Importing Nikon D800 raw video

How would one import NEF format from a Nikon D800 into Final Cut Studio 7?

Took delivery of my D800 yesterday, and did a couple of photo shoots with it.  While at those venues I also tested recording video to the SDHC card.  Placed in a card reader, the assets were not available to Log and Transfer.  However, the asset folder on the card contained two .MOV files for the tests.  I chose to copy those to one of my hard drives, and then from within Final Cut Pro I could simply import those files, and play each of them in the Viewer.  Prior to doing that I had confirmed that they could be played with Quicktime Player.
The files are ready to play, unlike the AVCHD files from camcorders.  A five minute segment in 1920 x 1080, was 851.MB.  Looked good.  I did the test without mounting on a tripod, but could hold steady so long as my elbow rested on the back of a sturdy pew.  Later I did a test with my grand daughter jumping around (what she would call dancing) of about 1 min duration, again in 1920 x 1080 for a file size of 163 MB.  It looked good, but she was very close to me, and her movements were not particularly smooth in the resulting video.
Both were shot using my Nikon 14-24 mm lens offering f2.8 aperture.  Import was into Final Cut version 7.0.3, btw.  Audio was recorded using the internal mic on the D800 -- the one of the church choir was pleasing sound, considering.
Ernie

Similar Messages

  • Error importing Nikon D800 RAW files into Lightroom 4.4.1

    Hi folks,
    I got an Nikon D800 and tried to import the RAW files taken with it to my Lightroom 4.4.1 installation on Windows 8.1 64bit.
    Lightroom info:
    Lightroom version: 4.4.1 [908273]
    Operating system:  (Build 9200)
    Version: 6.2 [9200]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 4
    Processor speed: 3,9 GHz
    Built-in memory: 16321,7 MB
    Real memory available to Lightroom: 16321,7 MB
    Real memory used by Lightroom: 1042,6 MB (6,3%)
    Virtual memory used by Lightroom: 1032,2 MB
    Memory cache size: 0,0 MB
    Maximum thread count used by Camera Raw: 4
    System DPI setting: 96 DPI
    Desktop composition enabled: Yes
    Displays: 1) 1920x1080
    I do get an error like this while trying to import the files:
    And then when I try to import them I get an error screen.
    The files can be viewed with irfanview so they should not be corupted.

    Have you used any Nikon software with them, perhaps an older Nikon Transfer or View NX?  These are known to make newer Nikon camera’s files unreadable by Adobe products.
    On way to test would be to take a new picture and move it to your hard-drive using either your OS-level functions (Finder/Explorer) or LR, itself, directly from the card, perhaps in a card reader.
    The utility, here, can reverse this obsolete-Nikon-software corruption:
    http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

  • Lightroom 4 corrupting Nikon D800 RAW files on import

    Has anyone experienced Lightroom 4 corrupting Nikon D800 RAW files on import?

    How do you know they aren’t corrupted before you import, or the old one wasn’t already corrupted and you just regenerated the preview and could then see the corruption where what you saw, before was from the preview cache and not the current image?
    Is the corruption a problem with the Previews or does LR actually choke on the file and say it is unreadable or show you a gray thumbnail or pixilation starts halfway down the photo.
    Can you prove the files were intact coming off the card and only are corrupted after importing into LR?  Can you get to the originals on the card, still?

  • I cannot open Nikon D800 RAW image files in lightoom 2

    I cannot open Nikon D800 RAW image files in lightoom 2.  My raw files will not import into lightroom (it imports jpegs, but not the RAW files) I am using Lightroom 2, version 2.7, camera Raw 5.7. Can you help?

    I would highly recommend upgrading to Lightroom 4 as the processing engine is a quantum leap ahead from Lr 2 just as your camera is a leap ahead!!
    p.s.  you can upgrade directly fro 2 to 4.

