Importing quick time files to iMovie08-- problems
for some reason i can only import a few of my quicktime clips into iMovie 08 on my 17 inch MACBOOKPRO-- also my MACBOOK cannot read some earlier iMovie folders on myinternal and external drives.... any ideas, or solutions would be greatly appreciated
Stephen
QuickTime comes in many shapes and sizes and not all work with FCE.
Files from a DVD are multiplexed.
They will need to be de-multiplexed before FCE can use them.
Search this forum for demuxing.
Al
Similar Messages
-
Importing Quick Time file to FCE problem
I tried to import a quick time movie I had saved on a DVD from work and it would not import into FCE. It says "unknown file". But other quick time movies that are on my Mac import fine into FCE. Both my work Mac and home are almost identical-Power Mac g5. Why is this happening?
Stephen
QuickTime comes in many shapes and sizes and not all work with FCE.
Files from a DVD are multiplexed.
They will need to be de-multiplexed before FCE can use them.
Search this forum for demuxing.
Al -
FCP wont import Quick Time anymore
I´m using FCP HD 4.5 everything was fine until I tried to import Quick Time files previously exported from FCP. I always imported Quick Time and never had this problem. Any help will be apreciated.
Thanks.the important thing to understand is .mov doesn't tell you much about the file. It's just a wrapper. Open it up in Quicktime Player and go to Window>Show Movie Inspector (or show movie info).
This will tell you the format of the video. Odds are it's a format that FCP 4.5 doesn't support and you'll need to convert it to compatible editing format.
~D -
How do you import a Widescreen Quick Time File captured by Final Cut Pro?
Hi
Here's my workflow: I captured HD 1440X1080 footage in Final Cut Pro. FCP creates a folder of Quick Time Files in a Scratch Folder. A month ago, I had no problem importing the Quick Time files into IMOVIE HD 6 and preserving the widescreen format.
Now, for some reason, when I import the same files into IMOVIE HD, it is squashing the image (stretching it vertically) and leaving a gray bar on the left side of the screen.
Can IMOVIE HD import Widescreen QT files created by FCP? If so, how?
All help appreciated.
PhiliDVD does everything automatically for you. With DVDSP and Compressor, all steps must be done correctly. The trade off is that you achieve better quality using Compressor over iDVD.
1. First thing to do is export your sequence as an uncompressed interlaced 25i 720 x 576 16x9 Anamorphic QT.
2. Determine your optimal bitrate by using a bitrate calculator. Here's a good one. Remember you need to account for all video on the disc, including motion menus.
http://www.videohelp.com/calc.htm
3. Bring your down converted QT into Compressor and use the manual settings set your bitrate. Also encode out a Dolby digital AC3 file. These files take up less bandwidth than uncompressed audio. Also remember to match your upper fiiled dominate filed order as well in Compressor. This must be consistent throughout the export and encoding stages.
4. bring your encoded video and audio files into DVDSP and author -
Importing a Quick Time file into FCP 5.14 file is not recocnized
Hi, I purchased a stock footage in quick time format from istockphoto. Importing it it gave me an error that the file was unrecognized. It plays OK on me desktop using Quick Time. I exported as quick time file, using DV NTSC... no luck.
Than I exported as AVI with DVD NTSC compression, and it solved the problem.
Why FCP reads AVI (Windows format) but doesn't read his own... I am puzled!
If anyone knows the answer, I will appreciate.
thanks,
Message was edited by: Girshon RutsteinFirst of all thank you all you guys for your help! Secondly Apple webmasters should fix the problem with solve and helpful buttons. It gives an error.
iMovie has no problem to read this file.
Yes Final Cut Pro is a sensitive tool. This is not the first time I am running into this kind of issues. Last week I created a particle Illusion effect as HD mov file
Importing into FCP it showed me only 1/4 of the screen. I fixed this by creating the AVI file. The conclusion is (I am maybe wrong) that Apple should work on the quick time issues.
Thanks again!
Message was edited by: Girshon Rutstein -
my speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)
Thanks for your solution, it wasn't quite what solved the problem but i remembered that i had a bit of salt water on my phone recently and spraying the charging port with an anti-oxide spray solved my problem, do you mind if i ask, how is the charging port related with the volume or/and speakers?
-
DVD Studio will not encode my quick time files!!
Okay, so I know that I can run my files through compressor and make MPEG2's to burn in DVD Studio Pro. But it is just an extra step for what I do because usually we need a quick time file also to post to our website. When I drop any .mov file into DVD Studio it gives me an error while encoding... What can I do? are my codecs wrong? HELP!!!
Okay, the dimensions on one of my files is 720x480.
the codec i am using is DV/DVCpro - NTSC, Integer
(big endian), timecode.
The frame rate is most likely 29.97 or whatever
digital video is. It is not 24fps.
Well, your frame size is OK. Check the frame rate to make absolutely sure it's 29.97 (since you said it's not 24 fps) and not something slightly different.
Having your disc project set to PAL instead of NTSC shouldn't cause the error, even if you bring in NTSC assets. At least, it didn't cause errors on DVDSP 4 when I tried it just now. -
Photoshop doesn't open quick time files
anyone who has any idea why ps cs 5 doesn't open quick tim files , please tell me.
thank youPS doesn't deal with compressed files that well. Try to convert it in an external tool like Quicktime Pro or one of the gigazillion free video converters based on ffmpeg....
Mylenium -
I have a quick time file movie which I was able to open on quick time but now it does not want to open. what can i do? thnaks
Now that i can view the mpg file on my imac using VLC player, how do I save the disc to my desktop?
