Importing Maya .ma file problem ?

I import Maya compatible file, .ma that out from C4D plugin CaMaya v1.0. It work out up to now. But I have a Scene with 980 images, and when I import the .ma ( camera ) it dont import all only, like 1 to 550 then the data of the reste is not valide. SO i import and render In two time ... export cam 0 to 500, import cam, render, the import cam 501 to 980 and then render... IS oki I mean, but do any one know if is limitation In Keyy frames in Shake or so ??
Regards,
Michel

Sounds like you have a scoping problem, but without more code
we'd never be able to tell. Do you have your loadvariables code
sitting on the main movie or the movieclip? Are you using classes
to control anything? Most likely, you just need to take a look at
the way you are referencing your variables....

Similar Messages

  • Importing large .m2v files problem

    I am currently using cs3 version of encore and have come accross a problem when trying to import a large (3.1gb)m2v file that was created in PPcs3.
    When I try to import, encore starts to try to import but them suddenly closes down completely. I can import smaller m2v files with out a problem.
    Does anyone have any suggestions?
    my system is Inte duo 2 quad processor QX6800, 4gb ram, GEforce 8800GTX graphics card and I'm using XP Pro operating system
    Ian

    I had similar problems with CS3. This is my research and solution (so far...)
    When outputting MPG files for HD, if you dont do multiplexing in Premiere, it generates a M2V file and a WAV file. Encore basically crashed on every import of the m2v, (irrespective of importing as timeline or as asset) if it was larger than some value (experimentaly around 8GB).
    Someone suggested that it had to do with the XMPSES files. So put the m2v and wav file in a separate directory and import from there (or delete the XMP and XMPSES file). I tried this and it does work, but the chapterpoint information is lost, so in the end I tried to avoid creating >7GB files for import in ENCCS3. However, later with another project, Encore did not even accept 4GB files.
    In the end I found the solution to be to have Premiere generate a transport stream (i.e. a multiplexed file m2t in stead of two separate files for audio and video (wav and m2v)). Get a license for the AC3 encoder, switch on multiplexing and Encore happily imports the resulting files without any problem (until now)
    Hope this helps
    Lucien

  • Import from export files problem

    Hi,
    I am a new user. I installed oracle 10g. I took an export one schema and I want to import back. But when I put "import to export files" , it says "the page cannot be displayed." and I installed another machine, it says same thing. What am I do wrong?

    Did you try to run export/import from commands? or some kinda GUI tool?
    If you use import/export, you can find them from Oracle syntax.
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/toc.htm

  • Import/Batch multiple file problem

    Hi
    I can not seem to import more than one file at a time in the batch window or in the main window. Has anyone else had this problem?
    I did not have this problem before I formatted my pc and installed aa3 again.
    Cheers
    Luke

    Yes thats right. Only one file at a time will work. And when I do it in the batch processing window, only the drive letter and directory appear funny enough, and only one instance of it as well.
    Thanks,

  • Bizarre problem trying to import .MTS (AVCHD) files into PSE7 Organizer

    Hi
    b Summary of problem:
    *I recently upgraded to PSE 7 / PRE 7
    *I am trying to import .MTS (AVCHD) files into the PSE7 Organizer
    *I get a "...did not contain any supported file types..." error on attempted import
    b HOWEVER...
    *I can edit same footage in PRE7
    *This footage is automatically added to the Organizer
    *I can play this footage in the PSE7 organizer but generating thumbnails takes ages
    *Camera: Sony HDR SR12 producing .MTS files (full 1920x1080i HD)
    *PC: Intel Core i7 940 CPU, 6GB RAM, RADEON HD 4870 512MB
    *OS: Vista 64 bit
    b Detail:
    I have recently upgraded my PRE/PSE bundle to ver 7 primarily because the new version of PRE boasts support for AVCHD.
    Having installed the new software I quickly tried editing footage in PRE7 with video taken on my Sony HDR SR12 camera (footage taken in full 1920x1080i HD) and it works! Hoorah! I can now finally edit AVCHD footage in it's native format using PRE. Thank you Adobe!
    But my joy was very shortlived because when I tried to import some other footage from the same batch into my PSE7 Video Catalog it wouldn't work. I got a pop up box containing the following error:
    i "Nothing was imported. The file(s) or folder(s) selected to import did not contain any supported file types, or the files are already in the catalog."
    Under this message is a list of the files that I tried to import. Next to each one there is a reason (it's the same reason for each clip):
    i "Reason: The file is damaged or is a format that cannot be included in the Organizer."
    To import files I use the following method: File / Get Photos and Videos / From Files and Folders
    HOWEVER, the files that I imported directly into PRE7 in order to edit them have (surprise, surprise!) automatically been added PSE7 Organizer's Catalog. It takes a quite a while to generate a thumbnail for each clip but it does eventually do it and when it does I can play that footage in PSE7.
    Just in case you're confused by this stage... If I try and manually add files to the PSE7 Organizer it doesn't work BUT if I edit that footage in PRE7 and then load the PSE7 Organizer I see the footage has been automatically added. This makes no sense whatsoever!
    Am I doing something really stupid here? Why oh why will the PSE7 Organizer not import .MTS (AVCHD) files?!
    NB: While searching for a solution to this problem I have, thanks to this Forum, found out about the K-Lite Codec Pack. I downloaded and installed the Basic pack v4.4.5 and now I can, at least, play my .MTS video files in Windows Media Player... I wish I had found out about that a couple of months ago because it would have saved me from buying Cyberlink PowerDVD 8!
    Please someone help before I lose the plot.
    Thanks
    Patrick
    b PC: Intel Core i7 940 CPU, 6GB RAM, RADEON HD 4870 512MB, Vista 64 bit
    b Camera: Sony HDR SR12 producing .MTS files (footage in full 1920x1080i HD)

