Importing Premiere Pro project to Premiere elements 9

Hi,
I have an a project that was started in premiere pro. I was told when I bought Premiere elements 9 that my previous project would open up in premiere elements 9. Can anyone tell me how I can do this?
   Thankyou in advance for your help.
Cheers,
Catherine

http://forums.adobe.com/community/premiere_elements
You will get better advice over at the Premier Elements forum. Good luck.

Similar Messages

  • After Effects export as Premiere Pro project weird PAL/NTSC problem

    This post is not a question. It's here, because I've found a solution and want to share with You.
    I've noticed a strange problem during export from AE to PR.
    Ok, here I go.
    AE = After Effects CS3
    PR = Premiere Pro CS3
    My AE project is D1/DV PAL Widescreen. It is a sequence of slideshow with some video effects applied. I needed that sequence in PR. I was happy to find a new feature - export as premiere pro project (new for me - i am pretty rookie ;). Thaks to this feature I have saved most of my disk space that is always to low. But, like every first try, this one was not perfect too. I had two problems.
    Problem no 1.
    I opened exported project in PR and saw message like "video effect AE.CC COMPOSITE not present".
    Whole composition was working perfectly except that one video effect that was fundamental for this project.
    *Solution was as easy as it can be. I've just copied that effect from AE plugin folder to PR plugin folder. It worked for this.
    Problem no 2
    Like says AE Help "When you export an After Effects project as an Adobe Premiere Pro project, Adobe Premiere Pro uses the settings from the first composition in the After Effects project for all subsequent sequences."
    Project settings in PR was exactly D1/DV PAL Widescreen. So where is the problem You ask?
    Therefore why my Timeline works in NTSC 29,97 frame rate if all settings match PAL 25 frame rate?! I don't know.
    *Solution to fix this annoying bug is to create a new project in PR with all settings for D1/DV PAL Widescreen in this case. Than just import that PR project exported from AE. Now timeline works like it should in PAL frame rate.
    That's it.
    I hope this post is helpful, because I didn't find any answer for this here in Adobe forum.
    Adam

    Who's says that Microsoft can't debug?
    I used msconfig, first disabling startup items, -same result.
    Enabled all startup items, disabled all non-microsoft services - AE worked!
    I re-enabled each service in turn until AE crashed.
    The fault was related to an item for a video streaming device I have in my house.  It was Monsoon-multimedia's Vulkano Service.  Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen.  It does load a couple of virtual devices in device manager, and uses a proprietary codec.
    I uninstalled the vulkano streamer application and rebooted the external Vulkano device.  I reinstalled the Vulkano and verified it connected to the device and could stream.  Once it did, I tried AE again and IT WORKED!
    I wonder if simply rebooting the Vulkano would have fixed it.  Its like opening the garage door to turn on the refridgerator.
    Thanks for the help!
    Jim

  • Importing Premiere Pro project into After Effects ???

    When I import a Premiere Pro project into After Effects, it splits every shot onto a new track, ending up with a couple of hundred tracks at the end.
    Is there a way to avoid this ?
    Particularly, since I'd want to keep the option of bringing the project file back in Premiere for further editing.
    My colorist suggested that I nest reels of my timeline and split it that way so that when he imports it he has nests on one timeline and the multiple tracks in each of those nests. Still, this feel very clunky.

    An editor at work was using our Avid to do a grade on a short promo and I
    wanted to see what I could do in After Effects. So when he was out of the
    office I exported the timeline as an AAF and copied the OMFI media. When I
    brought the project into After Effects I ended up with a massive number of
    layers and freaked at first at the idea of doing anything with it.
    However I thought about it again and decided to precompose all the layers,
    as this gave me just one layer to work with. I then added a couple of
    Adjustment Layers above it; one with a Levels effect added and the other
    with HSL. I also added Masks to the Adjustment Layers so I could vignette
    any effect.
    The key to working like this was to use Hold Keyframes at the beginning of
    each new shot for each effect, Mask Shape and Feather. I could then adjust
    that shot, scrub to the next shot add new Hold Keyframes adjust that shot
    and so on. When I wanted to repeat any effect settings on a shot, I just cut
    and pasted the relevant keyframes. Mixes across shots can be tricky but you
    can always go back to work with the original shots on their separate layers
    if you need to.
    I ended up with a quick grade that stood up nicely against the one done on
    the Avid and I only had work with 3 layers on my timeline!

