Importing jpg files into an appleworks document

I have downloaded several pictures from my canon powershot camera to my mac mini and can view them with no problems. But when I try to import one of the image files into an appleworks doc, the file name is gray. How do I import a pic? They're jpeg files, I think, the extension is .jpg Isn't that compatible with appleworks?

Welcome to Apple Discussions
In the Open dialog box, you need to set the Document Type to All Available. By default, only AppleWorks files are available.
Peggy

Similar Messages

Why can't I import .jpg files into PRE 9 slideshow project?

I have a Windows 7 computer and use Photoshop Elements 9 and Premiere Elements 9. I recently completed a slideshow for my father's 90th birthday in Photoshop Elements that contains about 360 photos, 12 songs/partial songs, and lasts 24 minutes. My intention is to burn it to a DVD so that it can play on Windows and Mac computers, as well as on televisions in DVD players.
When I tried to import the project into Premiere Elements I got an error message: "Adobe Photoshop Elements Slideshow Import Error: Following file formats could not be imported in Adobe Premiere Elements - .jpg."
From a little digging I have done I saw a post that said that my photo files have to be: 1) 24-bit RGB color, and 2) no larger than 1000 x 750 pixels. If this is true, then many of my photos have too many pixels, which must be causing the error message. Does anyone know if this is correct? If so, is there any way that I can fix my problem without going in to each photo file and reducing the size of the pixels/file? I am also wondering if upgrading to the most recent versions of Photoshop Elements and Premiere Elements could help me. Thanks very much in advance for any advice or suggestions.

welcome HarleyQ to the  boards ...
avi and mov are socalled containers, some say "wrapper"; inside such a container are all kind of "codecs" (formats...)
iM is meant to work with miniDV camcorders; these use a codec called dv..
so, iM prefers a dv (inside a mov.. or an avi, if the file is made on a PC...)
QTpro allows you, to look inside an avi (or mov), and looking for the used codec; QTpro also allows the conversion of many codecs into dv.. but not all; you can teach QT new tricks, by installing plug-ins, codecs for divx, wmv, ...
goto www.perian.org, and install that plug-in.. probably, it helps to handle your avi................

Merging multiple JPG files into one Preview document?

I currently have 6 jpg files that display the next 6 months of my work rota. Is there a way I can combine them all into one file that opens up in Preview?

You can use Automator. Start with a Get Selected Finder Items, than add a New PDF from Images Action. Set the parameters you wish, then select all the jpg in Finder, go back to the workflow and run it.

Getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

Without knowing anything about your system, your image file, your working document and so on nobody can even begin to guess. The file could be damaged, there could be color management issues at play and what have you...
Mylenium

Import a .eps or .ai files into a Pages document?

Does anyone know of a way to import .eps or .ai files into a Pages document?

I tried it again with a new EPS file from the web and drag'n'drop worked fine.
After some testing, I suspect that Pages doesn't like encapsulated postscript files that don't have a preview inside, or perhaps old embedded fonts are related; I honestly don't parse EPS that well, in my head. I hope the preview thing isn't true as that's kinda anti-EPS, but I'll likely not dig further in this case.
Full disclosure; the header did have some random garbage in front of the file, but it didn't seem to be interpreted <≈–”∆ {πôπX ˇˇ%!PS-Adobe-3.0 EPSF-3.0>
So, it seems I was wrong with my discrete example and it's as easy as drag and drop, if everything is up to date for flookoco.

How to Import XML file into SAP B1

Dear All,
I have a scenario like,
I am receiving a XML file from a 3rd party application for the daily Creation,Update of Item Master,BP Master, Marketing Documents. I want to import this file into SAP B1 through its approp objects. I understand DTW has limitation in its file types (Semicolo,Tab,Comma,ODBC). How do i do this ? Please guide me.
Thanks,
Thanga Raj K

Hy folks,
I´m frim Brasil and I've been studying the tool EFM (Eletronic File Manager) to learn more about it!
There I saw that we can extract to XML "any" infomation from the database we want, mainly through the GEP.
However, as I've seen, this Add-On can not import any XML file into SBO, unless for the BFP wich can be imported in conjunction with the BTHF Add-on.
So I ask: how is it possible to import XML data into SBO database? Is it possible to be done through the EFM? or it´s really necessary to write a code specifically to do that?
Besides, I know that de B1iSN fit to this necessity... but when I tried to use it, by the custom "object" for BP, for example, there are some data wich the mapping conteined in this custom "process" that can not be imported... I tried to understand how to map those other fields not imported by the custom but this has been dificult to me as I am a implementation consultant focused in administrative process not on development...
Could you please help me with this subject!
Thanks a lot,
Denis