    Hi
    I'd just like to add an update to this post.
    b Summary:
    *K-Lite Codec Pack clashes with Sony's Picture Motion Browser (PMB) software
    *Analysis of video in Sony's PMB is well worth doing!
    *You can Drag and Drop clips from Sony's PMB into PRE7
    b Detail:
    As you've probably gathered I have now settled on using Sony's Picture Motion Browser (PMB) to Catalog all my video. Sorry Adobe to talk about someone elses product but the Adobe Organizer just can't cope with AVCHD footage no matter how you manage to import it! It's far too sluggish and my PC has an Intel Core i7 940 CPU with 6GB RAM and a 10,000 RPM HDD!
    Anyway, in my first post you'll have read me raving about the K-Lite Codec Pack but sadly I've had to uninstall it because it kept on causing PMB to crash. PMB runs much smoother and quicker WITHOUT that codec pack. Something about it clashed with PMB. The once agile PMB became sluggish and unresponsive.
    Having now removed the codec pack PMB is back to being agile and generaly lovely.
    To view AVCHD footage outside of PMB I have reverted to using Cyberlink's PowerDVD 8 - there's always a pregnant pause between double-clicking on the clip and it playing but that's the only drawback.
    If you are going to use Sony's PMB for cataloging your video collection (and I recommend you do so BUT only if you have AVCHD footage - otherwise stick to Adobe's Organiser) then I can fully recommend "Analyzing" all of your footage. This takes time and a bit of patience because it kept stopping for no apparent reason but would readily start up again (without having to do anything else) BUT once it's done it'll reward you with the following:
    *Filter on any combination of Scenery, People, Smiles - e.g. with a click of a button you can isolate footage that contains smiles, etc
    *Face Search - if you select some or all of the footage in the right-hand pane it will then put a small thumbnail for all of the different faces in that selected footage in the bottom "Face Search" pane. If you then click on one of those thumbnails it will jump to the clip(s) that contain that face and grey out all the other clips
    *Expand Videos - This tool is brilliant! In normal viewing mode you get a thumbnail of the video whether you're in Folder view, Calender view or Detail List view. If, however, you select "Expand Videos" from the tool bar it will show you a series of frames contained within that clip. You can choose from "Highlights" or various regular intervals (5 secs, 10 sec, 30 sec, 1 min, etc). The Highlights option does a pretty good job of picking out the significant changes within the clip
    Lastly, I have discovered that you can drag a clip from Sony's PMB into PRE7. It won't let you put it directly onto the Timeline but it will let you drop it into the Project file list (found under the Edit tab).
    I do hope that this info has helped others like me who are trying to get to grips with editing and cataloging AVCHD footage.
    Patrick

  • New problems importing Pro-res files

    Hi,
    I am running CC14 on PC (HPz800 Windows 8) - and I have recently become unable to import Pro-res files into After Effects or Media Encoder. These files DO open in premiere
    I have tried the following:
    Restarted
    Cleared my cache
    Cleared all my appdata settings
    uninstalled and reinstalled latest Quicktime
    reverted back to a previous version of After effects (this is where i noticed the problem first and I had recently got a new update)
    copying the file to a different location on my drive and importing it from there
    Additionally:
    I have had no problems with Pro-res in the past
    The same file works fine on other computers in my office with the same versions of Ae/Encoder
    The video file works in premiere
    The video file plays fine in Quicktime
    I get the following errors:
    In Ae - "this '.mov' is damaged or unsupported"
    In media encoder - "could not be imported. could not read from source. please check settings and try again"
    In the meantime I have re-encoded a proxy using premiere - however this is not an adequate long-term solution
    Not sure what to try next, don't really want to re-image my whole computer (i already did this on a month or so ago)
    Any help is appreciated

    troubleshooting QuickTime errors with After Effects
    fixing permissions problem

  • When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.'  The file is a jpeg and I've never had this problem before.

