Importing Portal Business packages

Hi,
I am trying to import Business packages through
System Administration->Transport Packages->Import.
While downloading the packages, I have received as *.SCA from service market place. But in portal, it is accepting only *.EPA files.
How can I upload these business packages through portal?
Thanks
Mohan

Hello Mohan,
If you are using NW2004s you can also use JSPM to install business packages. It takes care of the sequence of installation as well.
All you need to do is copy these sca or all the installation files into the directory : \usr\sap\trans\EPS\in
Then go to : usr\sap\TES\DVEBMGS01\j2ee\JSPM folder under j2ee. and start the tool. It is fast too.
regards
Atul Shrivastava

Similar Messages

  • Unable to import CRM Business Packager in the Portal

    I have downloaded the Business Package for CRM, but it was in Zip file.
    I was unable to import it in the Portal since EP6 format has to be in epa not zip?
    Please advise.
    AA

    Hi,
    CRM 4.0 Business package is available for EP 5.0 and above. When importing the business package do pay attention that you import a zip file that contains objects that are EP 5.0 version compatible such as files ending with the "PKG" extension. "EPA" extension is acceptable from EP 6.0 on.
    The package content will be available at "migrated content" in your PCD, after the import process is done.
    Regards,
    Haguy

  • Portal Business Package URGENT ( I award Good points)

    Dear Portal Gurus,
    When I'm importing a business package there is an option  which says "Client" / "Server"
    Can anyone explain to me what each mean and when to use them.
    Appreciate your help greatly.
    Thanks,
    Harsha

    Srinivasa,
    I am unable to open your blog.
    Can you pls email it to me at [email protected]
    Thanks.
    Nirmal
    Message was edited by: nirmal jct
    Message was edited by: nirmal jct
    Message was edited by: nirmal jct

  • Portal Business package  for  RE-FX navigation

    Hell All,
    Can some one give an idea of how to apply Portal Business package  for  RE-FX navigation . Our system versions are ECC6 , EP 7.0 and CRM 5.2.  We would like to have  Portal Business package  for  RE-FX  applied on  our CRM 5.2 system . Can some one shed some light on this.
    Thank you all in advance

    Hi Subra,
    To know about business package for SAP NetWeaver Portal, please check the following tool:
    http://www.sdn.sap.com/irj/sdn/portal-content-portfolio?rid=/library/uuid/70a5554a-3c69-2c10-c0af-88cf15099a51
    And, For SD Module specific BP, you need to consult with your SAP SD functional team because there are so many BPs have different set of applications and application suites.
    e.g. Business Package for Internal Sales Representative is used within the sales organization.
    Thanks
    Gautam Singh

  • Problem in importing ESS Business Package in EP 5.0

    Hi
    I am aiming at importing the ESS 4.6C Business Package which is a zip file into EP 5.0. At the time of import i receive a prompt saying that the files with only the following extensions can be imported into the portal.
    The file extensions that can be imported into the portal:
    CDF, XML, IVU, PCK, IVS, PAG, PGS, ROL, FLD, PIV, TPL.
    Can anyone suggest the method of importing the ESS Package into EP 5.0?
    Thanks in advance
    Regards
    Priya

    Hi
    Check the zip file to see if there is a .pkg file, the pkg file contain definitions on what are the associated files (CDF, XML, IVU, PCK, IVS, PAG, PGS, ROL, FLD, PIV, TPL). Try importing the pkg file (unzip zip).
    Regards
    Pran

  • Fail to import ESS business package..Urgent!

