Importing m4a files in fcp

I am making a movie in fcp an need to import music. M4a files do not import. Why? And what do I need to do?
PowerBook G4 Mac OS X (10.4.8) 2GB - 100GB Hard Drive

I did convert to AIFF in iTunes and still sayswhen trying to import (File Error:1 file(s) recognized, 0 access denied, 1 unknown) Also when importing, it says readable files and my files are not highlighted. Only when switching to all files I have access to them. But that file error appears as above.

Similar Messages

Not able to import .motn files into FCP

For some reason I'm not able to import .motn files into FCP. While in FCP, I use "send to motion" and uncheck the embed box. After motion opens and I add my motion content, I get the following error when trying to import the .motn file back into FCP "File Error: 1 files(s) recognized, 0 access denied, 1 unknown". What is strange is that I'm able to create another test FCP project with different media, and everything works fine. All tests and media are done on the same drive.
I'm using the latest updates of everything FCP 5.0.4 and motion 2.0.1
Any ideas anybody?
Thanks!
G5 Mac OS X (10.4.6)

Check the frame rate - that can sometimes interfere...
Patrick

Importing Motion Files to FCP

I've searched for this problem and have yet to find a thread with a conclusion - please point me in the right direction if I've missed it.
I'm running Motion 3.0.2 and FC Pro 6.0.6 along with OS 10.4.11. I'm due to upgrade all these asap - but as I'm in the middle of a long project I'm holding back. I've never been able to import Motion files into FCP either by using Import or dragging into the browser - I get a "File Error: Unknown File" message. Instead I make a QT file and work on that. Usually I don't have many files in a sequence so that's never really ben a problem.
However, I've now putting together some much longer sequences and it's a pain when shots need tweaking to have to re-make QTs each time.
I've trashed both Motion and FCP preferences without luck. I have Snow Leopard sitting waiting to be installed. Could that fix the problem? Does anyone have any suggestions?
Thanks in advance.
Andy

hi,
seem to remember someone else having this problem, have you repair permissions etc on your system. Can you double click a motion file for it to open from the Finder. Does the Finder know they are Motion files and should be opened by Motion? er can't think of anything else
adam

If I actually import full files into FCP, can I then drop source files into the trash?

If I actually import full files into FCP, can I then drop source files into the trash? I'm editing now and want to free up HD space.

Just to confirm: in Preferences, Import, Files..."copy to library storage location" is selected.
So I assume I can dispose of source files.
Thanks for quick reply and also the the cautionary note.
This is low-level family footage I export to .mov and share on YouTube, so originals are not critical.

Importing QT files into FCP

Hi there I'm a FCP newbie,
I 'm trying to import QT files into FCP, I extracted two files off a DVD using handbrake tp MP4 format and then opened them with Quicktime Pro and compressed them as a QT.mov. One of the movies imported successfully into FCP the other did'nt, and the error message I file recognized (0) access denied 1 unknown. Note I have used exactly the same compression settings for both files, any help would be appreciated.

MP4 is a delivery codec. To make things easier, use MPEG Streamclip to do the DVD extraction. That will extract the video directly into a Quicktime movie file which FCP can edit natively.
MacBook Pro 2.33GHz/2GB RAM/160GB HD/256MB VRAM Mac OS X (10.4) Apple Pro Certified, Final Cut Pro 5-Level 1

Having Problems importing XML file from FCP 6 onto a FCP 5 application

I have a project file that i worked on FCP 6 and wanted to move to FCP 5 app. on a different Pro Mac but when i try to import the xml, it prompts me to "Please choose a Translation Document File". I choose the FCP 6 project file because i wasn't sure what to choose and i get the ERROR: No translation templates matching the selected XML file were found. Unable to import this file.
any ideas?

make sure you exported your XML from FCP6 using a compatible XML version (1, 2 or 3) ... version 3 would make the most sense as its the most recent FCP5 compatible version .... don't export using version 4 (the default for FCP6), that one is for transfering projects between different installations of FCP6 only

Import m4a file without metadata

Using latest itunes 11.0.1.
While it is possible to import a wav file without metadata it seems not to be impossible to import a m4a file without metadata.
The wav file will be stored under "unknown .." folders and displayed in the itunes windows. Now metadata can be added
via itunes "information".
Does anyone know how to achieve the same with m4a files?

there's no exclude data in 9i you have to use normal export/import with option called row=N like the above post said .
if you need more help about export/import use
exp -help
imp -help

Can't import audio files in FCP after snow leopard update

i've recently updated to snow leopard. and i'm running Final Cut Pro 6.0.6
i opened a .fcp project i created a long time ago. i tried to import a .aif file and final cut crashes. i converted the .aif file to a .mp3 file. tried to import it, and final cut crashed.
i then went and deleted the preference files for final cut pro, reopened final cut, tried importing both files again, it still crashes.
does anyone have a legitimate answer for why this is happening?

