Importing .mov files to InDesign CS2

I am trying to import a H.268 or Mpeg .mov files into InDesign CS2 and every time I select the file, I get the following message pop up:
"Error: Cannot place this file. No filter found for requested operation"
When I check the 'Interactive Options' the options such as 'Movie Option' or 'Sound Option' are graded out, so that I cannot select them.
When I google the Error message, people posted articles saying that you had to set the PDF options, but I cannot find this. I have look at the general preferences section, but there is nothing for movies. I also looked at the 'Configure Plugins' section, and 'Media.Framework' plugin is locked, but I am not sure what to do.
Please help as I need to get this finished in the next 24 hours and cannot make this work!

Please see above for what I have selected from the media panel.
In terms of the 'PDF Interactive export dialog' I am not sure what you mean, could you please talk me through this?
This is the instructions that I have been following http://helpx.adobe.com/indesign/using/dynamic-pdf-documents.html#create_interactive_docume nts_for_pdf
However, where it says
"Buttons And Media
Select Include All to allow movies, sounds, and buttons to be interactive in the exported PDF file. Select Appearance Only to include the normal state of buttons and the video posters as static elements."
I cannot seem to find this menu, the only one I can find is Buttons & Forms and when I open this all of the options are graded out. Please see the screen grab below...

Similar Messages

Importing .tif files in indesign CS2

Hi all!!
If there are 200-300 pages in Indesign and if I wanted to import the pages in .tif extension to Indesign,I am currently using the Adobe's ImageCatalog.jsx script.But I have all the pages in the server foler i.e the 'W drive is the server drive and it does not show up in the dialog box when the script is run using ExtendScript toolkit. Can anyone help in changing the code below to add the server drive in the dialog box so that I can access all the pages in that drive.I would be grateful if anyone could help me in fixing this.
Thank You
Krishna
Here's the ImageCatalog.jsx script for CS2:
Olav Kvern, "Importing .tif extension files to IndesignCS2" #6, 19 Jul 2007 11:24 am

Please see above for what I have selected from the media panel.
In terms of the 'PDF Interactive export dialog' I am not sure what you mean, could you please talk me through this?
This is the instructions that I have been following http://helpx.adobe.com/indesign/using/dynamic-pdf-documents.html#create_interactive_docume nts_for_pdf
However, where it says
"Buttons And Media
Select Include All to allow movies, sounds, and buttons to be interactive in the exported PDF file. Select Appearance Only to include the normal state of buttons and the video posters as static elements."
I cannot seem to find this menu, the only one I can find is Buttons & Forms and when I open this all of the options are graded out. Please see the screen grab below...

Can no longer import Word files into InDesign

Hello,
For many months I have been importing Word files into InDesign CS3 (Mac OSX 10.4.11) with no trouble, but I started having a problem yesterday.
When importing a 17-page Word file with 16 footnotes, I got none of the text and only the footnote numbers. This is what I get in InDesign:
12345678910111213141516
(Endnotes)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
These are the things I've tried already: restarting, deleting preferences, changing the import options, using CS2, importing someone else's Word file, importing a Word file that I imported successfully a couple of months ago. None of this works.
It has been suggested that I save the Word file as rtf, but since I have 200 files to import and I'm using Word's character styles for italics, bold, small caps, etc., I'd rather try to fix this problem.
Can someone help?
Thanks,
Tina

I am using indesign CS2 and i'm trying to import a Word document into a new chapter for a book i'm laying out. it's about 30 pages, but there are at least 80 foot notes. i'm able to get about 1/2 of the document with the footnotes to flow correctly, then EVERYTHING disappears. the only way i've been able to get the remaining text to appear is by adding characters to the text. i'll hit "vvvvvvvvvvvv" a bunch of times and "magically" a little chunk of text and it's footnotes appears. then the ole disappearing act happens. so i do it again. i'm able to get all the text to appear finally, but when i delete the "vvvvvvvvvv" from the places i inserted them, the text disappears again. i have no idea why this is happening or how to fix it. any ideas?
thanks so much,
travis

How can I get iPhoto 9.5.1 (902.17) to import .mov files?

I have a brand new MacBook Pro with 2 TB SDD running Mavericks that I bought 2 weeks ago.
So far I have imported about 5,000 photo files into iPhoto 9.5.1 (902.17) plus about 25 videos as .mov files.
But on today's import session, it stopped taking any more MOV's, giving the following error message:
"The following file could not be imported. The file is in an unrecognized format." and it then it lists the .mov files.
I tried rebuilding the LIbrary index, and have even tried creating a new Library and importing my smalles (12 Mb) .mov file to this new test library.
But I keep getting the same error.
I have the most recent version of all the software (i.e. no new updates are available.)
What else can I do?

