Importing JPEGS into FCE 'unexpect quit'!

Any ideas as to why when importing JPEGS (2mb) into FCE it 'unecpectantly quits'? Its very consistent even after dumping plist.
Thanks
Luke

http://www.fcpbook.com/Misc1.html
So the file gets into the application OK. It crashes when it goes into the sequence. What are the specs for the JPEG file? What's it say in item properties? Was it made in RGB not CMYK?

Similar Messages

IMPORTING FOOTAGE INTO FCE AND MERGING FILES WITH FINAL CUT STUDIO

So I recently purchased Final Cut Express to create off-line, rough cut projects...to be completed by more qualified editors other than myself. But I want to make sure that Final Cut Express is the right system for me.
Here are my questions:
1.) I will be using a variety of video formats for this system, and will be ingesting primarily through a shared media drive. Should I be concerned by the fact that it says I can only use "HDV, AVCHD, and DV" for simultaneous edit? What if I originate my material on Beta or DVCPro and want to import using firewire?
2.) Will my timelines be compatible to other (higher-end) Final Cut programs?
Any help is greatly appreciated!
Thanks,
Chip

Welcome to the forum!
1.) If the video you plan to use is not HDV, DV, or AVCHD then it will not be able to be ingested by FCE. The best way to get your media into FCE would be to capture it, but if it originates somewhere else you can still import it into FCE provided it is one of the formats cited above. If your media is not one of these three, you will have to use a convertor to make it "readable" by FCE. If you want to keep the full resolution of another format, you are better off directly going to Final Cut Pro, as it can handle these formats.
2.) Final Cut Pro will be able to open your Final Cut Express timelines, but you will not be able to go back the other way around. So only let your editors open the project in FCPro once you are done using it in FCE.
If you are planning to shoot professional videos, FCE transcodes into Apple Intermediate Codec, usually giving you lower quality then if you were to ingest the media in FCPro, which uses ProRes for higher quality yet larger file sizes. If you are not worried about the mentioned drawbacks to using FCE as a first-cut before FCP, then you should be fine.
-skalicki

Trouble importing LiveType into FCE

I am trying LiveType for the first time with my video. I have created the file in LiveType and then tried to import it into FCE. When I view the background in the viewer it looks great. When I drag it to my movie and try Insert I get an error that says "Edit Operation had no effect. Check the target tracks. You may need to open the source clip into the viewer in order to see all of the target tracks". It doesn't add it to my timeline. I can drag it to the timeline, but when I preview the video it says unrendered as it plays. It has the red line in the bar above it and everything else in my video is green. I have rendered the video in LiveType and also just tried the LiveType file...
Anyone have any advice? I am sure this is something simple...
Thanks for your help!!

Appears to be a problem in LiveType and FCE as of Leopard.
LiveType files created BEFORE Leopard was installed import fine, but files created AFTER Leopard was installed will not import and return an error:
File Error. 1 File Recognized. 0 Access Denied. 1 file unknown.
Live Type files that are rendered as movies are importable and that is the workaround. But of course they cannot be edited again unless the Live Type file is reopened and re-rendered.
IOW, no import of a Live Type file directly into FCE.
Pro apps download doesn't appear to apply to FCE and you need a FCP serial # to access it anyway.
All suggestions appreciated.

Can you import jpegs into Livetype as fonts?

I have a logo, in which I have broken up all the letters into separate jpegs, so I can animate them in. Unfortunately Motion has limited animation for objects that are not fonts, and as far as I can tell, livetype will not animate anything but fonts. Can someone help me figure out how to...I guess create a font in which these different jpegs would make up the letters of the font, and import that into livetype? Thank you!

You pose and interesting question. Live Type works best when you use the exisiting fonts provided in the program
Yes you can import jpegs into Live Type and you can use the pre-fabricated effects to animate them if you please, you can even modify many of the effects.
If you have a just a few elements of a logo you may be able to create what you want relatively fast. You can do this in Motion as well, where you have more control, although IMO the learning curve is steeper in Motion. For that matter you could keyframe and animate in Final Cut Pro as well.
If you choose to try this in Live Type then go to File>Place and select each of you jpegs indivudually.
Good luck and post back if youhave more questions

Can't import jpegs into drop zones in 7.0 themes

I've followed the thread regarding mac book pros and hang ups with iDVD 08 and the 7.0 themes. I have a G5 and can't get the 'Revolution' 7.0 them on main menu to allow me to 'drop' a jpeg into its drop zone. I drag the jpeg over, the green sign appears like its going to allow it to be dropped, it drops but the zone remains black like nothing is there. When I go to the info tree for the drop zones, its shows up like it is there, but on the main menu it remains empty. Any one with any suggestions? Thanks in advance for any info.

Roger,
What happens if you click on the Drop Zone button and drag the image there?
This frequently helps solve some problems. Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
You'll need to reset some Preferences.