BenB wrote:
1st, FCP does not officially support MP3 audio files, so don't even use them. I'm running FCP 7 on Snow Leopard, no problems with audio files.
1- How are you encoding them? What software is creating these files?
2- Are you running on an external FW800 drive?
3- How much RAM are you running?
And as my final observation is, NEVER run Final Cut Pro 6 on Snow Leopard! Huge no-no! If you upgrade to Snow Leopard, only use FCS3. I've updated lots of systems for my students and clients, and I've seen lots of FCP6 on SL problems.
Message was edited by: BenB
I agree that you shouldn't use MP3 files with FCP, the manual tells you that somewhere If I recall properly, but it shouldn't cause Final Cut to crash, at least that has never been my experience, it has just caused a skipping problem, or not playing the complete song.
I don't really understand wht a FW800 drive or the amount of RAM have to do with it, it would sure be interesting to hear your comments on that.
However, in all due respect, to make the statement that one should NEVER run Final Cut Pro 6 on Snow Leopard seems pretty "out there" would you be so kind as to provide your rationale for such a drastic statement as that. Has there been anything official from Apple along those lines?

Cannot import video files into FCP

Every time I try to import a file (.mov , .mpg , .m4v) FCP gives me an error message reading "File Error: File Unknown" If I try and import through the drop down menu, the error reads "File Error: 1 file(s) Recognized, 0 access denied, 1 unknown"
The only file that seems to work is a .avi
This started happening when I upgraded to Snow Leopard.
Please Help

Here's a couple solutions ...
I had this problem this week as well. Suddenly I couldn't import any type of media into FCP. After trying a few things like reinstalling FCS 2 and talking to other people, I called up Apple Support. They walked me through a few more efforts to solve the issue or at least get an idea of what causes the problem.
What we discovered is that when I created a new user profile for my iMac and logged into that profile, everything in Final Cut worked fine. I could import media with no problem. THUS, the issue seems to be connected to my computer profile. So I was presented with two options:
Option 1: Create a new user profile and either migrate all my content over to it or simply edit from that profile.
Option 2: The Nuclear Option. Back up all your content you don't want to loose, pop in your OS X disk, restart the computer holding C, and select the option to erase your hard drive and install OS X from scratch.
I figured that after two years of a **** of a lot of editing and other work on this computer, it was time to just go for the Nuclear option and obliterate everything off of it and start fresh. Takes a while to do, but I've just confirmed that I'm able to import media again in FCP.
So, sadly it's not a real simple option like deleting your preference files, like other FCP issues, but there is way to clear up this issue. The important thing to note here is that reinstalling FCP didn't work for me, and doing an Archive Install of OS X which still keeps my user profile essentially intact also keep the problem intact and solves nothing.
Now, if you have to get a project your editing out the door right away, just create a new profile and get busy editing. But once that project is done, or if you have the time right now, I think the best option is the Nuclear Option. Back your stuff up and then clear your hard drive out and start anew.
I hope that helps guys. I know how crazy I was going not finding anything on a forum to help me out.

Trouble importing .mov files into FCP X

I'm relatively new to FCP so this could be a really easy fix. I took a bunch of short video clips (20s --> 1.5 min) on my Panasonic ZS25 and imported the clips to my MacBook Pro (2008 with 2GB 1067 MHz DDR3 Memory and 2.26 GHz Intel Core 2 Duo Processor). [I have version 10.8.4 of OSX]. The clips from my camera were in .mts format so I used the Smart Convertor Pro App from the App Store to convert all 80 files to a .mov format. Both the converted clips and FCP X are stored on my 700 GB external, and while I tried to import the clips into FCP X, the program almost immediately froze and shut down. Thinking I "overloaded" (for lack of a better word) FCP X, I decided to try and delete the blank clips that were showing up in the program. However each time I attempted to click on a clip the program crashed again. I eventually was able to delete all the clips, and decided to move the converted clips from my external to my desktop. Once they were moved I then tried to import just one clip from the desktop to FCP X (which is still run through my external). Although it was successfully imported, once I clicked on the file to play it in FCP X the program crashed again.
What can possibly be the problem and what can I do to fix it?
Note: This is my first time using both my new camera (and having to deal with this .mts BS) as well as FCP X.

Thanks Russ, Tom, and Hughmass for all your input. It really is appreciated. Unfortunatly even after moving FCPX to my desktop and converting the .mov files in MPEGstreamclip, importing the movie clips into the program still causes random shut downs. Perhaps the clips are corrupted or something? I honestly don't know, and I'd rather kind of just ignore this problem then keep hashing away seeing as the clips aren't that important (and yes, being super smart, i deleted them off the camera well before hand).
Just to make sure FCPX works, I took some short clips on my Panasonic DMCZS25, and imported them successfully into FCPX and was able to edit together a quick piece. Thanks again for all your help!

