Importing older Camera Raw-adjusted RAW files with XMP sidecars

When I import CR2 files (Canon RAW) that have XMP files alongside them into my Lightroom 4 catalog, Lightroom correctly reads image adjustments from XMP files and assigns them as Develop settings for the newly imported photos. This is how I expected it to be. Lightroom assigns older process version to these files, as it should be.
One quick question I have though: once I imported all these CR2 files into my collection, is it safe to delete all those XMP sidecar files immediately? I assume that Lightroom stores all Develop settings in the catalog file at the moment of the import and that XMP sidecars are no longer necessary. Is that correct? Or do I have to enter the Develop mode with each imported file first, before deleting the XMP in order to make old settings to "stick"?

So, that's what I did. I successfully imported my pictures into my catalog and then deleted all XMP files (or, more precisely, backed them up in a different location).
However, Lightroom still remembers that my pictures used to have sidecar XMP files. The Metadata window still says "Sidecar file: xmp". And, more importantly, absence of XMP files triggers errors when I attempt to move imported pictures from one folder to another inside Lightroom. Lightroom report errors for each file that used to have a sidecar, listing all missing XMP files in the error window. The move operation completes successfully though, but Lightroom still refuses to forget about the XMP sidecar even after the file is moved. Next time I attempt to move the same picture, the same error window pops up again.
How do I force Lightroom to forget about XMP files for pictures that were originally imported with XMP sidecars?

Similar Messages

PSE 12 is not supporting camera raw files with my nikon d4s

I am using PSE 12 to edit pictures. I just purchased a Nikon d4s and neither the organizer nor the editor lets me open the raw file. It says the camera raw file is not supported. I just downloaded camera raw update and it still does not work

Which operating system are you using?
Did you try Help>Updates from within the pse 12 editor to get camera raw 8.5, which should then enable both the pse 12 editor and organizer to open those files.

Aperture imports Lumix GF2 RAW files with strong green colour cast

I'm using Aperture 3.3.1 with Digital Camera RAW 3.14.0 built 6460000.1 and iPhoto 9.3.1
When importing RAW files from my Panasonic Lumix GF2 into Aperture, the initial thumbnails are fine (it displays those embedded in the RAW file), but when Aperture has finished its processing, thumbails and full size images are dark and green - it seems only the green channel has been taken into account.
When importing the same photos in iPhotos, they look normal, with all their colours.
If I open the iPhoto library with Aperture, the photos are fine as well.
This is the first time I import photos since updating Aperture, iPhoto and Camera RAW a few days ago - I had the previous versions from before the updates issued around the last WWDC event.
I would have assumed iPhoto and Aperture use the same Camera RAW engine so I don't understand how Aperture is "broken" but not iPhoto.
Any ideas for the resolution of this issue are welcome.
Thanks.

I applied the solution found on this this page:
https://discussions.apple.com/thread/3948457?start=0&tstart=0
Read the instructions carefully as there is a space to remove (introduce by the line break in the forum), then you need to reboot your Mac.
I solved my problem for new image imports. Regenerating the thumbails of already imported images didn't change anything. I gues this was because my issue was not just with the thumbails, but the whole image, without the Quick Preview feature activated.

Canon 5d mark iii camera raw files with CS3

Hi, I recently bought a Canon 5d mark iii camera and am having difficulty viewing the raw files on my Mac. The Mac operating software is 10.5.8 and the mac doesnt have intel. Photoshop software is CS3. I have looked at various plug ins but am struggling to find one that will work. Is there no option to me other than buying a new laptop with the latest photoshop or is there a workaround? Thanks in advance for your help, Mike

Here's the bottom line:
You will never be able to open the image files from your Canon 5d mark III directly in CS3, because that camera model was first supported in Camera Raw 6.7 (which only works with CS5) and 7.1 which only works with CS6.
However, you can download the free Adobe DNG Converter 7.1 and convert your Canon raw files to raw DNGs that you can open with any version of ACR starting with ACR 2.4, which takes you all the way back to CS1. Therefore, you'll be able to open them in CS3 with no problem.
Get the latest version of the Adobe DNG Converter, it is a stand-alone application that is not tied to whatever version of Photoshop you happen to use. The current version is 7.1 and there's also a beta version 7.2RC1.
Yes, if you can afford a Canon 5D Mark III, you can afford to upgrade from CS3 to CS6 for very little money ($199 for a perpetual license) if you act fast. CS3 will be out of the upgrade loop in late December or so.
I'm one of the many to whom the prospect of buying into Adobe's subscription mode and end up paying the Adobe tribute every month for life seems nothing less than repulsive.
With that camera (a rich man's camera) is silly to be using a laptop (a beggar's machine). Get a decent desktop Mac or PC already!