  • Importing and organizing raw video footage - options

    greetings-
    Looking for a better solution, if available, for importing & organizing raw video. I am using imovie for now. Soon to switch to FC express. After much exploring & learning on my new machine (recent convert), I’m a bit frustrated on how it video is handled.
    Please correct any of these that I’ve got wrong, but it appears that:
    Importing video (from DV camera) with programs provided on my machine can only be done through imovie and idvd.
    Importing video through these programs requires creating a project, and importing the video to that project.
    Then that imported video is associated with that project.
    So I want to take the imported clips (say from imovie), and organize them archiving, use on other projects, backup, etc. I know that I can find the actually video files by control clicking on the project in finder, hit show package, and get to "clip 1, clip 2...clip 55". This represents the raw footage, but now I’ve got say 55 separate clips, for just one import.
    I’d like to effectively organize my various raw videos by year/event etc. So that when working a project, a can pull in the different footage that I want to use. For instance, I previously imported and organzied video footage with my PC editing software, and now, thankfully, I can just bring that various footage from the external drive into Imovie and edit. If I want to do a project and grab some footage from 04, 05, 06, it's all right there.
    Is there a better solution for import & organizing my raw video clips more efficiently with imovie or idvd?? Or perhaps another program. Such that I’ve got the 1/2 hr of video "Christmas 05", one file (not 40 seperate clips), saved, and can pull it into projects as needed in the future... Ideally maintaining the clip breaks. Am I asking to much from apple? How do you all import/manage/save your imported video?
    Much thanks for any feedback!
    20" G5 core duo   Mac OS X (10.4.7)  

    Ciao Rubbersoul,
    unfortunately iMovie doesn't allow you to rename the clips (other than within the project), so if you want to label them for future reference, you'll have to do that outside iMovie.
    I personally save the best shots from each project to an external hard drive using the following method:
    • simply drag the desired clips from the iMovie project to the desktop
    • organize the clips by creating the appropriate folders (e.g. by subject, time, etc.), so you'll find your footage faster
    • rename the clips within the folders. If you don't need to give each clip a separate name, you can use tools like Renamer4Mac (http://www.power4mac.com) to batch-rename the clips.
    • transfer and organize your folders/clips on the external (Firewire) hard disk. You can do that manually or by using media browsers like iDive to organize and view your clips. iDive is a digital hub that can help you to keep not only your video but also music and pic collections under control, and it integrates with iMovie and FCE/FCP. Check it out here:
    http://www.aquafadas.com/idive-digital-video/index.php
    Always remember that DV eats up a lot of disk space and don't forget to back up your footage to tape.
    spero che ti sia d'aiuto
    mish

  • Nikon D800 raw files "unsupported image format".

    I've a problem with Nikon D800 raw files "unsupported image format".
    I've just upgrade to mountain lion with no success.
    also aperture seems the last version
    only Nikon software seems to work
    thank you
    Andrea

    Hey Andrea
    sorry for the late reply. Have been on some working holidays
    My setting is : typ>>>>  no
                           bit>>>>   14
    The only information, which is not transmitted is the adjustment level of the AF-finetuning
    Good luck and hope it works meanwhile also with your camera
    :-)) FJ

  • How to import Nikon Nef (raw Files) ?

    Hello
    I'm having problems importing Nikon Nef Raw files, PSE9 is displaying the message The file is damaged or file format
    cannot be included. Any suggestions please.

    You are going to need Adobe Camera Raw 6.3, but the only version that has been released is the Version 6.3 Release Candidate, which I don't think can be installed with PSE. You will have to wait until the final version of Adobe Camera Raw 6.3 is released.
    The only workaround is to use the Version 6.3RC DNG Converter to convert your RAW files to DNG files, which can then be accessed by PSE.

  • ACR 7.0 in Released version of CS6 doesn't open Nikon D800 raw files.

    The ACR 7.0 that installs with rhe released version of Photoshop CS6 still won't open Nikon d800 raw files.