Can no longer import Word files into InDesign

Hello,
For many months I have been importing Word files into InDesign CS3 (Mac OSX 10.4.11) with no trouble, but I started having a problem yesterday.
When importing a 17-page Word file with 16 footnotes, I got none of the text and only the footnote numbers. This is what I get in InDesign:
12345678910111213141516
(Endnotes)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
These are the things I've tried already: restarting, deleting preferences, changing the import options, using CS2, importing someone else's Word file, importing a Word file that I imported successfully a couple of months ago. None of this works.
It has been suggested that I save the Word file as rtf, but since I have 200 files to import and I'm using Word's character styles for italics, bold, small caps, etc., I'd rather try to fix this problem.
Can someone help?
Thanks,
Tina

I am using indesign CS2 and i'm trying to import a Word document into a new chapter for a book i'm laying out. it's about 30 pages, but there are at least 80 foot notes. i'm able to get about 1/2 of the document with the footnotes to flow correctly, then EVERYTHING disappears. the only way i've been able to get the remaining text to appear is by adding characters to the text. i'll hit "vvvvvvvvvvvv" a bunch of times and "magically" a little chunk of text and it's footnotes appears. then the ole disappearing act happens. so i do it again. i'm able to get all the text to appear finally, but when i delete the "vvvvvvvvvv" from the places i inserted them, the text disappears again. i have no idea why this is happening or how to fix it. any ideas?
thanks so much,
travis

Cannot import PDF files into iPhoto 4.0.3

Is it possible to import PDF files into iPhoto 4.0.3? I can't drag and drop them into iphoto folders without the "Unreadable Files" error. I have tried importing them through the iPhoto menu and still get the same results. I have tried importing the PDF files from several places such as my desktop because I wondered if the location of the original made a difference, but that doesn't seem to help. I didn't find anything when I searched for this problem here in the forum so I wondered if anyone else is having the same problems.
Any help would be appreciated.
Thanks,
Morgan

No because I had iPhoto 4 open and tried to run the Save PDF to iPhoto on a book in that library. I think it's just the different data structure, etc.. It's just not compatible with Automator or at least that particular workflow. I tried printing to PDF from V4 and then do the Save to iPhoto from Preview with V4 open and I still get the error message. So iPhoto 4 is just not compatible with that workflow.
A workaround is to create a PDF file of the whole book and then manually save each page as a jpg file and import those. That's what I did for my first book. You could do a screen shot of each page in the preview mode and use those but the resolution will be limited to screen resolution, 72dip. You will get resolutions on the order of 150-200 dpi thru the Save As route in Preview or the Save to iPhoto automator method.
I'm sure you could create an Automator workflow that would take the PDF file and save each page as a jpg file and name it sequentially. I'll have to take a closer look at Automator soon.

PrE 11 will not import .jpg files from organizer

Hi,
I just upgraded from PS & PrE 8 to the lastest version 11. I'm running on a Windows 7 pc. My catalog was successfully converted and new pictures were added. I now want to create a dvd with both pictures and videos. I tried various ways to import .jpg files in PrE but some (most) of my files will not import. I get error messages about the files not being supported (missing codex) or the files being too large.
After reading on the forums and on Adobe help site. It seems opening and resaving the files in the organizer fix this. I try and it worked. As I have many files to import (200+), I wonder if there is a way to do some sort of a batch process for all file.
Secondly, also I read PrE can automatically resize the image file to the project size. How can this be acheive ?
Thanks for your help

Please see my answer to this question. It's essentially the same answer I'd give you.
http://forums.adobe.com/thread/1129183?tstart=0
You can not create a playable DVD or incorporate video and photos in the same project with full resolution photos on it. Video resolution/TV resolution is only 720x480 (standard resolution) or 1920x1080 (high rez).
Premiere Elements has a governor that limits the size of a photo you can add to a video project (which is probably what you're running into). In fact, you'll get much better results if you use LOWER resolution photos in your video project -- 1000x750 pixels for DVDs and standard resolution video and 2000x1500 for BluRays and high-def video.

Can I import html files into Buzzword?

Can I import html files into Buzzword?

Thank you for your post.
Buzzword lets you import Microsoft Word (DOC, DOCX), plain text (TXT), Rich Text Format (RTF), Word 2003 XML, and Open Document Format (.odt) files. (Font substitution and other formatting changes sometimes occur on import, depending on the content of the document.) You'll need to convert your HTML file to one of the supported file types before importing to Buzzword.
Kind Regards,
Michelle

