Importing iMovie 5 Projects Into Version 11?

Hi Gang!
A quick one. I have a bunch of iMovie projects made with iMovie version 5 I did on an old MacBook (PPC). Since there's no "Open Project" on the new iMovie 11 menu, is Import->iMovie HD Project the right way to do it?
Is this going to re-create the whole movie all over again? In that case should I delete the old version 5 iMovie project to save space?
Thank you,
Gabster.

Import/iMovie HD project is the way to go.
I haven't tested it except from iMovie 6 HD, the version after yours. It is possible you would have to convert first to iMovie 6 and then to iMovie 11, but it may work from iMovie HD directly. As I say, I have not tested.
You should know that it will import your video clips into an iMovie 11 Event. Any clips that you had selected for the project timeline will be placed into an iMovie 11 Project. However, it will not carry forward any special effects, music, titles, etc. I think transitions will be replaced with a cross-fade transition. This is from memory, but all this is documented in iMovie/Help.
Once you have done this, you can delete the iMovie HD project. Your event clips will now be available to all projects without having to duplicate them every time you use them.
I would keep it for a month or so until you get the hang of the new version just to be safe.

Similar Messages

Importing imovie project into Final Cut Pro

Hello I need help getting my HD imovie project into final cut pro. I recored the project in 24p and it's already imported into imovie. What is the best way to get it into Final Cut Pro so that I can edit it further without sacrificing the quality.
Another problem is that I have heard that imovie compresses the video and totally ruins the quality. Is this true? And is this reversible in any way? I have already recorded over all the clips for this project on my camcorder. How screwed am I?
-Michael

First thing to do is find your original clips that you captured in IMovie. I don't have much experience in IMovie, but see if you can select a clip and control click and choose reveal in finder. If that works, open one of these clips in quicktime player and hit command-i and let us know the format of the clip.
Kind of doubt you'll be able to actually import your project into fcp, but you should be able to recreate it in fcp without too much difficulty.
Let us know what camera you shot and captured from. That may be of some help.
Hopefully someone with more experience in IMovie will speak up, but hopefully this will get us started.
Message was edited by: Michael Grenadier

Importing iMovie project into another iMovie project

Due to some problems experienced, I had to import video clips from my DV camera into two separate projects.
However, I would like to edit my video clips together as it was intended to be one continuos video after being edited.
When I open the first project and try to import the other project into it, I get a message saying:
Error during import
The file could not be imported: The file "_" can't be imported; QuickTime couldn't parse it: -43
As I am on a deadline, I would really appreciate any input.
Thank you

I'm getting the same problem and I've even tried cutting and pasting the clips to a new drive. Opening up a new project and then importing the clips into the new project. It tells me that it is preparing the clip for import and then nothing happens. Imovie hd goes into non responsive mode, I have to force quit cuz it hands up for about 20 minutes... then when I try to open the new project, the clip I was trying to import is listed as being in the trash. if pull it into the timeline half of it will be there but the other half won't.. This has only just started to happen. I've been able to do it successfully two days before. Any ideas?

How do i import imovie project into final cut pro

I movie 08 is seriously lacking titles and transitions, so I want to spruce up my project in final cut pro, but I do not know how to get the project into final cut pro
thanks for your help

YES!
Apple seems to be talking down to users with much of the workflow and nomenclature in the iLife Apps - it's almost insulting.
But I'm as old as the hills too - grumping has become one of my favorite pass times.
And while I'm at it:
I still can't figure out why there is a "GO" item in the menu of OSX. WTH is THAT ? And why can't users change it's contents? Very PC. It would be more tolerable if we could use it like the OLD Apple Menu back in OS9. The Dock is cute GUI eye candy but I'd like the option of "docking" items in a menu too.
I'll shut up now before I get in trouble...
g

I want to import one imovie project into another one. In other words, I have created a short sequence in iMovie 11 on one computer, and I want to import it into a project that I am working on, on another computer.