I need to then cut and save 15 sec visual bytes to my desktop (in a common video file format so that I can enter them into some editing software.
All assistance appreciated
thanks,
Peter -
Does anyone know why my Quick time file just disappeared off my iweb page. When I click on the quick time file the amount of time of file shows but no video media? This happened a couple of weeks ago but I inserted a second file and it worked. Now even my desktop file will not play, however all other quick time files do play?
It's possible the desktop file is corrupted. Try a simple restart and/or repair permissions & then restart your computer.
!http://i45.tinypic.com/jl0z95.jpg! -
Turning a quick time file into a downloadable fild
I recently created an audio book as an mp3 file using iTunes and audiobook builder. Love the final result but the large size of 63 MB makes it not practical to post (takes a ton of time) and then to have users download.
iWeb returned a suggestion of exporting the file in quick time which I did. I now have two files: one for dial up connection (8.5 MB) and low broadband (20 MB)
The problem is that when I go to the web pages where these files live, I am given the choice of playing them in real time as opposed to downloading the files.
Any suggestions on how I can post as downloadable files in mp3 format?You have probably not optimized your .mp3 file and an export to other formats could drastically reduce the file size.
Remove "stereo" from your file and you cut the file size in half.
Reduce the bit rate from 128 (standard) to 64 and you cut the files size again by 50%.
Use the AAC audio codec (.m4a) instead of the ancient .mp3 file format.
You can use iTunes / Advanced menu to reduce the file size and a text based link to its URL which your visitors can then right click to download. -
Copying quick time files to dvd
Question..
I converted a DVD home movie (no copyright protection) to a quick time movie....I want to save that quick time movie to a DVD so I can send it to a friend, so he can import into FCE...I tried to accomplish this in iDVD, but it showed a VOB file, even though I dragged the quicktime file over to iDVD...maybe i should "write" it to a DVD? Thoughts?
Thanks for your help!
CurtI'll give it a shot and let you know...Thanks very much, and no need to worry, just a home movie project I'm working on with a buddy..no bootlegging!
Curt -
Quick Time export to iMovie problem...
I'm trying to import a video from Quick Time, but it keeps telling me my iMovie hasn't been set up yet. Can anybody help?
david,
did you ever find a solution? i have the same problem....
thanks,
marc -
Can't install Quick Time 7 - Error 1721 problems with windows installer
I had QT 6 PRO and an old version of itunes working fine. I tried to upgrade to Itunes 6. The install failed at the last step of installing QuickTime 7.04.
The error message was "Error 1721.There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." So, no QT, therefore no Itunes.
I did the following:
cleared my temp directory.
made sure I had the latest windows installer (3.1 v2)
removed all traces of itunes and quick time, using Remove Programs, the windows cleanup Utility and manually deleting all files as listed in info article 93976.
I downloaded the standalone QuckTime 7.04 installer, tired to install and I still get the same error.
I now have no quick time 6 or 7 and no itunes, and I have no idea what is wrong with the installer.
I do have access to the install log, and am delighted to reprint it if it will help.
thanks for any help people can provide.
Windows 2000
Windows 2000
Windows 2000HI I am somewhat having the same problem as you with the itunes and QT not fully downloading but i am not computer smart and I am not real sure what you are saying to do. Also it always says "plug-in did not initialize properly" No clue but would appreciate any help from you... Thanks alot
-
Importing quick time slide shows to dreamweaver site
I can't seem to import a mac osx quick time slide show to my
web site. Anyone know how to do this?There is a part of the website here referred to as the
Exchange:
http://www.adobe.com/cfusion/exchange/?ogn=EN_US-gntray_comm_exchange_home
It is under the Community drop-down up at the top of this
site. This is a resource that allows you to find and download
plugins for all of the Adobe programs. If you go to that link, then
on the right click on Advanced Search. Then search for "quicktime"
for the exchange "Dreamweaver". Just searching now, the second one
is what you need:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=16025
Just download the file and double-click on the file that you
save to your computer. The Adobe Extension Manager will launch and
should install it automatically for you (please note that DW must
be shut down for the install to work).
I gave you both links so you can find what you need quickly
and so that you can search through the exchange later in case there
are other extensions that might help you out.
Maybe you are looking for
-
How to convert Oracle table(s) in XML OR to transfer Table Schema in XML
I am using Oracle 8i (8.1.6) on the win 2000 Prof server. I want to use the Oracle database in the .NET but i am not able to connect with the Oracle.Is there any way to get the Oracle table details in .Net and generate the Table schema for that table
-
Report for specific Windows Sharepoint 2013 process OWSTIMER, (SCOM 2012R2)
Hi, I just want to check in case I'm looking in the wrong place in SCOM. A customer has asked for a report on Memory/Private Bytes for the OWSTIMER.exe process on a Sharepoint server. Is this data available by default, or is it a matter of writing a
-
Using Forms 6.0.8.28.0 on WinXP to develop custom forms. Compiling process gives error on all database objects or just hangs on some larger forms which before compiled without any problems. All database objects are valid. SQL Network connection is un
-
I trying to delete all the node from a XML that doesn't match some values. <Data> <Type id="1"> <Details id="1"> <Products id="1"> <Value>123</Value> </Products> </Details>
-
Transport RELEASE copy ?
EXPERT! One of our Functional Consultant who wrongly release the transport as local transport, Is it possible to make the copy of release transport or re-transport of release transport to QAS, which should be transport to Quality ? Regards Anwer Wase