Importing Photoshop saved jpeg into Word Mac 2008

When I save as jpg in Photoshop CS3, Word Mac 2008 does not recognize the file and I cannot import. Tried a work-around, by first flattening the file in Photoshop before the save as jpg. Still does not work. Any suggestion welcome!

ellyn,
I just dragged two different .jpgs created in PS CS3 into a new Word 2008 page; then I resized and rotated them. One was a medium quality 268K; the other was optimized for Web and devices, 160K. I also tried the same images via Insert Picture from File.
No problems either way, so I'm not sure what is going on, unless your .jpgs are cmyk and perhaps Word does not accept that format.
Neil

Similar Messages

Recorded action (in word:mac 2008) not working

Hello. Here's what I do: I create a new workflow in Automator (cmd-N) and choose 'Custom' as starting point. Then, I open a .doc (from word:mac 2008), then start recording, back to the .doc click somewhere into the open .doc window), click into a footnote, press cmd-A (selects all footnotes), choose Convert to Endnote from the contextual menu, save and close. (What I get is an action with three blank steps, namely step 1, 2, and 4. 1 would be clicking into the .doc window, 2 clicking into the footnote. 3 is: Press cmd-A. 4 is blank again, and I am clueless about what this one might be. 5 is Convert to Endnote, etc.)
I rename the action, and save it as an application. Then I drop the same file who's copy I used to record the action onto that application. In the menu bar (top of my screen), it says 'Watch me Do' for a little while (red octagon next to it), then disppears. I open this file I had dropped on the app, it's unchanged.
Appears to me I'm missing something so fundamental it's not covered by tutorials. Any advise? Thanks a lot.

that works, thanks.
Each action consists of two parts: one that starts with ––, then names the action (blank if no name for this step appears in automator), and the second that entails the description of the action itself.
I record the sequence again, leaving out the first click into the .doc, clicking into the footnote straight. Then I highlight all actions recorded by automator, copy, and paste into Script Editor. This is what I get:
delay 1.727666
set timeoutSeconds to 2.000000
set uiScript to "click UI Element \"Document Pane\" of window 2 of application process \"Word\""
my doWithTimeout( uiScript, timeoutSeconds )
delay 1.815997
set timeoutSeconds to 2.000000
set uiScript to "click UI Element \"Document Pane\" of window 4 of application process \"Word\""
my doWithTimeout( uiScript, timeoutSeconds )
-- Press ⌘A
delay 0.135988
set timeoutSeconds to 2.000000
set uiScript to "keystroke \"a\" using command down"
my doWithTimeout( uiScript, timeoutSeconds )
delay 1.657981
set timeoutSeconds to 2.000000
set uiScript to "click UI Element \"Document Pane\" of window 4 of application process \"Word\""
my doWithTimeout( uiScript, timeoutSeconds )
-- Convert to Endnote
delay 5.327995
set timeoutSeconds to 2.000000
set uiScript to "click menu item \"Convert to Endnote\" of menu 1 of UI element 1 of application process \"Word\""
my doWithTimeout( uiScript, timeoutSeconds )
-- Press ⌘S
delay 1.840010
set timeoutSeconds to 2.000000
set uiScript to "keystroke \"s\" using command down"
my doWithTimeout( uiScript, timeoutSeconds )
-- Press ⌘W
delay 2.583996
set timeoutSeconds to 2.000000
set uiScript to "keystroke \"w\" using command down"
my doWithTimeout( uiScript, timeoutSeconds )
on doWithTimeout(uiScript, timeoutSeconds)
set endDate to (current date) + timeoutSeconds
repeat
try
run script "tell application \"System Events\"
" & uiScript & "
end tell"
exit repeat
on error errorMessage
if ((current date) > endDate) then
error "Can not " & uiScript
end if
end try
end repeat
end doWithTimeout
That makes me ask two questions:
First: Why does it talk of window 2 and 4, when I had only one window open, and what I did while recording was one click into the footnote section and then go straight ⌘A?
Second: Automator doesn't realize that it's a footnote I click into, and that consequently pressing ⌘A selects all footnotes (not the whole main text). Since that doesn't seem recordable, a first step might be to write it manually—if such a thing is possible. Since Microsoft has deprecated VBA Macros and recommends using Apple Script instead, I hope it might. Is it? Or how else?
Thanks

OS X Yosemite 10.10.1 and Microsoft Word: Mac 2008

I installed OS X Yosemite 10.10.1 and am currently having troubles with Microsoft Word: Mac 2008. I cannot type into documents that I open. Strangely enough, I can copy into documents, but unfortunately, I can do nothing to edit open documents since I still cannot type. I view my documents in Print Layout format. Is there something I can do to get my Word software working again?