    When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.'  The file is a jpeg and I've never had this problem before.

    What version of iPhoto?
    What colour profile is the shot?
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Problem in import of MetaData file in Oracle Warehouse Builder 9.2

    My Problem is Related to Oracle WareHouse Builder.My system's configuration is following :-
    Machine : P4
    Operating System :Windows XP
    ORacle : Version 9.2
    Oracle WareHouse Builder 9.2
    Ram :1GB
    SGA Size :Approximately 650M
    I have 2 MetaData files which I have to import into OWB.
    First file's size is 9M.It got imported properly in 4 minutes without any error.
    2nd File's Size is 30M.when
    I start importing this MEtaData file.It goes upto 35% in Progress Bar.But after that it does not show any improvement.
    I have left the machine running with this option upto 24 hours.
    But nothing happened .It still shows only 35%.
    I have checked log file/Trace file/Alert log files ,but there is no error in these files.
    If any body have any solution about it,Please reply ASAP.I am stucked in this problem from last 7-8 days.
    Waiting for reply
    Thanks & Regards
    Harvinder Singh

    Thanks for your reply Igor.
    As posted the OWB 10.1.0 software is running against a 9.2.0.8.0. database, so OWB still uses DBMS_JOB instead of DBMS_SCHEDULER in this database. In addition I already tested scheduling a simple job to run an OS command as suggested in note 365539.1 , and job scheduling is working fine.
    There are no invalid objects in this database.
    Yasmin

  • Problem related to OSS Note - importing file problem

    Hi,
    I m facing an issue while implenting an oss note 430580 , i have to import files from sapserver.
    but i don't know how to do it.
    below is the description of my problem.
    Import the following files from SAPSERV:
    /general/R3server/abap/note.0430580/K000687.PLM
    /general/R3server/abap/note.0430580/R000687.PLM
    Import the two files into your system.
    For more information on SAPSERV, see Note 13719.
    Can any one tell me how can i get rid out of this prioblem.
    whether this is possible or BASIS Team can only do this.
    system details
    Operating system     SunOS
    Machine type         sun4u
    R/3 release 4.6C

    Well, these files are part of the zip.file which belong to the note. This is part of a regular transport and is normally done be basis. The data and the cofile (K....PLM & R...PLM) should be imported into your system. Before doing so they have to be transferred to the file server. Better let BASIS do these kind of things.

  • Problem in importing from dmp file

    Hi ,
    I am facing problem while importing from dmp file on unix server
    Error is as follows :
    Export file created by EXPORT:V08.01.07 via conventional path
    IMP-00013: only a DBA can import a file exported by another DBA
    IMP-00000: Import terminated unsuccessfully
    Export taken was with user xxx@yyy
    import command is : imp xxx/ppp file=abc.dmp TABLES=xxx.table1 ignore=y feedback=500
    please help me out.
    Atul Chougule

    I tried with FROM USER / TO USER , but the result is same.
    $ imp uuu/ppp file=aaa.dmp fromuser=uuu touser=uuu ignore=Y
    Import: Release 8.1.7.3.0 - Production on Thu Jun 15 06:44:49 2006
    (c) Copyright 2000 Oracle Corporation. All rights reserved.
    Connected to: Oracle8i Enterprise Edition Release 8.1.7.3.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.3.0 - Production
    Export file created by EXPORT:V08.01.07 via conventional path
    IMP-00013: only a DBA can import a file exported by another DBA
    IMP-00000: Import terminated unsuccessfully
    I am stucked up ,Dont know what to do .

  • Problem importing a CSV file with forward slashes in a column

    I have an Excel csv file of a product database (contains about 6500 products) that contains product codes with forward slahes such as 499/1, 499/3, 499/5.
    These are different sizes of a product and as such have different prices etc.
    When I import the file into Numbers these numbers appear as 499, 166 1/3, and 99 4/5 respectively.
    What seems to be happening is that Numbers is interpreting the forward slash (/) as a divide by command and subsequently performing a calculation on that number on import and hence totally changing the value of the cell so that it is impossible to look up the price related to a product as the product code no longer exists.
    Excel can import these files with no problems, why can't Numbers treat each cell as text and leave it alone on import.
    Is there any way round this or do I have to revert to using Excel for the import of csv files.
    Thanks
    Steve

    I know I'm a bit(!) late (a year) coming to this party, but there is a simple solution, that worked for me, enclose the field in double quotes, and add a single quote before the number:
    Instead of
    499/1,"Super Widget 3",12.34
    do
    "'499/1","Super Widget 3",12.34
    In fact the single (unclosed) quote without double-quotes works as well:
    '499/1,"Super Widget 3",12.34
    I've always found it better to enclose strings with double quotes. This works on loading the file into Mac Numbers and should work with Excel too if that helps. It opens with OpenOffice 4 on the Mac too - if you select "comma" in the "Separated by" checkbox
    I can't remember where I picked this info up....
    Hope this helps someone, albeit late.
    Andy

