Importing into Audition CC from REAPER

I wanted to use Adobe Audition CC for my DAW, but for some reason it won't detect the VST's that I want to use which are EZmix and EZdrummer. So I will just use my REAPER DAW. I want to then export the tracks in REAPER to Adobe Audition to do mixing and mastering. Which files should I export them as for the best quality?

Make sure you have 64-bit versions of each installed in order for Audition CC to see them. I believe Ezmix is a standard VST, but I'm not certain if EZDrummer is a VST or VSTi (virtual instrument.) If the latter, it can't be used in Audition.
When exporting from Reaper, the best format is an uncompressed WAV at 44K or 48K sample rates, depending on the project and destination. Do not export your tracks to MP3 or another lossy, compressed format if you'll be using them for further production.

Similar Messages

Importing into Aperture 3 from iPhoto as referenced files

Apologies if this has been asked before, but I can't find anything this topic...
I've just upgraded to Aperture 3. In Aperture 2, my way of working was to store RAW images in iPhoto and import as referenced files into Aperture. This was very straightforward. Now, I have 2 problems:
1 - I can't see how to import referenced images from iPhoto. If I use the import command, my iPhoto images don't show up in the list of locations to import from; if I use the iPhoto browser in Aperture and drag from that, it imports the file into the Aperture library rather than importing as a referenced file...
2 - If I import using the iPhoto browser, not only does it import into the Aperture library, it imports the jpeg preview rather than the RAW file.
The only way I can see to get the RAW file into Aperture is to find it in the Finder then import into the Aperture library. This seems excessively long-winded and also duplicates the file, using up extra disk space.
I'm using Aperture 3.0.1 and iPhoto 7.1.5
Thanks in advance for your input

I have not imported an iPhoto library because my workflow is to to use Aperture for storing and archiving Raw files and iPhoto for exported jpegs.
However the instruction in the Aperture 3 PDF Manual are as follows:-
To import your iPhoto library
Choose File > Import > iPhoto Library.
Select the iPhoto library in the dialog that appears.
Choose a location for the imported images by doing one of the following:
• To store imported masters in the Aperture library: Choose “In the Aperture Library” from the Store Files pop-up menu.
• To import the files as referenced images stored in their current location on your hard disk: Choose “In their current location” from the Store Files pop-up menu.
Tip: Choosing“Intheircurrentlocation”isrecommended.Whenyouchoosethisoption, Aperture refers to the original files in their current location and does not have to duplicate the files, which doubles the disk space needed to store the files. For more information about referenced images, see What Are Managed Images and Referenced Images?
• To store imported masters as referenced images in the Pictures folder on your hard disk: Choose Pictures from the Store Files pop-up menu.
• To store imported masters as referenced images in a location other than the Pictures folder: Choose “Choose” from the Store Files pop-up menu and select a folder. Choose “No folder” from the Subfolders pop-up menu to specify that the files be stored as separate, individual files in the selected folder. You can also specify that Aperture create a hierarchy of subfolders with specific folder names to hold your files.
=====
This extract is from page 169. Perhaps it clarifies and identifies a step you have omitted.
AW.

Importing into iPhoto 6 from Sony DSC-T1 crashes the application

Until I updated to iLife 06 I never had trouble importing photos into iPhoto from my Sony DSC-T1. Now, within seconds of clicking on the "import now" button the program crashes, and I've sent the obligitory bug report to Apple, but now the card is full and I don't know where to turn...
12 PB Mac OS X (10.4.6) iLife 06

Strange. Sorry to hear about your problems. Rather than importing via iPhoto directly from the camera, why don't you try getting the images off the card in the Finder? When you plug in the camera an icon for the memory card will appear on your desktop. Quit iPhoto if it automatically comes up. Create a folder on your desktop. Double click the memory card icon, and browse its contents until you find the image files. Drag them to the folder you created, and wait for the copy to complete. Then launch iPhoto and drag the folder of images into iPhoto.
Hopefully Apple support will be able to help you with that camera import into iPhoto. Is it on the iPhoto supported list?

RE-Importing into Lightroom 3 from external drive---simple?

