Importing .odt file fails

I am trying to import a .odt file created in neooffice into buzzword. While importing (percentage goes all the way to 100%) a dialog pops up stating that Buzzword recognized the file but had a problem converting the file.
File has images and different page styles (one page being landscape while others are portrait mode), otherwise nothing out of the ordinary.
Not sure if there are any log files etc that I can forward to assist with determining issue.
Thanks

Hello,
I'm sorry for the delay in responding to your post.
Could you share the original .odt file with us? Please reference this forum discussion when you send it. We'll be happy to try to debug the issue on our end.
Kind Regards,
Michelle

Similar Messages

Imported Photoshop File Fails to Update

I have imported a layered file from Photoshop CS3 into Flash
CS3. The original import works fine but when I change the PSD file
in Photoshop and try to update it in Flash it doesn't get updated.
To do the update I right-click on the bitmap layer in the Library
and select Update. A dialog is displayed showing the name of the
layer and at the bottom of the dialog it says "1 of 1 items need to
be updated." But after I click the Update button, it says "0 of 1
items updated" and a question mark appears next to the Label in the
dialog. And the bitmap is not updated.
I have tried this same procedure with a simple single-layer
bitmap and that works so I'm guessing it must have something to do
with the structure of my Photoshop file. That file has a folder
nested within another folder. The inner folder contains several
layers, one of which is the layer in question.
At one point, I thought it might have something to do with
the fact that the layer contains a SmartObject but I tried the same
procedure on another layer in the same folder which contains just a
simple bitmap. That layer fails to update also.
Is this a bug?
David Salahi

Yup, saw all that, but wasn't sure what format those elements were (PNG or JPEG). I assumed JPEG, due to the compression settings, but wasn't sure if the compression was separate from the file format.
But, how is transparency information being stored in a JPEG format? I assumed some other 'under the hood' things were being done to achieve that, and worried that it would not necessarily be supported by all browsers, etc.

Import Map file failes with single/Multiple Occurance

Hi All,
Using a file I mapped the source and target structures.. The source file has one multiple occurance node . so I used look up option in source table and mapped with target fields...saved the map..
When I used the following XML file .. I used the same map created befoe... I see the Remote System fields are not failed to map to target structure.. How can I get rid of this issue....
<Product>
--<Name>Rajeev</Name>
--<REMOTE_SYSTEM>
<Z_MDM_REMOTE_SYSTEM>
       <Z_MDM_SYSTEM_NAME>Panaroma AW Customer ID</Z_MDM_SYSTEM_NAME>
     <Z_MDM_VALUE>600013</Z_MDM_VALUE>
     <Z_MDM_VALUE1>600011</Z_MDM_VALUE1>
     <Z_MDM_VALUE2>600012</Z_MDM_VALUE2>
</Z_MDM_REMOTE_SYSTEM>
--<REMOTE_SYSTEM>
</Product>
Using above I saved the map.. Its fine.. I am able to import data in to MDM..
When the file has multiple values of remote system as shown below then field are unmapped... vice versa is also the same..
<Product>
--<Name>Rajeev</Name>
--<REMOTE_SYSTEM>
<Z_MDM_REMOTE_SYSTEM>
       <Z_MDM_SYSTEM_NAME>Panaroma AW Customer ID</Z_MDM_SYSTEM_NAME>
     <Z_MDM_VALUE>600013</Z_MDM_VALUE>
     <Z_MDM_VALUE1>600011</Z_MDM_VALUE1>
     <Z_MDM_VALUE2>600012</Z_MDM_VALUE2>
</Z_MDM_REMOTE_SYSTEM>
<Z_MDM_REMOTE_SYSTEM>
       <Z_MDM_SYSTEM_NAME>Panaroma AW Customer ID</Z_MDM_SYSTEM_NAME>
     <Z_MDM_VALUE>600013</Z_MDM_VALUE>
     <Z_MDM_VALUE1>600011</Z_MDM_VALUE1>
     <Z_MDM_VALUE2>600012</Z_MDM_VALUE2>
</Z_MDM_REMOTE_SYSTEM>
--<REMOTE_SYSTEM>
</Product>
Do I need to create a seperate map for multiple iteration and single occurance..OR missing some thing? Please advice..
Thanks
Rajeev