    Dear All NWDI expert,
    I have installed the NWDI and trying my first step to customize the standard ESS business package. We are on ESS business package 13.
    The following are the list of step that i have done. Can anyone tell me which step i make mistakes?
    Step
    1) Create a new track and assign the SAP_ESS release 100 to the track
    2) Copy the 3 files SAPBUILDT13_0.SCA,  SAPJEE13_0.SCA, SAPJTECHS13_0.SCA into E:\usr\sap\JTrans\CMS\inbox.
    3) "Check IN" the 3 files and check in. Then "check import" and import the files.
    4) Copy the SAPPCUIGP09_0-20001215.SCA and SAPPCUIGP09P_1-20001215.SCA into E:\usr\sap\JTrans\CMS\inbox.
    5) "Check IN" both file and "check import" for the pcuigp sca files.
    6) Import both of the file which is the original file and patch.      **(Do i need to import the patch file as well? I did not manage to import the patch file and the status shows outdated )
    7) Copy the SAPESS09_0-20000512.SCA and SAPESS09P_3-20000512.SCA into E:\usr\sap\JTrans\CMS\inbox
    8) "Check IN" the 2 files and check in. Then "check import" and import the files.
    10) Import the 2 files.*(the system show import fail and i hav to repeat all over again by creating a new track)
    When i try it for the second time, i am getting the import fail error again and below are parts from the files.
    target="_blank">39d5b802352211dcb4890030057116fe</a> exists allready in the repository. No import necessary.
    20080422111649 Info   :CBS input mode is currently PRIVILEGED
    20080422111649 Info   :waiting for 10 seconds
    The last fail give me the following log
    20080422163706 Info   :buildspace = E02_BRY_D   build request id = 231
    20080422163706 Info   :wait until CBS queue of buildspace E02_BRY_D is completely processed, before asking for build results
    20080422163706 Info   :waiting for CBS queue activity
    20080422163737 Info   :maximal waiting time is temporally increased
    20080422163737 Info   :build process already running: waiting for another period of 30000 ms
    Anyone know which step that i perfrom incorrectly and how to solve the waiting for another period of 30000ms?
    Thanks
    Regards,
    Bryan

    Hi Bryan,
    Open the CBS Web UI and navigate to the buildspace you are working on.
    a. Choose Edit and select Input Mode = OPEN.
    b. Save the new state.
    c. Try import again.
    Reward points if this solves your problem.
    Cheers,
    Sandeep

  • Error in Import of Business Package

    Hi,
    I am trying to import Asset Service Business Package in EP 5.0. But it's unable to find some of .epa files and hence not uploading the Business Package correctly.
    I have successfully uploaded business package for ESS.
    Is there some problem in the Package??
    Thanks

    Um.. I thought .epa files only came in in EP6.  So you may have the EP6 version of the business package and not the EP5 one.
    Paul

  • Enterprise Portal Business Package for Dealer Poral

    Hello Gurus,
    I am not much into Auto, but what I would like to understand here - is there any Business Package ( Portal Content ) released from SAP which I can deploy and access the VMS and WMS functions over Enterprise Portal.
    If not, are there sets of services available in the backend IS-Auto, which needs to be activated and access over Portal as IAC templates or Transaction iViews.
    This is relatively urgent query and appropriate answer will surely be reqarded.
    Regards,
    Rahul
    Edited by: Rahul Shukla on May 19, 2008 3:48 PM
    I have managed to find the answer for this questions. Thanks everyone.
    Regards,
    Rahul

    Hi, for completeness of the thread and the next one searching for this info.... additional helpfull information.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/89/6cfe9c478147d0a7697eec7f1cbe24/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/c3/f71b9a69574d6c84ac33b68d2d03c3/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/en/fa/61a6bcffd94d02ba8df58a9a0bc596/frameset.htm
    Rgds
    Jim

  • Portal business Packages

    Hi,
    Can we implment SAP business packages like Biller direct, buyer on External Facing portal.
    Also I am unable to find documentation on maintaining multi-lingual External facing portal.
    Regards,
    Namrata

    maintaining multi-lingual External facing portal
    The SAP Portal is multi-lingual by default (incl. left to right, right to left), and the EFP isn't really different from the "normal" portal as the same language identification and content delivery principles apply. It get's more interesting when dealing with anonymous users, WPC content, etc, but nothing really over complicated.
    br,
    Tobias

  • Which Portal Business packages ?

