Importing psd files into AN

I have been using Edge Preview since the beginning. last time I used the app was 4 months ago. Now I see the newer version 1.0 is out. I got quite used to the older previews but it's been 4 months so I need a refresher course. While I do that and re familiarize myself please correct me if I'm wrong but I could have sworn that the older Edge previews allowed you to import .psd files.
Am I right?
R

So is it possible to import .psd files now or not? I have not found the way.
You can export to Edge Fireworks files with an add-on - see here: http://johndunning.com/fireworks/about/EdgeAnimate
It would be great to have the same capability with psd files.

Similar Messages

Error when importing psd files into Premiere Pro

I am using Adobe Premiere Pro CS4 and Photoshop CS4. Whenever I attempt to import a psd file I get this error message: "File format not supported". I have tested it with different file sizes and properties. My files are RGB and 8 bits/channel. Is there any way to resolve this problem? I am also using Adobe After Effects and importing psd files works great with it.
Thanks

Welcome to the forum.
The RGB and 8-bit take care of two possible causes, so thanks for getting those out of the way early on.
Does the PSD file contain Layers? Are any of them mostly Transparent, with just a few pixels, such as a small logo? Those have created issues.
What is the exact version of CS4, that you are running? Seems that there WAS an issue with PSD's in an earlier version, and that a later update fixed that.
There is another element with PSD's, that has caused issues, but my feeble mind is suddenly blank on what that was about. Seems that Colin Brougham commented on it not that long ago. I'll see if I can drege up one of those threads, but you might aslo want to do a Search on "PrPro" and "PSD," though the forum Search might still be broken. Maybe Google, and also look for replies from Colin. I'll do the same too. IIRC, one had to Open the offending PSD in PS, and just do a Save_As with a short file name, and a short Path (not buried deeply inside a sub-folder structure), and all was good, but do not recall any other details at the moment. I would also eliminate any spaces in the new file name, just to eliminate any issue there - use the _ like in the old DOS days, though do not think that one had to adhere to the old 8.3 structure.
Good luck,
Hunt

A frustrating problem I'm having importing PSD files into ID CS3

I am doing some page layouts for ads for magazines, and I've had a frustrating problem with Photoshop and InDesign CS3 for the longest time. Basically, I want to drag the PSD files we have already made for our products into my layout and use them as-is, but when I do so, they display as garbled ugly things in my InDesign CS3 layout, no matter what. The fix is for me to load the PSD, copy the contents, make a new file, paste the contents of the last other file, and save it as a new PSD file -- then things will work great. But this is a big pain in the buttocks and I'd like to fix the problem and eliminate this step.
You can see an example : http://twitpic.com/1kxp33 .
Basically, the image on the left shows the garbled image which has been dragged into the layout. It's just a normal PSD, single layer, but perhaps saved with some incompatibilty such as not being saved in "maximum compatibility mode" or having been saved with a color file attached. The pic on the right shows the correct image that I have manually resaved and imported.
Can anyone help me figure out why all of my PSD files are being garbled when I drag them into InDesign?

I just did a test there and the Maximise Compatibility had minimal effect (ironically) on how the image looks in InDesign CS3 or in InDesign CS5
However, I did get a warning that the image was saved witout Maximise compatibility and it may have an effect on performance, nothing else.
Perhaps the other people are not on the same version of photoshop as you are, perhaps run the adobe updater and make sure you're all on the same version update for both apps.
Trashing preferences might clear up your photoshop images - hold down the three modifier keys bottom left corner of the keyboard when starting photoshop (sorry Peter I don't remember the Mac Combo )
Really hard to know why this is happening though.

Why can I not import PSD files into Adobe?

I downloaded a PSD opener to validate if the files could open and they were able to open successfully. Could it be the PSD file, I'm trying to open was save on a MAC computer, which connect link with Windows....
Please help , small business owner and need to start printing my marketing material.

In the Control Panel under Appearance and Personalization>Folder Options, make sure Hide extensions for known file types is unchecked
Then right click on one of the psd files, choose Properties>General and paste a screenshot of what you see in that dialog.

Importing psd files into FCP

Every time I create a layered file in photoshop with fx like bevel and imboss, gradient overlay, inner glow etc, and import it into FCP, it shows up as a layered file (sequence) but does not show any of the fx (eg. text is plain white when it should be blue, no bevel and emboss just completely flat, no drop shadow, nothing). Can somebody help me? Pleeeeeease!

