Importing Media With Pro Extended 9

I have installed the Pro Extended on my PC (Trail version)
and have imported media (mov.) files successfully and can play the
media back on the Pro extended version on my PC however when I save
the file to my memory stick and test it on my lap top with win XP
and installed reader 9 the file will not play the imported media.
Is this a trail issue or am I missing something?

Similar Messages

Cannot see shared comments in Acrobat Pro Extended

If I use Adobe Reader 10 to look at a shared review PDF, I can see a screen asking me to CONNECT. And when the PDF is open, I can see all the comments with the "Check for new comments" button at the top left side of the PDF file.
Now they installed Acrobat Pro Extended for me the other day. When I open the same review PDF in Pro Extended, I do not see the CONNECT screen, and I do not see any comments. What's wrong with Pro Extended? Why is it not working? Any help will be greatly appreciated.
Thanks,
Brian

Ok. Perhaps the option 'Check for updates' has been blocked by your IT department. Ask them to get the patch for you if you dont find an option.
As far as seeing the comments in the review is concerned, if it is a review file, you should be getting a yellow bar when you open it in Acrobat/Reader. If you dont see it on opening the review file, or you dont get the Connect/Welcome dialogs, probably it is no longer a shared review file. Try with some other review files and see if you can get it working.

PLEASE HELP! Trouble importing media used in Premiere CS6 into CC

After infinitely trouble with stability in OSX Premiere CS6, I´ve tried to open my project in CC. I get a dialogue box when importing media with heading "Cannot Link Media" and saying "The selcted file cannot be linked because it has 2 audio channel(s) and the clip was created with 1 audio channel(s). Now, these clips had no issues in CS6, but after installing CC, I cannot open anything in CS6 and CC won´t, as stated, accept my clips. Now, I tried to uninstall CS6 to late reinstall it. But Adobe seems to have removed the installer, anyway I can´t find it. SERIOUSLY!. This is EXTREMELY frustrating. PLEASE HELP!

I don't have any sure-fire solutions, but I do have a suggestion: rather than opening the whole CS6 project and going through the whole conversion process, try importing just the sequence(s) from the CS6 project into a new CC project. There are a couple of ways to do so: 1) File>Import, select "Import Selected Sequences," then pick the desired ones, or 2) drill down to the project in Media Browser, which will show you it's contents, then drag and drop the sequence(s) into the Project panel.
I found a few bug reports in the same neighborhood. They were all fixed in the release you're using. But each was specific to a particular file type, so you may have hit on a case that we didn't exercise. It could really help us nail this down if you provided one small clip that CC is balking at and, ideally, a CS6 project containing that clip.

Media Importing with Ver 9 Pro Extended

I just made a PDF with an imported mov. file in Acrobat Pro Extended, can someone tell me if the trail version (this is what I have currently installed) lets you view the imported movie on an other machines. I've tried it on my Mac Leopard and Tiger OS with pro 8 installed and on my Dell Laptop with reader 9 and flash 9 and still can't get the imported movie files to play.
I wanted to test drive the new product and see if this would be something I could use for easy distribution of media files for my people in the field.
Need some help...were am I going wrong?

If your media file is in MP4/h264 format it should be embeddable as is. Alternatively you could convert it to the compatible FLV format outside Acrobat. One popular tool is FFMpeg or you could use an online service (Zamzar, MediaConvert).

Is LiveCycle only a part of Adobe Acrobat 9 Pro EXTENDED, or does it come with the pro version too?

Sorry, I know this is dated but my company doesnt offer Acrobat X (yet. It is currently pending approval from IT). Anyway, I am wondering if the Livecycle designer program comes with the Adobe Acrobat 9 Professional version or just the Extended which I cannot get? This is very important as I will be using it to create a form (literally just one form lol).
Thanks

Designer ES is distributed with both Acrobat 9 Pro and Acrobat 9 Pro Extended for Windows.
Steve

Problem with Adobe Acrobat Pro Extended version 9.3.4 reading Inventor 2009

I would like to be able to generate 3D PDF files from Autodesk Inventor CAD models (e.g. .iam files) using Adobe Acrobat Pro Extended. I am constrained to use Inventor 2009. When I originally installed Acrobat Pro Extended, I was able to make this work after installing the IMPORT3D update at:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4073
Recently (9/5/2010), I updated Acrobat Pro Extended to version 9.3.4. I believe that following that update, I lost the ability to read in Inventor 2009 files. Acrobat Pro Extended now gives the error messages:
"Exception has been raised" followed by:
"Acrobat could not open 'file' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF."
This is exactly what happened when I first installed Acrobat Pro extended and before I installed the IMPORT3D update mentioned above. I tried re-installing that update but now the installer gives the error message:
"No qualifying products found to apply this update."
Note that Inventor 2009 does allow one to "Save Copy As" to PDF format, but this just creates a 2D PDF snapshot of the current model view -- same for print to pdf.
I suppose one thing to try is removing Acrobat Pro Extended and then re-installing without the 9.3.4 update, but with the IMPORT3D update -- but if that is necessary, then I won't be able to take advantage of any further updates (e.g. security updates) to Acrobat, which seems like a bad situation.
Has anyone else had this problem? Or is it just me?