I want to import one imovie project into another one. In other words, I have created a short sequence in iMovie 11 on one computer, and I want to import it into a project that I am working on, on another computer. I copied the project files onto a hard drive, and then connected that drive to the Mac that my main project is on, but when I select "import" the files are faint gray -meaning I can't select them. Help! I want to transfer a sequence of shots from one iMovie 11 project on one computer, into another iMovie 11 project on another computer.

Tell me it ain't so!
I wish I could. The research you've done is correct.
Wether you copy and paste or rebuild the Project from the other computer, you're going to need to get your Evnets copied from the other computer.
The Prjoject files only contain pointer back to the original media.
Matt

How do you import multiple iMovie projects into one iDVD project?

Hi.
I'm 17, and am trying to create a DVD of when the family went on a cruise. For different places/days, I've created different iMovie projects.
But, when I want to export to iDVD, it only lets me put one iMovie project into one iDVD project?
I've tried dragging the actual iMovie project files into iDVD but that doesn't work.
I know I could export to QuickTime and then drag it into iDVD, but it seems exporting just to iDVD is much quicker, and the quality is better.
Anyone know how I can do this?
cheers
+P.S. If it helps, it's iMovie '11 with iDVD '09.+

That is not true. You can use them all in one DVD. I have just created my first DVD which has a trailer, a movie with chapters and several different slide shows.
All you have to do is save each project to Media Browser. (Choose Share in toolbar). Open iDVD and choose your theme or no theme. On the right will be all your options such as audio, media photo's etc. Choose your various video's/projects etc and just drag and drop which ones you want to the page and they will automatically put themselves there with the given name of each video/project.

Just bought FCP, there is no option import imovie project...help!

This is my first contribution to these discussions.
I just bought FCP.
In my trial version there was an option under file>import>import imovie project
But in the bought version there is no such thing.
How is this possible? Can anybody help me, because I would like to import an imovie project.
Thanks a lot!

Hi Luis, thanks
I guess I have to explain a little more.
I got a new computer.
Old computer was backed up via Time Machine.
I was working on an imovie project in April and I would like to continue now, but this time finish it in Final Cut Pro.
The Imovie project was created in version 9.0.8 and it seems impossible to open it in the newest version (10.0.2) that I also have installed. It doesn't even want to open in 9.0.9. The only way I can see it is by opening the oldest version of imovie.But the project has been changed somewhat and I cannot work on it anymore in this version.
The changes are no problem, I can fix them, but how do I export it into the newer versions is a mystery to me.
So...maybe you are able to give me some tips as how to open this project in the newest version?
Because then maybe I can export it to FCP.
Thanks

Final cut pro x importing imovie project

I have iMovie '11 and am trying out Final Cut Pro X's trial version. Final Cut Pro X will not successfully "import iMovie Project." Two things happen: 1) It starts the import of the iMovie Project but only reaches the point where it shows video outline in dark grey with no acual video imagery and 2) shuts down Final Cut Pro X with a follow on option to "Report, Ignore" to Apple. I've reported it, but would like to know if anyone is having the same issue and if there is a fix. I have just the Trial Version to see if I wish to buy, but if functions are not working properly I won't buy it.

I have the full version and I can't get iMovie '11 projects to import into FCPX. I have tried everything I can think of. The import progress bar starts, then it crashes. Anyone with instructions on getting in it please help. I am migrating stuff to my new MBP and the iMovie stuff is recognized by the iMovie on the new MBP. The iMovie events did import into FCPX fine however.

Final Cut won't import imovie projects with stills

Final Cut is importing iMOvie projects that just consist ov video clips, but some of my iMovie projecys have been complied form stills (jpeg and png files) that have been imprted into iMovie.
It seems to me that stills are treated differently to video in iMovie, the images are imported directly into a project, not the event folder, but in FCP images are imported (and viewable) into the event the same as video clips.
Is this the reason that FCP crashes when I try to import these projects I wonder?
(I can post a crashlog if it helps)

This is happening for me also. Will import simple iMovie projects, but crashes every single time with a more complex iMovie file; it may be the inclusion of stills. I am using the 30-day Trial version.