Importing DVD into FCE with decent quality

Can anyone tell me what they would do if they needed to import a DVD into FCE maintain decent quality? Not a produced movie, just like a home movie...and I can't afford DVD Pro...
Thanks very much!
Curt

Hi
My old list on this
*DVD back for futhur editing*
A. don't put a mini DVD into Your Mac unless it’s a trayloaded DVD burner/reader
B. iMovie’08 prob. 09 can import from DVD (homemade without copyprotection)
C. I prefere one of these two ways
• Copy to miniDV tape from set-top DVD-player --> Camera -or-
• Roxio Toast™ - Can back convert to streamingDV for iMovie or FinalCut
D. Read what Karsten collected.
*DVD back to iMovie.*
.. and here the complete 'full 9 yards' ... .
//discussions.apple.com/thread.jspa?messageID=3822853&#3822853
DVDs are in a socalled delivery format (mpeg2), which isn't meant and
made for any processing as editing... or, as honorable forum member
QuicktimeKirk stated. I use the analogy of the old Polaroid
"instant" cameras. Push the button, wait for the print to develop and
show it off. ..
for using the iLife apps, you have to convert'em first, in
recommended order, choose one of the following tools/workarounds.
• DVDxDV (free trial, 25$, Pro. 90$)
• Apple mpeg2 plugin (19$) + Streamclip (free)
• Cinematize >60$
• Mpeg2Works >25$ + Apple plug-in
• Toast 6/7/8/9/10 allows converting to dv/insert dvd, hit apple-k
• connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
• Drop2DV (free) a free tool claiming to convert DVDs into dv-stream...
• Use iSquint for your conversions . www.iSquint.org
from. Bobby Keene
none of these apps override copyprotection mechanisms as on commercial dvds...
//danslagle.com/mac/iMovie/tips_tricks/6010.shtml
//danslagle.com/mac/iMovie/tips_tricks/6018.shtml
be nice to copy rights ^-^
... and, next time, try the forum's search-feature...
from Beverly M.
//docs.info.apple.com/article.html?artnum=42724
Yours Bengt W

Getting error when attempting to import jpegs into Premiere Elements

When attempting to import still images (jpegs) into a video project I am able to import some, but on others get the error "importer reported a generic error," and I can't figure out why some photos load and others don't. Can anyone help?

1st, Pictures that are "overly" large may cause video editing problems
Photo Scaling for Video http://forums.adobe.com/thread/450798
-HiRes Pictures to DVD http://forums.adobe.com/thread/1187937?tstart=0
-PrEl Crash http://forums.adobe.com/thread/973935
2nd, what is the source of the picture? (ie... which camera)
SOME pictures may be created with "malformed" file header information... the solution is generally to open in Photoshop and resave to fix the file header
3rd, Pictures must be RGB not CMYK (CYMK?) http://forums.adobe.com/thread/1081681

Importing jpeg into pages

I have been sent a jpeg to use in a document.
It views fine when I open it in preview.
However, when I import it into my document it just displays as a black rectangle.
What am I doing wrong?

How are you importing it into Pages? Pages does seem to handle graphics that are inserted using Insert > Choose... better than dragging & dropping. You might also try saving the image as a PDF from Preview & using that in Pages.

Import iMoive into FCE 4.0

I've imported a movie into iMoive 5.0.2 but do not see how these directions for importing the project file into FCE 4.0 are applicable:http://docs.info.apple.com/article.html?artnum=61851
Is there a given format that the footage should first be exported as from iMoive? The instructions at the above URL do not seem to state as such.
Any assistance would be greatly appreciated.
Thanks!

The way I read the instructions, you don't export from iMovie at all. In FCE, you go to File->Open and navigate to your iMovie project.
"1. Open Final Cut Express HD.
2. From the File menu, choose Open.
3. In the dialog that appears, select the iMovie project you want to open. The iMovie project opens in the Browser and contains the sequence and clips as they appeared in the iMovie clips shelf.
Important: Final Cut Express HD does not import iMovie sound effects, audio levels, or transitions. All other applied effects are imported.
4. Double-click the sequence to open the iMovie project in the Timeline.
5. Render the sequence if necessary.
Imported clips are linked to the original clips captured and/or rendered in iMovie. These original clips can be found inside the iMovie project bundle for iMovie HD or in the iMovie project's Media folder for versions 3 and 4.
Notes:
DV Stream files do not have timecode tracks, so DV media imported from iMovie project files cannot be recaptured.
Imported iMovie DV files might not play back or print to tape in real time without being rendered first.
All imported source media must be backed up for future reediting."
-DH

Importing mt2s into FCE

I understand that FCE does not natively read mt2s files. My problem here is that we're working on a group project, and the other participants are bringing their files over as mt2s. So, what do I need to do to get this to a format that FCE can read?

