Importing movie files created with SONY HDR-TG5

Having trouble importing movie files created with this camera. Have had success importing direct from the camera using streamclip, but struggling with old files imported from our PC. These files have these two extensions; .modd and .m2ts

Eric:
Thank you. MPEG Slipstream worked great.
Do you know if there is software available that would let me see what is in/copy the files in the Sony folder so that I might be able to copy the disk directly instead of having to copy the files off of it with Handbrake? Would having the QT add-on for the MPEG-2 playback component be helpful?
Thanks again
Tim

Similar Messages

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created with a older mac os x (lion) and converted them to import into fce. after doing this as well as putting clips on the fce timeline when playing back t.h

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created on a older mac os x (lion) and when I wanted to import them into fce, a quicktime conversion window opened up and converted them (I haven't experienced this in the past). I then imported the converted quicktime clips into my fce project. After doing this I took selected clips and put those edited clips on the fce timeline. When playing the video back in the fce timeline,I noticed
1) the video wasn't playing back smoothly like the original content
2) when looking at the timecode reading of the timeline, the timecode was sputtering as well as the video and audio. I exported to quicktime just to see if that was consistent, it was.
When I play the converted quicktime content independently of fce, it plays normally (no sputtering of timecode, video and audio. Need help to resolve the sputtering playback of converted video content in the fce timeline. I've never experienced this before. Any suggestions?

When you say you converted the clips before importing them into FCE, did you convert to AIC or DV and do the converted clips match your FCE Sequence settings exactly? If not, go back and convert the original files again, using the intended Sequence settings as a guide.
-DH

Time stamps in mov files created with iPhone and Vista

This has to do with the time stamps for movies created with the iPhone 3GS. When I directly view the files on the iPhone in Vista, it populates the "date taken" field. However, when I copy the files from the iPhone onto my desktop computer, I no longer see the "date taken" field. Any suggestiosn?

Just wanted to repost this question and see if anyone has any thoughts...thanks.

Importing .mov files created on a PC

I have just switched to Mac from PC and want to import movies that I have already made when using my old PC, but iMovie doesn't seem to like them.
Any sugestions?

iM is no 'all purpose editor' but meant to import from camcorders..
and: .mov is just a container, some say wrapper, no 'format'... QTplayer can playback a lot of formats, but little are supported to work with iM ...
use the free converter tool *Mpeg Streamclip* www.squared5.com to convert your 'videos' into dv-stream ... these file will import into iM...

Error when Importing m4v files created with Handbreak

I am copying my VHS home movies to DVD using a Sony DVD recorder. When I put the disk into my Macbook Pro it looks like a folder rather than a disk image. The folder (named SONYDVD_RECORDERVOLUME) is empty when I click on it. It plays fine on my DVD Player. Handbrake is able to load the DVD files and I can copy them using iTune high quality recording set. The resulting file funs fine with QT, loads on my iPod and plays fine, will copy into iMovie but when I try to put into Final Cut Express I get an error message : File Error: Unknown File. Is there something that I am missing??? Ideas would be appreciated,

Eric:
Thank you. MPEG Slipstream worked great.
Do you know if there is software available that would let me see what is in/copy the files in the Sony folder so that I might be able to copy the disk directly instead of having to copy the files off of it with Handbrake? Would having the QT add-on for the MPEG-2 playback component be helpful?
Thanks again
Tim

Import movie files made with (pro)consumer camera

As expected there is no way to import and manage those little movies (.mov or .avi) made with a (pro)consumer camera.
For example when you are on holiday and shoot a little movie between making your photos.
Now I use Foto Album Pro to manage 15.000 pics AND movies AND panorama's (bigger then 10.000 pixels) and they support movies and I can see a (selected) thumbnail of the movie so I see that thumbnail (with data and keywords) between all my photos. Perfect!!!
But.....
Now I am going to switch to LR (because of the editing capabilities and other modules) and beside that I CAN'T import my +/- 300 panoramas and also CAN'T import (just for managing not anything else) my avi's and mov's. Uffffffff.
But I keep smiling:-)

LR is perfect for me:-).. I mean in 2007 and later:-)..but in the early days I made photos with Powershot G5 and took movies as well..since 2005 I have a Canon EOS350D and good (L) glass.
I just want all my "image based media files" to be managed in one library, in one program. Not more...shouldn't be so difficult?
FotoAlbum Pro is better in managing then LR at this moment and I use it in combination with PSE 3.0. I switch to LR because of the "batch/actions" possibilities in LR wich I dont have in PSE. So i wished LR is the only thing I will need to manage and edit my image based files.

How do I import SWC files created with Flex info Flash CS4?

I've created very nice UI component using Flex 3 and I have exported it into a SWC file.
How can I import it into Flash CS4 to use it there?