Low quality of burned DVD even if I drag&drop iMovie project into iDVD

Hi all,
I've a iMovie HD project that I want to burn via iDVD (7.0.4).
If I click "Share with iDVD" the quality of the resultung video (which is burned to DVD) is rather poor. As I've read within this discussions, the preferred way is to close iMovie and "drag and drop" the iMovie project into iDVD.
With this way, iDVD (instead of iMovie) will render the movie, which should give a video with far more quality.
Unfortunately, the burned DVD with the "drag and drop" method has the same low quality as the video with "Share with iDVD".
I've done a little research and noticed that the "shared movie" for iDVD (iMovie project->Show package Contents->Shared Movies->iDVD) for a 1:10 video has a filesize of only 32kb!
Is there any way to set the "export" parameters for this "shared movie" (it is a quicktime file)?
The quality of the completed DVD is acceptable if I export the iMovie project to "DV stream" an import this stream into iDVD. But in this case I lose all my chapter markers of the movie ..
Is there any way to export the movie from iMovie HD and keep all the chapter markers for iDVD?
Importing the iMovie HD project into iMovie 08/09 is not an option, as I lose the chapter markers also ..
Thanks in advice,
Kind regards.

Hi,
the iMovie project was created as "DV" project and I imported DV PAL clips. The iDVD preferences are also PAL (25fps) and the quality setting is "professional quality".
I've also tried the setting "best performance" within iDVD (as suggested within this forum), but with the same poor result.
I can see within the iDVD "project info" that iDVD will use "mymovie.mov" within the "Shared Movies->iDVD" of the iMovie project (Show package contents).
As this converted movie is of low quality, I think this is the root of evil.
If I export the movie from iMovie with "Export as DV stream" and import this converted movie into iDVD the quality is ok - but I lose the chapter markers ..
Is there any way to keep the chapter markers?
Kind regards.

How to import existing projects into JDeveloper 11g

I am trying to work with JDeveloper for my application and want to know whether it is possible to import existing projects into the work space in JDeveloper. I am currently working with eclipse IDE and this feature is available in it. How can I connect to clear case from JDeveloper? In eclipse it is very easy to connect to clear case with a plugin installed and check out, check in files from the source control. Any help is greatly appreciated.

The basic way to import code is to use the "New->Projects->Project from existing code" or "project from WAR" dialogs to create your project.
You then need to do some tweaking in the project properties->Content (and sub nodes such as resources and Web content).
And also set the correct JARs/Libraries in the project properties.
You can use the help->check for update to download the extension to JDeveloper that will let you integrate with Clearcase to do version management.
This how-to might help you with your migration:
http://www.oracle.com/technology/products/jdev/howtos/1013/w4wljdev/workshopandjdev.html

Final Cut Pro X crashes when I try to import iMovie project?

I have a large iMovie project that I am trying to import into FCP. Every time I do (FILE -> IMPORT -> IMOVIE PROJECT) it starts to import, then crashes without warning, giving me a crash log report.
I am able to import another smaller iMovie project just fine, but the one I actually need to import doesn't work.
Both projects use video clips from the same event library.
Any ideas? Or in a backwards way, any ideas on how to recreate it in a fresh iMovie project to import into FCP? (I've tried duplicating it in iMovie and it crashed on import too).
(...I understand why there have been so many complaints about FCP now.)

Figured it out! After almost 24 hours, I cracked it
Let me give you a bit of back story...
I had an iMovie project that I had built on my Macbook. I just got a new iMac and installed FCPX on it. Was hoping to do some more professional alterations to the project.
So I consolidated the project in iMovie, copied it along with the files to an external hard drive, then transferred it over to my new machine.
Every time that I would try to import the newly copied project, it would get a few seconds in, then crash with no error message... just a crash report.
I was able to import a smaller project that used some of the same videos, so I knew that it wasn't a codec issue or something like that.
Then, through the process of trial and error, I figured out that when I had consolidated the project on my old machine, it didn't truly consolidate the files that I had used. There were a handful of still images that I had used in a different folder on my computer. So I copied that folder to the same path on my new computer, tried to import, and just like that, problem solved.
I guess FCPX doesn't know what to do when something isn't exactly where it's supposed to be. Hopefully in the next software update, they'll alert the user what the error causing it to crash is so that others don't have to waste nearly a day troubleshooting for one obvious (oops) mistake.