  • Arbitrary data param not importing from Premiere Pro project into After Effects.

    Hi,
    I have an AE SDK plugin effect that works in Premiere Pro and After Effects... the effect has a bunch of standard parameters and one Arbitrary Data parameter.
    I believe that the Arbitrary data parameter is implemented correctly, and I have implemented all of the cases for PF_Cmd_ARBITRARY_CALLBACK...
    PF_Arbitrary_NEW_FUNC
    PF_Arbitrary_DISPOSE_FUNC
    PF_Arbitrary_COPY_FUNC
    PF_Arbitrary_FLAT_SIZE_FUNC
    PF_Arbitrary_FLAT_SIZE_FUNC
    PF_Arbitrary_FLATTEN_FUNC
    PF_Arbitrary_UNFLATTEN_FUNC
    PF_Arbitrary_INTERP_FUNC
    PF_Arbitrary_COMPARE_FUNC
    PF_Arbitrary_PRINT_SIZE_FUNC
    PF_Arbitrary_PRINT_FUNC
    PF_Arbitrary_SCAN_FUNC
    The only issue I have found, is that when importing a Premiere Pro project into After Effects with the "Import -> Adobe Premiere Pro Project" option, the value in the Arbitrary Data
    parameter is always the default. There is no problem saving or re-opening projects within AE or PP... and there are no problems with cutting and pasting instances of the effect.
    Importing a Premiere Pro project into After Effects using the Dynamic Link works correctly... the Arbitrary data is imported.
    Thanks.

    Some kind of answer would be awesome... there are Adobe staff members on here right?

  • Importing a Premiere Pro Project file in AE

    Hi,
    I've just finish editing a long feature with Premiere Pro that I've broken down into 10 project files to allow Premiere not to have the memory crash.
    Now I'd like to import in AE the project file to be able to do image stabilization on different shot and sky replacement.
    My questions are:
    a) If I import the project files, can I make modifications in AE (like color correction, stabilization, sky replacement,...) then save the project so that it can still be opened in Premiere
    b) Can I recombined my whole feature into one project in AE or the memory won't handle it as Premiere's memory didn't ?
    Thank you.

    > If I import the project files, can I make modifications in
    > AE (like color correction, stabilization, sky replacement,...)
    > then save the project so that it can still be opened in Premiere
    You can save a Premiere Pro project from After Effects. See
    "Export an After Effects project to Adobe Premiere Pro".
    Note that there are several other ways of moving data between After Effects and Premiere Pro, including copy & paste and Dynamic Link. See
    "Working with Adobe Premiere Pro and After Effects".
    > Can I recombined my whole feature into one project in AE
    > or the memory won't handle it as Premiere's memory didn't ?
    The size of the project doesn't tend to be a problem for After Effects. (Frame size, occasionally; image buffer size, occasionally; but not project size.)

  • Import a Premiere CS3 Project into Premiere Elements 7.

    Is it possible (or NOT) import a Premiere CS3 Project into Premiere Elements 7?
    Thanks a lot for any help.

    It is only possible to open some PrE Projects into the right version of PrPro, but will not work the other way around. The error message that you will get is "This Project was created in Adobe PrPro and you need to open it in that program."
    Even going the PrE to PrPro route is filled with potholes. I can open some PrE 4 Projects in PrPro 2.0, but not all - depends on what was done. Later versions of PrE will not open in PrPro 2.0, but some have opened in CS3 and CS4, though much can keep one from being able to do that.
    Sorry for the bad news,
    Hunt

  • Importing Flash 8 Content into Premiere Pro Project

    We want to incorporate some Flash movies together with some
    NTSC DV footage (720x480 with 0.9 pixel aspect ratio). to create a
    corporate training video. We're using Premiere Pro 2.0 as our
    editor and the file that we want to ultimately produce form our
    Premiere Pro project will be an uncompressed AVI file. The video
    will likely be viewed either on a computer monitor or from a DVD
    player.
    What dimensions should I use when creating the Flash
    document? When I do the export from Flash to an AVI file, what
    dimensions should I specify for the AVI file?
    I thought that I could just create a 720x480 Flash document
    and export it to a 720x480 AVI file for import into Premiere, but
    that doesn't appear to be the case. The playback quality/clarity of
    the Flash portions of the uncompressed AVI file generated by
    Premiere is poor.
    Is it a pixel aspect ratio problem.

