guide me.
Thanks,
Thanga Raj K

Hy folks,
I´m frim Brasil and I've been studying the tool EFM (Eletronic File Manager) to learn more about it!
There I saw that we can extract to XML "any" infomation from the database we want, mainly through the GEP.
However, as I've seen, this Add-On can not import any XML file into SBO, unless for the BFP wich can be imported in conjunction with the BTHF Add-on.
So I ask: how is it possible to import XML data into SBO database? Is it possible to be done through the EFM? or it´s really necessary to write a code specifically to do that?
Besides, I know that de B1iSN fit to this necessity... but when I tried to use it, by the custom "object" for BP, for example, there are some data wich the mapping conteined in this custom "process" that can not be imported... I tried to understand how to map those other fields not imported by the custom but this has been dificult to me as I am a implementation consultant focused in administrative process not on development...
Could you please help me with this subject!
Thanks a lot,
Denis

Problem importing ics files into iCal

Importing ics files into iCal is the problem, but first here is the background on why I'm trying to import.
I have an iMac and iPad, and recently changed my iPhone 3G for an iPhone 4S. Having got the iPhone 4S I have now set up all my devices to use iCloud. In moving iCal to iCloud an extra calendar was created "automatically" in iCal, called "Me". This "Me" calendar contains a partial duplicate of my main calendar, which is called "My Calendar". In fact, some of the events from "My Calendar" seem to have been moved to "Me", and some have been duplicated.
It seems as it I now need to merge the "Me" and "My calendar" calendars to get back to where I was.
I have tried to export one of the calendars and then re-import it into the other. The export seems to work fine, but every single time I try to re-import the ics file iCal crashes at the end of the import process, and the import is not completed.
Can anyone help? This has been driving me absolutely crazy today!
I even tried manually moving events from one calendar to another, but they reappeared. I think this was because my iPhone/iPad were re-syncing via iCloud and overwriting the changes I had just made.
I don't mind if I end up with one calendar with duplicates as I can remove them with iCal Dupe Deleter.
Or if there are any other alternative solutions I'd love to hear them!
All help greatly appreciated!
(P.S. Is it just me, or is Apple software slowly getting as unreliable as Windows used to be? I get more problems with software updates now than when I first got a Mac about 8 years ago!)

Not a great answer but I dragged the attachment either to the finder - app - ical or the icon. It placed it on the calendar. I clicked in and accepted. So, no auto populate. Need to drag and drop. So glad I paid the 20 bucks to upgrade to 10.8

Is there a way to import Raw files into LR catalog ..including..any edits performed in an external raw file editor such as Capture One?

Is there a way to import Raw files into LR catalog ..including..any edits performed in an external raw file editor such as Capture One?
I can import the Raw file successfully but cannot see any edits that were applied in Capture One. Im assuming no but just checking.

Your assumption is correct, Capture One, Lightroom and other third party raw processors have their own proprietary processes and profiles for rendering the raw data.
They do not make permanent changes to the raw data and store the changes to an .xmp file or to a catalog file like Lightroom.

Looking for a Notes app that I can import CSV files into?

As the title says, I'm looking for a good notes application for my iPhone that I can import CSV files into. I have tried both Appigo and Notespark, but I can't easily scroll through them, as I have 2,000+ notes. Is there any app that I can import my notes into and also scroll through quickly? I'd like something that works similarly to how you scroll through songs on the iPhone/iTouch, with the column on the right where you can skip to songs (notes, in this case) that start with a certain letter.
Thanks!

Hi Tx Tar Heel,
I've been using Office2HD: https://itunes.apple.com/us/app/office2-hd/id364361728?mt=8
Its cheaper than Numbers and it also works for Word and PowerPoint files too. I like the Dropbox integration. I can start on my Office docs (Word, Excel, PowerPoint) in the office and then edit those files with Office2HD when I'm out of the office. Files saves right back to Dropbox so that when I get back to the office the files are already updated. Not bad for a $7.99 app!
Hope this helps!
~Joe

