Importing HD for non-HD timeline... downconverting?

Question:
I have to shoot an event where the lead camera will be shooting HD.
The secondary camera will be SD.
I will then be editing the two tapes together on a SD timeline.
I use Final Cut Studio (1 not 2).
What would be the best approach?
Should I capture the HD footage as HD and then place onto SD timeline?
Will I be required to render a bunch of footage if I do that?
Is there a way to just import the HD footage as SD footage?
my deck is a Sony HVR-M15U

What would be the best approach?
Throw yourself off a bridge now.
Lacking the integrity to do yourself in, simply capture the HDV (most likely what you mean by HD) as SD 16:9 anamorphic using the downconvert feature of most HDV cams and work from there. Make sure you shoot the SD as 16:9 anamorphic. Be prepared for a nightmare in color correction.
x

Similar Messages

How to import Province for NON US Leads?

I couldn't find a separte Province Field on the Lead wsdl instead it only has oneState/Province field.
We have both US and NON USA Leds which needs to be imported. I'm mapping the USA Address to State/Province field. But I dont know which field to be mapped for Province. Also, if I try to import address for a NON USA Country, it throws a picklist mismatch error stating State values doesn't match as it is verifying against the State field, which would only allow the valid USA Sate Codes.
Please advice.

Hi Danpiel and welcome to Apple Discussions,
Try on ebay. Click this link to ebay.co.uk
http://www.ebay.co.uk/sch/Software-/18793/i.html?_nkw=snow+leopard&_catref=1&_tr ksid=p3286.c0.m1538
As Latvia is in the European Union you should find a seller that will mail to you.
Good luck,
Alan

Import po for non valuated material

hi sap guru's
my client have one import po in that po material is non valuated at the time of MIRO for posting cvd ,custom, that time system not posting cvd,custom to approprit account (zcv account) they showing only vendor account
and client want to post cvd ,custom to zcv account how i can configure this senario
Thanks

Hi,
You can try following
1) Do not create Non valuated PO, enter price as atleast 1$ or any currency so that you can maintain Customs conditions, then at the time of MIRO change the Customs Duty as per BOE.
2) If you want to have Non Valuated PO only, then post Customs duties thru FB60 (Finance JV) and take Excise credit thru J1IH.
Regards,
Vikas Mayekar

Fixing import error for non compilation CDs

I've noticed that iTunes imports some CDs into the Compilations folder on XP when they are not compliation CDs. Does anybody know the procedure for moving these to the correct folder under the artists name ?

All you have to do is first, in iTUnes, Goto goto edit>preferences>advanced>general and make sure "Keep Itunes Music organized" is checked. Then goto the main Library. Now in the top right corner, in the search field type the name of the album thats incorrectly in the "Compilation" folder. you will now only see a list of tracks on that album.
Select the first track, hold down the shift key, then select the last track. this will highlight all of the tracks. Rightclick and hit "Get Info". In the section "Part of a Compilation" near the bottom, change it to No. iTunes will now move the folder under the correct artist.
Next time you import a CD just use the same method of highlighting all tracks, selecting "Get Info" and making sure its not saying "Yes" to non compilation CDs

Import prompt for non existent device

Every time I launch LR 2.2, if prompts me to import from my iPod Touch, which is not connected to the computer. It displays one blank image. How can I stop this from happening? When I plug in my compact flash card, I do want it to bring up the import dialog, which it does correctly.

Claude-
Import the bogus image, then delete it, that is, if you can import it, whatever "it" is.
I'd like to not have my iPhone come up for prompting, as it does have images on it that I don't care to import.

Importance of Profit centre filed for non valuated material

Importance of Profit centre filed for non valuated material material master

Hi
Profit center field in case of non valuated material is useful, only if your consumption a/c is not a cost element. In this case, it takes PC from mat master
Else, if takes PC from the CO object in which the GR is accounted.
However, your screen layout in MM might have defined PC as a mandatory field in MM01.. For this, you need to contact your MM consultant
Ajay M