    Noel - I do use a card reader and always have! I don't go direct from the camera. As I point out, I am working around the problems that are stated above and I am here forcing myself to learn by asking those questions. Thanks though. I’m not ignoring anyone if I were I wouldn’t have all the comments above.
    Jeff - I mentioned that I'm a teacher and need to know what I'm doing with the software. Sorry for the attitude.
    I am an artist before a teacher it’s just that I like to be proficient when I teach (google me).
    Why do you feel such animosity towards education? I’m really sorry I posted here at all.
    ssprengel -
    I am equally as surprised and not blaming LR4 just making an observation. I have used LR for years and manage a library of over 60,000 images with it. It is my software of choice and will continue to be. But this has become a persistent problem only with the D800 14bit NEF +- 45MB files, all other files from my Nikon DX cameras and my Canon cameras are fine. I’m not blaming LR4 it could also be the Nikon NEF, I just don’t know why LR4 truncates the D800 files and other software doesn’t.
    - if I move files using Nikon ViewNX 2 or Windows7 Explorer the files simply move without problem. When I move them using LR4 they become truncated (no end of file error message). If I move them with LR4 and then copy over them into the new folder with the original copy, LR4 corrects and is able to deal with the file in their new destination. (this means a lot of extra work and saving the originals in another directory LR4 doesn’t see).
    It's confusing. I have reinstalled LR4 3 times already and checked the hard disks. The bottom line is that both Windows and ViewNX will move the file without altercation. I don’t know why? Yet further confusion. Please realize that I am aware this may be an isolated issue and I intend to ask one of the college techs. to look at the problem.
    I am not attacking Adobe, I only use Adobe products with my images and I want it to work that’s why I came here in the first place. I have a lot of money invested in Adobe software both here and all our other licences. Please stop using words like blame, reporting an issue is not blaming. Don’t shoot me I’m just conveying my current (personal) experiences with the product. I’m trying to figure out why and how to make it work.
    This is my last post on this thread. Thanks a lot for all your help. I remain a faithful Adobe client and appreciative of all your kind remarks and assistance above.

  • Does Photoshop CS5 support Nikon D800 raw?

    Does Photoshop CS5 support Nikon D800 raw?

    Curt Y wrote:
    From posts I have read the camera raw starting in 7.2 is far superior to the older version.
    Yes, absolutely, no contest. The D800 already has an almost unprecedented dynamic range, and Process Version 2012 (ACR 7.1 and up), with its new highlight recovery algorithm, really makes it shine. Using PV 2010 (up to ACR 6.7) on that camera feels almost like a waste.

  • Nikon D800 raw files taken with Sandisk extreme plus 32GB SDHC card got corrupted. Able to preview them in Lightroom4.4 Library, but not able to import or transfer the files from card to computer. Any ideas on how to save images from Library Window in Lig

    Hi, I have shot few pictures on 31st December night in RAW mode using Nikon D800 and Sandisk extreme plus 32GB SDHC card. It looks like card got some memory errors so not able to transfer the files from Card to computer. However I am able to view the pics thru Lightroom ver 4.4 Library, but when I tried to import them, it gives me an error stating that file can't be read.
    Is there a way to save the pics from Library window in lightroom overcoming the card read errors ?
    Thanks in advance

    Hi SSPRENGEL,
    Thank you for your response. Here is the error message I am receiving, I tried with various destination folders in the computer but it still gives the same error:. Just to let you know, I am able to import pictures into these folders from other memory cards.
    I am able to finally at least extract the jpgs using the option suggested by elie-d

  • Nikon D800 RAW file import

    Hi,
    Just got Lightroom 5 and cannot import RAW files.

    You didn't re-save the NEFs in ViewNX2 did you?
    The reason I ask is that there is a new feature to exclude preview when saving (in Capture NX2 anyway - dunno 'bout ViewNX2) - I guess Nikon got tired of people claiming DNG compression was better when the main reason DNGs may be smaller initially is due to the absence of (or smaller) jpeg preview .
    Also, lots of people are using Lr5 with the D800 raws, but not a lot are using it with raws re-saved with the new ViewNX2.
    Bottom line: try one fresh out of camera and see if that works. And if still no go, make sure you update your camera firmware.
    Rob

  • Why won't LR5 import my Nikon D800 RAW images? It did till yesterday.

    I have been using Lightroom since the beginning and without trouble. I have been importing thousands of RAW images from my Nikon D200 without problems till yesterday, when the usual import ended poorly at the beginning:
    I tried again, then restarted Lightroom, then restarted the computer, then got the same result each time. Next I tried importing using the camera USB cable and got the same message. I tried a different memory card next, with the same result. Then I tried Nikon's Capture software which imported the files with no problem, as did iPhoto.
    Then I changed permissions to "everyone" for Lightroom, signed off and then onto a testing account created for the purpose. Lightroom created a library, and imported the same files through the card reader without a hitch.
    Obviously, there is something wrong with the Installation of Lightroom in my space that doesn't happen if I just change the user and nothing else. How do I fix the way Lightroom interacts with my user space?

    The LR Preferences are under your user folder so creating a new user would make a default preferences file for that user.
    Try removing or at least moving or renaming your LR preferences file for the user with the problem, and let LR create a new one for your normal user:
    C:\Users\YOURUSERNAME\AppData\Roaming\Adobe\Lightroom\Preferences\Lightroom 5 Preferences.agprefs
    Make sure you know where your catalog is since the last location won’t be remembered after you create a new preferences file.

