Importing Multilanguage Translations with DTW

Hi,
My issue is to import multilanguage translations with DTW. The import itself works fine, the problem is to update.
The scenario is:
- some translations to an item A were imported
- now there are some translations in other languages, that should be imported to the item A
It should be possible, but i just can't get it..
Regards,
Leonhard Detzel
Edited by: Rui Pereira on Nov 7, 2008 1:45 PM

How do I set the UserLanguagesObject?
I use two templates:
1.) MultiLanguageTranslations:
RecordKey = 1
Numerator = ACME Item
FeldAlias = ItemName
PrimaryKeyObject = A100
TableName = OITM
2.) TranslationsInUserLanguages:
RecordKey = 1
LineNum = (empty when import)
LanguageCode = 9
TranslationsContent = this is german
When updating i tried to add an additional row in the second template or i created a new template only with the new record, setting the LineNum to 1. It doesn't work.
Or did you mean, that in the import i have to set all language codes, even if without translationscontent?

Similar Messages

Importing prices failt with DTW

Hi experts,
I have a problem when importing item prices with DTW.
I have 2 prices, salesprice with pricelistnum 1, i use 0 for import, and purchaseprice with pricelistnum 10, i use 9 for import.
Strange is that te salesprice is importing oke, but in the same import is also purchaseprice and this is not imported.
Already tried it with different templates but still can not import it.
I use template like this
recordkey,linenum,currency,price
1,9,EUR,.....
2,9,EUR,.....
1,0,EUR,.....
2,0,EUR,.....
Anybody an idea.
gr,
Mark

Hi.....
Price lists are loaded under the following schedule:
Currency Price LineNum RecordKey
Currency Price LineNum RecordKey
1 0 EUR 100
2 0 EUR 200
3 0 EUR 300
1 1 EUR 200
2 1 EUR 400
3 1 EUR 600
, Which corresponds to RecordKey template link to the articles, linenum identifies the price list and add currency and price respectively
I hope it will help
Best regards,

Import profit centers with DTW

Hi All,
Is it possible to import profit centers into the SAP B1 2007A with DTW, ?
I have to create 50 profit centers in a company, I cannot find template to import profit centers in the DTW:
Is it possible?
Another way to use copy express, because these profit centers are in another B1 company, but I cannot find the possibility in the Copy Express to copy profit centers. Where can I find?
Thanks: Veronika

Hi,
Their are no ways... Even by programming, no interface exists in the DI-API for this object.
Your only solution is either to create them from hand or by direct import in the DB (which I don't recommend).
Regards,
Eric

Error importing VAT Groups with DTW

Hello,
I have a problem with importing with DTW VAT Groups. The error I am getting is:
"" is not a valid value for field Category. The valid values are 'O' - Output tax and 'I' - Input tax. This error appears even if in my csv in the Category column I have set up O for outputs and I for imputs.
If i don't put anything in field Category, it imports them fine, but all of output type.
Am I missing something or this is a bug?
Thank you,

Irina,
The DTW uses the same properties as the SDK objects. If you look at the VatGroups object in the DI API help documentation for the SDK, you do not use an "O" or "I", you use and enumeration to signify whether the tax is for input or output depending on the document type. You will want to look at the VatGroups business object in the SDK help and specifically for the Category property the BoVatCategoryEnum Enumeration.
HTH,
Eddy

Importing Item quantity with DTW

Hello,
How can I import Items quantities (OITW.OnHand) with DTW ?
thanks taking care my question.

Jean Pierre,
The forum that you have posted your question in is for the SAP Business One integration for SAP NetWeaver. Your question is with respect to the Data Transfer Workbench as you should post this in the SAP Business One Form on this portal.
With respect to your question ... you would need to import item quantaties as Inventory General Entries. There is a sample of this loacated at ..\Program Files\SAP\Data Transfer Workbench\Templates\Data preparation examples\10. Testcase1_Test Data for Import function. The issue here is that by doing this you will also create General Ledger Transactions which you will then probably need to reverse.
HTH,
Eddy

Import AP/Invoices with DTW

Hello,
We tried to import AP invoices with purchase items only (no stock/sales item) and have a problem with importing an AP invoices with the same purchase item on different rows in the invoice. Import is succesfull but if i have item 5020 on row 1 and 4 , row 1 will be overwritten by row 4 in the import.
Is there an option to define this in DTW.
Could it be a problem with the summary type OPCH.SummryType ?
Thanks
Mark
Edited by: M. Hageman on Mar 13, 2009 9:03 AM

You may try to DTW a different ItemCode for line 4 first. Then DTW again by updating this line only. It should allow system to bypass ItemCode checking.
Thanks,
Gordon

