Importing images to iDVD

I'm having a problem importing images into iDVD. They import fine on computer but when I burn, they are covered in white lines. What do I do to save frames from iMovie as stills to prepare them to be imported into iDVD?

In iMovie put your playhead where you want an image taking from, and then click on file and save frame. This then will ask you where you want it saving and what type.

Similar Messages

Importing Images into IDVD for Slidshow

I am at a loss as to what is the best image size, resolution size, etc. when it comes to importing images into IDVD. I usually size my prints
4 x 6 @ 300 dpi.. This looks fine in the slideshow preview. After I burn the dvd and view it, the images lose quality, etc..
Any help would be appreciated

What you're creating in iPhoto is a movie file that will get cut off in iDVD because of the TV over scan issue. Only stills imported and assembled into a slideshow in iDVD can be scaled to avoid the over scan.
So to get what you want you'll have to import the stills into iDVD from iPhoto and create the slideshow there.
If you have Quicktime Pro you can mask the QT movie with a black mask and cause the iPhoto QT movie to be scaled to the TV safe area. The steps are below. You'll have to experiment with the final sizes to get it exact:
Masking Movies to the TV Safe Area for iDVD
The mask should be 640 x 480 pixels and the movie at approx. 580 x 386 (I arrived at this figure by making a snapshot of the TV save area of an iDVD project with Snapz). You can set this size after you’ve joined it with the mask movie with Quicktime Player Pro.
Import the black mask jpg file into iMovie and and export it as a .mov file at the same length as your movie (there may be a way to not have to create a specific length mask for each movie but I haven't found it. If the times do not match the movie file will be synced to the length of the mask movie).
Open the mask movie in QT Player Pro and then open your regular movie and make it the front window of the two. Now you'll need to run a QT Player AppleScript titled "Merge Movie 1 into Movie 2". You can get it from this Apple site: Quicktime Player Scripts.
Then run the script. You can then run the merged movie to check it out. Your movie will be located in the upper lefthand corner of the window when played.
When you open the Movie Properties window from the Window menu for the combined file you’ll see the following:
Video Track 1: the black mask
Video Track 2 : you movie file
Tween track: Have no idea what this is.
Sound track: self explanaotry
Black mask.
To set the size of your movie to the correct size select it in the Properties window and click on Visual Settings pane. Then enter 580 in the first field and hit enter. With the Preserve Aspect Ration box checked the other size will automatically be set.
To center the video track in the center of the mask select the Video Track 2 item and plug in a offset of about: 70 & 45. You'll probably have to play with that to fine tune the centering. Doing the math and subtracting the movie dimensions from the mask dimensions and dividing by two just didn't get it perfectly centered bit with a little eyeballing and trial and error it got there.
Now save as a new self contained movie after checking the High Quality box at the bottom right.
You can now import it into iDVD for preview and burning. One drawback is that you can't invoke the TV save area for a movie in iDVD to check it out. But you can mark it on the monitor screen while viewing a menu or slideshow and then play the movie to see how close you came. I found that the size was still a little under the TV safe area when burned and played on my TV. It may be the difference in normal CRT screens and flat screens, etc.

HELP: How do I use iPhoto 08 to import images onto my iPhone 3G?

Hi,
I was wondering how best to import images into my iPhone 3G for viewing.
Most of my image files are large high quality 2 -4 MB files.
Is there an easy way to downsize the files for viewing on the iPhone 3G? Does iPhoto have a setting specific for import/export use with the iPhone?
How do I set a specific photo as the phone's wallpaper and does it have to be specifically sized to use as wallpaper?
I have read the iPhone 3G manual but it was less than helpful just saying "Use iPhoto to import photos onto your iPhone"...

here is a thread with lots of discussion of this topic - http://discussions.apple.com/thread.jspa?threadID=1618079&tstart=105
In general you make album(s) of the photos you want on the iPhone and sync the album(s)
LN

Unable to add/import images from other sources

Hi,
I'm using iPhoto 5.0.4, and I'm trying to import images that were captured on another Mac using iPhoto 2 and then burned to CD so that I could take them home. When I go to "Add to Library", it tells me that iPhoto could not import the files because they may not contain valid data or it may be an unrecognized file type. The file type is the same. Whether it's valid data or not is impossible for me to interpret since the pics open up in any image editing program just fine.
Any suggestions or work arounds?
Sophie

Hi Sophie,
Where are the images that you are trying to add to the library?
did you put them in the iPhoto Library folder in the Finder manually?
If you did, drag them to the desktop, then add them to the library.