Try un-installing Office and then re-installing.
Office 2008 Removal

I have scanned photos using an Epson V500 scanner set to jpeg format using the least compression (highest quality) setting. When I try to import the scanned jpegs into iPhoto I get an error message saying "The file is an unrecognized format." But if I

I have scanned photos using an Epson V500 scanner set to scan using jpeg format at the highest quality (least compression) setting. When I try to import the scanned jpegs into iPhoto, I get an error message from iPhoto saying "The file is an unrecognized format." But if I reduce the quality setting on the Epson scanner to just slightly below highest quality, the images import into iPhoto just fine. Why won't iPhoto accept jpegs scanned at the highest quality setting? Wondering?

What scanner format settings dis you use? Are these color photos? If they are B/W did you scan as grayscale images? That could be the problem.
Are you able to open them with Preview? If so do a Save As, select full quality and save as a jpeg with a new file name. See if that file will import and work as intended.
OT

Beim Erstellen eines PDF in WORD MAC 2008 über Drucken/als PDF speichern sehe ich Schriftart DIN Light/Medium (in Textfeld gesetzt) im Acrobat keine Buchstaben

Beim Erstellen eines PDF in WORD MAC 2008 über Drucken/als PDF speichern sehe ich mit der Schriftart DIN Light/Medium (in Textfeld gesetzt) im Acrobat keine Buchstaben sondern erhalte ein weißes Blatt und eine Fehlermeldung: "Die eingebettete Schrift "ADMRRZ+DIN-Light" konnte nicht entnommen werden. Einige Zeichen werden u. U. nicht korrekt angezeigt bzw. gedruckt." Bei jedem Speichern stehen vor "DIN-Light" neue Hyroglyphen. Auch werden einige Symbole (eingefügte Pictogramme) nicht korrekt angezeigt. Wenn ich das PDF in Vorschau vom Mac öffne, ist (bis auf die Symbole) alles ok. Wenn ich ein PDF aus IND CS6 schreibe, funktioniert es mit der gleichen Schrift ohne Probleme. Das Problem besteht seit den beiden letzten Updates von Acrobat X.

Importing a regular DVD into my Mac and the Burned

To whom it may concern,
Hi I'm trying to import a regular DVD into my Mac, but when I try to used imovie the folder containing the files is grey and I can't do anything I'm not sure if this is the best way to import a DVD (movie) and then burn it so I will have a copy. The movie that I wanna import is not an original copy is a copy of the original, but it work on any DVD player as well as in my Mac. I watched all the tutorials and none of them give me a solution. I would appreciate if someone can advised me in this matter.
Thanks and Regards
Do I need a different program?

If the DVD you are trying to copoy is a DVD-R that you made, then this may help you:
How to copy previously-burned DVD-R video discs
http://support.apple.com/kb/HT2059?viewlocale=en_US
It will not help, however if it is a protected DVD.
Sue

I forgot the password of a word:mac 2008 document...how do I get it open?

I forgot the password of a word:mac 2008 document...how do I get it open?

I suggest you post your question on Microsoft's own forums for their Mac products, as it's their software you're having issues with:
http://answers.microsoft.com/en-us/mac

Importing Photoshop RAW images into Aperture

When I import Photoshop RAW images that I have made adjustments to, into my Aperture library, they show up as the original RAW files and not with my adjustments. Is there a way to get the RAW adjustments imported as well.
The only reason I need to import them into Aperture is to post them in a web gallery. Or is there a way to create a ME web gallery directly from Photoshop files? How about creating a ME web gallery directly from Lightroom? Anybody have a clue?)
(Btw, in attemtpting to research this topic, I find I am totally unable to do a search of the discussions. Even with a search word like "Aperture", I get no messages. Not matter what search word I enter I get no messages found. ???)
Thanks!
Jim

Thanks for the reply Allen.
I am saving them all as TIFFS now. I was just trying to avoid that time-consuming step. I do not really need them as TIFFS right now. It is to show edited RAW files to a client. Later, when selections are made, I would save that much smaller number of images as TIFFS. But it seems that there is no other way to import the RAW files with the edits into Aperture.
I used to create all of my web albums for clients in PS. But once I got a .mac account, I love and prefer the look of the .mac web galleries. But of course that necessitated importing all my PS files into either iPhoto (not an option) or Aperture. But can these PS web galleries be exported to a .mac web gallery?
Thanks!
Jim Cox

Photoshop CS6 files into Word 2011?