This is isn't as simple as it sounds. My hard drive started to fail, but I replaced it with a new one (I still have access to all of the data on the old hard drive). I used to use Photoshop Elements to organize my photos, but moved to LR2 several years ago. I upgraded to LR3 about a year ago, and it has been backed up regularly. However, I have not done a good job of organizing my photos.
I am now learning that that LR does not actually keep the photos themselves in its database, but just a copy of the information about the photo (I know I should have known this before, but I didn't). Whenever I imported a photo into LR3, I would not have it copy the photo, but actually import it. The original file folder would be empty, so I erronesouly thought that LR3 was keeping a copy of not only the data, but the photo itself in the database. I double back up my hard drive, so I thought it would be a piece of cake to import this back into LR3. Maybe it is, but I sure can't find a simple way to do this. This is what LR has to say about it:
"Lightroom allows you to schedule regular catalog backups when you exit the software. Backups executed from Lightroom include only the catalog file. You must manually back up your edited photos, previews, sidecar files, slide shows, web galleries, and exported photos outside Lightroom"
Being a ready, fire aim kind of guy, this is the first time I have read that.
So I have installed LR3 on my new hard drive, but on my old hard drive I have LR3 folders, LR2 folders, and photo folders. I have tons of tags I created in LR3, and want to preserve the tags, but I also want to make sure I import all of the old photos as well as the LR data correctly. It appears that LR3 moved the photos into "My Pictures" which would be easy enough to bring over to my new hard drive, but I also want to import the LR3 data. I'm also not sure if the LR2 data even matters any more since I have LR3, but I can't really tell from what I have read.
Sorry for the long winded explanation, but I am trying to import the LR photos and data over from the old hard drive into the new hard drive in the most effective way possible without losing any information (like tags). Do I just drag "My Pictures" from the old hard drive to the "My Pictures" in the new hard drive and then open the latest LR3 catalog from that location? Something else?
Sorry for the basic question, but I obviously had some major gaps in my LR3 abilities.
Thanks for any help.

Hal,
Thanks very much for your help! What I first did was just drag the entire contents of "My Pictures" from the old hard drive, over to "My Pictures" on my new system (thanks to a SATA to USB plug with power brick that I am able to use to pull everything off my old laptop hard drive). However, that created two "My Pictures", with the old being a sub folder of the new. So I deleted everything, started over and imported all of the folders over individually. I also brought over the LR catologs as you described.
So I tried to open up the LR 3 Catalog, but it didn't have any data in it. There was another LR3-2 catalog, so opened that and it seemed to be the one with the data. Why there were two is a mystery to me, but within the Lightroom folder, there were other folders including LR2 catalogs and a bunch of temporary folders.
The question marks showed up on the folders as you described, but the top folder in the collection was simply the first folder of dozens of folders. There was no "My Pictures" folder within the LR collection (which I thought was odd). There was also no "Locate Missing Folder" option when I right clicked on the folders (I have Windows 7 64 bit Professional if that makes any difference). I saw the option of "synchronize folder" when I right clicked each folder. so I clicked that and it removed the question mark and seemed to work.
However, I'm not real sure of this entire setup. I have over 40 GB of photos, so it is hard to tell if the whole thing is put together correctly. I tested out some photos and the tags seem to be there, but I am going to have get more comfortable with how LR3 creates and stores data. I've started wading through the LR tutorials, but most of it I know about. It is the storage, organization and especially, the backup and reimporting of photos and information that has me squirming.
Thanks for the help!
Randy

How do I import into iPhoto 6, from CD, 'rolls' created in iPhoto 5 ?

I had saved to CD a 8 'rolls' (600 images) organised in iPhoto 5. Following death of my HDD I updated to iPhoto 6. Viewing the contents of the CD in iPhoto 6 shows the 8 rolls. Opening each roll shows all the images with the title details for each photo. Seems straightforward.
'Import' and into the iPhoto 6 Library goes 1200 images which are, I guess, the original plus the edited versions. Trouble is they arearranged in many smaller rolls & the titles are missing.
Am I destined to leave these photos on the CD & view them in full screen edit mode.

PeeM:
Welcome to the Apple Discussions. If you burned the disk from within iPhoto using the Share->Burn Disk menu option then all you have to do is launch iPhoto and insert the disk in your drive. The disk will mount and show up in the library's Source pane like this. Expand the disk icon and drag the albums into the Source pane. That will copy the albums into the library as albums and rolls.
Do you Twango?

Importing into Elements 10 from Digital Photo Professional

Dont seem to be able to open my RAW files from Digital Photo Professional into Elements 10 - have I missed something or is this not possible
Thanks
pamay

Hi pamay
It’s often simpler to open the CR2 file in Elements. You get similar sliders and tools to DPP in the Adobe camera raw dialog and any raw editing is totally non destructive. Change the bit depth from 16 to 8 at the bottom of the camera raw dialog then click open image. At 8 bit/channel the full range of editing tools will be available and you can save the finished image as jpeg knowing that your CR2 file is safe as a backup.

Elements importing photos from iPhoto into nonsensical folders - how do I convert events or import into dated folders from iPhoto into elements?

Please help! Can't seem to find the answer on the website or anywhere else online. I don't see an option to convert events from iPhoto into folders in elements. Any advice would be appreciated.