You need to Rasterize text elements and Layer Effects such as Bevel, Emboss and Shadows in Photoshop, before you import them to FCP.

Importing Photoshop files into premiere pro CS6 issues

Hi
I recently re-installed Premiere Pro CS6 on my work computer (i changed from a HDD to an SSD). Ever since I did this I am having an issue importing .PSD files into Premiere.
I try and import a photoshop file. The importer window comes up. The progress bar starts to move, then pauses and the Importer says 'Not Responding'. After a few seconds it comes back and throws up the following error:
Error message - 'The importer reported a generic error'
All projects i previously worked on that had .PSD files in them are now reporting these files as 'Media Offline' meaning I have to replace them with .PNG files which is really annoying.
Any ideas what might be happening? The files I am trying to import are RGB .PSD's. They worked previously without any issues.
I have Premiere Pro Version 6.0.5 (001 (MC: 264587))
running on a Windows 7 machine with Service Pack 1, 64 bit OS, 16GB Ram and Intel Core i7-2600
Many thanks in advance for anyone who can help me with this!

Yes, MXF should play perfectly in PP CS6, but if you can't work this out at this point, you may wrap your MXF video to something intermediate. as a matter of face, Adobe Premiere Pro CS6 seems to work fine if you import your MXF clips directly from a camera or camcorder, but if have already copied MXF recordings your HDD or you downloaded them from somewhere else, the import error may occur.
So i suggest you convert the MXF footage to something mezzanine we would recommend DNxHD.mov (if you are on a PC) or Apple ProRes .mov (if on a mac). those two intermediate codecs are good mezzanine codecs that handle recompression well and standup well in other areas of post-production (color grading, graphics, compositing, etc,). You can see what I wrote about the solution. "Why Premiere Pro CS6 can't import MXF files?" i hope that it is helpful to you.

How to convert a .psd file into .ai (adobe illustrator)

Hi Guys,
I have a very high quality multi layer .psd file that I need to convert to adobe illustrator in order to export them into autocad.
As I'm very in exprienced, Ive tried to merge the layers in the psd file and then use Export -> 'Path to Illustrator', however when I open the newly created .ai file, it open a dialog box called 'Convert to Artboards' and whatever option i choose (either Legacy Artboard or Crop Area(s)' my new illustrator file seems to be empty.
I appreciate any file anyone can offfer.
Best Regards
Alex.

Importing PSD files into Illustrator
   •   Opening PSD files into Illustrator
1. Turn on your computer and launch the Illustrator program.
2. Open a new document by clicking File>New in Illustrator’s menu bar.
3. To open your Photoshop document, go to File>Open and then select the document you want to open when prompted.
   •   Placing PSD files into Illustrator (Editable)
This method is ideal if you wish to incorporate a Photoshop document within an existing Illustrator document which can then make the PSD file editable within Illustrator.
1. Launch the Illustrator program, select File>Place
2. Locate the PSD file you want to import and click “Place”. Make sure the “Link” option is not selected.
Placing or opening an unlinked Photoshop file will prompt a dialog box with options, choose the most appropriate option and then click “OK”.
• Convert Layers to Objects: This option will convert the Photoshop layers into Illustrator objects to be able preserve masks, transparency and blending modes.
                             • Flatten Layers to a Single Object: This option will flatten all the Photoshop layers into a single layer to preserve the look and appearance of the image; however individual Photoshop layers will no longer be editable.
   •   Placing PSD files into Illustrator (Not Editable)
This method is ideal for incorporating your Photoshop files in an existing Illustrator document. Although the PSD file will no longer be editable it will be able to maintain a link to your original Photoshop file.
1. Launch the Illustrator program, select File>Place.
2. Locate the PSD file you want to import and click Place. Make sure the Link option is selected.
- See more at: http://www.hiddenwebgenius.com/blog/design/how-to-import-psd-files-into-adobe-illustrator- and-indesign/#sthash.u19RHWSB.dpuf
**The one time it did not work for me and appeared black was because of shadows (hue/saturation adjustment layer). So I compared the old .psd file, that converted fine, to the current one I was trying got send. One of the differences was the introduction of shadows by duplicating the fonts and image shapes, then merging them to a single image with hue/saturation adjustments. When adjusting the hue/saturation, it appears in a separate layer that was locked to next to image that was just produced. Some reason that was the bug that kept Illustrator from placing the .psd file in Illustrator. The solution was to merge the hue/saturation layer with the image layer. Now it’s back to normal.
Hope this save you some time.