Having problems burning/creating disc image in iDVD 6

I am currently experience new problems trying to burn or create a disc image in iDVD 6. I have successfully burned iDVD projects in the past with the same computer/iDVD 6. The iDVD project looks like it is processing normally, even creates a labled disc image- but when you click on it, it reads "My Great DVD", and the video and audio files are also unreadable or absent- the error message for the VIDEO_TS.VOB file I pulled up read, "There is no default application specified to open the document "VIDEO_TS.VOB".
My older son just got Toast 7 Titanium for me, so I have that resource. I also just bought extra memory to bring me up to 1.25 GB, and an external hard drive with 320 GB. I have a younger son and a friend who will need me to make a dance audition DVD for a CA college dance department that must be in So Cal by 1-19-07, so you can imagine I'm getting a bit nervous about this. I have verified permissions, reinstalled iDVD from the original, and re-done the original iMovie/iDVD project that first caused the problems- a 12.8 GB project (but have not re-done things since I got more memory on my computer). I don't know how big the audition DVD's will be, but estimate they won't be that big (hopefully), but will consist of many short clips/chapter headings. I know just enough about computers to know what I don't know, so would really, really appreciate some basic help!

My Great DVD", and the video and audio files are also unreadable or absent- the error message for the VIDEO_TS.VOB file I pulled up read, "There is no default application specified to open the document "VIDEO_TS.VOB".
I don't know what you expect. You're looking for a problem where there isn't one.
The AUDIO_TS folder SHOULD be empty and (unless you've installed spercial software) you WON'T have any application to open the VIDEO_TS.VOB.
If you want to play the disk image, open Apple's DVD player application and then use it to open the VIDEO_TS folder.
This Burning a disk image file on a CD or DVD in Mac OS X at http://docs.info.apple.com/article.html?artnum=93006 is how you burn the disk image you have to writable media.

Mac OSX, 10.7.5, LR 5.6 After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it. Why is it doing this?

Mac OSX, 10.7.5, LR 5.6 After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it. Why is it doing this?

I am experiencing Mavericks failing to copy subdirectories from usb sticks, I am backing up game saves from a console. Both sticks I use are fine, same permissions of course since the console wrote the files. Sometimes it copies, sometimes it doesn't. It seems to be related to the mounting process.
Thank God Apple hasn't (yet) broken bash.

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3.

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3. Any suggestions?

Solution discovered. Faulty connector cable. Tried a different one and it worked.

Aperture 3.3 updated. Importing images, can no longer access drive

This has happened several times. Let me try and explain it a little better.
I import images, step away from my computer, come back screen is blank (display asleep) the computer is not. I hit the space bar to bring it back to life and then try to do the next import. For some reason Aperture cant find the disk after that. I can get to it in finder and see the filesystem and folders.
The only way I can get back into the library is to disconnect the drive, close aperture, plug the drive back in and start aperture. If I close aperture and re-open it, it says I dont have the proper permissions to open this library, checked that, I have read & write. I dont have this problem ising the drive with any other app.
Never had this problem prior to upgrade & if I keep importing without the screen going dark it appears to stay working. Its very strange.
Anyone?

I am the person who first posted this question yesterday. After reading other postings this morning, I followed the advice to "restore" 3 Mozilla files which had been quarantined by Norton Internet Security yesterday. My Firefox 3.6.6 now works great. Also see:
http://community.norton.com/t5/Norton-Internet-Security-Norton/What-is-WS-Reputation-1/td-p/228251/highlight/true;jsessionid=ED9D38B27E367CBEDBE1FB7DD5244F98

How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

Hi Keith, and all others chiming in, I do have the correct option checked in advanced settings telling iPhoto to copy the images into the library. What is a refernced library? Perhaps this is where I am getting confused. I exported my entire photo library from an old iMac5 to my external hard drive, from there I attempted to import the entire library to my new iMac. Am I overlooking an obvious and easy way to import from the hard drive to the new iMac--I dragged the entire photo pholder from the hard drive to the open window of iPhoto on the new computer. Now, I only get preview file sizes in iPhoto, unless I have my external drive open. Perhaps I need to import the original images from the hard drive in a different way...?! (This is making me feel pretty stupid.)

How to import images in iPhoto?