The whole point of a program like organizer is to ignore the folders and use tags and categories instead. However, if you want to preserve the iphoto events then the way to do it is not to use "from iphoto" but rather to export each event from iphoto separately, organize your folders how you want them, where you want them and then use "from files and folders" instead.

How to Import into Lightroom 3 from Photoshop elements 8?

I just installed Lightroom 3 and bypassed the option to import my pics from from Photoshop elements 8 (to see what other options were available. Lightroom advanced a page and there seems to be no way to return to the previous page, I've closed the page & reopened a few times.
I cannot locate where PSe8 stores it's files either so that is not an option. How do I reset lightroom to import my old files? Thank you.
I also see "upgrade files" but have no idea what this means & don;t see it explained; seems users are to already know the software before buying it. Thanks again!
BTW, I have tried to avoid posts in the past with my other software so not sure how I will receive the reply - assume I'll get an email.

Thanks for your guidance, I had no idea what SDK is & only noticed Lighhtroom so picked it.

Importing into partitioned table from unpartitioned table

I have taken export of a unpartitioned table using datapump.
I want to import data using these dumpfiles into a partitioned table using impdp.
Can you please provide me the basic script, I have tried running using the following script and I got the following error.
noarg impdp $SCHEMA/$pw TABLES=$ITPCS.ITPCS_BOM_GRT_SCAN$ EXCLUDE=STATISTICS parallel=4 dumpfile=dumpdir:exptable%U.dmp logfile=logdir:imptab2.log job_name=imptables_3 content=DATA_ONLY EXCLUDE=constraint,index,materialized_view
Processing object type TABLE_EXPORT/TABLE/TBL_TABLE_DATA/TABLE/TABLE_DATA
ORA-31693: Table data object "ITPCS"."ITPCS_BOM_GRT_SCAN" failed to load/unload and is being skipped due to error:
ORA-00942: table or view does not exist
ORA-06512: at "SYS.KUPD$DATA", line 1167
ORA-14400: inserted partition key does not map to any partition
Job "SYSTEM"."IMPTABLES_3" completed with 1 error(s) at 08:02

pankaj2086 wrote:
I have taken export of a unpartitioned table using datapump.
I want to import data using these dumpfiles into a partitioned table using impdp.
Can you please provide me the basic script, I have tried running using the following script and I got the following error.
noarg impdp $SCHEMA/$pw TABLES=$ITPCS.ITPCS_BOM_GRT_SCAN$ EXCLUDE=STATISTICS parallel=4 dumpfile=dumpdir:exptable%U.dmp logfile=logdir:imptab2.log job_name=imptables_3 content=DATA_ONLY EXCLUDE=constraint,index,materialized_view
Processing object type TABLE_EXPORT/TABLE/TBL_TABLE_DATA/TABLE/TABLE_DATA
ORA-31693: Table data object "ITPCS"."ITPCS_BOM_GRT_SCAN" failed to load/unload and is being skipped due to error:
ORA-00942: table or view does not existWhat do you suppose the ora-00942 means? Looks pretty self explanatory to me. Have you looked it up? Have you verified that the target table exists in the target database?
ORA-06512: at "SYS.KUPD$DATA", line 1167
ORA-14400: inserted partition key does not map to any partitionAnd if the target table does exist, what do you suppose the ora-14400 means? Looks pretty self explanatory to me. Have you looked it up?

Importing into Final Cut from Motion

Hey All,
When I'm done creating title pages etc. in Motion, I export a .mov (using the DV/DVC PRO NTSC setting)file to a folder. I then import the file into Final Cut and add it to my sequence etc.
However, I have noticed that after I import it into Final cut, the colors are flat and the graphics look compressed.
Am I doing something wrong?
Using Final Cut Studio 5.1.4
G5
OS 10.4.9
4.5 Gb
Thanks!

It's true. DV/NTSC isn't very nice to graphics and titles. They're always going to look sharper in Motion. If your final delivery format is DV/DVC PRO, there's no way to avoid that, but it might help to reduce the amount of compression used overall (because you're going to be compressing them again on final export).
By exporting your graphics using the Animation codec at Best Quality, and Millions of Colors+, you can achieve lossless compression (plus preserve transparency), so that when you bring the clip into FCP, it will look like the original (until you render it back to DV/NTSC). By only applying DV compression once at the end, you might be able to save some quality.
(Doing what Adam mentioned will work too, and is probably easier. But it's good to know about the Animation codec as well).

How do I rename a file that I've imported into audition?