  • Merge to HDR Pro does not work on Nikon D800 RAW (NEF) files

    Hi,
    I can't get Merge to HDR Pro to work on NEF RAW files from my Nikon D800 - nothing happens after after confirming the file selection.  However, it works ok if I convert those files to DNG (using Lightroom 4), and if I use the D800's JPGs, and if I use Nikon D7000 NEFs.  It just seems to be a problem with Nikon D800 NEFs.
    Steps taken:
    1. File -> Automate -> Merge to HDR Pro
    2. Browse... and select NEF files (even selecting 2 files does not work).
    3. Attempt to Automatically Align Source Images is checked.  Then press OK.
    Expected result:
    Progress cursor spins as files are loaded and HDR dialog appears.
    Actual result:
    Nothing happens - no progress cursor or CPU or disk activity - it is as if I had clicked cancel instead of ok.
    This is a clean install of the 64 bit CS6 beta on Windows 7 64 bit, with no plugins, and I reset preferences (Ctrl+Alt+Shift on startup).  I do have my existing CS5 Extended still installed, as well as Lightroom 3.6 and 4.0.
    I can send you the NEFs if you like.
    Here's my System Info:
    Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:4 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 2672 MHz
    Built-in memory: 6135 MB
    Free memory: 501 MB
    Memory available to Photoshop: 5352 MB
    Memory used by Photoshop: 70 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: GeForce GTX 560 Ti/PCIe/SSE2
    Display: 2
    Display Bounds:=  top: 0, left: 1920, bottom: 1200, right: 3840
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1200, right: 1920
    Video Card Number: 1
    Video Card: NVIDIA GeForce GTX 560 Ti 
    OpenCL Version:
    Driver Version: 8.17.12.9573
    Driver Date: 20120209000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Video Mode: 1920 x 1200 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce GTX 560 Ti 
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 16384
    Serial number: Tryout Version
    Application folder: D:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: C:\Users\Paul\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      D:\, 139.7G, 19.6G free
    Required Plug-ins folder: D:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: D:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1642  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   5,0,10,0  
       AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
       BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
    Required plug-ins:
       3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       ADM 3.11x01
       Angled Strokes 13.0
       Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Bas Relief 13.0
       BMP 13.0
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Color Halftone 13.0
       Colored Pencil 13.0
       CompuServe GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Dicom 13.0
       Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Embed Watermark 4.0
       Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Extrude 13.0
       FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mezzotint 13.0
       Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Photocopy 13.0
       Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Pinch 13.0
       Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.0
       Shear 13.0
       Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Sumi-e 13.0
       Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Underpainting 13.0
       Vanishing Point 13.0
       Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Wind 13.0
       Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       ZigZag 13.0
    Optional and third party plug-ins:
       Camera Raw 7.0
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

    Hi,
    The Ps CS6 public beta version contains the same camera support as found in Ps CS5/5.5 compatible CR 6.6. There will be future updates to CR 7 for Ps CS6 to pick up more camera support. The Nikon D800 NEF files are not supported, yet.
    If you like to work with your D800 files in the public beta build now, you'll have to get the DNG Converter 6.7 from here: http://labs.adobe.com/technologies/cameraraw6-7/
    and convert your files to DNG.
    regards,
    steve

  • Has anyone solved their LR4 / Nikon D800 RAW NEF issues?

    I've done a lot of reading on this topic and think I have a handle on how easily the new D800 NEF files can be corrupted by the older versions of Nikon Transfer.
    When I began using the camera I accidently made the mistake of corrupting them and haven't had any issues since... until yesterday.
    I photographed last night, and imported about 160 RAW NEF files onto my brand new Macbook Pro with Retina for a same day preview for the host.  I transfered the images using ViewNX2 & by association it's built-in Nikon Transfer 2 utility. I used the built in SD Card reader on the Macbook which has always worked in the past.  But alas!!!!!  While they imported fine, LR4 can't import them and gives me the error "Preview Unavailable at this Time".  I should note... Nikon Transfer 2 was set to clear the card after the transfer .
    Nikon ViewNX2 can see the images and I'd hoped to fix the issue by just converting them to JPEG's but, no bueno. It tells me it can't.  This is the precise issue I can into when I accidently used the original version months ago on my iMac.  But it's impossible that I have the old version on this unit.  It's less than a month old and I'd downloaded the most recent version from Nikon.  So I'm running under the assumption that the file is somehow corrupted.
    I've seen a lot of people running into issues getting used to the new workflow requied to deal with these enormous RAW's.
    Here's the all important question. After the files have an issue... is there anyway to recover them???  I can't retake them, the original shots were wiped from the card. So what do I do?  At least Nikon View can see them, so I have to believe that there is some image information there.
    Has anyone sucessfully fixed the issue?
    Going forward I plan to just import everything directly through LR4, so I think that'll aliviate future heartburn... but what's my "undo" solution?
    I know there's a lot that's been written on this topic and really appriciate the support!
    -Jared