Importing IMovie File into DVD Studio Pro 4

I used to be able to import the index file from an IMovie project into DVD Studio Pro quite happily.
Today the application freezes on the import progress window, with no files appearing in the asset window.
I have to force quit the application to get out of it.
Can anyone advise how to resolve this issue ?
Power Mac G5 - Dual 2GHz Mac OS X (10.4.2)

If you haven't changed anything on your system, then it would appear that you have one of two things.
Most likely, your preference files have be come corrupt, or second, your Application or application resource file for DVD SP have become damaged.
Try first to toss your DVD SP preferences, if this doesn't do it, then you should uninstall DVD SP and then reinstall with all of the updates before trying again.
If you have tried creating a new project from scratch and the problem persists, then read on.
If that doesn't do it, then there's a very slight possiblility, that there may be an issue with the QucikTime files of the OS, and keep in mind, (this is a very remote possibility) you may have to wipe the drive and reinstall the OS and apps. from the original disks, but only after everything else fails, (THIS IS A DRASTIC LAST DITCH EFFORT.)

I'm trying to import iMovie Hd into iMovie 11, photos import but no video

I'm trying to import iMovie Hd into iMovie 11, but all that imports are my jpg still shots, no video. Does anyone know what I may be doing wrong?

I'm having the same problem. I have iMovie HD v6 and i use File > Import > iMovie HD Project, but I don't even get thumbnails. I just get a blank project. See screenshot

Importing iMovie projects

How do I import unfinished projects into the iMovie app on iPad? I am new to this app.

Not sure why you would want to import an unfinished IMovie project but this how it's done, finished or not .
Step 1
Open iMovie on your computer
Open your project in project library
Go to 'Share' in top menu bar
Click on iTunes
When it has finished transferring you will see an icon that looks like a radio beam beside your project.
Now go to iTunes and your project should be in your Movies folder.
~~~~~~~~~~~~~~~~~~~~~~~
Step 2
Connect your iPad to your computer
Now drag and drop your project from iTunes to the movies folder in your iPad.

Importing web project into Workshop 9.2

Hi,
I'm trying to import an existing web project into Workshop 9.2.1 from my Subversion source. Unfortunately Workshop doesn't recognize this project as a valid web project.
I imported the code project using 'File>Import>Existing Projects' into Workspace.
Unfortunately, I get the following errors:
- "The library module reference : beehive-netui-1.0 is not allowed from the classpath of a non-web project, only JAR,EJB, and EAR module types are allowed."
- "The library module reference : jstl is not allowed from the classpath of a non-web project, only JAR,EJB, and EAR module types are allowed."
How do I tell Workshop that this project is indeed a web project?
Does anyone have any suggestions?
Thanks,
Derrek

Wow.... I figured out a workaround (aka Ugly Hack). It seems that Workshop doesn't properly import Portlet projects. Here's how I got around it:
1. Checkout the code from Subversion
d:\MyProjects\Project\trunk\MyComponent\
2. Move MyComponent to a temp directory
d:\MyProjects\Project\trunk\MyComponent\ --> d:\tmp\MyComponent
3. Open Workshop and create a new Portal project and PortalEAR project of the same name as the MyComponent projects
File>New myComponentPortal
4. Copy over the src and WebContent directories in the SVN directory with the files from tmp.
d:\tmp\MyComponent\src -> d:\MyProjects\Project\trunk\MyComponent\src
d:\tmp\MyComponent\src\WebContent -> d:\MyProjects\Project\trunk\MyComponent\WebContent
5. Refresh Workshop and let the spooky voodoo happen. Viola! Now I've got a running portal project with a SVN connection.

Importing iMovie 5 Projects Into Version 11?

Similar Messages

Maybe you are looking for