Can Jdeveloper Be Used For Non-Oracle Databases

I have been trying to evaluate Jdeveloper 9i and Jbuilder 7 Enterprise for Swing database development. I am particularly interested in the productivity enhancements such as BC4J and Jclient. The underlying database might be Oracle, SapDb (excellent, easy to use, and free), SQLServer, etc.
I evaluated Jbuilder Enterprise tools and it worked flawlessly with SapDb. This emphasized using their DataExpress and DbSwing components which provide many useful capabilities similar to BC4j and Jclient. It also involved using their DBPilot tool which allows browsing similar to that provided via a Jdeveloper connection.
I tried to use Jdeveloper for the same SapDB and it is essentially non-functional. I followed the instructions for using a non-default driver and tried to define a connection. It behaved inconsistently: often saying no suitable driver can be found and yet when you edit the connection and test without making any changes, it works. If you try to establish a BC4J definition, it is very inconsistent and fails to recognize important details as foreign keys. Even if you define a ViewLink manually, it still does not work properly if you attempt to define a Master-Detail Jclient form. As I have stated, all these types of capabilities worked flawlessly in their Jbuilder equivalent. Furthermore, I really like the fact that Jbuilder gives many of BC4Js benefits without needing a BC4J J2EE container.
Has anyone had real success using Jdeveloper's advanced features to develop for non-Oracle databases and if so, how did you get around these types of problems?

Hi,
generally, SCAN can be used for 10g databases and you discovered the first half: for 10g databases you will have to modify the REMOTE_LISTENER entry for each 10g database instance to point to the SCAN listeners (as opposed to pointing to the remote local listeners, which is the default in 10g). You could even have the databases registers themselves with SCAN and the remote listeners, if you wanted to... It's more or less a matter of configuration. But for simplification reasons, I will stick to the case where you have your 10g databases register with the SCAN listeners only.
Now the other half is the client and the client configuration. An 11g Rel. 2 client configured for RAC would have a TNSNAMES entry that has only one address line for the RAC databases. The host entry in this one address line should point to the SCAN (the SCAN name is ideally resolved in DNS). A 10g client configured for RAC would have as many address lines in the TNSNAMES as you have nodes in the cluster.
The 10g client SCAN configuration would then be in the middle so to speak: You would have 3 address lines in your TNSNAMES, in which each host entry would resolve to one SCAN address (I assume you will use the recommended default of 3 SCAN IPs). If you choose, you can have a name resolution for each of your SCAN IPs, but this would not be required. Now, why would you do it this way? Because this configuration will always work and does not make you dependent on certain functionality that your DNS server may or may not offer.
For the remaining questions: SCAN is a DNS entry resolving one name to more than one (typically 3) IP addresses. OID is short for Oracle Internet Directory, which is a complete LDAP server. And you are right that there is no document how to configure 10g clients for SCAN from Oracle yet. However, there is a quite good document on SCAN on otn.oracle.com/rac, but I am sure you are aware of it already.
Hope that helps. Thanks,
Markus

Where can I buy a MacBook? Not Pro or Air. It has important meaning for me!

Where can I buy a MacBook? Not Pro or Air. It has important meaning for me!

Welcome to Apple Support Communities.
We're not "Apple" here, just users like yourself.
Are you seeking a new unit or refurbished?
Apple discontinued production and sales of new MacBooks to all but education sources during 2011.
And education sales were discontinued about 2 months ago:
http://www.tuaw.com/2012/02/08/white-macbook-reaches-end-of-life-education-sales -to-cease/
If you want a new MacBook, you might be able to find unsold units or demo units in stock at college stores or electronics retailers.
Refurbished MacBooks are still available occasionally through the Apple Store Refurbs. They are listed in the store when refurbished units are available, and are removed from the store when they sell out, often within a matter of a few hours: http://store.apple.com/us/browse/home/specialdeals/mac
At the moment I'm posting, there are none listed.
And there are a number of sources for used MacBooks that you can locate with any popular search engine. I purchased my refurbished MacBook directly from the Apple Store online several years ago.