Importing PSD files create a black line to the right of some images

I am importing PSD files into Framemaker 11 and they keep giving me a vertical line on the right side of some images. I already know that other image file formats don't cause this, but I prefer the practicality of PSD files and not having to deal with duplicate files of the same image. I figured that native Adobe files that are supposed to be cross platform compatible should work without any issues. I get lines when converting to PDF documents and when I print them out also. I’m getting ready to publish our catalog and would like to prevent the printer from cleaning them up again. Does anyone know how to fix it or if Adobe is currently addressing this issue ? Who can I contact to let them know about the issue, since it has been around from the time Frame started accepting PSD files?
Thanks,
Tomas

Hi ais007,
This is gonna sound really crazy, but this happened to me a couple of years ago. Below is the answer....hope it helps for you!
Found the answer to this in the framers digest mailout (framers Digest, Vol 71, Issue 9). Hopefully it wll help you too.
I am not sure about the Illustrator files, but for Photoshop, resize your images so that the last number is an even number. (example: change 3.25 to 3.24)
This worked for me! I couldn't believe it!
If you don't receive these emails, below is the link to subscribe...they are really helpful. I hope that is the correct link, it has been a while since I signed up.
http://lists.frameusers.com/mailman/listinfo/framers
http://forums.adobe.com/message/3945090#3945090

A problem with importing layered PSD file into Flash

Hi.
There's a problem with importing layered PSD file into Flash.
If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
If the higher layer has brush or transparent effects, it becomes worse.
Any help with this problem?
Thanks.

How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

Can't import any .psd files into after effects.

Hello all.
I was using CS5 master collection without issue, for a year.
Decided to upgrade to the CS6 master collection and that’s when the problems began.
For example, I can’t import any .psd files into AE.
All files are saved in RGB mode.
The previous files were made on CS5.
I made a new .psd file in CS6 with just a couple of layers on it, couldn’t import that either.
I’ve tried Ctrl-alt-shift to delete preferences, that had limited success. I can import a file and do a little bit of work on it but as soon as I close the file down and opened it up again, it does not recognise the .psd file.
The errors I’m getting in AE are many
For example:
After Effects warning: Reading past end of file
After Effects error: Could not open intro.psd because it is not a valid Photoshop document
After Effects error: Crash in progress. Last logged message:<8104><dynamiclink><5>C:\ProgramFiles\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro exe
After Effects error: Not enough memory to initialise PSL
I have un-installed and re-installed many times.
I’m using Windows 8, with 32ram. Hard drives C: 100mg, D: 2 Tb
I’ve tried installing on both drives, still the same thing happens.
Does anyone out there in Adobe Land have any ideas?
Totally confused
Cheers,
Gary.

Hi Arie,
Thanks for your response.
It actually happens with every .psd file regardless of size or specs.
All the other programs in the CS6 master collection work fine, except for AE and PS.
I tried the small file. Created a small file, 100 px by 100px 72dpi, just with a gradient background. Same thing, not enough memory to initialise PSL.
I got the adobe cleaner, and re-installed on my system (again) .... same thing.
As long as I open AE with doing ctrl-alt-shift every single time or export layers from PS individually I seem to be OK.
The problem is far from solved, so I guess i just have to put up with workarounds.
Thanks for taking the time to respond

Importing Photoshop Elements 6.0 .psd files into iPhoto

Hey everyone. I am trying to import a bunch of .psd files into iPhoto to keep them organized. Some import just fine, for others though, the thumbnail gets all screwed up. It's almost like there are shapes clipped out of the real .psd file. When I open the file in PSE everything looks fine. It's just the thumbnail in iPhoto that is all messed up. Does anyone know how I can fix this? Thanks for your time.

This is what I found in the PSE 6 Help file:
"Masks, which let you manipulate, isolate, and protect specific parts of an image. In Photoshop Elements, alpha channels are called saved selections. To save an alpha channel, choose Select > Save Selection. To load an alpha channel, choose Select > Load Selection."
Go to the Select menu in PSE6 and select the last option, Delete selection. It should be useable. That will let the image be fully displayed in iPhoto. You can set PSE6 as the editor of choice in iPhoto as described below:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
OT

How do I import a PSD file into AI?