HI Ravi,
May be I took the wrong example..
I am not talking about remote systems... I am talking about XML source file.. If the XML source file consist of single occurance of any qualifier table then those qualifier table fields are not mapping.. IF I used the base file as multiple occurance Qualifier table....
In the same way if I use base file as single occurance of Qualifer table .. Qualifier Fields are not getting mapped if the source file is single occurance..
Suppose :If I use the base file as this and save the map.. I am able to import files whcih are single occurance of EMAIL...
Fields are not getting mapped if the EMAIL occurnace is multiple.....
<Product>
--<Name>Rajeev</Name>
--<EMAIL>
<Z_MDM_EMAIL>
<ID>ABC_yahocom</ID>
<TYPE>TEMP</TYPE>
</Z_MDM_EMAIL>
--</EMAIL>
</Product>
In the same way: If I use the following XMl as base and create a map and save it.. Able to import files which had email occurance multiple.. Unable to import data and the fields are not mapped ......
<Product>
--<Name>Rajeev</Name>
--<EMAIL>
<Z_MDM_EMAIL>
<Z_MDM_EMAIL>
<ID>ABC_yahocom</ID>
<TYPE>TEMP</TYPE>
</Z_MDM_EMAIL>
<Z_MDM_EMAIL>
<ID>CDE_yahocom</ID>
<TYPE>TEMP</TYPE>
</Z_MDM_EMAIL>
--</EMAIL>
</Product>
Please advise.. Thanks Rajeev.

Importing .sca files fails

Hi,
   I posted this message in NWDS Administrator also. I'm trying to configure NWDI - checking in and importing required SCs.
   In the CMS -transport Studio, the three checked in software components(SAP JEE, JTECHS, BUILDT) do not get imported.
   The CBSmake.log file has this entry:
Info:Starting Step CBS-make at 2006-03-30 21:24:14.0208 +5:00
Error:Cannot switch to input mode PRIVILEGED, because another import is running into the same buildspace J2E_SS_D
Error:or the buildspace was manually switched to PRIVILEGED by the CBS administrator.
Info:Step CBS-make ended with result 'fatal error' ,stopping execution at 2006-03-30 22:06:46.0608 +5:00
How to resolve this issue?
Thanks
Sumathi

Hi,
Imported failed for the three .scas and the entry in CBS-make.log is:
Fatal:The request queue is not processed by the CBS during the given time intervall => TCS cannot import the request because queue is not empty
Fatal:There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
Fatal Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.:communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
     at com.sap.cms.tcs.client.CBSCommunicator.importRequest(CBSCommunicator.java:369)
     at com.sap.cms.tcs.core.CbsMakeTask.processMake(CbsMakeTask.java:120)
     at com.sap.cms.tcs.core.CbsMakeTask.process(CbsMakeTask.java:347)
     at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
     at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:179)
     at com.sap.cms.tcs.core.TCSManager.importPropagationRequests(TCSManager.java:376)
     at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:216)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.execImport(ImportQueueHandler.java:585)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.startImport(ImportQueueHandler.java:101)
     at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:583)
     at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:559)
     at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl0.startImport(LocalCmsTransportProxyLocalObjectImpl0.java:1440)
     at com.sap.cms.ui.wl.Custom1.importQueue(Custom1.java:1170)
     at com.sap.cms.ui.wl.wdp.InternalCustom1.importQueue(InternalCustom1.java:2162)
     at com.sap.cms.ui.wl.Worklist.onActionImportQueue(Worklist.java:880)
     at com.sap.cms.ui.wl.wdp.InternalWorklist.wdInvokeEventHandler(InternalWorklist.java:2338)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Info:Step CBS-make ended with result 'fatal error' ,stopping execution at 2006-03-31 18:43:19.0707 +5:00
Any suggestions to resolve this would greatly help.
Thanks
Sumathi

Import/Place .odt files in Indesign CS6

Hi,
Can we place/import .odt files in Indesign CS6? If yes, how?
Or do we need to convert them into other specific word formats so that the content & styles remain the same.
Thanks.