Lightroom bug with GPS in raw files with XMP

I'm quite sure I've stumbled upon a bug in Lightroom. I look in my XMP file and I see my GPS info:
38,53,25118N
77,1,90390W
But in lightroom, it loads the coordinates as:
+58° 52' 25.00", -82° 14' 53.00"
Now I was thinking something was just wrong in the XMP file, so I load the same image in Bridge and I see the correct GPS information. So I know it's a problem with Lightroom.
I searched the forums and haven't found anyone else reporting this bug. So now I'm kind of stuck. Can anyone confirm or deny this behavior? I'm processing hundreds of images from my last vacation and I am really stuck here because I can't continue until this is fixed and the chances of it getting fixed any time soon seem pretty slim.

After hours of painfully trying everything imagineable, here is what the problem is:
I downloaded the images to my PC using Downloader Pro (Breeze Systems) and initially viewed them with Bridge. Using a Windows XP in French. Apparently Downloader Pro used a comma instead of a period. Bridge understands it this way, as it's just a separator. However LR does not.
To fix it, I had to delete all my images from the library, then by hand modify each XMP and change the comma to a period. Then reimport into LR. I tested this on a few images and it works. Now I'm off to do the rest of the photos of my trip.
I'll report this to Breeze Systems as well, as I think it actually originates on their end. It'd be nice if LR could still read it like Bridge does. It seems LR is more strict and that's the problem. This could be considered a bug by LR as well since instead of ignoring the GPS coordinates or giving an error message, LR seems to calculate it and ends up being way off. For example, I was shooting in washington and all my photos showed up as being in North Dakota, Canada, South Dakota, etc.

Will elements 11 support camera raw files from my nikon D7100?

Will elements 11 support my camera raw files from my Nikon D7100?

Yes, pse 11 should support the D7100 camera raw files with the camera raw 7.4 plugin update.

I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put ab

I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs. What am I missing?
Thanks,
upsjdris

Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
You can set Aperture to import raw, jpeg, or raw&jpeg.
If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
Photos > Use Raw as original.
Regards
Léonie

Importing RAW files with keywords from Bridge

Hi everyone,
I downloaded the trial version of Aperture and have now imported RAW files (Canon 20D) with keywords and IPTC data applied via Bridge.
The import of the RAW files was no problem however the files lacked the keywords and IPTC data, which I applied in Bridge.
I also tried to import JEPG files and here Aperture could show me keywords and IPTC data.
Why does this not work for RAW files? What do I have to do in order to get it to work?
Thanks in advance for your advise
/David

When you add metadata (keywords etc.) to most proprietary raw formats (including Canon .CR2 files), Bridge doesn’t know how to embed that data in to the file—Canon and other manufacturers haven’t told Adobe (or anyone else) what the structure of these raw files is and how metadata can be stored within the file itself. Therefore, Bridge creates a ‘sidecar’ file to go with the raw file: the sidecar file sits alongside the raw file, with the same filename and a .xmp extension. This sidecar file contains any metadata you may have applied, as well as adjustments you have made in Adobe Camera Raw.
Unfortunately, Aperture doesn’t read these sidecar files when importing raw files, so you lose any adjustments from ACR (not surprising, since Aperture is obviously a different raw converter to ACR so the adjustments would be different anwyay), but also you lose any metadata you may carefully have applied.
There may be an answer, however. But it’ll cost. That would be to use iView Media Pro (which has recently been bought by Microsoft, but a Mac version still exists). There is a 21-day free trial for iVMP—since my suggestion is to use it as a temporary conduit for importing all your existing raw files into Aperture, you won’t necessarily have to pay the £129 GBP asking price for iVMP (others can debate the morality of that statement, however; fortunately I already owned iVMP and so didn’t have to worry about such things). I believe iVMP can read the XMP sidecar files created by Bridge. Create a new iVMP catalogue with all your raw files which you want to move into Aperture. It should bring all your existing metadata into the iVMP catalogue as well.
Then, import all the raw files into Aperture. As you have found, they’ll be without any metadata. As long as the filenames are the same in both the iVMP catalogue and the Aperture library, you can use Adam Tow’s application Annoture to transfer metadata from the iVMP catalogue into the Aperture library.
Sort of circuitous, but possible. If only Aperture read the metadata from those sidecar files, eh? If I’m wrong in thinking that iVMP imports the XMP metadata, then what you can do is get Bridge to convert all your .CR2 raw files into .DNG files. If you don’t know about DNG, read about it at Adobe. But briefly, Bridge is able to embed its metadata into the DNG files and iVMP is able to read that embedded metadata when importing DNG files into the catalogue. I know that for certain: I used iVMP and DNG files (from my own 20D) before using Aperture; when I started using Aperture (which I love, now) I used Annoture to transfer all my metadata from iVMP into Aperture.
Perhaps someone else will explain this better than I.