PDF generation for Non English Characters from ADF

Hi
We are using below piece of code to generate pdf from ADF Managed bean. It works fine. However for non English Characters(eg. Japanese,Vietnamese,Arabic) it puts
I got few blogs
https://blogs.oracle.com/BIDeveloper/entry/non-english_characters_appears
However we are not using BI Publisher product . We are using its API's
Can anyone tell where do we need to setup fonts within ADF or Weblogic or Server ?
Input Parameters are
a)xml Data
b)InputStream ie rtf Template
import oracle.apps.xdo.XDOException;
import oracle.apps.xdo.template.FOProcessor;
import oracle.apps.xdo.template.RTFProcessor;
    public static byte[] genPdfRep(String pOutFileType,byte[] pXmlOut ,InputStream pTemplate)
        byte[] dataBytes = null;
        try {
            //Process RTF template to convert to XSL-FO format
            RTFProcessor rtfp = new RTFProcessor(pTemplate);
            ByteArrayOutputStream xslOutStream = new ByteArrayOutputStream();
            rtfp.setOutput(xslOutStream);
            rtfp.process();
            //Use XSL Template and Data from the VO to generate report and return the OutputStream of report
            ByteArrayInputStream xslInStream = new ByteArrayInputStream(xslOutStream.toByteArray());
            FOProcessor processor = new FOProcessor();
            ByteArrayInputStream dataStream = new ByteArrayInputStream((byte[])pXmlOut);
            processor.setData(dataStream);
            processor.setTemplate(xslInStream);
            ByteArrayOutputStream pdfOutStream = new ByteArrayOutputStream();
            processor.setOutput(pdfOutStream);
            byte outFileTypeByte = FOProcessor.FORMAT_PDF;
            processor.setOutputFormat(outFileTypeByte); //FOProcessor.FORMAT_HTML
            processor.generate();
            dataBytes = pdfOutStream.toByteArray();
        } catch (XDOException e) {
            e.printStackTrace();
        return dataBytes;
Appreciate your help.
Thanks,
Abhijit

Fonts are defined in the template you use to generate the pdf. Your application add the data and both is processed yb the FOP processor. Now there are two possible causes of the '???' :
1. the data you sent to the template contains the '???' already
2. the template can't digest the data (the special characters) and puts '???' in the pdf.
Before going on you have to find out which one is your problem. The 2nd is the problem you better ask this in a FOP forum as you have to solve it by changing the template.
Timo

Is Lightroom intentionally made difficult for non-English users?

Could it be that Lightroom is intentionally made difficult for the non-English user? I came to this forum today hoping to find an answer and all I see is problems when I try searching the forum, and complicated instructions on how to, supposdely, solve this issue. The issue I am facing has to do with localization, compatibility, interoperability and compliance. The problem is that I can't use many of the Lightroom shortcuts. Many of the ones that require the use of a modifier key on my keyboard just don't work. So what if I have a Swedish keyboard? Sweden is one of the most computer literate contries in the world, and Sweden has played a major role in the development of early computers and new technologies. Adobe has a presence in this country, and I'm quite sure Sweden is an important market for Adobe. So why not make Lightroom compatible with the Swedish keyboard? Why should I care to go through complicated instructions on how to hacktivate my keyboard by the means of editing config or script files? Why can't it just work out of the box?
I feel like this is intentional. Could it be that Lightroom users are only to be found in English speaking countries like USA, UK, New Zealand and Australia? I don't think so.
Swedish user:
http://forums.adobe.com/message/1459525#1459525
Swiss user:
http://forums.adobe.com/message/4375318#4375318
German user:
http://forums.adobe.com/message/3588746#3588746
http://forums.adobe.com/message/3817657#3817657
How about the ability to change keyboard shortcut bindings, i.e. custom shortcuts? I just found that this is not even possible in Lightroom! That explains why people take these strange measures and kludgy ways of making custom shortcuts in Lightroom. Changing shortcuts is often times tricky business because you have to change them in respect to other shortcuts. It's likely that one will have to change several keyboard shortcuts to avoid conflicts, etc. Lightroom needs a shortcut editor!
One should really not even have to change the default shortcuts, Adobe should choose some intelligent key combinations that make sense, and they should just work on any keyboard. I've tried changing the language from English to Swedish in Lightroom settings. The result of this is that nearly all shortcuts are changed to something else, so I would have to re-learn some of the shortcuts I have already learned using Lightroom in English, and of course this also changes the language of the interface which is not something I want. I will have to change my keyboard layout to English to make this work, or get a secondary keyboard, one with English layout. This is something I will only have to do when I work in Lightroom, because many of the professional programs that I use are working just fine with my keyboard. Perhaps Adobe can make the keyboard localization (shortcut maps) as an option, separate from the interface language setting? And for God sake integrate a keyboard shortcut editor for once!