I figured out a solution: The drive with the .mov files was a USB drive formatted as NTFS. iPhoto would import .JPG files from this OK, but would refuse to import .MOV files, giving the error noted above.
I found that if I copied the files from the NTFS USB drive to an SD card or to the Macbook Pro's internal SDD, I could get iPhoto to import the .MOV files without any problem.
Why does iPhoto 11 have a problem importing .MOV files from external USB drive formatted as NTFS, but no problem importing the exact same files from an SD-card formatted as FAT-16, or from a folder on the Macbook Pro's internal HD?

How to Import .MOV files in Adobe After Effects, I am Using Canon 700d for FilmShooting

Hello,
I have Just brought a canon 700d and started Shooting HD Movies but now i want to add some effects in my video E.G. Twixtor effect for slow motion but I am facing a problem that i cannot import .MOV file in Adobe AE CS4. Please help me. Also If you can tell me any free converter for .MOV to AF file format.
I am using Windows 8 OS.
Thanks!

CS4 is much older than Windows 8. CS4 is meant to work on XP or Vista. Getting it to run on Windows 7 was a bit of an issue, so I'm pleasantly surprised to hear that you have CS4 running on Windows 8 at all.
It's also possible that a new camera records in a codec that such an old version of AE doesn't understand.
Make sure you're running the latest update to your version of AE. You're on version 9, so make sure you've run the Adobe After Effects CS4 9.0.3 Update (I would not suggest updating in the middle of a project though, as any changes might break AE). I would like to reiterate: you're running a version that was released six years ago on an operating system that was released much more recently. So, be careful how you tread. However, if you're not running 9.0.3, you're missing some bug fix updates that might solve your problem.
I would suggest upgrading to a newer version of AE.
That being said, as Dave mentions, CS4 and earlier had lots of trouble with MPEG-4 and other codecs that used interframe compression. Can you open the files in your version of Premiere? If so, you can use Premiere or the Adobe Media Encoder to convert to a proper intermediate codec. MOV is just a container format. QuickTime with the PNG codec will work in After Effects CS4 with no problems as will the other codecs Dave mentions.

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Can't open Pagemaker files in InDesign Cs2

In the past i could usually open any Pagemaker 6 or 6.5 file in InDesign CS2. However this doesn't work anymore. I get a message o the screen telling me the file is corrupt and can't be opened. ( i can't really post the original message i get as it is in german).
This happens for any Pagemaker 6 or 6.5 file i have in my repository (and there are still many left so i had tried several ones from different dates and PM Versions)
As a first aid I tried to reinstall InDesign CS2 from the original discs. I uninstalledit before and did a restart of the Machine before i reinstalled it.
I use a Windows XP baesed system.
Does anyone have any idea on what i could try to get that back to work?

http://indesignsecrets.com/windows-xp-service-pack-3-breaks-indesign-cs2-pagemaker-convers ion-capability.php
Bob

Trouble Importing MOV files in adobe premiere pro cs3

Hi,
I just bought a Canon 60D camera and I am using adobe premiere pro cs3 for the first time.
I tried to import MOV file footages made by my Canon 60D, but it says that my files are not supported.
I don't know what to do!
Can someone help me?
Thank you.

Hi All,
Let me tell you how I solved the XDV9 codec trouble on my Windows 7 system. The solution is rather stunning because I am using completely free software. First download the Shark007 codec pack for your system here: http://shark007.net/forum/Thread-Setup-and-usage . Please be aware that the codec pack installer comes with a toolbar install option so make sure you de-select this option during the installation process. After installation check the MOV tab on the "Settings Application" program. Make sure "use LAV's splitter" is selected for MOV Playback.
Now comes the crazy part... To convert the XDV9 MOV video clips just download Windows Essentials Movie Maker for Windows 7. At this moment more info about this program can be found here: http://windows.microsoft.com/en-US/windows-live/movie-maker-get-started . Again, make sure to set the right settings during installation otherwise you will be installing a lot of possible unwanted crap like Windows Live Mail, Windows Skydrive etc.
Movie Maker has quite good settings for converting (High Definition or custom settings are supported). Select your clip, or select multiple clips to create an unedited full length clip of all your clips, and then select "create movie". I used the "use recomended settings for this project" settings as it matches the source file resolution and frame rates etc. It is quite some work to convert clips like this but its the only free solution I could find so far.
Good luck!
Rodger

Saving InDesign CS4 files for InDesign CS2

I'm about to upgrade from CS3 to CS4 but have a client who needs to open documents I create InDesign CS2. I've been saving files for this clients in CS3's interchange (.inx) format, which has worked fine. But CS4 .inx files will only open in CS3. One work around I found was on TUAW (http://www.tuaw.com/2009/05/08/tuaw-tip-saving-indesign-cs4-files-for-indesign-cs2/), which suggests opening the .inx file in a text editor and changing the version number. The resulting file should then open in CS4. I was wondering if anyone has tried this (with or without success) or has any advice on saving CS4 docs for CS2? Thanks very much!

I'll go with option 3 since I no longer have CS2 on my machine and my
client won't be upgrading anytime soon. Thanks for the help and great
advice.
I'd never use this workflow if I couldn't test it on CS2 before sending it off to the client. Don't know what to tell you here... good luck?
Me, harsh? Is that my rep?
Oh, come on. I can say it another way:
"Peter's going to be way too nice about this... DON'T DO IT."