  • Problem with the Export/Import Utility when importing a .portal file

    Hi there !
    I got the following error when trying to import a .portal file to a desktop by using the Export/Import Utility.
    <13-11-2009 12:13:26 PM CLST> <Error> <netuix> <BEA-423487> <Import: did not add navigable [2203] as it would cause an illegal dependency.>
    The error is shown several times, starting from the number [2203] until [2285].
    It causes that i can't see some pages of my portal... it's like they dont exist.
    I Hope you can help me fix it, because i have not found any information about it.
    Best regards
    P.D.: I am using the BEA Weblogic 10.0.1 version.
    Edited by: user12231353 on 16-nov-2009 12:38

    I upgraded to cs6 and imported all the images together, I made them 3 frames per and exported them. The problem is slightly improved but still there. I'm still getting flicker.
    Check it out: http://www.youtube.com/watch?v=g_yZjskzTLs
    Black screen version from yesterday if you want to look at it: http://www.youtube.com/watch?v=NCcAEO8YU6Y
    The problem has to be with my settings. when I upgraded it deleted all my prefrences and settings. There was no dslr preset either so I had to redo it all from  scratch to the best of my ability. Here is a complete rundown of my settings:
    I shoot with a canon dslr 60D in 24fps and upload all my stuff in 1080p. Please advice.

  • Having problems importing my .mov file.

    I am having problems importing several .mov files into iMovie. I also can't import .wmv files and I have been utterly confused. I know I have to convert the files but I don't want to pay for a program because I will only be converting 4 files. Please help!

    What is Mpeg Streamclip
    It is a free conversion application that accesses the QT structure and all installed QT components without having to pay the $30 for QT Pro or purchasing GarageBand. It's "engine" is MPEG-based, so it can do some things that QT Pro cannot do ( e.g., retaining audio content when converting multiplexed compression formats). On the other hand, it cannot perform layer operations like QT Pro can so these applications are somewhat complementary.
    and is there anyway you can send me a link to download this program please?
    MPEG Streamclip

  • A problem with importing layered PSD file into Flash

    Hi.
    There's a problem with importing layered PSD file into Flash.
    If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
    If the higher layer has brush or transparent effects, it becomes worse.
    Any help with this problem?
    Thanks.

    How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

  • Import mdl file problem

    Hi ,
    i have oracle 11.1.0.7 on windows 2003 SP2 32 bit , i imported a MDL file created by oracle 11.1.0.6 (windows 2003 SP2 32 bit) .
    i can not run maps correctly and the situation is not stable.
    do i need any patch or do more activity after importing metadata ?
    thanks for your consideration
    Padideh

    Error occurred importing from file "D:\SIGMA PROJ3CT\MIS JAMBI JOHAN 20100622\BPDJAMBI-20100622_0943.mdl".
    java.lang.Exception: CNV0002-0038(ERROR): Cannot write to file ./../../reposasst/converter.properties. Please make sure that write privileges are enabled or that disk is not full.
         at oracle.wh.repos.pdl.metadataloader.converter.util.Utilities.getPreferences(Utilities.java:750)
         at oracle.wh.repos.pdl.metadataloader.converter.WBConverter.<init>(WBConverter.java:372)
         at oracle.wh.repos.pdl.metadataloader.common.WBMDLCommon.<init>(WBMDLCommon.java:207)
         at oracle.wh.repos.pdl.metadataloader.common.MDLFileParserCommon.<init>(MDLFileParserCommon.java:128)
         at oracle.wh.repos.pdl.metadataloader.Import.MDLImport.<init>(MDLImport.java:338)
         at oracle.wh.repos.pdl.metadataloader.Import.MDLRunImport.instantiateMDLImport(MDLRunImport.java:383)
         at oracle.wh.repos.pdl.metadataloader.Import.MDLRunImport.internalRunImport(MDLRunImport.java:424)
         at oracle.wh.repos.pdl.metadataloader.Import.MDLRunImport.runImport(MDLRunImport.java:503)
         at oracle.wh.ui.metadataloader.Import.MDLUpgradeImportTransaction.internalRunImport(MDLUpgradeImportTransaction.java:218)
         at oracle.wh.ui.metadataloader.Import.MDLUpgradeImportTransaction.run(MDLUpgradeImportTransaction.java:319)
    I've a problem with this issue .. i think this issue because of only privileges matter .. but it's not .. could anybody help me out of this issue ?
    Thank so much before. GBU.

Maybe you are looking for