Save as Word file.
InDesign can't import ODF files - so you'll have to use a format or application that does support.
I don't know if the index entries are kept when going from ODF to Word.

Hello, failing miserably here, cant import nef files from aperture 3.1.2 to iphone 4. I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's Anyone out there to aid this frustrated photographer??

hello, failing miserably here, cant import nef files from aperture 3.1.2 to iphone 4. I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's Anyone out there to aid this frustrated photographer??

See my reply to a later simplified version of your question. I don't think that either iPhone or iPad recognize RAW files such as NEFs. And the iPhone is not designed to be a mass storage device like a portable flash or portabel hard drive for temporary storage of files, if that's what you're after. As I mentioned in my previous reply, I have an iPad and have been experimenting with it as a tool for photography, hoping that it would be a nice travel tool for backing up and viewing photos from my Nikon dslr. But both the iPad and iPhone just are not set up to do that well. Both show photos nicely, but organization of photos is very frustrating since you can't create albums on the iPhone or iPad, but only back on your sync computer. (There is one very powerful photo organization app called SortShots, but you import photos to it and it organizes and stores the images wtihin the app not using the native photo app. It doesn't work with NEFs either.) I don't know of any RAW processing software for either device.

Failing to import .NEF files into iphoto

i photo will not import .NEF files. Every time I try to import a file an error message comes up saying...
The following file could not be imported. (import failed).
The .JPEG file imports straight from the camera, however the .NEF file will not import and I get this error message.
Please help me!

Is your Nikon listed here (http://www.apple.com/macosx/upgrade/cameras.html) as a Tiger compatible camera? Also have you run this update: Digital Camera RAW Support Update 1.0.1 (Universal)
Do you Twango?

PGW 2200 failing to import trunks file

Hello ,
Would someone help with following problem :
I have working PGW2200 in nailed mode and I try to remove one E1 line from its configuration.
Import of trunks file seems to be OK ( I get COMPLD    "files:WARNING: All existing bearer channels have been replaced with the ones in the imported file." ) , no errors are reported ,
but when I try to deploy the configuration via prov-cpy: command I got following error:
"MGC-01 - Media Gateway Controller 2014-01-05 14:27:36.500 EET
M DENY
   SROF
   "PROV-CPY: Validation of data files failed"
   /* Status, Requested Operation Failed on the component */
   PROC=engine
   COMP=Bearer yyy-xx-path/ffff/21
   Call state is not idle
   Ensure the call state is idle
   PROC=engine
   COMP=Bearer nas-path-xx/1/1
   Call state is not idle
   Ensure the call state is idle   ;
I am sure there are no calls on any CIC of the gateway. I rebooted the AS Server - doesn't help.
Do I have to stop/disable the C7 link or else when I deploy configuration with new CIC file ?
Thank you inadvance !!

Hi,
You can gor for SQL Loader. Best I suggest that.
http://www.oracle.com/technology/products/database/sql_developer/pdf/SQLDeveloperWhitePaper_V12.pdf
While importing data select the particular table and right click you get the Options, from that select import follow the instrucitons.
- Pavan Kumar N

When I try to import files from iMac HDD into the event, it fails. FCPX dosn't see this files for import. Files are *.m2ts and *.mpg. Should I buy plagin Quicktime component MPEG-2 to resolve a problem?