Does anyone know?
Simply right clicking on the file doesn't give me a rename option. Any ideas?
Thanks!
Luisa

LuisaEmmi wrote:
Thank you. mmm, that's sadly rather time consuming.
Personally, I've never found it to be particularly time-consuming at all - and I do it all the time. The basic method is to use 'save as' for the version you want to save, and get rid of everything else you don't want to keep afterwards in one go.
One more question: I've got quite a bit of interview tape and would like to increase the playback speed to 1.5X or 1.75 x so that I can get through everything faster. Is there a way to set it at those tempos? I only see the 2X, 4X, 6X, etc. options, but these are too fast and I can't understand what is being said. Is there a way to set this to 1.5X the original speed?
Not that I'm aware of, but that sounds like a good feature request for anybody doing speech work - adding those would be useful.

How do I view movies using apple tv that have been imported into iMovie?

I am trying to view movies using a second generation AppleTV that I imported into my computer from my video camera using iMovie. I tried importing them into iTunes after importing them with iMovie but it creates a second copy of the movie and I don't have room on my hard drive. Can I view them on my Apple TV without importing them into iTunes?

Welcome to the Apple Community.
iMovie is an editing application, you import raw footage, edit it, export it and if you don't have a lot of room trash the original files. It is not intended to be used for finished movies.
Video footage for editing needs to be in a different format than it does for delivery, delivery formats (m4v etc) are highly compressed and take up considerabally less room than footage in an editing format.

TS4002 All the email I had imported into my iMac (over 75) and were listed under ON MY MAC have disappeared. how can I get them back?

All the email (over 75) I had imported into my iMac from my PC and which were stored under ON MY MAC in mail have disappeared. They were there for a year. The number 75 appears behind the word "import" but there is nothing there. How can I find them?

I found them!!!! I closed out Mail and started it up again and there they were....wierd!!!!

Re Importing into Lightroom 4.1

My photographic equipment consists of a Nikon D 7000 ( set to RAW) and a P 5000 (JPEG). My computer is an iMac with Lightroom 4.1 installed. Up until recently it has been possible to import from the SD cards directly into Lightroom via the reader in the side of the Mac. As of late the program will let me see the previews but when I attempt to import the images a message pops up that the files cannot be read! I can import them into 'iPhoto' but this is not where I want them! Can any one please suggest what has caused this new problem? I eagerly await any suggestions. With Thanks.

Dear tlsteinb.Thanks for your reply. I tried the ejection of the external drive as you suggested. To no avail! It is still a mystery to me. I do not know if i have to change a setting on the camera, the computer, or the program! I tried to send a 'chat' message to Adobe directly.How successful that will be we will wait and see! I shall keep you posted. Regards, Rae Dall
Date: Tue, 5 Jun 2012 10:20:47 -0600
From: [email protected]
To: [email protected]
Subject: Re Importing into Lightroom 4.1
    Re: Re Importing into Lightroom 4.1
    created by tlsteinb in Photoshop Lightroom - View the full discussion
Just this morning I've begun experiencing the same thing. I can get the photos off the card and onto the iMac desktop for instance, but they won't import into Lightroom 4 from either the card reader or the desktop. So my assumption is that my card reader is working fine, but Lightroom is not. Any help would be greatly appreciated.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4467079#4467079
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4467079#4467079. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to import markers from soundbooth cs5 into audition cs6

Hello, a series VO wav files were recorded in SB CS5 and markers where then added .
On opening them in Audition CS6 for multitrack editing all markers are missing.
Then in SB XML files of markers where exported for each file but there is no way Audition will open them, with a warning of corrupted or unsupported format.
So, how can one get either wavs (with markers) orxml markers into audition cs6 that where created in SB?

evan.fotis wrote:
How is it, that Adobe uses these xml marker format which AE & PP will recognize (cause they were meant for the suite) but not AU!.. especially now that SB is dumped and AU is supposed to be its successor even though they coexisted previously.
Difficult with integration issues... part of the problem is that, of course, Audition wasn't integrated into the suite when SB was its audio editor - and as such didn't require to be suite-compatible.
Because I don't ever run into these problems - simply because I don't do video - I don't have all of the answers. I do have a question though; if you open your SB file in CS6 Premiere, do you have the same problem with the markers? IOW, can you use the new version as a converter, since I believe that it's possible to transfer markers back and forth (isn't it???) between Premiere and Audition in the new version. Or is that screwed as well?
So this yields the question, what format markers will AU recognize and import? any workaround that does not invovle manually adding them in AU? perhaps renaming to txt or something that AU will understand?
Probably the best person to answer this is Suite Spot, because he's the one that has done all the development work on AATranslator, and has probably forgotten more about this than the rest of us know! What I'm pretty sure of though is that SB doesn't feature in the converter.
http://www.aatranslator.com.au/

Importing into Audition CC from REAPER

Similar Messages

Maybe you are looking for