Another Swiss user on Lightroom forums:
http://www.lightroomforums.net/showthread.php?6867-Flippy-Key-Using-Lightroom-in-english-w ith-a-non-english-keyboard-layout
I ended up removing the Keyboard Tamer plugin and then manually adding following strings to C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\en\TranslatedStrings.txt. This is by the way something that the Keyboard Tamer plugin does as well, because when I removed it I found two files named TranslatedStrings.txt in the Recycle Bin. The Keyboard Tamer is just supposed to save you the time and effort of manually manipulating these strings.
"$$$/AgLibrary/Menu/View/ZoomIn=Zoom In"
"$$$/AgLibrary/Menu/View/ZoomIn/Key=Cmd+."
"$$$/AgLibrary/Menu/View/ZoomInMinor=Slow Zoom In"
"$$$/AgLibrary/Menu/View/ZoomInMinor/Key=Cmd+Shift+."
"$$$/AgLibrary/Menu/View/ZoomOut=Zoom Out"
"$$$/AgLibrary/Menu/View/ZoomOut/Key=Cmd+-"
"$$$/AgLibrary/Menu/View/ZoomOutMinor=Slow Zoom Out"
"$$$/AgLibrary/Menu/View/ZoomOutMinor/Key=Cmd+Shift+-"
I found this thread helpful:
http://forums.adobe.com/message/1459525#1459525#1459525
I just replaced AgDevelop with AgLibrary. This of course only changes the key binding for Zoom In and Zoom Out in the Library module. Is there perhaps a document somewhere that explains the structure of the TranslatedStrings.txt file? There seems to be one of these files in each of the language specific folders under the Resources folder.
This file is known to be found in:
C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources>dir /b /s TranslatedStrings.txt
C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\de\TranslatedStrings.txt
C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\en\TranslatedStrings.txt
C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\es\TranslatedStrings.txt
C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\fr\TranslatedStrings.txt
C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\it\TranslatedStrings.txt
C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\ja\TranslatedStrings.txt
C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\ko\TranslatedStrings.txt
C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\nl\TranslatedStrings.txt
C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\pt\TranslatedStrings.txt
C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\sv\TranslatedStrings.txt
C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\zh_cn\TranslatedStrings.txt
C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\zh_tw\TranslatedStrings.txt
I will study the structure of this file in Resources\sv\ and try to understand it. And as I find new "flaws" in the shortcut key bindings I will make new edits to the file I saved in Resources\en\ accordingly.
Here's an idea: those of you who don't mind re-learning all the shortcuts - the localized shortcuts for Swedish keyboards - simply copy the TranslatedStrings.txt file from C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\sv\ and paste it in C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\en\. What this does it allows you to keep English as your interface language, but it changes the shortcut map to something that's more adopted for the Swedish keyboard layout. You get the same shortcut key bindings as the ones you see when you change the language to Swedish in the settings. But this way you are preventing Lightroom from changing the interface language.
Either that, or add new strings to an empty Resources\en\TranslatedStrings.txt file for each key binding you find to be broken and not compatible with your keyboard. This way you are only making changes to the key bindings that don't work very well for your keyboard, you are not chaning all of the shortcut key bindings. The other key bindings stay the same, the default key bindings found in the English version of Lightroom (or with English as language settings).
This is a way to adapt Lightroom for your own environment. But this is still too complicated and unncessary. A simple shortcut editor built into Lightroom would have solved this. But what are we going to do?... this is up to Adobe... Lightrooms have been complaining about the lack of a shortcut editor since at least Lightroom 2 and Adobe has not listened. So I don't expect to see this feature in the following years to come. It might just come along in maybe Lightroom version seven or something... but who cares?... At that time I might even ditch Lightroom altogether.
Ligthroom 5 upgrade...
I just found out that the new Lightroom 5 is not compatible with Windows Vista. I have the Vista Ultimate 64-bit on my desktop where I use Lightroom. This was not made very clear by Adobe. They simply state that Lightroom 5 works on Mac and on Windows. You have to read the fine print. I almost purchased the upgrade. I'm glad I didn't. I won't upgrade from Vista to Windows 7 just to run Lightroom 5! We, the early Windows Vista adapters, got screwed by Microsoft. Now, we are getting screwed by Adobe too! I see no reason not to support Windows Vista as it is pretty much the same system as Windows 7, and one would expect Adobe to support them both. I found a thread about it where one user asked why Vista was not supported and Adobe failed to give any explanation. They just silently dropped the OS support.
I guess they can do whatever they want. They are Adobe.
But I will not upgrade to Windows 7 because of Lightroom, so I won't upgrade to Lightroom 5. This is a great oppertunity for Phase One to strike with a good deal, such as a discounted migration upgrade for Capture One. I am sure many Lightroom 4 users would be happy to leave the Lightroom ship in favor of Capture One. At the end of life of Lightroom 4 I will probably just go to Capture One, even if I have to pay full price. At least they support Windows Vista.