When I try to import files from iMac HDD into the event, it fails. FCPX dosn't see this files for import. Files are *.m2ts and *.mpg. Should I buy plagin Quicktime component MPEG-2 to resolve a problem?

no you should transcode those files into an format that os suitable for editing. Like proRez. Although you might need some Flip4Mac or perian or something to do the conversion.
adam

Elements 11 import of NEF files fails

I've been using Elements for some time and importing NEF files from my Nikon D7100. I have Camera Raw 7.4 installed. When I try to import new NEF files, it get's about 95% done and it says Import Failed. Nothing was imported. The fields or files selected to import did not contain any supported file types, or the files are already in the catalog.
They are not in the catalog. What is all of a sudden wrong?
Any help you can provide would be geatly appreciated.
Thanks
Chuck Origer

Thank you, Jim,
this was what I expexted. I misread the List provided by Adobe
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
by (wishfully) slipping to the next row which read 3.6 for Lightroom version.
Actually the list gives the correct information
Dr. Dietrich Klusmann
Gryphiusstr. 1
22299 Hamburg
Email: [email protected]
Homepage: zpm.uke.uni-hamburg.de/m/klusmann
Mobil: +49 176 24536637
Am 25.09.2014 um 23:59 schrieb JimHess <[email protected]>:
Import of NEF-Files from Nikon Df did not work in Lightroom 4.4
created by JimHess in Adobe Camera Raw - View the full discussion
According to the list published by Adobe, that camera was not supported until Lightroom 5.3. I don't know where you got information to the contrary. You'll either have to upgrade or use the DNG converter.
Camera Raw plug-in | Supported cameras
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6764570#6764570
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Camera Raw by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Importing CSV file with Data Merge Fails

Specs
See pasted text from CSV at http://pastebin.com/mymhugpN
I am using InDesign CS6 (8.0.1)
I created the CSV by downloading it from a Google Spreadsheet as a CSV. I confirm with the Terminal that the character encoding is utf-8 usnig the file command.
Problem detailed
I am trying to import a CSV file (utf-8) with Data Merge via the Select Data Source... command with Show Import Options checked. When viewing the Data Source Import Options dialog, I set the following options—Delimiter:Comma, Encoding:Unicode, Platform:Macintosh. I leave Preserve Spaces in Data Source unchecked. It fails to import any variables and produces no error message. I have tried other CSV files as well (created TextEdit, Espresso, etc.) and it seems that InDesign will not import any files if Unicode is specified as the encoding, no matter which other options are specified.
Can anyone else confirm this?
Importing as ACSII works, but obviously does not display my content correctly.

Mike is having some trouble posting in this thread (and I am too), but he sent me a PM with what he wanted to say:
OK. I think I might have a positive answer for you.
I was getting lost in the upper ASCII characters you showed. In your test file I never could see any--a case of not seeing the trees for the forest.
Your quote marks are getting dropped in your test file. Now, this may or may not affect other factors but it does in some further testing. I believe ID has an issue with dropping quote marks even in a plain ASCII file if the marks are at the beginning of a sentence and the file is tab delimited. Call it a bug.
Because of all the commas and quote marks in your simple file, I think you should be exporting from Google Docs' spreadsheet as a tab-delimited file. This exported file has to be opened in a text editor capable of saving it out as a UTF-16 BE (Big Endian) type of file.
Also, I think you are going to have to use proper quote marks throughout, or change them in the exported tab-delimited file. Best to have a correct source, though.
Here is your sample ZIPped up. I think it works properly. But then again, I think I might be bleary-eyed by now.
http://www.wenzloffandsons.com/temp/merge_psalms_utf-16.zip
Take care, Mike

Importing Business Contetnt Provider .car file failed

Hi Friends,
The importing of Business Content Provider (BCP) .car file failed in MSY. I have a crystal report which uses this BCP. I want to import the BCP first then the reoport but, i could not import the BCP. It is saying that "process completed with errors". I don't have the entry of this BCP in the MSY or in the table SMOBCP.
Could you help me to import the BCP.
Thanks in advance.
Best regards,
Swarna Seeta

