Importing Quark into Indesign cs3

I am importing a quark 4.1 file into indesign cs3 and it seems all the text frames I had tabs formated on didn't translate into indesign cs3 well. Specifically the last couple tabs were off making the text jump to the next line and moving other text over. Is there anything I could do to fix this isssue? I tried to export the text from quark to a word doc and then I tried to import that word doc into indesign and it still was messed up. Any suggestions?

My guess is that the tab settings are exactly the same as you had them
in Quark, but that the text is wrapping a little differently. Figure out
what's making the text a little bit longer in Indesign and fix that.
Conversions from Quark, or Pagemaker, or even from previous versions of
Indesign always involve some fixing up. For me, it's not worth
converting from Quark unless the document is being completely reworked.
Otherwise, I just leave it in Quark.
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Similar Messages

Importing fonts into InDesign CS3

I have an Macbook with OS10.4.11 and I'm using InDesign CS3. My question is, how do install fonts in my ID that were sent to me from someone else with ID (version not known). I tried installing the fonts in ID's Fonts folder as the help recommends, but they're still listed as missing when I open the file.
Since I'm a newbie, I'll mention that the fonts came in a separate folder, along with an Images folder, the .indd file, and an Instructions.txt file. I believe this means it was "packaged" using ID's File--Package command? Might this make a difference?
Thanks for the help!

Try installing the fonts into your system using Font Book. Double-click on the font files to open them then click on Install Font in each open preview window.

Import Quark 6 files into InDesign CS3?

I'm looking to import my old QuarkExpress 6 files into Indesign CS3. I saw that there is a plug in for about $199 that would allow Indesign to import these files. Is that the only way, or is there a cheaper way to make this happen?
Thanks for any input.

This is not a design question. Please ask in the ID forum.

Importing interaction into InDesign

I understand that the Captivate 7 interaction must first be put into Edge Animate and saved as OAM file before importing it into InDesign, but I don't know how to import a Captivate interaction into Edge Animate. If anyone knows steps for how to do this I'd greatly appreciate it.

I don't think that's true. I don't know if you can save the interaction by itself but you certainly can save the Captivate file after you get it working and import it into InDesign.
Can you tell us exactly what you're trying to do? In the meantime, check out this blog post from Pooja...it's excellent:
http://blogs.adobe.com/captivate/2013/08/a-step-by-step-guide-to-create-an-interactive-ebo ok.html
Dave

Import CSS into InDesign?

My company wants to move about 200 books that are about 250-500 pages into InDesign. They are currently stored in a database in XML format and we use CSS and PrinceXml to publish. I am able to import the XML into InDesign, but I haven't found a way to import the CSS styles. Is that possible?

As far as I know, there is no ability to import CSS into InDesign. When you export as EPUB, you have the option of using a CSS stylesheet to format the EPUB file.
It's been explained to me that there are too many differences between the way InDesign creates styles from the way CSS works to do such a thing. For example, in CSS you can define placement on the HTML or XHTML page in a way that's not possible in InDesign.

Placed QuarkXpress 7 eps into InDesign CS3 prints with slanted type

any suggestions to fix?

placed QuarkXpress 7 eps into InDesign CS3 prints with slanted type
The problem may be in the HP print drivers.
Printing to Epson printers works, printing to HP 132, 5000 or 2200 produces slanted type, even at Adobe.
Printing to disk as a Postscript printer and then printing the ps file using the pdf printer works fine.
Roger

How to import an Quarkxpress 5 file into Indesign CS3

Hello,
I am in trouble when trying to open with Indesign CS3 for windows a file created with Quarkxpress 5 for Mac. Do you have any hint? (file attached)
thanks for support

The Q2ID plugin is really nice as Bob suggested. If you go through there website they will convert your one document and post it for you to download, email you with the results and a discount code. Well worth the money and a very nice company to work with. I can't say enough nice things about their products.
If you have a newer version of Quark licensed I prefer use their Markztools plugin for Quark to backsave to 4. Seems to be a better conversion with InDesign's Quark import, though that could just be my impression.