I use iPhoto importing images from this same computer and from iPhone with iCloud. A problem I've always suffered also before buying iPhone was that I can't import images in iPhoto.
Well, I can drag an image from, for example, the desktop, but if I delete that file on the desktop I won't be able to open that image in iPhoto, even if I've imported it. This is because of I don't know a way to "consolidate the library" in iPhoto (while I usually do it in iTunes), so iPhoto just manages my images, but it doesn't really import them.
When, in iPhoto, I import a photo shooted with iPhone and showed in Photo Stream, that photo is really copied in the library, so in the computer, and I can delete the photo source, in fact if I delete that photo from Photo Stream that photo will remain however in iPhoto, and if I click on the high menu bar (FIle, Show Original ), a Finder window of the folder in which there is the copied photo will be opened. That finder is "hidden" in the stuff of the iPhoto Library (in Images folder of Mac), but it's not simply to go and find any photo in this way (folders and subfolders named with long numbers).
So can I choose what way to use? The good of that second method is that iPhoto manage directly and really its photos because it "has" them, but the bad is the almost impossible way to find photos in that organization library (waster than iTunes media folder, that is clear). The good of the first method is that no automatic copies will be created because iPhoto just manage photos which remain in my folders, but the bad is that iPhoto doesn't manage them direclty, but depending on my folders and my files wherever and however they are, and I can't edit them because I would change the file that is used in iPhoto with an other different version.
I think this is an annoying problem because there is a file with photos (i.e. the iPhoto Library) that contains copies of photos occuping memory while I don't know this is happening, because that copy is not announced, and simultaneously I have those photos of iPhoto free to be changed and removed with the risk of disappearing from the photos of the program.

I can drag an image from, for example, the desktop, but if I delete that file on the desktop I won't be able to open that image in iPhoto, even if I've imported it
That's an indication that you may have your library set up as a referenced library:
Check the Advanced preferences in iPhoto to see if that checkbox is selected or not. If it isn't checkec, check it and try importing agan.
To make sure all Photo Stream photos are automatically imported into your library set up iPhoto's PS preferences like this:
You should read this User Tip by Terence Devlin which is the best treatise on how to access photos (for use outside of iPhoto): How to Access Files in iPhoto
OT

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

Importing images with Lightroom 2 & Camera RAW 4.5

The following query has been raised with Adobe Technical Support (5 days ago and I am still waiting for a response/reply. They claim to reply within 24 hours but they have not on this occasion......they seem to be ignoring me
Perhaps a fellow user can help to identify or resolve the problem.
Operating System:
Windows XP Professional (Service Pack 3)
Software:
Adobe Design Premium CS3 (10.0.1); Photoshop Lightroom 1.4 (which was working fine) and Lightroom 2 (on trial and not working particularly well)
I am using a trial download of Photoshop Lightroom 2 (with Camera RAW 4.5 in Photoshop CS3).
I am having a few problems with editing Lightroom 2 images in Photoshop CS3 but I understand that Adobe is currently investigating a solution to this problem.
I have also noticed another potential problem since I have started to import images from a computer drive to Lightroom 2 and converting the Manufacturers RAW files to DNG (with the option to leave the files at their current location/drive).
My RAW and JPEG files open ok in Camera RAW (v 4.5) for basic editing and subsequently to Photoshop for more detailed work. The problem is that all my images are now opening as Smart Objects by default in Photoshop CS3, as opposed to opening as a Background layer". (I have not knowingly opted to use the Open as Smart Object option.
I am not entirely sure how this came about but I have also lost the capacity to edit images with empty Levels adjustment layers or percentage (%) grey fill option).
I am able to highlight the respective layer and create the empty Levels adjustment layer, change the blend mode to either Multiply or Screen, fill the Layer Mask with Black (Alt & backspace), change the opacity level as desired, select the brush tool and change the foreground colour to white to enable the applicable Dodge or Burn processes.
Unfortunately, it does not function irrespective of the preferred opacity level. The Dodge or Burn feature is static with no effect on the image.
I cannot recall any settings to open all files as Smart Objects in Photoshop CS3 but would welcome some help in identifying such a setting if it exists. Alternatively, I would welcome any other suggested methods of correcting the above difficulties.
The same difficulties are evident when I try to use the Dodge or Burn features via the Edit and Fill option with a percentage of Grey and the Overlay Blend Mode.
The "Common Denominator" of the above difficulties appear to be Lightroom 2 and Camera RAW 4.5 (individually and or collectively) and now I am stuck between a rock and a hard place.
Are any other users experiencing similar issues or have any suggestions about how I might correct or resolve these problems? ......
I am not afraid of hearing or accepting that the "Dummy Factor" has played some part or how I may release myself from the said "Dummy Factor".....any help is welcome help.
Adobe Technical Support seems to be ignoring me......I wonder why?
Regards
Bob Wallace