    Which business package should I deploy to get the Fleet Management functionality in EP 7.0. My backend is ECC 6.0.
    Help highly appreciated
    Thanks
    Sheril

    Hi,
    I think fleet mgmt comes under CS(customer service module) and that i dont know if  we have a BP for CS.
    try this link if u can find details on that
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/0aeb1802e211d39eeb0000e8323350/frameset.htm
    also u can check the link below for BPs provided by SAP
    https://www.sdn.sap.com/irj/sdn/contentportfolio
    Thanks
    Md. Yusuf

  • Importing of business package gives one error!

    Hello,
    I am trying to import BPCRM40602_3-10002661.ZIP (https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/30b2479f-ae6d-2910-ad99-c5844a1faa5d) into Portal 6.0 and am getting following one SEVERE message in the whole process:
    44 / 1125 - Migration of: /com.sap.pct.crm.pad.BPVersionInfo.ivu
    15.01.2006 16:23:46     PCD lookup for : portal_content/com.sap.portal.migrated/ep_5.0/iviews/SAP%20CRM%204.0%3a%20Portal%20Administration/com.sap.pct.crm.pad.BPVersionInfo did'nt find target : Child not found: com.sap.pct.crm.pad.BPVersionInfo at portal_content/com.sap.portal.migrated/ep_5.0/iviews/SAP%20CRM%204.0%3a%20Portal%20Administration no iView template is available
    15.01.2006 16:23:46     WARNING: IView was not migrated successfully due to the following reason: com.sapportals.portal.contentmigration.iview.ExportedIViewException: The PAR file: com.sap.pct.crm.BPVersionInfo.par containing profile: 'default' was not deployed prior to IVU handling, no template iView can be created ,path searched : par:/applications/com.sap.pct.crm.BPVersionInfo/components/default
    15.01.2006 16:23:46     SEVERE: Object was not migrated: Import of iView: com.sap.pct.crm.pad.BPVersionInfo Failed !
    Time for object 109 Milliseconds
    what is the reason for this error message and how do i rectify from this?? Thanks.
    Regards,

    No, this is the only BP version available. The BP that i am trying to import is:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/e0c0bdca-ad6d-2910-f881-bc8202f8f8a9
    and
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/e0c0bdca-ad6d-2910-f881-bc8202f8f8a9

  • Importing Business Package more than once for different systems

    Hi,
    We have a demo portal (EP6 SP12) connecting to various SAP systems. We want to use the same Business Package for two different systems. Is there any way to import a Business Package a second time with a different system alias, without overwriting the first import, so we can point it to a different system?
    Many thanks,
    Jane

    Prakash - I had thought of this, but I would then have to recreate the pages, worksets and roles manually. Also some BPs contain hundreds of iviews so it would be very time consuming to manually edit the system alias on each one.
    Karsten - At the moment, we're interested in the ESS and MSS Business Packages but I would also like to know generally, since I'm sure in the future this will apply to other BPs for us.
    Many thanks,
    Jane

  • Need a Business Package for Vendor Portal with ECC as backend ?

    Hello,
    We are looking for a portal business package which can talk to backend ECC system and has the functionality to create/change/display POu2019s, Invoices, Inventory and reporting functionality. All this functionality needs to be available to Vendors via an External Facing Netweaver Portal.
    I have gone through the list of BPu2019s available at https://www.sdn.sap.com/irj/sdn/contentportfolio and found some BPu2019s available for Buyers which has the above required functionality, however it has exposed ECC transactions directly via Transaction iViews which we cannot expose to Vendors.
    Also there is one Business Package called Supplier Collaboration which delivers the required functionality, but unfortunately we do not have SRM/SUS components in the project.
    Please let me know if you know business package to implement or if not best practices to achieve the functionality.
    Thanks in advance.
    Best Regards,
    Seshu.

    closed
    Edited by: ratnakar reddy alwala on Oct 3, 2008 11:46 AM

  • Portal version required for Business packages deployment

    Hello All
    I have to deploy the following business packages in Portal
    Business Package for Recruiting Administrator 1.41
    Business Package for Recruiter 1.41
    Business Package for Employee Self-Service (SAP ERP) 1.41
    Business Package for Manager Self-Service (BP ERP05 MSS 1.41)
    Business Package for Talent Development Specialist 1.01
    Business Package for Talent Management Specialist 1.40
    Can you please help me find out the portal verison required for them
    We are on currently EP 7.0 SP12
    Rohit