Importing and flowing multiple text docs into InDesign CS3

I have multiple plain text files where each runs several pages long that I want to import into one document in ID CS3. I want to import them and have them flow in a single threaded text frame one after another over multiple pages. With a single multi-page text doc all I have to do is select Place and hold down the shift key and InDesign will add the necessary pages and flow the copy until the end of the doc. However, if I shift select the docs and try import them into a text frame by holding down the shift key, it will just flow the first doc in the group with no indication of overset text. I have tried placing multiple text docs holding down the shift and command key and that brings in all my docs on the first page but in separate text boxes with overset text for each doc. Is there a way to do this in InDesign or perhaps a plugin that can do this?
Thanks
Randy

I tried to find this. It was posted 4/21/08 by Peter Kahrel (I can tell, because I can see my side of the discussion in my Sent folder) in response to a post I made entitled "Multiple Files". Maybe I'm not searching the forum archives properly, or maybe this was during the time last year when Adobe was trying (and failing) to update the forums. In any case, I'm sure at this point that Peter posted this for public consumption, so I don't think he's going to mind if I post it again:
// Description: Place multiple textfiles as one story
#target indesign
preset = "/d/books/test/*.doc";
app.wordRTFImportPreferences.useTypographersQuotes = false;
app.wordRTFImportPreferences.convertPageBreaks = ConvertPageBreaks.none;
app.wordRTFImportPreferences.importEndnotes = true;
app.wordRTFImportPreferences.importFootnotes = true;
app.wordRTFImportPreferences.importIndex = true;
app.wordRTFImportPreferences.importTOC = false;
app.wordRTFImportPreferences.importUnusedStyles = false;
mask = prompt( 'Enter a file path/mask.\r\r' +
   'Examples:\r' +
   'd:\\books\\test\\*.rtf   /d/books/test/*.rtf', preset );
if( mask == null ) exit(); // Cancel pressed
ff = Folder( File(mask).path ).getFiles( File(mask).name );
if( ff.length > 0 )
   placed = [];
   missed = [];
   tframe = app.documents.add().textFrames.add(
      { geometricBounds : [36, 36, 400, 400] } );
   placedstory = tframe.parentStory;
   app.scriptPreferences.userInteractionLevel =
      UserInteractionLevels.neverInteract;
   pb = initprogressbar( ff.length, 'Loading');
   for( i = 0; i < ff.length; i++ )
      pb.value = i;
      try
         placedstory.insertionPoints[-1].contents = '£0';
         placedstory.insertionPoints[-1].place( ff[i] );
         placedstory.insertionPoints[-1].contents = '\r\r';
         placed.push( ff[i].name );
      catch(_)
         missed.push( ff[i].name );
   app.scriptPreferences.userInteractionLevel =
      UserInteractionLevels.interactWithAll;
   inform = '';
   if( placed.length > 0 )
      inform = 'Placed ' + ff.length + ' files (in this order):\r\r' + placed.join('\r');
   if( missed.length > 0 )
      inform += '\r\rCould not place:\r\r' + missed.join('\r');
   delete_empty_frames ();
   alert( inform );
else
   alert( mask + ' not found.' );
// End
function delete_empty_frames ()
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = '\\A\\Z';
   var empties = app.activeDocument.findGrep (true);
   for (var i = 0; i < empties.length; i++)
      empties[i].parentTextFrames[0].remove()
function initprogressbar( stop, title)
   var progresswindow = new Window('palette', title);
   var progressbar = progresswindow.add( 'progressbar', undefined, 1, stop );
   progressbar.preferredSize = [200,20];
   progresswindow.show()
   return progressbar;
Copy and paste everything between the hyphen lines (not including the hyphen lines) into a text editor and save with a .js extension and put it in your scripts folder. Should be something like:
D:\Program Files\Adobe\InDesign CS3\Adobe InDesign CS3\Scripts\Scripts Panel
After alphabetizing your files and putting them in their own folder, copy the path and run the script. It will make a new folder and place all your files in one continuous story. I don't know how it will work with .txt files.
Ken Benson

CS3 Layers disappear when importing map into InDesign

I have an Illustraor .ai file of a map with many layers and when I import it into my InDesign document
some of the layers disappear. When I open the map in Illustrator they are all turned on but in InDesign some seem as they are turned off or transparent. Very frustrating...any help is appreciated!