Essentially you are wrapping the raw image data into a special type of layer, a "smart object". You can then revisit and fine tune the Camera Raw conversion as often as you want and take advantage of working directly on the raw data in its pre-Photoshop purity. You can also apply to this smart object layer a number of Photoshop adjustments and filters - and again redo and fine tune them as often as you wish.
You'll find them explained in a number of recent books. I know Scott Kelby is keen on them, there are examples on Russell Brown's site, and my own book last year on B&W strongly advocated their use.
Have a play.
John

Is there a way to import images that have been edited and assign them to the original?

I am transitioning to mac and aperture. Is there a way to import images that have been edited and assign them to the original? I have 10,000 originals and about 2,000 edited images. The originals are named img_XXXX and anything modified img_XXXX_modified. I would like to be able to import the originals and then import the edited versions and assign them to the original masters. Instead of starting from here and going forward with 12,000 masters, some of which are actual originals and others not. Thanks for the help.

Ah, the vestiges of a destructive workflow! Once you "get" Aperture, (specifically Masters and Versions) you are going to love it, as all of this work goes away - the relationship that you seek to retain is automatic in Aperture; it is simply done differently.
The short answer to your question is EVERY image file that is Imported into Aperture will create a new Master and one Version. Assuming that your images are PSD/TIFF/JPEG that you created in something like Photoshop, then each one that your import will be a new Master. You have many options:
-- Stick the originals in one Project(s) and the edited versions in another Project(s).
-- Stick them all in the same Project(s) and "Stack" them.
But here is the real question: Why are you doing all of this work and what are you trying to accomplish? Seems you are trying to preserve old things that don't need preserving in a non-destructive workflow.
So, what is most valuable to you?
-- The original, out of camera files? (That is, the fear/need to revert.)
-- The edited versions? (That is the hours of work that it took you to get there.)
If the former, import the originals and ignore the edited versions. (Either simply leave them out on disk or import them into their own Projects which you ignore.) Use Aperture to recreate the work you had done previously. This will always give you the ability to revert to the original Master and create as many Versions as you want. This is the best idea if your edits are relatively simple crops and exposure adjustments,
If the latter, then import the edited versions and do as above with the originals. This makes more sense if your work uses lots of layers and, perhaps lots of clone tool type corrections.
Of course, you can do a bit of both.
Others may have better suggestions, but you will find it easy to answer your own question when you understand an image based, as opposed to a file based, non-destructive workflow.
Good luck!

HT4101 The SD card reader won't import images to the iPad. I purchase 10 months ago, and haven't had a problem with it until today. How do I remedy this problem? I'm about the go out of town and prefer not a travel with my laptop.

My SD card reader won't import images from the SD card. I purchased this product 10 months ago and have had no problem with it up to now. How do I remedy this problem. Using the product allows me to travel without a laptop ...Please help!

Have you tried to give your device a reset? Sometimes that helps with glitches. Hold down the sleep and home keys, past when you see the red power down slider and until you see the silver apple. Let it reboot and try again.
ALso, the card reader will only see files that are formatted correctly. If you just took the images from your computer and put them onto the card, then it won't work. They have to follow a strict naming convention. There has to be a folder named DCIM on the card and then all those images have to have a file name of exactly 8 characters, DSC_3857 for example. Your camera makes this naming structure but if you manually put the photos on that card you may not have replicated it.
Is this a card you've used before? If it's a new card and is empty then the iPad won't read it. Also if it's SDXC it won't read those either (XC cards use a file structure that the iPad can't decipher)

Imported image's position moves when updated in Indesign CS6. Why??

After modifying an imported image from illustrator, the imported image's position moves within the frame of Indesign CS6 when the link is updated.

You have not provided any relevant information, so nobody can know. you can simply have added content that expands the bounding box. Well, whatever, ask in the relevant forums and be much more specific.
Mylenium

Importing images to iDVD

Similar Messages

Maybe you are looking for