Importing leaves me with audio a few seconds off and I still have to render
When I import the last few times, I have to render the sequence after wards. this means that I cannot edit from the sequence in the file. Frustrating! Also, my sound is always a few seconds off after I import. So I have to shift the sound or the video over to match.
Anyone know why is this happening?
FCP 5.0.4
That is all the details that I can think of putting up. Oh and I have 400gigs available on my drive if that makes any difference.
Also, i just digitized again, but only for one minute of footage and it was fine. So I cheered and said yahhhh! So then I went to digitize the entire one hour tape again, and the sound is still off.
so I though maybe it drifted because for some reason it didn't record at the same rate. But the beginning is off by the same amount as the end and middle. I just don't get why this is happening. I export and save the sequence, I can then edit from the browser, but it is my understanding that I will lose some quality that way.
So, until I can figure this out, I'm stuck with editing by browsing the footage in the actual timeine instead of the browser. eeeeeek!
Similar Messages
-
Mts files cannot imported with audio in pro cc6. how i can import mts files with audio?
when i am importing mts files in pro cc6. every time it is being imported without audio. though original mts files have audio. how can i import mts files with audio in cc6?
To clarify Media Browser suggestion - very important that you copy ALL content from SD card to hard drive before importing using Media Browser. If you only have the .mts files alone, there is stuff missing that is needed for Premiere to properly interpret the video/audio.
Thanks
Jeff Pulera
Safe Harbor Computers -
My Acrobat suddenly doesn't open. It asks if it can, then I click yes, I see the circle for a few seconds, then nothing. Anyone have any ideas?
I tried removing then redownloading, still the same.
Any help would be appreciated.Hi,
Do you also have any CS6 products installed along with Acrobat XI Pro?
Regards,
Anand -
NTPD sometimes sets my clock a few seconds off
Hi, whenever I look through my system logs on Console I have noticed a few times that NTPD seems to sometimes set my clock a few seconds off. I have a couple snapshots of the log files if it helps. I also ran an extended apple hardware test and told me that my mac had passed the test. What do you guys think and is there something wrong with my mac? I have a 15-inch macbook pro running Mac OS X 10.7.5
Close all apps in the multitasking bar. (press the home button 2x, hold an app and tap the minus symbol)
Restart/Reset/Restore your iPod. -
My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!
Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace -
When I try to install an Add-on, it loads completely and then says "A few seconds remaining" and never progresses. My connection and computer are working fine. I have the latest version of Firefox, it is up-to-date. I am getting this Add-on for the mozilla website, what do I need to do differently?
It is possible that anti-virus software is corrupting downloaded files or is interfering otherwise.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See:
*http://kb.mozillazine.org/Unable_to_save_or_download_files
You can set the pref browser.download.manager.scanWhenDone -> false -
Liar Firefox: I have download and install Acrobat Reader 11.0.0 few minutes ago and Firefox still telling lies that Acrobat has in not current version.
Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
See here:
Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
Let us know how that works for you. -
Audio is set to off and I can't activate (box is grey - inaccessible)
Hi,
I've updated to 10.8. Ever since there's no sound available. Audio ist set to "off" and activation box is grey and inaccessible. Does anyone have a suggestion to solve this problem?
Have an iMac with OSX 10.8
20"
2,66 Intel Core 2 Duo
4GB RAM
350 HDMost likely you'll need to call. It sounds like that line is designated as the primary line. Should be an easy quick change.
-
i bought htc 8x verizon employee edition and when i update it and during installation with my error phone get off and now phone stuck on some wheel running thing and wont get on please tell me if i could download the rom or anything also
Hi mnomi! Sorry to learn of the trouble you're running into with your new phone! Have you already switched the device via your My Verizon : http://vz.to/16lkVUY Once you have done this, and verify the sim card is inserted securely, the activation will begin. If the phone is stuck on the wheel and you cannot move forward, you may want to do an alternative reset. Please follow the below instructions:
1) Ensure the device is powered off.
2) Press and hold the Volume Down button (located on the right edge) until instructed to release in step 4.
3) Press and hold the Power button (located on the top-right edge) until the device vibrates (approximately 2 seconds) then release.