    Hi,
    Check SAP Hinweis 1129139 - SAP ERP Enhan. Pk.1 SPS 05(03/2008) Release Information Note
    Please check below extract from this note:
    Software Components SP Level
    SAP ECC Server VPack
    ECC-VPACK 601 SP05
    ERP VALUE PACK HR 601 SP05
    SAP FinServ Claims Mgmt VPack
    IS-FS-CM 601 SP05
    Portal Content
    BP ERP05 CLAIM CENTER AGT 1.01 SP05
    BP ERP05 CLAIM HANDLER 1.01 SP05
    BP ERP05 EXPENDITURE CERT 1.01 SP05
    BP ERP05 TALENT DEV 1.01 SP05
    BP ERP05 HR ADMINISTRATOR 1.11 SP05
    BP ERP05 COMMON PARTS 1.11 SP05
    XI Content
    XI CONTENT STORE CONNECT.1.0 SP01
    XI CONTENT ECC-VPACK 601 SP05
    XI CONTENT GS1 1.0 SP01
    XI CONTENT UN/CEFACT 1.0 SP01
    XI CONTENT PROMERLAYINTEG 6.7 SP01
    XI CONTENT DEMAND MGMT 1.0 SP01
    Thanks
    Sunny

  • Deploying business packages in Enterprise portal

    Hello all,
    I have to deploy following business packages in Enterprise portal:
    Business Package for Recruiting Administrator 1.41
    Business Package for Recruiter 1.41
    Business Package for Employee Self-Service (SAP ERP) 1.41
    Business Package for Manager Self-Service (BP ERP05 MSS 1.41)
    Business Package for Talent Development Specialist 1.01
    Business Package for Talent Management Specialist 1.40
    I got the procedure for deploying ESS and MSS but not for the rest
    Can you please let me know how do I deploy for recruting and Talent develoment and Managament,I know it is through SDM
    I found the patches for them also on market place but suppose if I want to apply the package
    Business Package for Recruiting Administrator 1.41
    how do I do it?
    Please let me know the procedure
    Rohit

    Hi
    > Can you please let me know how do I deploy for recruting and Talent develoment and Managament,I know it is through SDM
    > I found the patches for them also on market place but suppose if I want to apply the package
    > Business Package for Recruiting Administrator 1.41
    > how do I do it?
    >
    Same you can also deploy via SDM. Could you please explain more what exactly issue is ?
    Thanks
    Sunny

Maybe you are looking for

  • IPhone won't sync after upgrading to Leopard

    My iPhone won't sync, or even show up in iTunes, after upgrading to Leopard. I've tried restarting my Macbook Pro, trying different USB slots, closing and reopening iTunes, everything. Has anyone else had this problem?? I've tried everything apple su

  • A moral dilema

    I'm getting an iPod tomorrow. I am totally geeked! I anticipate zero problems plugging it in and syncing my library. However, my little brother just bought a pc with Vista and he's having a helluva time with his music. I was over there last week and

  • DVD PLAYER CANNOT FIND?

      HI  THIS IS GREAT IF IT WORKS!!   HELP    I HAVE A  COMPAQ PRESARIO F750US NOTEBOOK PC   VISTA  / I AM NOT SURE BUT  I UP GRADED WITH A NEW VISTA CD  AND REGISTRATION KEY CODE/ . . . . AND NOW I HAVE NO DVD PLAYER ? ? ? WHAT TO DO ?   HOPE U CAN HE

  • Please see blog post on post-ECC5 repairs of SQ01/02 generated queries

    We finally found a way to get our repaired program to run from a transaction - the trick is to delete the old transaction which has a user group/query name in it and create a new parameter transaction with the name of the repaired program as the repo

  • W520 Paint Rubs Off

    Hello everyone! My W520 is only a couple weeks old, and already the paint on all four top corners has completely rubbed off (the corners are shiny) and there is a smudge on the top of my computer of permanently rubbed-off paint. I'm EXTREMELY careful