    I am attempting the same task with the same results. If
    anyone finds a solutions, I'd like to know too.

  • What is the most efficient way to use Remove Grain from After Effects on large Premiere Pro project?

    I've tried to use Dynamic Linking both ways but it doesn't the effects don't appear no matter how dramatic I make them. Why couldn't there just be Remove Grain in Premiere Pro so I wouldn't have to go through the headache of figuring this out. I've tried importing the Premiere Pro project into After effects where everything comes up and, since there's so many files, it doesn't seam feasibly or convenient at all. Trying Dynamic Link vice versa didn't lend results either. What can I do??? Projects range from about a half hour to an hour and a half. Thank you.

    The situations are well lit; it might be lack of knowledge on the camera settings itself.
    Sort that and your workflow issue dissapears instantly.
    There's nothing more efficient?
    Yep...read above... but ...any Plugin. eg Neat Video... will take long processing time.
    Fixing grain..actually "noise"...is always an image  degrading process as well.  It blurs!

  • Keyframes in Speedgrade with a Premiere Pro project

    I'm using Speedgrade to grade clips in a Premiere Pro project.  I'm trying to adjust a primary layer grade across a clip using different keyframes.  It is not working: when I set up a second keyframe, I try to make adjustments to the offset, gamma, and gain in the second keyframe and, while the sliders slide, I'm not seeing any results in either the clip or the scopes.
    It's working fine when I create a Speedgrade project.  But it's not working with an imported Premiere Pro project.
    I can't find any indication of a bug related to this.  Anyone have any suggestions?

    I've submitted the bug report. 
    Here's a bit more information about my environment:
    MacOS 10.10.1.
    Macbook Pro Retina (mid 2012)
    2.7 GHz Intel Core I7
    16 GM memory
    Intel HD Graphics 4000 1024 MB
    I have some 3rd party plugins installed in Premiere, but none used in the test case.  And in fact I can reproduce the problem with a fresh project by following these steps:
    1. Create a new project in Premiere.
    2. Import a video file.  (The video file is one that I recorded with my Canon 5D mk iii, but the original problem was using files gotten from a GoPro, so that detail doesn't seem to matter.)
    3. Create a new sequence.
    4. Take a 3 second clip from the video file and put it in the sequence.
    5. Take a different 2 second clip from the video file and add it to the sequence.
    6. Use the File/Direct Link to Speedgrade menu option to load the sequence in Speedgrade.
    7. In Speedgrade, select the first clip.  Make changes to the Offset and Gain brightness sliders for that clip.
    8. Select the second clip.  Position the cursor over the first clip and hit "c" to copy the grade changes from the first clip to the second.
    9. Position the read head about midway through the second clip.
    10. Hit the diamond to add a keyframe.
    11. Make changes to the offset and gain brightness sliders at that keyframe.
    12. Hit the keyframe left arrow to move to the initial keyframe in the clip.
    13. Notice that the brightness changes made on the original keyframe show in this keyframe.  This is unexpected behavior.
    14. Attempt to make changes to the offset and gain brightness sliders at this keyframe.  The sliders slide, but there are no changes to the clip itself.  If you bring up the scopes at this point, making changes to the sliders don't change the scope values either.
    Joe

  • Converting AE project into Adobe Premiere Pro project.

    I have found the way to convert AE project into Adobe Premiere Pro project.
    I use the following line of code:
    app.executeCommand(app.findMenuCommandId("Adobe Premiere Pro Project ..."));
    It works. But unfortunately it opens the SaveFileDialog window for the file name to be assigned.
    I'd love not to see this window. I'd love to assign the file name programmatically. It would be great!
    Is there any way to prevent the dialog window from opening?
    Thank you.

    Depends if you are on the cloud or not or the new 12.0 version.  One way to do it is to import your AE footage into PP as pending on your puter....
    Important to tell your version and OS when posting. What seems clear at your end is being asked from someone who has not seen your challenge.