Hmm... if you happen to be familiar with C#, then you may probably know about the problem of P/Invoke (this is a command that lets you access Windows API through C# code, which will apparently prevent it from functioning on other OSs).
What happens with Flex framework is somewhat similar to this. I.e. it relies to much on the features of Flex compiler and the components of the framework create a lot of cross-dependencies, which makes them barely usable outside the framework.
So, if you have time and doing this just as a matter of learning, I'd suggest you start an AS project in Flex builder and advance with it compiling it both with Flex and Flash to see if there are any differences (basically, once you see it doesn't compile / doesn't behave as you'd expect in Flash, you'll know you used something that is specific to Flex). These would be mostly meta tags, like [Bindable] for example.
And, if you need any tutorials on how to code in pure AS, then, well, there are really to many So that you can even choose what's appropriate / goes better with your learning habits.
If you like video lessons, there're tons of them at gotoandlearn.com, if you prefer reading documentation, here you go: http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/class-summary.html
if you prefer forums / written tuts, then, kirupa.com, actionscript.org, flashkit.com as well as Adobe forums will provide you with a lot of information.

Premiere Pro CC will not import .mov files

Having issues with Premiere Pro CC, I cannot import .MOV files created with my Canon 6D.
If I try to import the files, I get a very generic "File format not supported" error msg.
This is a new install of Premiere CC on a new computer. I was able to import them using Premiere Pro CC on the old computer.
Quicktime will play these files fine on my new computer.
Premiere Pro CS6 will import these files on the new computer.
Premiere Pro CC would open them fine on my old computer.
I'm not even sure where to start. Any help would be appreciated.
Here are my system details:
OSX 10.9.3
new Mac Pro
3Ghz 8-Core Xeon E5
64 GB RAM
Files are on external G-Tech Thunderbolt drive.

That was I was thinking at first, but if Premiere CS6 (installed on the same computer) imports and plays them, they must be on the system, no?
I really do not want to transcode. I have an existing project that uses the videos and the project on the new system will not import them or re-link to the videos. Really trying to get away from having to re-create the project and re-edit.
Thanks!

Cannot import .MOV files into PE11

I am using PE11 on a Windows 7 OS laptop. When I attempt to import .MOV files taken with a Kodak Easyshare z980 digital camera, I get the following error screen "The importer reported a generic error." According to iTunes, the .MOV files are stereo, 320x420, 753kbps, using H.264 video codec. Please help. I tried updating my codec, but it appears H.264 is an older standard and it is not easy to figure out exactly how to update that codec correctly, and safely. Thanks

1st, what version of Quicktime do you have installed?
2nd, MOV is a wrapper... what is inside that wrapper?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

How to import and edit a 3D video made with Sony HDR-TD10E camcorder, with .MVC file?

How to import and edit a 3D video made with Sony HDR-TD10E camcorder, with .MVC file?
I have PremierePro-CS5 installed.
This stereo 3D camcorder (Sony HDR-TD10E), output an .MVC (MultiViewCoding) file, coded in H.264 format.
This format is already compatible with Bluray3D stereoscopic format.
1) But, how to edit the .MVC in Premiere?
2) What plugin should I use (if exists) for PremiereProCS5?
3) Cineform Neo3D, can manage the .MVC format? Can convert it to Cineform format file, for import it into Premiere?
4) What software should I use to convert an .MVC video to an AVCHD H.264 file, and import it into PremierePro CS5 or CS5.5 for editing?
Thanks!
Horsepower0171.

Sorry, I am Italian, it is very difficult for me to understand what he says!
I can just read the english text, or follow the actions of a videotutorial!
Thus my question is the same:
-What software can do that?
-Sony Vegas 10 do the Bluray3D authoring?
-For MVC editing, should I wait for Adobe CS6? Or is it planned an update for CS5.5?

Get 'Generic Error' when attempting to import .mov files with transparency?

I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
I have uninstalled the DVCPro Codec, but it didn't help.
I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
I've seen this issue on the web, but never a solution? Anyone?

Hi Terence,
I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
Regards,
Søren

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

One of my imported MOV files turns "black" after editing with it for a time and I can't retrieve the images. This has happened three times, only this file. The placeholder is still there. Files are fine on hard drive. What gives? how to stop this?

One of my imported MOV files turns "black" after editing with it for a time and I can't retrieve the images. This has happened three times, only this file. The placeholder is still there. Files are fine on hard drive. What gives? how to stop this? is in final cut pro 10.1.4

I purchased a iBook G4 with OS 10.5.6. I imported .mov files (shot in High Definition) -- I hear audio in playback but no picture. What's wrong?

I purchased a iBook G4 with OS 10.5.6. I imported .mov files (shot in High Definition) -- I hear audio in playback but no picture. What's wrong?

What version of iMovie is this? Where did this media come from? It's probably in a format or codec not supported by your computer.

Trying to import a .mov file made with gotomeeting - no problems in past yet says No importable files -None of the selected files or folders can be imported. Change the selection and try again. re-recorded 3 times and still not accepting HELP

Trying to import a .mov file made with gotomeeting - no problems in past doing this. After 3 attempts recording the hour long video and trying to upload it to iMovie, it says No importable files -None of the selected files or folders can be imported. Change the selection and try again. What could the reason be?

After much research and troubleshooting, GoToMeeting replied with the final answer: We do not support the uploading of recordings to editing software. If you are having issues uploading a recording, unfortunately, we do not have tools or steps to resolve this. It is not a supported feature. I am sorry for any inconvenience this may have caused you.
The no longer plan to support editing of recordings made with their software. So, we are planning to find a new meeting provider.

Importing movie files created with SONY HDR-TG5

Similar Messages

Maybe you are looking for