Validation for Non-AlphaNumeric characters

Hi All,
I want to do Validation for Non-Alpha Numeric characters.
While saving record, Name should only allow alphanumeric(letters and numbers only) characters, No special characters.
How to do this?
Plz help
Thanks,
Sk

SK
In EOImpl file in setter method of Name you can write below logic
import java.util.regex.*;
public void setLastName(String value)
    Pattern p = Pattern.compile("[^a-zA-Z0-9]");
    Matcher m = p.matcher(value);
        if (m.find()){
            System.out.println("last Name"+value);
            throw new OAException("Special Characters Not allowed in Name", OAException.ERROR);
       setAttributeInternal(LASTNAME, value);
} Hope it helps!!!!
Thanks
AJ

Pagination support for non-Oracle databases?

Hi,
I just read this thread (Pagination Support on pagination support. Is there any way to get pagination with non-Oracle databases? We are using an IBM iSeries / AS/400 DB2 database right now, and we're planning to use some local lightweight database in the near future as well (probably Cloudscape/Derby or "IBM Everyplace database".)
We currently use code like this:
String sql = "SELECT art FROM Artikel art" +
            /* dynamically generated where statement is added here */
            + "ORDER BY art.artikelNummer";
Query q = em.createQuery(sql);
q.setFirstResult(firstResult);
q.setMaxResults(maxResults);If I look in the TopLink logs, I see queries like this:
SELECT ARTNR, ARALT, ARAFJ, ARXII, ARAVJ, ARXIV, ARANJ, AHGCD, ARNVJ, ARCRJ, ARARK, ARFKJ, ARTNK, ARGP1, ASGCD, ARGP2, ARPR1, ARGP3, ARPR2, AREX1, ARPR3, AREX2, ARPR4, AREX3, ARASA, ARINA, ASSCD, ARIA1, ARBAN, ARIN1, ARBAV, ARIA2, ARBAK, ARIN2, ARCES, ARIA3, ARCDT, ARIN3, ARCRE, ARIA4, ARCWK, ARIN4, ARHBH, ARIA5, ARDFA, ARIN5, ARDFG, ARIA6, ARDOS, ARIN6, AREPW, ARINN, ARFOD, ARIAS, ARFOE, ARINS, ARFOF, ARNAB, ARFOI, ARNIB, ARFON, ARNIA, ARFOS, ARNN1, ARFTA, ARNA2, ARVIV, ARNO2, ARGAP, ARNN3, ARGPT, ARNA4, ARGPD, ARNO4, ARGPA, ARNN5, ARGPO, ARNA6, ARHIS, ARNN6, ARISP, ARNIO, ARKHM, ARNNS, MAGCD, AROVJ, MTGCD, ARPL1, ARMXM, ARPL2, MRKCD, ARPL3, ARMVR, ARVKJ, ARMIM, ARV12, ARMDT, ARVVJ, ARMTE, AR#VR, ARMTU, ARZLS, ARMTM, ARIAT, ARMWK, ARAVS, MPCCD, ARNVS, ARBTW, ARFJS, ARXI2, ARG2S, ARXI3, ARE1S, ARXI4, ARE3S, ARXI6, ARIB1, ARXI1, ARIB2, ARXI5, ARIB3, AROPI, ARIB4, ARPRV, ARIB5, SZGCD, ARIB6, ARSPC, ARINO, ARSMF, ARIOS, VEAAN, ARNIS, ARSYN, ARNO1, ARVR1, ARNA3, ARV1S, ARNN4, ARVR2, ARNO5, ARV2S, ARNIN, ARVR3, ARNOS, ARV3S, ARP1S, ARTFA, ARP3S, ARTFG, ARS12, ARUVC, ARZLD, ARUCW, ARAJS, ARBKV, ARCJS, ARVVI, ARG3S, ARVVP, ARINB, VPOCD, ARIO2, VPECD, ARIO4, ARVIH, ARIO6, ARVHG, ARNBS, ARVRW, ARNN2, ARVPR, ARNA5, ARVVR, ARNAS, ARVVS, ARP2S, ARVV1, ARSVV, ARZK1, ARNJS, ARNA1, ARNO3, ARIO1, ARNO6, ARIO5, AROJS, ARE2S, ARVJS, ARIBS, ARIAD, ARIO3, ARG1S FROM ART WHERE ((((ARUVC = 'N') AND (ARHIS = 'N')) AND (ASGCD = 7)) AND (AHGCD = 15)) ORDER BY ARTNR ASC
(Yeah, I know we have too much columns in the table...)
So, no pagination in the query. As you can see, we have a mechanism in place to dynamically generate a where clause. This is because the user can set filters. The problem is, if our user sets a filter that causes the result set to be significantly smaller, the performance is way better than when he sets no filter at all. We suppose this is because the whole result set is sent to TopLink, regardless of the values of firstResult and maxResults.
We are using TopLink Essentials 2.1-10, by the way.
Message was edited by:
Bart Kummel