How to import camera raw-files as DNG-files using AppleScript action in the Aperture's Import menu - does such a script exist?

I'm looking for a smart way to set up an Aperture 3 workflow - where my propriatary camera raw files get converted into DNG-files when I import my files into Aperture. Aperture's Import menu allows for an Apple-Script to come into action as part of the Import settings. I was thinking if it would be possible for an AppleScript, as part of the import routine, to automatically send the files through the DNG converter app and back into Aperture? So that when the files were finally imported into Aperture they would be DNG-files?
Greatful for any answers and ideas!

Thanks for a swift reply Frank! I will have to use the Adobe DNG converter then, prior to importing into Aperture.
Yes, OSX does support my Nikon D600 NEF-files. But once in a while I want to be able to use features found in other raw apps, within my overall Aperture workflow, but without ending with a TIFF or other 'destructable' file format when continuing my workflow back in Aperture. This should be possible using the routine described here: http://www.apertureexpert.com/tips/2013/8/28/guest-post-catapult-and-aperture-3. html
In my case the problem is that my "old" CS5 version of Photoshop cannot be updated to read D600 files (even though CS5 is not even 3 years old) - I would have to buy a newer version of Photoshop and I have absolutely no intention of doing that. And so I have to find a raw file fomat that is readable by both apps.
On a second note there is a discussion about what raw format is likely to 'live the longest' - also be accessable in 20-30 years. Some say that DNG stand a better chance here than propriatary ones. But I don't know about that and that is not my issue here.

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh

I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera. However it is not opening the images in camera raw. What can I do?

I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera. However it is not opening the images in camera raw. What can I do?

Close and restart Photoshop if you have not already done so.
In Photoshop, go to the Help - About Plug-in... menu then choose Camera Raw. What version does it say there?
-Noel

When I import video and place it into timeline as a raw file with no fx or any added processing I get the message that the video is unrendered and therefore it doesn´t playback?

When I import video and place it into timeline as a raw file with no fx or any added processing I get the message that the video is unrendered and therefore it doesn´t playback?

FCE can use DV or AIC video formats natively. Any other format will need to be converted to one of those two if you want to avoid constant rendering. The clips you use must match the Sequence settings.
-DH

Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with PSE 12 when purchased recognize the cameras listed in the question or do I need to

Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with PSE 12 when purchased recognize the cameras listed in the question or do I need to download the camera Raw Version 8.3 ?

While the G9 RAW files can be read by Adobe Camera RAW and Lightroom, these file are unsupported at this time. Here is a link to Adobe's latest list of cameras that are supported and this list came out yesterday http://www.adobe.com/products/photoshop/cameraraw.html
I have not done a comparison between Lightroom and Canon's software but others have and say that Canon's software is clearly better. I am sure when Adobe updates their software again to include the G9 it will be a very good RAW converter as it is will most other cameras.

Import camera raw files from Canon 70D to PSE 10

I downloaded the new DNG converter, and I am still unable to open the camer raw files. Please help!

You need to use the DNG Converter 8.4 to create DNG files from the CR2 files, then PSE will open those DNG files.

Having trouble opening camera raw files. Already downloaded Camera Raw Update for Photoshop CS5. I have a pc.

Please Help? Having trouble opening camera raw files. Already downloaded Camera Raw update. I have a pc.

If the camera is fairly new then the version of ACR you have with CS5 won't be able to read those file. You'll need to upgrade to a newer version of Photoshop or use Lightroom 5.
Once a new version of Photoshop comes out Adobe does not support updating ACR from the older version of PS.

Importing older Camera Raw-adjusted RAW files with XMP sidecars

Similar Messages

Maybe you are looking for