Error while importing tpz file into XI Design

Hi All,
When i am trying to import latest exported tpz file from Dev system into Q system i am getting below error.
Also the tpz file i am importing , with same file name already i have imported earlier into Q system through other Dev system. Now i am importing the exported file through prod fix environment dev system. Please help me , how to import the file without this error. Also, how to avaoid duplicate file name for importing tpz files or overwrite exiting imported tpz file which is having same file name.
Batch rolled back. Caused by java.sql.BatchUpdateException: ORA-00001: unique constraint (SAPSR3DB.SYS_C00136623) violated at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:343) at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10698) at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeBatch(BasicPreparedStatement.java:263) at com.sap.sql.jdbc.oracle.Oracle10gPreparedStatement.executeBatch(Oracle10gPreparedStatement.java:100) at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1129) at com.sap.sql.jdbc.common.CommonPreparedStatement.executeBatch(CommonPreparedStatement.java:991) at com.sap.engine.services.dbpool.wrappers.StatementWrapper.executeBatch(StatementWrapper.java:270) at com.tssap.dtr.pvc.basics.transaction.StatementReleasingConnection.executeBatch(StatementReleasingConnection.java:297) at com.tssap.dtr.pvc.versionmg.DefaultIntegrator.fireSQLBatches(DefaultIntegrator.java:1072) at com.tssap.dtr.pvc.versionmg.DefaultIntegrator.executeDBUpdates(DefaultIntegrator.java:384) at com.tssap.dtr.pvc.versionmg.DefaultIntegrator.integrate(DefaultIntegrator.java:337) at com.tssap.dtr.pvc.versionmg.VersionSet.integrate(VersionSet.java:183) at com.sap.aii.ib.server.pvcadapt.ImmutableVersionSet.integrate(ImmutableVersionSet.java:197) at com.sap.aii.ib.server.versioning.integration.VersionSetIntegratorImpl._integrateUnconditionally(VersionSetIntegratorImpl.java:300) at com.sap.aii.ib.server.versioning.integration.VersionSetIntegratorImpl.integrateClosedVersionSet(VersionSetIntegratorImpl.java:119) at com.sap.aii.ib.server.versioning.integration.VersionSetIntegrator.integrateClosedVersionSet(VersionSetIntegrator.java:52) at com.sap.aii.ib.server.propagation.PropagatorImpl.integrateObjectVersions(PropagatorImpl.java:261) at com.sap.aii.ib.server.propagation.Propagator.integrateObjectVersions(Propagator.java:174) at com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcIntegrate(PvcTransport.java:191) at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.integrateVersionset(InternalTransportServiceImpl.java:480) at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.autoIntegrate(InternalRepTransportServiceImpl.java:546) at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:716) at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importFromImportSource(InternalTransportServiceImpl.java:362) at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importFromImportSource(TransportServiceImpl.java:151) at com.sap.aii.ib.sbeans.transport.TransportServiceBean.importFromImportSource(TransportServiceBean.java:75) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0.importFromImportSource(TransportServiceRemoteObjectImpl1_0.java:730) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0p4_Skel.dispatch(TransportServiceRemoteObjectImpl1_0p4_Skel.java:100) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanks in advance.
Rajesh
Edited by: rajesh amrabad on Sep 11, 2008 10:35 PM

In addition to abobe answers,
Keep this .tpz file at below mentioned location
\usr\sap\<SID>\SYS\global\xi\repository_server\import\XI7_0_SAP_BASIS_7.00_09_00.tpz
then login to the IR and peoceed as Tools -
> import design objects. Her you will get this .tpz file, just import it.
follow the steps given in this link and check if you are doing the correct thing.
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
The steps that you require are listed below,
1) You must have the role SAP_XI_ADMINISTRATOR or SAP_XI_CONTENT_ORGANIZER to be able to export and import XI content.
2)You import the XI content by first copying the provided export files into an import directory on the host of the Integration Builder and then importing the files into the Integration Repository.
3)Copy the export files into the import directory for the Integration Repository (<systemDir>\xi\repository_server\import).If the files are packed, you must unpack them before importing.The actual export files have the extension .tpz. You must not unpack these files.
4)The import directory is created the first time you call the Integration Builder.
5)Start the Integration Builder and call the Integration Repository.
To do this, perform the following steps:
a. Log on to the SAP system on which your Integration Builder has been installed.
b. Open the Integration Builder start page by calling it either from your user menu or with Transaction SXMB_IFR.
c. Choose Integration Repository.
Choose Tools u00AE Import design objects to import the XI content.
6)Only the files from the import directory are offered to be imported. The sequence in which
you import the export files is not important.
7)After a successful import, the Integration Builder moves the imported TPZ files into the directory <systemDir>/xi/repository_server/importedFiles. The support package stack of imported software component versions is displayed on the Details tab page for the relevant software component version in the Integration Builder. If an error occurs, this information is important for support.
Hope i have been of some help.

Importing GPX file into BlackStar issue

Similar Messages

Maybe you are looking for