Importing landed costs with DTW

hi all,
I use SAP B1 8.81 PL04, exesite there a way to transfer the landed costs with DTW?
thanks

Hi,
It may not be available in your PL. The latest DTW has the Landed costs folder with 3 templates OIPF, IPF1 & IPF2
Thanks,
Gordon

Cannot Import BP BankAccounts with DTW 2007

Hello All
I try to insert with DTW 2007 (on a SAP 2007 database) some BP banks account.
My Structure is like in SBO 2005.
I get : Invalid Code [OCRB.BankCode]
I d'ont understand because the bank Code exist in the Bank Table.
I Try to set the internal key of the bank or even a bank account name but nothing change...
There is my structure
RecordKey LineNum BankCode Branch AccountNo AccountName ControlKey Country InternalKey
1 1 a bank code a bank branch an account a name a ctrl key FR 1
Without the BPaccount CSV file, the DTW process work fine....
Thanks a lot for answers
Julien

Dear
The linenum might be wrong, please change to 0 for a try.
Best Regards,
Xiaodan AN

Importing Sales Opportunities with DTW

Hello,
I am trying to import the sales opportunities with the DTW, but I keep on getting the following error
potential amount is missing [OPR1.MaxSumLoc][Line: 1][Application defined or Object- definederroroSalesOpportunities]
I am using SAP 2007A patch level 47.
I have the following one line that I have been testing with, after my previous inputs failed. Please assist.
RecordKey 1
CardCode L1004
ContactPerson 2
Dataownershipfield 14
SalesPerson 4
Date 20090419
Status sos_Open
TotalAmountLocal 100.00
Edited by: Martin Kamau on Apr 19, 2009 6:57 PM

Dear Martin Kamau,
By SDK help, the Source table of SalesOpportunities Object is OOPR, and SalesOpportunitiesLines is OPR1.
In B1 application Sales Opportunity form, you could check which field need to set for OOPR and OPR1, you could refer to SDK help file also.
Best Regards
Jane Jing
SAP Business One Forums team

Can't import Serial Numbers with DTW

Hi,
I'm trying all day long to import data with the oInventoryGenEntry Template. I always got the error message :
[IGN1.WhsCode][line: 1],'LS46BPPNB connot be released from stock without a full selection of serial/batch no.'Application-defined or object-defined error65171.
here are the content of the files related to :
'Documents' :
RecordKey;DocDate;Comments;JournalMemo
RecordKey;DocDate;Comments;JournalMemo
1;20090601;Stock ini Logis;Stock ini Logis
'Document_Lines' :
Recordkey;linenum;ItemCode;Quantity
Recordkey;linenum;ItemCode;Quantity
1;0;LS46BPPNB;4
'SerialNumbers' :
RecordKey;BaseLineNumber;ManufacturerSerialNumber
RecordKey;BaseLineNumber;ManufacturerSerialNumber
1;0;BP46HS1S300170
1;0;BP46HS1S300183
1;0;BP46HS1S300184
1;0;BP46HS1S400018
I've tried to simulate an exit rather than an entry. I succeeded by adding a column 'SystemSerialNumber' with valid data into.
But, I have to generate an entry and i'm not supposed to know what SystemSerialNumber will be used.
An idea?
Best regards,
Francis

I found a way.
I have to define the column LineNum BEFORE the column BaseLineNumber.
With these files, it's OK :
Document_Lines :
RecordKey;LineNum;ItemCode;Quantity
RecordKey;LineNum;ItemCode;Quantity
1;0;LS32BHLNS;1
1;1;LS46BHYNS;1
1;2;LS40BPPNB;5
SerialNumbers :
RecordKey;LineNum;BaseLineNumber;ManufacturerSerialNumber
RecordKey;LineNum;BaseLineNumber;ManufacturerSerialNumber
1;0;0;BH32HS1Q900088
1;1;1;BH46HS1Q900095
1;2;2;BP40HS1QC00223
1;3;2;BP40HS1QC00224
1;4;2;BP40HS1S100356
1;5;2;BP40HS1S100391
1;6;2;BP40HS1S100396
Thank you all
Francis

Importing InventoryGenEntry with DTW

Hi experts!
I am trying to import an inventoryGenEntry with DTW and it sends me this error:
IGN1.WhsCode,Line: 1, Fractional quantity in row XXXX aplication defined or object defined error 65171
The document only have one line, the item have batch numbre managment.
I test this and whorked fine:
I create the item on another DB without Batch number managment an it works.
Header:
RecordKey,DocDate,DocDueDate,TaxDate,Comments
1,20091129,20091129,20091129,XXXXX
Line:
RecordKey,LineNum,AccountCode,ItemCode,Price,PriceAfterVAT,Quantity,WarehouseCode
1,1,XXXXX,6095,180.25,180.25,21.50,A01
Batch
RecordKey,LineNum,AddmisionDate,BatchNumber,Notes,Quantity
1,1,20091129,11090001,XXXX,21.50
Can somebody help me?
Regards.
Enriquillo Guigni