Hi Swarna,
Import Export tool provided as part of MSY application is not very reliable i.e. it is very common to get "Process completed with errors" message while using it. Sometimes even if it gives this message, the entries will get inserted in the database. In your case it has not worked.
The best option is to open an OSS for SAP to look into it.
regards
Vivek

Importing media file(MP3) fail

So i was going to run through some test's so I can get some basic lipsync. I recorded some audio and then proceeded to import. i when to file, imported and then clicked the file. after it loaded, nothing happened. Can someone explain this?

hi!
what?
2010-03-16
Fang
发件人: joekuli <[email protected]>
发送时间: 2010-03-16 13:44
主题: Re: Importing media file(MP3) fail
收件人: fang alvin <[email protected]>
hello?

Problem with "Edit in Photoshop" and Lightroom 2.1 failing to import new file

I am a new user to Lightroom, so I won't be surprised if the problem is at the dull end of the keyboard...
I am working with Lightroom 2.1 (still in my 30-day free trial), Photoshop CS3 with ACR 4.6, on Windows XP (fully updated). My image files are mostly .cr2 files (canon raw).
When I "edit with photoshop" in Lightroom, it fires up Photoshop and brings the file up for edit as expected. Photoshop shows the file name as something like _MG_2326.CR2, as (I presume) expected. When I'm done editing in Photoshop, and I save the file, Lightroom brings up a message "The file could not be imported because it could not be read." and "It may be an incompatible format." on a second line.
If I synchronize the folder in Lightroom it picks up the save file without issue (though its not automatically stacked with the original).
I have tried messing around with the different options in the preferences "external editing" tab -- file format, color space and bit depth (I can't imagine resolution would matter). No joy there.
I have also tried setting photoshop up as the additional external editor and if I do that it works correctly. However, in this case, it makes a copy of the file before opening photoshop which slows things down a little.
Is this a problem that anybody else has seen before? Any solutions or work-arounds?
Thanks,
Doug

I'm back trying to sort this problem out (got distracted for a couple of days by trying to get my monitor calibrated).
Rearranging the folder structure didn't help. But I now have a better organized catalog, so that's ok :)
What I did find is that if I import files into lightroom using the "file/import photos from device", then I can edit them normally afterwards (that is, when I save the file in photoshop cs3, the new file gets picked up correctly by lightroom and gets correctly stacked with the original). This is true even if the new files get added into the same directory structure that I'm having troubles with.
So it looks like the directory structure is a red herring. It looks like the problem is in the catalog, with the way that lightroom originally imported my files. I created my original catalog by allowing lightroom to read my elements 6 catalog.
It seems that I have this edit problem with all catalog entries that were imported from elements 6, but I don't have any problem with catalog entries that lightroom brings in directly (either through "import photos from device" or by adding a new folder to the lightroom catalog).
So right now it looks like there is a problem with the elements catalog conversion.
Is this a problem that anybody else has seen? Any suggestions for getting around it?
Doug

My lightroom 4 will not import my files from my compact flash card . It has been working for years with out fail but now there is no import previews and it says the files are not recognized by raw format support in LR

I have lightroom 4 I've had it for years and it has imported my raw files from my CF card without issue . Now when I plug in my CF card to import new files it says import operations not performed and there are no image previews . When I continue by hitting "import" I get a pop up window that states "the files are not recognized by raw format support in Light Room"

Don't feel too bad. If the D4S has as many menus and custom functions as my Canon 5D Mark iii its easy to get messed up.
If you downloaded from the link I gave you it will be Lr 5.4. The link was just to show you when the D4S was supported. The newest version is 5.7.1 and can be downloaded here. Don't know your OS so you will have to pick Windows or Mac. Product updates
On my Mac I just run the downloaded installer program (its a full version and not an small update) and it installs the new version and erases the old version. If you are on Windows you will have to get help from a windows person.

Importing .odt file fails

Similar Messages

Maybe you are looking for