Thanks so much for your responses. Although I don't complete understand what the issue was becasue I am no Illustrator expert I did find a solution. I found that there were multiple layers within a layer and also many of those layers had paths/compound paths. So I pulled the layers within out and made new separate layers for them all and removed unnecessary compound paths. So now I have many layers instead of a couple layers with multiple layers within. Confusing I know...but it worked!
Thanks again for your input.

Importing Word into InDesign, problem with styles

OS 10.6, CS5
Hi everyone,
Does anyone have any experience with importing styled Word docs into InDesign?
Editors style their Word documents with some basic styles (Text, References, Headline, etc.) using a Word template that I created. Designers use import options to match the Word styles to the ID styles. This worked fine in Word 2004 and InDesign CS3: Word "text" style would map on import to the InDesign "text" style, even though they had totally different attributes. Superscripts, italics, etc. would be respected as local overrides in InDesign.
Then we upgraded to CS5. Automatic mapping on import no longer seems to work: After importing text, all the styles in InDesign have local overrides assigned to them that don't make sense (hyphenation exceptions, tab settings). So I'm left with importing the Word styles, using auto-renaming so that InDesign explicitly does NOT match styles.
Then delete the Word styles one by one from the paragraph style panel, replacing with the desired ID style.
This has gone on for several months and we've now upgraded to Office 2011 but that hasn't solved the problem.
With Word 2011 docx files, the import works almost like it did in CS3, the styles almost come in cleanly: If the style in Word has NO local overrides, such as italics or superscripts, the InDesign style is correctly applied. The problem is those local overrides in Word--InDesign not only respects the italic or superscript, it also respects the font attribute. All the Word styles are Times New Roman so all superscripts in InDesign are coming in as superscript + TNR. (see screenshot)
Are we left with our original work-around? Importing styles then manually deleting and replacing them?
This is frustrating because it used to be smooth and seamless and while some new features of CS5 are great, it's annoying that it's broken this fundamental function!
I've tried saving the Word files as doc or rtf instead of docx but this doesn't make a difference in this problem.
Any help or advice would be much appreciated.

I'm an author / publisher. I write in Word and I publish with InDesign. When I'm in the review stages, I like to edit my text in Word, so I export the text as an RTF. When I import it back into InDeisgn I often find that some of the styles have annoying overrides from Word that break things. (1) Paragraph style stuff about hyphenation and (2) Characters style stuff about Character direction: Left-to-Right style.
* Easy global fix: select the whole text open the Window | Style | Paragraph window, and click the button on the bottom to remove all overrides. And do the same for the Window | Style | Character window. Before doing this, I like to check that I don’t have any italics that are in the file as overrides rather than being in there as part of a header style or as part of the Emphasis style that I try to use throughout the text instead of just an italic override. It makes me uneasy to remove all overrides, as I always worry there might be an important one I could have kept.
* (1) Specific fix for the hyphenation overrides: Make sure the hyphenation settings in the individual InDesign paragraph styles match, so far as possible, the Word global hyphenation settings in the Page Layout | Hyphenation dialog of Word. InDesign will import any Word hyphenation settings that don’t match the InDesign doc styles as overrides.
Specifically, set InDesign Hyphen Limit to ( say) 1 and set Word | Hyphenation | Hyphenation Options | Limit consecutive hyphens to the same number (say) 1. Also set InDesign Paragraph Style Hyphenation | Hyphenation Zone to (say) 0.5” and set Word | Hyphenation | Hyphenation Options | Hyphenation Zone to the same number (say) 0.5”. And turn off all the InDesign optional hyphenation check boxes at the bottom of the dialog, and the turn off the two check boxes in the Word Hyphenation Options box as well.In Word you should also set Hyphenation | Automatic. If you cautiously set Word Hyphenation | None the import will throw a “Hyphenation” override on the hyphenated paragraph styles, even though this maikes no sense.
You may still pick up some hyphenation related overrides on your heder styles, if you have set the headers not to hyphenate. You can either dump the overrides in InDesign or you can set your header styles to hyphenate…and be careful not have any headers actually be longer than one line.
(2) I still haven't found the fix for the Left-to-Right text override.