    What Bob Frost just posted (after fixing the hidden http// part of the URL) worked for the image you uploaded, so try that:
    http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html
    BTW, I answered 14 to the bit-depth-12-or-14 question the utility asked, and it worked ok on the example corrupted NEF.
    Below is what I was typing up and testing before posting, and works to extract the embedded JPG Preview, but does not actually fix the corrupted NEFs, which is a better solution.  I am including it, below, for reference in case someone without corrupted NEFs also wants to extract JPGs from their raw files.  It uses the same tool from Phil Harvey without his customizations to work specifically with corrupted NEFs.
    == Original Message ==
    The raw data in the NEF you uploaded appears corrupted or otherwise unusable because when viewing in Windows Explorer using the latest Nikon NEF Codec that supports the D800, all I see is a small thumbnail then black with a few parts of color, however for that one file, at least, the embedded JPG preview is intact, and 7360 x 4912 in size, enough to see the camera-shake blur. 
    https://dl.dropbox.com/u/9905000/JBR_20120910_175757.jpg
    I’m on a PC and you’re on a Mac but the same tool is available - exiftool a command-line program you run in terminal (on a Mac) or in a Command Prompt window on a PC:
    http://owl.phy.queensu.ca/~phil/exiftool/
    If what you download includes a (-k) then remove it by renaming before attempting to run the command, below.  On Windows I would rename exiftool(-k).exe to exiftool.exe without the (–k) part.  The (-k) tells exiftool to display the exif information by default if you drag-and-drop to it.  While this is normally useful, for the purpose of extracting JPGs from NEFs this might be confusing so I’m suggesting to rename the executable before using it.
    Here is the command-line to extract the fullsize JPG from the NEFs and then copy the metadata tags from the NEF to the newly written JPG:
    .\exiftool -b -JpgFromRaw -w %d%f_%ue.jpg -execute -tagsfromfile @ -srcfile %d%f_%ue.jpg -overwrite_original -common_args --ext jpg .
    The above command assumes both the exiftool executable and all the NEFs are in the current folder.  The current folder is designated by a single period both at the very beginning and the very end of the command-line.  If exiftool is in a different folder, then supply that path instead of the initial period, and if the NEFs are in a different folder, substitute that folder-name for the final period.  The final period has a space separating it from the preceding –ext jpg. 
    It is also assumed that only NEFs and the executable are in the current folder.  If there are other files, they may confuse things so you might want to move things to a temporary working folder, and I’d suggest working with a copy of the NEFs just in case something goes haywire, you’re not overwriting the originals, corrupt as they may be.
    For reference, the above command-line was simplified from a more complex example that didn’t quite work with your file, one that conditionally extracts either the full-size JPG or the tiny JPG-thumbnail.  The example is the last one in the Copying Examples section, here:
    http://owl.phy.queensu.ca/~phil/exiftool/exiftool_pod.html#copying_examples

  • Photoshop CS3 unable to import Nikon D90 RAW NEF Files?

    I'm working on MAC with the latest OS and CS3 Photoshop and Lightroom 1.4.1 I'm looking for a way to import the latest Nikon NEF RAW files into Adobe. Will I need to wait for Adobe RAW 5 plugin? I cannot open the latest Nikon NEF Files from the new Nikon D90 slr camera...Any suggestions? Or a date for the new Camera RAW plug
    in??
    Thanks,
    [email protected]

    ACR 5 will NOT work with CS3, only with CS4.
    For CS3
    and your camera you need ACR 4.6, a nominally beta Release Candidate downloadable from Adobe Labs.
    Click HERE.

Maybe you are looking for