  • Bringing Premiere Pro project into After Effects

    I tried importing Premiere Pro projects to After Effects, but I only got the various files, not the timeline. I just watched a tutorial about Dynamic Link, but when I clicked Adobe Dynamic Link/New After Effects composition in Premiere, I got a layer that was all black, with no sound. I have CS3 Production Premium and Windows XP Media Center SP2.
    Right now, I just want to keep what I edited in Premiere, but I get better quality video if I export it to H.264 MOV in After Effects than anything I've found in Premiere. I can't understand why that's so, but until I find something just as good in Premiere, I want to save everything in After Effects.

    Create a project and a comp. Copy the timeline from Premiere Pro and paste it into the timeline of After Effects.

  • How to transfer an unfinished project from premiere pro 2014 to premiere pro cs6

    Ok I a not too savvy with my new MAC or computers in general but i used to work with Power Director excellent product on my PC. So how do you transfer an unfinished project from Premiere Pro 2014 to Premiere Pro Cs6

    Um ... by basically re-doing the project ... as there's SO much added to CC since the CS6 version, the tools have changed, the available effects have changed, the underlying code has changed ... there's just so much that CC can do that can't be done in the old CS6 version.
    You can try exporting an XML and importing that into CS6 ... sometimes that works better than others, it hath been stated. This is sort of like trying to put a modern engine with all the computer controlled gizmos & pollution controls & fuel injection and designed to work with a 5-speed auto transmission into a 1965 Chevelle. With the older 3-speed manual tranny. How do you do it? Rebuild everything ... both the engine & the car. Lot of work.
    Neil

  • Open a premiere cs4 project with premiere elements 9

    Can I open a premiere cs4 project with premiere elements 9 to edit it.
    Thanks in advance

    I'm going to throw out a somewhat educated guess and say no.  Despite the similar monikers, Premiere Elements and Premiere Pro are two different programs.

  • Premiere Pro Project Manager does NOT include After Effects files.

    Warning: Premiere Pro "Project Manager" does NOT include the After Effects 'dynamic linked composition' files associated with the project when "Collect File and Copy to New Location" resulting in the incomplete and loss of all dynamic linked compositions in the new project destination ( folder or disc drive ) .. I know this also includes Photoshop dynamic links and assume includes Audition audio files as well.

    Here's the best way: Personal Responsibility.
    Put all of your project files in one file. Stop asking PPro to do it for you. It's simple. This is a no-brainer. If you create a linked comp, create it in the same file as your PPro project and files. When you send it to Encore, create the Encore project in the same folder. Works all the time, every time. When you're sure that you're finished with the project for the forseeable future, move the entire folder off your workstation into storage. Do I move a copy of each asset (video clip, image, audio, etc.) into this folder before I import it to my AE or PPro project? Yes I do. Is it overly time-consuming? Not really. I can fly on my machine. Does it beat not being able to open a project later. Oh yes. Yes it does. I'd say I did 50 projects last year this way. When I occasionally had to move a project folder back to the workstation, I had no problems. Everything worked as it did before I off-loaded it. That's because I take personal responsibility for my projects. It's imporatnat that theyt work, especially if I end up having to hand it off to a third party down the road.
    BTW, my workstation is RAID 0. If you are using anything less, you need to upgrade. What I'm trying to tell you is that my system works very well. I have not always done things the right way. I have had my share of frustration. The point is that I learned. Now I'm passing that on to you. I use CS5 on an HP Z800 with a measely 12 gigs of ram and a single i7 quad core and the aforementioned RAID 0 configuration and a hacked Nvidia GTS 450. It works quite well. I'm sure I would do even better with another i7, 12 more gigs of ram and a Quadro 4000, but this is what they give me to use.
    Additionally, I'm using CS5 at home on a MUCH older HP xw8200 dual dual Xeons, 12 gigs of ram and software-only MPE. Guess what? It works quite well.

  • Exporting AE composition as Adobe Premiere Pro Project

    Hi Adobe support team; me again. Do you know what am I supposed to do? Step by step and very simple vocabulary plz... The question? What am I supposed to do to export an After Effects composition as an Adobe Premiere Pro Project. When I export a layer from the composition it works good, but when I try exporting all the composition, it doesn't work at all. There is obviously something wrong; what it is?

    Depends if you are on the cloud or not or the new 12.0 version.  One way to do it is to import your AE footage into PP as pending on your puter....
    Important to tell your version and OS when posting. What seems clear at your end is being asked from someone who has not seen your challenge.

Maybe you are looking for