Hi all,
I'm trying to subclass <tt>DatabasePlatform</tt> to add pagination support for the AS/400 DB2 database of my customer. To be fair, it is not going very well so far.
The first problem is, the query Chris found by googling (Re: Pagination support for non-Oracle databases?), does not work for AS/400s version of DB2. In fact, although it is called "DB2", the database on the AS/400 system is a whole other database than the "normal" DB2 database that runs on Windows and *nix. The AS/400 DB2 simply does not have a "ROW_NEXT" function.
Another option would be to use the <b>row_number() over()</b> mehtod. But, as can be read here, this function is only available from version V5R4 of OS/400. And guess what? We're stuck on V5R3 at this client. (We cannot upgrade, because there's an application in use that's written in Delphi and IBM dropped the Delphi binding from V5R4...)
So I pretty much ran out of options. On the mailing list I linked to above, someone mentions the option to make a sort of stored procedure that generates a row count number. An example of how to do this can be found here. I implemented it, and ended up with this code:
package com.myclientsname.persistence;
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import org.eclipse.persistence.expressions.ExpressionBuilder;
import org.eclipse.persistence.internal.databaseaccess.DatabaseCall;
import org.eclipse.persistence.internal.expressions.ExpressionSQLPrinter;
import org.eclipse.persistence.internal.expressions.SQLSelectStatement;
import org.eclipse.persistence.internal.sessions.AbstractSession;
import org.eclipse.persistence.logging.SessionLog;
import org.eclipse.persistence.platform.database.DatabasePlatform;
import org.eclipse.persistence.sessions.SessionProfiler;
public class AS400Platform extends DatabasePlatform {
    private static final long serialVersionUID = 0L;
    public AS400Platform(){
         super();
         super.setShouldBindAllParameters(false);
    public void printSQLSelectStatement(DatabaseCall call, ExpressionSQLPrinter printer, SQLSelectStatement statement) {
        int max = 0;
        int firstRow = 0;
        if (statement.getQuery()!=null){
            max = statement.getQuery().getMaxRows();
            firstRow = statement.getQuery().getFirstResult();
        if ( !(max>0) && !(firstRow>0) ){
            super.printSQLSelectStatement(call, printer,statement);
            return;
        } else {
            statement.setUseUniqueFieldAliases(true);
            ExpressionBuilder builder = new ExpressionBuilder();
            statement.addField(builder.getField("COUNTER() AS CNTR"));
            printer.printString("SELECT * FROM (");
            call.setFields(statement.printSQL(printer));
            printer.printString(") AS R WHERE R.CNTR >= ");
            printer.printParameter(DatabaseCall.FIRSTRESULT_FIELD);
            if ( max > 0 ){
                // Use of binding parameters is not allowed here, so use
                // String concatenation instead...
                printer.printString(" FETCH FIRST " + max + " ROWS ONLY");
        call.setIgnoreFirstRowMaxResultsSettings(true);
    public boolean wasFailureCommunicationBased(SQLException exception, Connection connection, AbstractSession sessionForProfile){
        if (connection == null || this.pingSQL == null){
            //Without a connection we are unable to determine what caused the error so return false.
            //The only case where connection will be null should be External Connection Pooling so
            //returning false is ok as there is no connection management requirement
                //If there is no ping sql then we can not perform the ping.
            return false;
        PreparedStatement statement = null;
        try{
            sessionForProfile.startOperationProfile(SessionProfiler.ConnectionPing);
            if (sessionForProfile.shouldLog(SessionLog.FINE, SessionLog.SQL)) {// Avoid printing if no logging required.
                 sessionForProfile.log(SessionLog.FINE, SessionLog.SQL, getPingSQL(), (Object[])null, null, false);
            statement = connection.prepareStatement(getPingSQL());
            ResultSet result = statement.executeQuery();
            result.close();
            statement.close();
        }catch (SQLException ex){
            try{
                // Had to add this check because of NullPointerExceptions
                // (maybe a bug?)
                if(statement != null){
                    //try to close statement again in case the query or result.close() caused an exception.
                    statement.close();
            } catch (SQLException exception2) {
                //ignore;
            return true;
        }finally{
            sessionForProfile.endOperationProfile(SessionProfiler.ConnectionPing);
        return false;
}(As you can see, I had to override the <tt>wasFailureCommunicationBased()</tt> method as well, due to some unexpected NPE's. (A bug, perhaps?))
This code does work. However, the performance is not very well. The first page comes relatively fast, but as you browse further in the table, each page comes slower. I assume this is because the counter() method has to be evaluated for each row in the table.
I have to get the performance better and constant. Does anyone have an idea how to optimize this further?
Best regards,
Bart Kummel