Hi Mr. Gordon,
I check the linenum field remark:
It should be an integer which begin with 0 ,it is just for update, keep it empty when import.
But I need decimal quantities to make this entry because I'm working with "chemical" materials, could you recomend me something diferent?
Regards.
Enriquillo Guigni

How to import Incoming Payments via DTW

Hello all,
I am importing opening balances for Customers via DTW. My client wants to import all the open Invoices at their original amount, and then import the incoming payments against them to have them net out to the correct remaining balance. I already know how to import the invoices. I'm looking at using the PaymentDrafts template in DTW for the Incoming payments but I could use some guidance. Can anyone provide and example of the data required to both import the incoming payments and apply them to the appropriate AR Invoice?
Thanks,
don shields

hi donald,
Check this link to resolve ur doubts.
Import Incoming Payments with DTW
Import Incoming Payments with DTW
also check this SAP Note
Note 1162513 - How to link an Incoming Payment to an Invoice via the DTW
Jeyakanthan
Edited by: Jeyakanthan A on Apr 30, 2009 10:31 PM

Error importing oBusinessPartners with DTW 2005.0.16

I can not import BusinessParters with DTW 2005.0.16. For objects like Items ... it works as usual. With oBusinessPartners the Source data is shown empty, resulting in 0 imports and in 0 errors. If I open the dialog "Maintain Interface" to see the field database, it is empty within the oBusinessPartners.
How can I correct this?
Thanks
Franz

hi all,
Franz is right with his interpretation: It is about participating in the Ramp-up program for SAP Business One 2007 A:
Customer upgrade projects will not be able to participate in the 2007 A Ramp-Up if PL23 (or higher) on SAP Business One 2005 A SP01 have been applied. This is because Enhancement Package content has been introduced with PL23 which, due to compliance rules that SAP must follow, SAP can only add to SAP Business One 2007 A once this new release has been assigned general availability status.
Necessary details for SAP partners can be checked at (as previously mentioned in this thread):
http://service.sap.com/~sapidb/011000358700000173412007E
Hope this clarifies,
Heike

2 issues with Importing an App with translations

Hi guys,
I've noticed the following issues in APEX 4.1 and also the 4.2 version on apex.oracle.com :
1) After importing a .sql file that contained the primary and translated application, if we change the ID of the translated application (which is allowed by APEX), the translation no longer takes effect. Even after re-doing a seed and a publish, although the .xliff file appears to be translated, the application is not translated in run time. But the internal APEX labels are (Welcome message, interactive reports, etc.).
Here's a detailed step of what I did:
-Created an application in English
-Mapped it to a French app
-Seed, translation, publish
-Tested the translation with the P_LANG change (translation based on Session) and the translation was in effect.
-Exported the application with the translation
-Deleted the application with its tranlsation
-Imported the application and reused the same ID
-Went in Shared Components > Globalization and changed the translated app's ID
-Seeded, published
-Tested the translation with the P_LANG change and none of the translation manually edited by me took effect.
Perhaps the problem lies in the mapping of the translation data?
2)If an application with the same ID as the translated application contained in your .sql file already exists, when choosing to reuse the ID of the .sql file, that application will be overwritten by the translated application without any warning and will no longer be listed in your applications list.
Please let me know what you guys think of these issues or if they aren't actually issues. Also, if there is a better place to report APEX issues, please let me know.

Finally found what we were missing. When installing multiple instances as in APEX 4, it required a new letter during setip for images. APEX 3.2 used i and APEX 4 was set as j. We needed to go into the application properties of each app that was converted to APEX 4 and change the image prefix to the letter j for Apex 4.

Data with "," overflows to the next field when importing data with DTW

Dear all,
When I tried to import data with DTW, for the data that includes ",", the data after "," all jumps into the next field after import.
E.g. Column A(memo): bank, United state
       Column B(project code): blank
       Result in SBO: Memo field : bank
                              Project code: United state
I have tried 2 ways.
1. Save the file as csv, and adding double quote(") at the beginning and ending of the data. However, it didn't work. It didn't work with single quote as well.
2. Save the file as txt, without amending the data at all.
It worked, however, in SBO, double quote is auto added, it becomes "bank, United state".
Please kindly advise how to handle such case.
Thank you.
Regards,
Julie

Hi,
Check this if it is useful :
Upload of BP Data using DTW
Rgds,
Jitin

Importing Multilanguage Translations with DTW

Similar Messages

Maybe you are looking for