When I import a photo file from CS6 for MAC, 1x2" at 300 ppi, into Word 2011 for MAC on my new MacBook Pro, the file is importing to fill the page width. When I import a similar file from my old CS2 on the same new computer, the file imports at the correct 1x2" size. I think there is some setting I need to change in CS6, but have been through every place I can find to look. What can I do to fix this?

Don't have retina display. Just realized images are importing to Word 2011 sized at 72 ppi rather than the 300 of original file. That is why size is coming out so large. There must be somewhere in CS6 that is doing this. Apparently, in CS5.5, there is a place to change this under Photoshop>options>, but this choice does not show up in CS6, and I can't find anything similar under Preferences. Any ideas?

I am trying to import my own clipart into Word, any easy ways to that. I am using images from Google but have trouble importing into Word

I am trying to import images from Google into a Word document and would like the easiest way to do that.

You would probably be best served by posting your question on the Office for Mac Product Forums .

Gray background issue when inserting a Jpeg into word.

Good Day,
I created a logo image in AI and exported it to a Jpeg file. When I insert it into Word 2014 it prints out as having a light gray back ground. When it's in either AI, PS or Word it looks great with no sign of the gray background. Does anybody have an idea how to fix it? I'm creating our company logo and it wouldn't look good if our customers saw the same background color. Thanks in advance.
Ben

What kind of color mode is the JPEG? RGB or CMYK?
Have you opened the JPEG in Photoshop and measured the background - which volor code is it?

Import photoshop CS3 layers into Flash CS5?

Does anyone know if you can import photoshop layers from CS3 into Flash CS5? I am looking to get Flash CS5 for my Win 7 but am worried I won't be able to use it with all my CS3 photoshop work. Has anyone had experience with this and can tell me one way or the other if it does or doesn't work. I know CS5 has LOTS of backward compatibility problems.
Thanks.

Yes, save the photoshop file as a .ps file and then import it in Flash. You will get pretty much the same import options window that you saw in Flash CS3.

Images exported from iPhoto 6 cannot be inserted into Word:Mac OSX document

I recently bought a new camera (Nikon D90). I have no problem importing the photos into iPhoto 6 as jpgs, but I am unable to insert the photos (in jpg format) into Word OSX documents. I get a message that says "This application cannot open this file. This file is an unsupported graphic format or may be damaged. Try opening the graphic in another application". I never had this problem with any of the other 3 cameras I have used (Sony and Canon). Has anyone experienced this problem?

Brad
What settings did you use in the Export Dialogue?
When you go File -> Export you get a tabbed box with various options. In the File Export tab you can choose to scale the pics, or keep them the same size, change or retain the format.
Regards
TD

How to handle hyphenation while saving pdf into word file by Acrobat XI

Hi All,
When I am saving my searchable pdf file into word document hyphenation at the end of line are appearing with a space in word file.
Any idea to handle such cases.
Thanks
Karan

This has to do with the way the file was originally created. There's
nothing much that can be done about it, except for running a Search&Replace
command in Word to remove any hyphens followed by a line-break.

Can't create labels w/ graphics in MS WORD MAC 2008

Hello!
I am using MS Word for MAC - version 2008 and can't for the life of me create a page of labels with a graphic.
The old 2004 version worked beautifully. I could pull up a blank template (ex. 5160), group the graphic and text box in one cell, then select "Tools -> Labels" and that would create an entire page of that design. I got the 08 version, and now I can't do a thing. That process just gets me another blank template.
Not sure how many people use word for this kinda thing... but ANY HELP would be GREATLY appreciated! Even if it means using another program.
Many thanks!

You should really consider posting your question on the Word forums: http://www.officeformac.com/productforums as Apple discussions only provide support for Apple products

Importing Photoshop saved jpeg into Word Mac 2008

Similar Messages

Maybe you are looking for