Importing Video for flash player 7

Hi, im importing video for use on flash player 7. before
importing i note that the audio and video quality is perfect.
however after importing i notice the audio quality is not as good.
i need to import with the audio embedded with the video in the
timeline. i notice there are several audio settings (kbps) but im
not sure which is best. and of course i select high quality for
flash player 7.
any ideas to get rid of the lisp that is added to the
person's voice on import?
thanks!

What all browser did you check your output on? Can you also check on a different machine, playing it locally.
Can you try and set your CPLIBS files to the latest files available in the patch--
Please try the patch available here -- incase you have not till now-- http://forums.adobe.com/message/4623434
Let me know if this works?
Thanks,
Anjaneai

BAPI for Non PO Invoice posting?

Hi Experts,
   I am posting invoices using BAPI_INCOMINGINVOICE_CREATE. These invoices have POs associated with the Item Details. This is working fine for me.
   I want to post invoices that DO NOT have a PO. Can someone please point me to a BAPI that is similar to BAPI_INCOMINGINVOICE_CREATE in functionality but does not require a PO?
Thanks,
- Vik.

I too was looking for a BAPI for non PO invoice posting. I found that the above counsel did not work for me. Instead of creating a buyside invoice, it just created a journal entry. What DID work for me was BAPI_ACC_INVOICE_RECEIPT_POST.
Below, I am pasteing the subroutines that I created for its calling. In it, for my purposes, only the invoice amount is parameter driven. My needs allowed all other BAPI parameters to stay the same.
I hope that this helps someone.
Donald Nigro
FORM create_buyside_invoice USING value(invoice_amt) TYPE p.
DATA:
    gd_documentheader LIKE bapiache03,
    it_accountpayable LIKE bapiacap03 OCCURS 0 WITH HEADER LINE,
    it_accountgl       LIKE bapiacgl03 OCCURS 0 WITH HEADER LINE,
    it_accounttax      LIKE bapiactx01 OCCURS 0 WITH HEADER LINE,
    it_currencyamount LIKE bapiaccr01 OCCURS 0 WITH HEADER LINE,
    it_return          LIKE bapiret2   OCCURS 0 WITH HEADER LINE.
DATA:
wa_obj_key(20) TYPE c.
fill header
gd_documentheader-username   = sy-uname.
gd_documentheader-header_txt = 'E-Payables Invoice'.
gd_documentheader-comp_code = 'EAUS'.
gd_documentheader-doc_date   = sy-datum.
gd_documentheader-pstng_date = sy-datum.
gd_documentheader-doc_type   = 'KR'.
CONCATENATE 'BOA' sy-datum sy-uzeit(4)
               INTO gd_documentheader-ref_doc_no.
fill AP (line 1)
it_accountpayable-itemno_acc = 1.
IF sy-sysid(3) = 'DEV'.
    it_accountpayable-vendor_no = '0600013370'.
ELSE.
    it_accountpayable-vendor_no = '0600009022'.
ENDIF.
APPEND it_accountpayable.
fill GL (line 2)
it_accountgl-itemno_acc      = 2.
it_accountgl-gl_account      = '0001112227'.
it_accountgl-comp_code       = 'EAUS'.
it_accountgl-pstng_date      = sy-datum.
it_accountgl-fisc_year       = sy-datum(4).
it_accountgl-fis_period      = sy-datum+4(2).
it_accountgl-bus_area        = '0100'.
APPEND it_accountgl.
fill currency ammounts for lines 1 & 2
it_currencyamount-currency    = 'USD'.
it_currencyamount-itemno_acc = 1.
it_currencyamount-amt_doccur = invoice_amt * -100.