Cannot load QXD file into Indesign CS3

Hi,
I'm trying to open up a Quark QXD file in Indesign CS3. It find finds the file as a readable file, but when trying to open I get the error message that it cannot open the file - Adobe Indesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application.
Adobe support lists this as an importable file, and tells me where the plug-in is stored - I've checked and do have it (I can find it in C:\Program Files\Adobe\Adobe InDesign CS3\Plug-Ins\Filters\Sangam Readers) Reader for QuarkXpress.smrd. The QXD file is not in use anywhere else.
Is it possible to check if this plug-in is actually loaded and if it's not, how do I install it? Has anybody else had this problem?
Any help gratefully received!!!

InDesign cannot directly open Quark files later than version 4 due to encryption. If your files are from a later version you can use the Q2ID plugin from Markzware.
Peter

Issues importing word into indesign and keeping notes/superscripts

Hi
I have a job coming up where I will need to import word documents into indesign that come from various sources.
I did some web surfing and discovered I should be able to do it by placing the word document into my template. It seemed to work when I first tried it, but I have now discovered that only the first few notes have from through (first 14 to be precise). Then the numbers disappear (and are replaced by soft returns) until note 33 where they jump back in. But of course this starts at the next number missing, so in this case 15. Which of course means all the numbers are out of order and so need to be fixed.
I would just input or fix manually but as I have 15 stories place and format and the first one has 95 notes... I am hoping to find a less time consuming solution.
I am guessing it is something in how the author has edited the word document, but I truly have no idea.
Any suggestions as best way to overcome this? Ideally something I can ask the authors to fix. Or is there something in the import options?
I am about to get EXTREMELY desperate with this issue.
Thanking you call in advance.
Cheers
Nikola

OK after some more web seraching I have tried saving as and RFT file and that seemed to work. So fingers crossed.
Using these settings:
If anyone knows why it happened please let me know as it would be most useful.
Thanks
N

Importing excel into indesign

Hi,
I'm using indesign CS4 version.
How to import excel file into Indesign.
Regards
GaneshR

You can place it like you place a Word document.

Quark to InDesign CS3 Question

I have a Quark 6.5 file for Mac and need to be able to open in InDesign CS3 (PC). I do not have the plug-in and have no need to purchase it as this is the only file I have. Would it work to save the Quark file down to version 4 and then open in InDesign that way?
Any suggestions?
Thanks!

Yes it would, except that Quark 6 will save down only to Quark 5. So you
would need to then open it in Quark 5 and save down to Quark 4.
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Doesn't start an importing swf into indesign

HI to every one
Sorry for my english, I hope to be claer
I am using Indesign cs5 but i have a problem when I import a swf file into indesign.
Practically I import a Swf file made by Flash cs 5 into Indesign, and I export this file in swf by Indesign.
So when i open this file I see an icont but not the animation, to make starting the animation i have to click on this icon.....why???
I ask you, can't animation start automatically at the open of document??
Thank you to all
bye

After you have placed your SWF, select it with selection tool (black arrow), open Window>Interactive>Media panel and check Play on page load.

Importing Quark into Indesign cs3

Similar Messages

Maybe you are looking for