Importing PDF files into iPhoto

I seem to remember being able to import pdf files into iPhoto; now I am unable to.
When I click on the pdf option in Print, "Save PDF to iPhoto" is one of the options given. If I click it, and try to save pdfs to iPhoto, I get a dialog box asking me to choose which album to import to. Whichever one I choose, I get an Applescript error, "file/private/temp/etc.etc.jpg was not found (-43)" .
If I create a pdf and drag it to iPhoto, I get an "Unreadable files" dialog box telling me "The following file could to be imported. (The file is in an unrecognized format.)"
And if I try to import via File––>Import, the pdfs are all greyed out.
Any suggestions?
Would upgrading the OS to 10.4.5 or the iPhoto to 6.1 help? I'm temporarily abroad, and don't want to screw up the laptop if I can avoid it.

luba:
That's been a bug with the Automator workflow ever since it's been introduced. Be sure to post that fact at the iPhoto feedback page: http://www.apple.com/feedback/iphoto.html.
I wanted to create a slideshow of a book that I created but had to open each page of the book and do a Save As, picking the jpg format, to be able to do what I wanted.

Can i import .sql file into oracle apex?

i'm new to oracle apex....
Can i import .sql file into oracle apex?
i've to import a table into apex...
what script i have to write into the .sql file....
pls help...
Edited by: 794244 on Jan 31, 2011 9:31 PM

Hi Mahesh
Navigate to the APEX documentation page - all the documents are listed there ;) (including direct links to the step-by-step "how-to's" - great stuff)
http://www.oracle.com/technetwork/developer-tools/apex/documentation/index.html
Enjoy the wonderful world of APEX!
Mike

How do I convert an Adobe file into a word document?

How do I convert an Adobe file into a word document?

What type of Adobe document are you trying to convert? Which Adobe software or service are you utilizing?

Embedding SWF file into an Indesign document and later export as PDF

Hi to everybody,
I am searching now since 3 days for good solution of my problem. First I wanna tell you that the problem is not just to convert a swf-file into a pdf. I did this many times with all animations, page flip and stuff.My situation is the following:
I have varios catalogues with more or less 12 pages each in an indesign format. Now I created an animated scroll down menu, which appears on an "index-page". On the menu I created buttons. One button for each catalogue. So the idea of the whole thing is to open a document and an index page appears where you have the animated menu and you choose the catalogue you wanna see. Until here it is quite easy. I created a swf file of each catalogue with my animations (as the special page turnover e.g.). So that I just need von Object in with I can load the different swf-files of these catalogues. I already did the process. I linked the buttons to the different swf files and so. So the problem is now when it comes to convert the whole thing into a PDF. Of course I convert it first to swf and then to PDF. After converting it to swf it works 100% fine, but in PDF not, suddenly the swf-files of the catalogues disappear.
So the summary is, that I don't know how to embed swf files into an indesign document, creat buttons and interactions next to swf file, then save it to another swf, and then to a pdf without losing the first swf files within the pdf.
Hope I made my self clear would be too nice if someone could help me or if someone may have a better idea of realizing the whole project.

Jeffrey,
Thank you for the answer. As you have written:
I will also add that the ID's play mode contol [plays once] [repeat play] does not always control the file once in Acrobat.
I presume you mean version of ID older than CS4 or version of Acrobat Reader older than 9.1
It that is the case I will strongly recommend my visitors to upgrade to this version.
I hope that would work.
Thanks again.
Peter

Problem importing ics files into iCal

Importing ics files into iCal is the problem, but first here is the background on why I'm trying to import.
I have an iMac and iPad, and recently changed my iPhone 3G for an iPhone 4S. Having got the iPhone 4S I have now set up all my devices to use iCloud. In moving iCal to iCloud an extra calendar was created "automatically" in iCal, called "Me". This "Me" calendar contains a partial duplicate of my main calendar, which is called "My Calendar". In fact, some of the events from "My Calendar" seem to have been moved to "Me", and some have been duplicated.
It seems as it I now need to merge the "Me" and "My calendar" calendars to get back to where I was.
I have tried to export one of the calendars and then re-import it into the other. The export seems to work fine, but every single time I try to re-import the ics file iCal crashes at the end of the import process, and the import is not completed.
Can anyone help? This has been driving me absolutely crazy today!
I even tried manually moving events from one calendar to another, but they reappeared. I think this was because my iPhone/iPad were re-syncing via iCloud and overwriting the changes I had just made.
I don't mind if I end up with one calendar with duplicates as I can remove them with iCal Dupe Deleter.
Or if there are any other alternative solutions I'd love to hear them!
All help greatly appreciated!
(P.S. Is it just me, or is Apple software slowly getting as unreliable as Windows used to be? I get more problems with software updates now than when I first got a Mac about 8 years ago!)

Not a great answer but I dragged the attachment either to the finder - app - ical or the icon. It placed it on the calendar. I clicked in and accepted. So, no auto populate. Need to drag and drop. So glad I paid the 20 bucks to upgrade to 10.8

Importing jpg files into an appleworks document

Similar Messages

Maybe you are looking for