APPEND it_currencyamount.
it_currencyamount-itemno_acc = 2.
it_currencyamount-amt_doccur = invoice_amt * 100..
APPEND it_currencyamount.
CALL FUNCTION 'BAPI_ACC_INVOICE_RECEIPT_CHECK'
       EXPORTING
            documentheader = gd_documentheader
       TABLES
            accountpayable = it_accountpayable
            accountgl      = it_accountgl
            accounttax     = it_accounttax
            currencyamount = it_currencyamount
            return         = it_return.
PERFORM invoice_error_check TABLES it_return.
CALL FUNCTION 'BAPI_ACC_INVOICE_RECEIPT_POST'
       EXPORTING
            documentheader = gd_documentheader
       IMPORTING
            obj_key        = wa_obj_key
       TABLES
            accountpayable = it_accountpayable
            accountgl      = it_accountgl
            accounttax     = it_accounttax
            currencyamount = it_currencyamount
            return         = it_return.
PERFORM invoice_error_check TABLES it_return.
COMMIT WORK.
WRITE: / 'ePayables Bank of America'.
WRITE: / ' Invoice Document Number:',
              wa_obj_key(10).
ENDFORM.
     Form invoice_error_check
FORM invoice_error_check TABLES it_return STRUCTURE bapiret2.
DATA:
bapi_success(5) TYPE c VALUE 'false'.
LOOP AT it_return.
    IF it_return-type = 'S' AND bapi_success = 'false'.
      bapi_success = 'true'.
    ENDIF.
ENDLOOP.
IF bapi_success = 'false'.
    WRITE: / 'Unable to post a buyside invoice with',
             'BAPI_ACC_INVOICE_RECEIPT_POST'.
    LOOP AT it_return.
      WRITE: / 'Message Type:   ', it_return-type,
             / 'Message Class: ', it_return-id,
             / 'Message Number: ', it_return-number,
             / 'Message:        ', (80) it_return-message.
    ENDLOOP.
    ROLLBACK WORK.
    STOP.
ENDIF.
ENDFORM.

How to setup EWA for non-ABAP system with SM 4.0 ?

Hi, we are running SM 4.0 with the support-stack 06. I have set-up a solution for monitoring which includes a NW04 WebAS 6.40 Java only system. Has anyone set-up EWA reports for this type of non_ABAP system who can advise of the steps necessary for this ?
It seems like you need to define RFC destinations for where the monitored system data should be collected from , but there doesn't appear to be anywhere to do this for non-ABAP systems ?
I have looked at Note 738676 - Service Data Download for Non-ABAP Components but it hasn't helped and it seems to be SDCC specific, rather than SDCCN.
Thanks.

Hi Andrew,
we are just developing it, at the moment you have the following option, your java system has to send by ccms agends its data to an ABAP 640 system or higher, there you can see its alerts in ccms, then you have to make both system available in SMSY. Then important you have to assign the java system as a system component, then we collect also the java data and shows them in the EWA of the ABAP system. There for go to the main instance tab and set a java main instance to relevant and assign your java system.
This is the old, available standard solution. At the moment we develop it also for java stand alone.
I think it will be available with the new ST-SER in autumn
Regards,
uDo

Importing HD for non-HD timeline... downconverting?

Similar Messages

Maybe you are looking for