I may have figured out what was causing my problem with conversion of Inventor 2009 to 3D PDF. After playing around with a number of inventor files, I discovered that the conversion worked fine when there were no references to external files. For example a .ipt file (part file) seemed to convert fine. I believe the problem was that on the form one obtains with Edit->Preferences->Convert to PDF->Autodesk Inventor->Edit Settings->Import->Assembly, the check box for "use root file directory" was NOT checked. Oddly, this is the default and I'm pretty sure I tried setting the conversion options to the default. In any case, I now seem to be able to perform the conversion of Inventor 2009 to 3D PDF so this problem is solved I guess.

Can I still download Adobe 9 Pro Extended and will it work with Windows 8 64 bit?

Can I still download Adobe 9 Pro Extended and will it work with Windows 8 64 bit?

It is not clear what application you mean when you say Adobe 9 Pro Extended, so it ois not certain if it is available for you to download. If you can diownload it, it will only be valid for a 30 day trial unless you already own it and have a serial number to activate the trial with.
You can search the following site and see if you can find the trial version to download... this site is the only likely place you might find the software available for download.
If you find it there, be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
http://prodesigntools.com/tag/ddl

Premiere Pro CC crashes when importing media.

Premiere Pro CC crashes when importing media. Every time. Driving me crazy.
It crashes as soon as the Windows dialogue box comes up.
Does it in new projects and in a project I created and imported into just fine 2 days ago.
Have rebooted.
Running Windows 8.1 on Samsung Series 5 ultrabook Intel i5 - not too sure what else to say about other settings:
I did have a problem the other day when Windows was crashing when browing a large folder of largish images and video clips but it went away when I put images and videos in separate folders.

Thanks for reply.
Point taken but I've been using it for over a year for simple edits (5 min films) in PPCC just fine. Can't even do what I could do the other night now.
Simple folder with a few jpegs and movies in it. In fact it just crashes before I even got to another folder.

Importing project from ..... Ulead Media Studio Pro

Hi there,
I made a project in Ulead MEdia Studio Pro 7 (really, I did....), and I'm not satisfied with the results : the video is like a computer animated movie, and I see horizontal lines.
I'm told my Canopus Raptor RT doesn't work properly with Ulead, so I switched to Adobe Premiere 7 Pro.
Is there a possibillity to import the project (a whole day work....) into Adobe Premiere, or is that impossible.
Further : what would be the right settings for this 16:9 movie (PAL) to MAKE the final movie ? It is all digitally mastered, so I want a perfect result.....
Regards,
Marco

GLenn,
Good work, and there will be something extra in your Adobe payroll envelope.
The problem with the PrPro 1.5 to CS5 Mac, is that there was no PrPro 1.5 Mac version. With older Pr versions, say 6.5, there is not a platform limitation. Older (pre Pro) Mac Projects work fine in my PC. With the Pro introduction, PrPro 1.0/Pr 7.0/PrPro 7.0 (rather an anomaly), Mac support was stopped, until CS3. This created a gap, with ONLY PC versions, and no Mac compatibility. As Harm and GLenn pointed out, the only workflow is to take the older PRPROJ file (created on a PC), and Improt/Open - Save (essentially Converting it) in version CS3 on the PC, and that will allow a Mac to use the PRPROJ file.
This is when it pays to have friends on PC's, running PrPRo, so that they can do the Conversion for you. Baring that, then it's great to have folk, like GLenn, on the forum, who will do it for you. It's simple, so long as there is a PC, running CS3, or later, to get those Projects into a format/version, that the Mac can read. Time for some "bi-partisan" cooperation.
Glad that you got it to work, and happy editing.
Hunt
PS - one little caveat: There are differences in the Effects & Transitions, between the platforms, so a Project that was created in PrPro 1.5 (or 1.0, or 2.0), might have Effects, or Transitions, that do not exist on the Mac. Also, if one had 3rd party Effects or Transitions on the older PC, then those might show as missing, when the Project Opens on the Mac. In most cases, PrPro is very good at pointing out the exact location, and more details, where those appear. One can then just make note of the location, and go there to replace the missing Effect, or Transition, with one that does exist on the Mac. For me, going from Mac to PC, this process has been perfect, but I cannot say that it would be in all cases going from PC to Mac.