Problem to import MOV files

Hi,
I have a problem to import mov files from my hard disk (coming from a Casio Exelim ZR100 @ 1920x1080, 30 pic/sec. 44kHz, codec: H.264/AVC ). I tried different project setups - doesn`t work . I get a common failure message. MTS file import works...
System Win 8
Premiere Elements last version, all updates done
Error Message:
nase30

Media import
A Google Translate of your error message says that you are experiencing a generic importer error; consequently, not an editing nor exporting issue.
If you are using the Casio ZR 100, the video involved would be characterized as
1920 x 1080 @ 30 frames per second (progressive)
Video compression = AVCHD (MPEG4 AVC/H.264)
Audio compression = IMA-ADPCM (stereo)
File Extension = .mov
On the Premiere Elements side you have Premiere Elements 11 on Windows 8 (assumed 64 bit).
I have downloaded one of these files from your camera brand/model from an online source.
Windows 7 64 bit Premiere Elements 11. No importing or other problem with video or audio components of the file.
Windows 8 64 bit Premiere Elements 11. No importing or other problem with video or audio components of the file.
Based on my findings, I have no evidence to make a generalization that there is a problem with this Casio video and Premiere Elements 11 on Windows 7 64 bit or Windows 8 64 bit.
So that leads us to look for other factors. Top of the list is the version of QuickTime that you have installed on your computer. (As John T. Smith has already asked and is awaiting a reply on that. If you have the latest version of QuickTime installed, then I would uninstall it and then reinstall it.
What type of problem are you report
"it worked before but not now"
or
"it never worked before"
What might be interesting to look at. If you rename just the file extension of your Casio AVCHD.mov from .mov to .mts, .m2t, or .m2ts can you then import the problem file?
We will be watching for your results.
Thank you.
ATR

Get 'Generic Error' when attempting to import .mov files with transparency?

I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
I have uninstalled the DVCPro Codec, but it didn't help.
I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
I've seen this issue on the web, but never a solution? Anyone?

Hi Terence,
I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
Regards,
Søren

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4 files. Now, they are not compatible. How to I get them into imovie?

Hi
I use
• DV-PAL or DV-NTSC - or -
• AIC
Yours Bengt W

Problems importing .mov file

I am all of a sudden having problems importing .mov files from my camera in iPhoto '08. Can't get them to import in Image Capture either...On the import preview screen, all that comes up are empty "boxes". If I highlight one of the boxes, it shows that it is .mov file, the size of the file, etc. but if i try to do the import, iPhoto just locks up.

iPhoto does not like very large movie files for importing directly from the camera. If you get it on the desktop you should be able to import it. I've imported 200MB movies with no problem.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Importing mov files in premiere pro cs5

I just installed Adobe Creative Suite 5 Master Collection on my machine and now, i have two issues.
1. I do have the latest quicktime installed but when i try to import *.mov files with audio, only the audio is imported and works fine. the video isn't, but I dont get a dialogue error box.
A). if the *.mov file has only video, i get a file import failure message saying " the file has no audio or video streams".
2. the next prob is my dymanic linking does not work.
Help please

Im trying something and I hope you can help me. I have two computers, one dedicated to capturing a event and the other I have is dedicated to playback. They share the hard drive via a network. What I want to know is- is there a way for the dedicated playback machine to access a video file that is still being captured by the capturing machine and play back parts of it in a sequence??
Gosford Lawrence
!https://www3.oovoo.com/oovoocallme/images/btn1.png|height=68|alt=http://webvideocall.oovo o.com/callme/gosford/236|width=123|src=https://www3.oovoo.com/oovoocallme/images/btn1.png| border=0!
Date: Thu, 21 Apr 2011 17:40:14 -0600
From: [email protected]
To: [email protected]
Subject: importing mov files in premiere pro cs5
Zone Alarm, eh? I used to use that program, but it got in the way of almost everything that I did, that I canned it completely.
Glad that removing ZA solved your issue.
Personally, I find MOV Animation CODEC to be quite good, and use that for a lot of work. Jeff Bellune, here, like the Photo JPEG format, but I have not explored that.
Good luck,
Hunt
>

IMovie 09 won't import .mov files

Running iMovie 09 (v8.0.6) under 10.6.5 on MBP 13.
I'm trying to import a couple .mov files from an external hard drive. In the dialog box that results after choosing File:Import:Movies, I can navigate to where the files are, but their names are grayed out so I can't access them.
Any ideas?
BTW, problem does not occur with .mp4 file.

Here is the same! The iMovie 08 wont import .mov files. Even if I made it in the iWork/Keynote with H.264 or MPEG4 codec. You can work with the .avi files , they are opening in iMovie well, and you can edit them also. But not the .mov files. Strange...
Message was edited by: Laximus

Importing .mov files to InDesign CS2

Similar Messages

Maybe you are looking for