4) When the restore screen appears (exclamation mark), release the Volume Down button.
5) From the restore screen, press then release the following keys to initiate the reset process:
1. Volume Up button
2. Volume Down button
3. Power button
4. Volume Down button
*Allow several minutes for the process to complete (rotating gears appear on the display to indicate that the reset is in progress).
If you have any further questions or concerns, please let us know. Keep us posted if this resolves your concerns. Thanks!
-KristieQ_VZW
Follow us on Twitter @VZW Support -
I mistakenly deleted all browsers from my laptop in an attempt to start clean with the newest version of Firefox. I still have Firefox on my desktop. How can I copy it to my laptop?
Re-installing the Firefox browser is fairly easy. For most users the important part is the information held in the [[profiles|profile]] including bookmarks and passwords.
If you remove personal settings it is almost impossible to get them back. You can however [[what is firefox sync?|sync]] between computers, and that effectively clones your bookmarks etc.
If you have not already removed setting do not do so now, some of that info may be recoverable. -
good day my question is , does anyone of you experiencing when making a call with facetime the phone shuts off and restart
See this veeeeeeeeeery long thread.
https://discussions.apple.com/thread/3404857
It's an issue with hundreds of phones. Some claim it's software related, some hardware, some say it's a mixture of both.
Some people have had temporary success with quitting the Phone.app / restoring as a new phone / restoring from an iCloud backup / disabling Siri / toggling speakerphone on & off...
Unfortunately all of the above only been temporary, with the problem recurring again after a few calls, or a few days etc.
So far the only solution that seems permanent has been to replace the phone. But even so, it's the luck of the draw to recieve a functional phone, and not another faulty one.
I'm completely annoyed as there is no Apple Store near me...... and Apple haven't even acknowledged the issue, despite the above thread being 34 pages long, as of writing. -
OK, here is my problem...i leave my ipod classic charging for 2 days and it still has the 'Please wait, very low battery" sign! what should i do? Please answer!
When you connect the iPod to the adapter or PC, you should see either of these signs on the iPod Screen .
If you just get
It may mean that your Adapter is not giving enough juice, because
the adapter or the cable is defective or
your bottom dock connector is dirty with lint or dirt.
Have a nice day! -
i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns -
If I make a new iTunes account with the same credit card number can I still have the same thing I bought from my other account?
Not without buying them from the new iTunes Store account.
(84283) -
My main PC with my Itunes Library just crashed. I still have all my music on Apple TV, Ipod Touch (Gen 2), and Iphone 4 (verizon). How can I get everything set up on a new PC and working ?
I downloaded Itunes 10.2 on new desktop, ran sync with my ipod touch (Gen 2) and have all my music on new PC. Just can't get it to sync with my Apple TV (Gen1). I have made music purchases on Apple TV and cannot get them to Ipod/Iphone? Help
Maybe you are looking for
-
Creation of Sales order from Purchase Order ( reversal of SO-to-PO)
Dera friends My client has two companies ( two company codes.EPC & EPM) EPC- Gives PO to EPM EPM will supply the goods. So EPM will accept the PO and send the SO to EPC Both the companies are in same client ( 100) My client requirement is : Once they
-
Triggering END_OF_PAGE IN CLASSIC REPORT
Hi Experts, I have one classical reporting in that END_OF_PAGE is not Triggered At last Page due to Less No of Records in last Page,can anyone tell me how to trigger END_OF_PAGE . i want to display the page total for every page
-
Mixing Image Qualities in a PDF
I have a document I created in InDesign. I and I would like to export for viewing on the web. My problem is, when I export it using the standard preset, the images I want to be sharp are blurry. When I export it for High Res Print, the 52 page file b
-
hii all i have following problem in smartform for invoice printing, i have 2 fields called total_prd_val for product value n RATE for rate pet unit , this 2 fields can hold only one value at a time. now i have invoice which contains 4 diff products o
-
I am trying to change pixels to 1920x1920 in iphoto. I used crop, custom and it change. When I looked at my photo information it was 2000x2000. I have tried numerious times to no avail.....! I need the 1920 specific size for art show jurying. L