Light source from VRML with Adobe Pro Extended

I couldn't get DirectionalLight like in the following code to work when trying to import the file with Adobe Pro Extended.
Where should I put the DirectionalLight to get it work?
#VRML V2.0 utf8
Viewpoint {
position 0 0 500
NavigationInfo {
# headlight FALSE
type "EXAMINE"
DirectionalLight {
ambientIntensity 0
intensity 1
color 1 1 1
direction 0 0 -1
Shape {

Hello,
DirectionalLigh are not yet supported by the APEX VRML Importer. That's the reason why you could not get them.
We are working on improving this feature for a future version of APEX, but nothing has been scheduled yet and I am not able to provide you a date or version for the implementation of the fix.
Sorry for the inconvenience
Best Regards
William Gallego
A3D QE Team

How can i share my itunes media with another account user on my macbook pro

im looking to share my itunes media with a different log on user for my macbook pro. what iss the best/ easiest way to do this?? i.e. public share point or external network storage

Fingers crossed, the following document may be of some help with that:
iTunes: Setting up Home Sharing on your computer

I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it. I need the videos out of there. I have tried every way I can think of.

Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Help

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

Issue with Pro Res sources when encoding in Media Encoder.

There seems to be a big issue with Pro Res sources in Media Encoder. I've noticed that when exporting using the 'software only' mode my graphics and titles look horrible, they are pixelated around the edges and the compression looks bad. This issue only happens when it's being made from a Pro Res source, if I make the exact same file Uncompressed this issue is resolved. If I use the 'Cuda' option (which I already know is the better option) this issue is resolved. The thing is, in a work environment not all of our systems are Cuda enabled and I would like to use Media Encoder as a exporting option overall. I love Media Encoder, it's fast and easy to use but this Pro Res issue is huge because the majority of the time we are working in Pro Res. I also did a test out of Avid Media Composer to Media Encoder, I sent a reference file referencing the Avid MXF material and the issue is gone, this seems to my knowledge to be a Pro Res only issue. The settings I am exporting to is 960 x 540 h.264 and also .mp4. This is coming from a 1080p source and yes I do have the 'maximum render quality' checked for best scaling. I understand that Software only vs Cuda and Open CL use different algorithms when scaling but this seems crazy to me that it would look this much worse.
Anyways if somebody can please look into this that would be great, this seems to be an issue where I can't continue at this moment to use Media Encoder. Making my source files Uncompressed every time to do an export is just not a real workflow I want to do.
On a side note I've also recently noticed on a clip that had text over a grey background that there are lines going all down the screen evenly when exporting to even a non scaled 1080p .mp4. Once again, this issue goes away with any format but Pro Res. The weird part is this happens even with Cuda enabled. This is why I am thinking Media Encoder is having some sort of issue with the Pro Res codec.
I am on a current new 27'' fully loaded iMac with the latest Adobe CC updates.
Has anyone else experienced this?
thank you

No, it is why advance users do not use the wizard.
Have a look at OpenOffice.org and its form creation. Once you add your fields in OpenOffice.org, just export to PDF and the form fields will be named just like you named in them in OpenOffice.org and the drop down values carry over.

Acrobat 9.0 Pro Extended - importing an .avi

Not sure if this is the correct forum for my query. But anyway, I apologise in advance if it is...
I am using the above with a PDF file open. I am trying to insert a video clip into the PDF file. After selecting 'video clip' and select the extent of the area the video should cover on the page, I get a error message indicating that I need to install Apples's Quick Time application.
I have gone to Apple's web site and downloaded the Quick Time 7.0 application, and tried the process again, but the same error message appears, stating for me to install Apple's Quick Time application.
Any advice would be appreciate, on how I could fix this, and enable me to embed the video into the PDF file.
Do I need to install Quick Time Pro? Or is there a configuration setting in Acrobat 9 Pro Extended that I need to set?
I have tried to insert a .avi file which has a size of 30MB and also 500MB. Would this present a problem?
Thanks,
Andos

Are you using the Touch up text tool?
Check document properties and see if there is any security options enabled.

Help with opening a .PDF in browser (firefox) - have Adobe Acrobat 9 Pro Extender installed

Hi all,
I have Adobe Acrobat 9 ProExtender installed, whenever I go to my firefox options and change the .PDF setting to (USE ADOBE ACROBAT (in firefox)) setting, i get a screen which is whited out, and a message from Adobe Acrobat with a question mark (?), but no message is there to read.
That is the scr
een that pops up, I can back out and try the link again for it to work, but it does it to all my .PDF files I try to view on the page. All I can do to prevent this is to save to disk, and open with adobe acrobat pro extender, but sometimes the file I need to look at are quick and would save a lot of time just opening it on the browser.
Thanks for the help!

walker81 wrote:
Just change the windows settings that it should opens pdf files with Acrobat Pro (default).
http://support.microsoft.com/kb/307859
Unfortunately, it's not that simple because Acrobat and Reader share files, and that's why Adobe recommends not to have them both installed in the same machine.

Importing Media With Pro Extended 9

Similar Messages

Maybe you are looking for