Importing mpg files into FCP

A client brought me their external HD, and I am seeking to import footage into FCP. The video comes across fine, but their is no audio...what am I missing here?

You can't work with MPEG files in FCP. Yours also have multiplexed audio which is why you can't hear them.
You need to convert the files with [MPEG Streamclip|http://www.squared5.com]
See my MPEG Streamclip tutorials: [Part One|http://discussions.apple.com/thread.jspa?threadID=2059475&tstart=0] and [Part Two|http://discussions.apple.com/thread.jspa?threadID=2070861&tstart=0]

System settings for imported p2 files in fcp

Hello, Everyone
My name is Jackie and I am new to the apple disciussion forum. So I hope I am doing this right. I need help exporting my Project. Currently I am exporting using Quick Time Movie within FCP and the quality of the files are awful. I understand that my mxf files (footage originally shot with P2 hd cards) are imported as quicktime files but I was under the impression that the quality of my footage would stay the same.I think maybe some of my settings are incorrect just not sure what they should be dvntsc or hdv 720 p60 as far as sequence presets. Maybe I am completly off base. currently I have exported sequences using qt movie in hopes to create a dvd but every time the quality is really fuzzy. Please educate me.
Sincerely, Jackie

Welcome to the forums.
Imported P2 files are the exact same quality as the original MXF files. And the codec they employ is DVCPRO HD. Might be 720p, might be 1080i...whatever format you shot. Zero quality loss.
Exporting for...what? how? You must know tht you cannot judge the quality of the footage on your computer monitor...
#2 Blurry Playback
Shane's Stock Answer #2: Blurry playback
ONLY JUDGE THE QUALITY OF YOUR MATERIAL ON AN EXTERNAL BROADCAST MONITOR, OR AT LEAST A TV.
The Canvas shows you what happens after the codec you are working with has been applied. The Viewer shows you the material in its native format. Once you drop the footage from the Viewer into the timeline, it inherits the attributes of the sequence. If it is a DV sequence, the footage will render out as DV.
1. Disable overlays on the Canvas.
2. Make sure you've rendered everything (no green bars at the top of the timeline).
Video playback requires large amounts of data and many computations. In order to maintain frame rate and be viewable at a normal size, only about one-fourth of the DV data is used in displaying the movie to the screen. However, the DV footage is still at full quality, and is best viewed thru a TV or broadcast monitor routed thru your camera or deck.
TO view your HD files you need to get a capture card and an HD monitor.
Shane

Importing .MTS files into FCP 10

I just purchased a Canon C-100 and am delighted with the results. However, I need to know how to import the .MTS files into Final Cut Pro-10. I have imported the files to one of my hard drives, but FCP-10 does not recognize them.

Hi kennethcnelson!,
Final Cut Pro should support the MTS format. In order to be recognized, the files must be within the identical folder/file structure on the camera.
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Opening/importing m4a files

I have a large number of audiobooks as m4a format files. When I open them in iTunes they appear as music files in my library. Is it possible to set iTunes to recognize m4a files as audiobooks?
Thanks for your help.
Paul.

Thank you, one and all, for your responses. I have already been doing what you suggest, but you have missed the point which prompted me to make this posting: LARGE NUMBER of m4a files (note: LARGE >= 200) - I have halted after 25 or so awaiting an alternative. So back to my original question:
Is there a way of instructing iTunes 12 to recognize m4a files as audiobooks and NOT music (so that I don't have to alter each one's GET INFO>OPTIONS manually)? It seems this is a default in iTunes but I can't seem to see where this might be changed (an ini file, perhaps, or a registry setting?).
Paul.

Error message when importing motion files into FCP

In FCP.
I choose a clip/clips in my sequence. Then choose send to motion project and follow the directions from the training dvd.
By unchecking (embed "motion" content) then save the file with a different name. Then continue with making my graphics over the video clip/clips.
When I am done I then shut off the video layer of the clip in the motion timeline. Then I save the project. Then close Motion and try to import the motion project in FCP.
When I try to import, I get an error message stating "File Error: 1 files(s) recognized, 0 access denied, 1 unknown."
I go back to the training file to try the same procedure and it works fine.
Go back to my own project and it doesn't work.
Any ideas? Anyone?
I have a Mac Pro 2.66GHz / 5 gigs of ram / 512 vram ATI graphics card
Also working with universal software for FCP studio.
Intel 2.66GHz Mac OS X (10.4.9)
Intel 2.66GHz Mac OS X (10.4.9)

OK???
Don't know what the deal is. But I made a new sequence in my project and copied my other sequence with in the new one and then tried to do the whole clip step for step process of send to motion and importing back in and it worked!!!!
I check all the listed settings of my sequence in my browser window and both the old sequence and new sequence are the same.
I am happy that I can move on with my work, yet I am frustrated with the fact that I am not sure exactly what the problem is.
Thank You Again!

Importing m4a files in fcp

Similar Messages

Maybe you are looking for