As mentioned above, the cameras are NOT AVCHD, they are HD. The cameras themselves are compatible with iMovie, FCE and FCP. That's not the problem. The issue is with the files brought in from my associates on CD and DVD. They are mt2s files which FCE and iMovie cannot read.
This is a video project where several people have segments of their own video to edit, and we bring them all together as one complete unit on one machine. I happen to have that machine. So what I'm getting is not raw video, but an edited sequence complete with music, cuts and overdubs.
Back to the previous suggestion: I've loaded Streamclip and the Quicktime component. The good news is that I've been able to read, convert and import into FCE the m2v file. Which was the highest quality file that he brought over. So that gets the job done. Thank you guys. However, for the record, I still can't read the m2ts file. But that's OK, I'll advise the rest of the project team to give me m2v files, which I believe they can do without any issues.
Thanks again. Much appreciated.
-Mike

Importing iphoto into FCE

Working with FCE4.0.1/iphoto08. I thought I had successfully imported an iphoto folder into FCE. Tried several way to import. After reading other messages, I exported iphoto folder onto desktop and then imported into FCE. However, when I double-click a specific photo, it does not show up in the veiwer. I also tried to drop it into a sequence, shows the name of the photo in the time-line, but when I double-click, it only shows a black screen on viewer. Have I missed a step?

I just tried importing a single photo. Still did not work. When I drop it into a sequence and double clicked, the viewer and canvas actually shows the outline of what looks like a frame of a photo, but no photo inself. Any other thoughts?

Importing AVI into FCE has out of sync audio, but not in iMovie?

Hi all,
I'ave searched around and can't seen to find this issue in other parts of the forum, so thought I would try posting up. I'm using a GoPro camera which creates AVI files at 27fps, 512 x 384, Mono Audio, 8.0KHz, 32-bit Floating Point. I'm totally new to FCE, but when I drag these files into the project space and watch them on the viewer... it seems like the audio is almost 10 seconds ahead of the video right off the bat. It was the case with all 6 videos I had.
The crazy thing is when I drag these files into iMovie... the audio and video is sync'd up fine. Is there some setting in FCE that I'm missing that's causing this issue?
Any help would be greatly appreciated... I just went out and bought FCE because I figured if I'm going to start editing video more often... I should step up and of course I can't even get my raw clips to play correctly right off the bat
Thanks in advance for any help!
Jack

A DV-NTSC video file of 12GB should be a video about 55 minutes in length. If that's the approximate length of your avi video file, then you're probably good to go.
Have you brought the QT file into FCE? Did it behave properly?
FCE's learning curve IS pretty steep. You'd be wise to invest in some training material. Two excellent choices:
Final Cut Express Editing Workshop by Tom Wolsky (frequent contributor to this forum, as you can see)
http://www.amazon.com/Final-Cut-Express-Editing-Workshop/dp/0240810775/ref=pdbxgy_b_imgb
Apple Pro Training Series-Final Cut Express by Diana Weynand
http://www.amazon.com/gp/product/0321534670/ref=s9subs_gw_s1_p14_t1?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=19PDS2PH8BMSV6X S8GHT&pf_rd_t=101&pf_rd_p=470938631&pf_rdi=507846

Problem with importing JPEG into Flash

Hello,
Im using Adobe Flash CS3 PRO. I don't know what's wrong..when I try to import photos into the stage the photos get resized.
My photographs are 550px by 413px. I set my stage to the same size. Then I go to import to stage. I click import as a sequence. All the photos are appear smaller on the stage. They are only about 200px
Why is it happening?????
I am basicaly trying to import a sequence of photographs for my stop motion animation. Do you have any suggestions?
Thanks for helping!
Lucas

I don't know the why of it. I don't have this problem most of the time, but I have heard it come up before--I don't remember the solution though. It may have involved importing the image into something that is already scaled smaller.
Anyways, here's a couple of things to check while waiting for someone who might know more to come along.
First, select one of the images and select Modify -> Transform -> Remove Transform. If the Remove Transform option is grayed out, then nevermind.
If that didn't do anything, try dragging one of the images out to the stage from the library and see if it is the proper size.
If you have a ton of images, it's likely that neither of the two things above is an attractive solution anyways.

Importing .mov into FCE

Hello, I just installed Final Cut Express to try and edit videos I capture through the Kodak Zi6 handheld video camera, but when I try to drag and drop into FCE I get an error message saying "Unknown file"?
Any ideas? thanks.

See this thread:
http://discussions.apple.com/thread.jspa?messageID=9074060&#9074060
The Zi6 is not directly compatible with FCE, you must first convert its files to something FCE understands.

Unexpected Audio Dropout After Importing MP3 Into FCE-HD

I've imported a song into a FCE-HD project, but after rendering it, I keep hearing tiny breaks in the music. I went back and played the original mp3 in iTunes... perfectly clean. I'm up against a hard deadline today. Any ideas?

Matthew
Mp3 is not the format FCE likes.
Use iTunes to convert the song to aiff format that has the same audio rate as the FCE sequence. That's either 48 or 32 kHz.
Al

Importing JPEGS into FCE 'unexpect quit'!

Similar Messages

Maybe you are looking for