How do I import a PSD file into AI?

Place the PSD (File menu) if you are bringing it into an existing AI document, or simply choose to Open it if you are going to use the document size from the PSD file and simply add to it.
Take care, Mike

Import error when importing .psd file created in Photoshop CS3

I have a file that was created in Photoshop CS3. I am trying to import this file into Catalyst CS5, but I keep getting an input error. I created a file in Photoshop CS5 and I was able to import this .psd file successfully into catalyst. So I guess my question is this; Does Catalyst support .psd files created in Photoshop CS5 only? If this is the case, how can I convert the CS3 .psd to a CS5 .psd

I am now building my files using photoshop CS5. A few challenges I have experienced while trying to import into Catalyst:
- If I do a straight import into Catalyst, I loose all my colors in Catalyst. That is, catalyst imports all my vectors without any of the colors I had in Photoshop. My understanding is that Catalyst has libraries to support Photoshop files, so your import from Photoshop should not look any different in Catalyst.
Work Around: I have had to rasterize / merged all my image layers for the different components I have built in Photoshop CS5. Then when I start the import process I click the Advanced button on the catalyst import dialog. From the advanced dialog, I have to flatten (to bitmap) all the images I intend to import.
This process takes about two hours because I have a lot of components on the page.
Is there something I'm not doing right here? I'm not seeing the value add to Catalyst, if it's taking me this long to just import .psd files

Layers of imported .psd files are cropped?

Hi, when importing .psd files the images on layers are cropped...?
In Photoshop an image on a layer is moved across the visible portion of the document as if it is animated, through the use of comp layers (each new comp layer the image is move a little bit). However after importing the .psd into After Effects only a portion of the image is visible...it is impossible to recreate the animation roughed out with Photoshop comps because some of the image on the layer being moved is cropped.
I hope that makes sense...how can .psd files be imported into After Effects without cropping? Thanks

Thanks so much for such a prompt reply...the single .psd file with many layers is imported using:
Import Kind: Composition
Layer Options: Editable Layer Styles; Life Photoshop 3D (although there are no 3D layers in the .psd...so I'm unsure if this default is needed?)
Oh!! Never mind...I just tried Import Kind: Composition -- Cropped Layers and the layers were not cropped...kind of counter-intuitive since I would have thought "Cropped Layers" would crop the layers rather than the other way around.
Thanks for your help...if you just reply to this post I'll mark your reply as the answer, thanks for suggesting the direction to look for a solution, cheers!

Imported PSD files "jumping" on screen when project is exported

I created some graphics in Photoshop CS3 (version 10.0) and imported them as PSD files into my Premiere project (Premiere CS3 version 3.0.0 (374). These are simple photos with text overlays. I am importing the PSDs into Premiere as footage with merged layers.
When I render the video and watch it in Premiere, these graphics look fine. But when I export the project, the graphics "flicker"...appear to be slightly jumping up and down on screen. I have tried exporting as MPEG2 and as .wmv with the same results. I also tried replacing one of the PSDs with a JPEG but got the same result.
I tried using the anti-flicker settings in Premiere and that helps, but there is still flickering at the top of the screen and the anti-flicker settings also degrade image quality. Is there a better way to create a text-over-photo graphic with stroke and drop shadow other than doing it in Photoshop before importing to Premiere?
I am running Windows XP Professional on a Dell Optiplex 755.
I would greatly appreciate your help in resolving this issue.

Heather,
Ruud's links will probably answer most of your questions - great links BTW.
However, back in Photoshop, when you chose File>New (or Ctrl-n), you are presented with a dialog box, called "untitled... " Look slightly to the left and above the center and you'll see a drop-down. Most likely it'll say "Clipboard," or "Custom." Twirl it down and near the bottom you'll see NTSC presets and PAL presets. Choose the correct one for your Project. Basically 4:3 PAR 0.9 or 16:9 PAR 1.6. I use the preset with "Guides" so I have the Title Safe Area and the Motion Safe Area shown with Guides. Load up any background image that you might want, and size (Ctrl-t works great for this), and then create your Title with the Text Tool.
I Save_As to the required folder as .PSD and leave the Maximize Compatibility checked. Import this/these into PP. Unless you plan on doing some animation with the Layers, I just let PP Flatten the PSD.
Hope this helps,
Hunt

Importing psd files into AN

Similar Messages

Maybe you are looking for