Importing quicktime and getting no sound

Hello,
I have two files. One is a quicktime uncompressed 8 bit 4:2:2 and the other one is a final cut pro movie file codec:apple ProIO vout 2vuy imdc, interget big. I am new to final cut...anyway, when I try importing the files. I can see them on Final cut pro but I cant get any sound...is there any presets I need to modify? what can i do to import the files with sound? thanks

Do you see the audio meters moving?
Do you see audio waveforms in the AUDIO tab of the viewer?
Do other clips work?
If yes to those, make sure VIEW menu towards the bottom has the audio going somewhere where it should. It might be going back out to the deck and you'd need to switch it to the internals.
If no... well -- could be your setup. Where's the file? On your system drive of the powerbook???? Bad news there. Get it off and onto a FW drive... actually that's probably your issue. I believe 8bit will need a raid setup to play correctly.
CaptM

Similar Messages

How do I import a video and get the sound to import with the video?

I am trying to import export Final cut studio 2 quicktime files into Logic pro 7 but when I import it, I get no sound. What am I doing wrong? Also, is there a way to import a fcp project into Logic before exporting it to a quicktime movie. Thanks!!

There's a (quicktime) volume slider in the left under corner of the video. I think by default it's set to zero when you open a movie in logic...
G4 800 Quicksilver, 768 Mb Ram Mac OS X (10.4.9) Emagic Audiowerk 8, LP 7.2.1

HP Pavilion dv6700 CTO Notebook PC and I hook to HDMI cable and connect to tv and get no sound

i have a HP Pavilion dv6700 CTO Entertainment Notebook PC and I hook to HDMI cable and connect to tv and get no sound when attached to tv. I attach the cable get the video but no sound. I check sound and do not see anything other than the altec lansing speckers and realtek. Th altec lansings are the default. Help

Hello gman0700.
Welcome to the HP Forums. I understand you are unable to produce audio through an HDMI connection. I apologize for the late response, but I will do my best to assist you. Before anything else, please answer these questions:
1. What is the current computer's operating system? Does the same behaviour occur on multiple operating systems?
2. The title seems to imply that there is no audio when connected to a television, using HDMI. Does this only occur when you connect to a television? Will it occur if you connect to something else using HDMI?
3. Have you tried connecting to a television using VGA or DVI? If so, what are the results?
As an additional suggestion, for now, I would review the television's manual to confirm that everything is correct from the television's standpoint.
Please post this information as soon as you can. Thank you posting on the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

I plugged a HDM1 cable from the Sony flat screen TV into a mac pro book and get not sound. great picture. Help?

I plugged a HDM1 cable from the Sony flat screen TV into a mac pro book and get not sound. great picture. Help?

Mac computers: Frequently asked questions about using ...

Importing files and getting CD i

okay, so i got my zen, and i have a lot of music files on my comp, and...i can't use them b/c they are all realone files and i don't think i can convert them. at least, my attempts (and they are numerous) have failed. i also can't seem to, when i'm ripping cds, get the information off the internet b/c as i'm sure you know it's very tedious typing in the cd info and track names, even if you only have a few cds. please help!

The easiest way to rip and get CD info, is to use the Windows Media Player to rip your CDs. Make sure that your internet connection is on and follow this basic "tutorial" to select your format. http://forums.creative.com/creativel...essage.id=5885
We (in this forum) will always recommend that you try the formats available at a few different bit rates to determine which sounds better to you. The tutorial mentions to use either "Windows Media Audio" or "mp3" as your formats. "Windows Media Audio (variable bit rate)" is also supported. NOTE: "Windows Media Audio Lossless" is NOT supported by Creative players as of the time of this post.
As long as Windows Media Player can connect to the internet, it should automatically download all available information about the CD in the dri've.
If you want, you can change the save folder by clicking the "Change" button on in the same window shown in the tutorial. To start the rip, click the "Rip" button on the top of Windows Media Player.

Iphone to ATV2 Click Air Play on iphone and get only sound on ATV. Tried CNN, Revison 3 all apps

iphone 4 using apps such as CNN and Revision 3. Click the icon on a video that selects Apple TV. Get the sound for the app on ATV2 but do not get the video.
this used to work. Do not see any options that need to be changed.

Due to Apple HAVING to work with the "big boys" when it comes to distributing music and videos, the HAVE to be strict about how their devices work to appease the labels. Thus there are rules about how the iPhone and iPods sync to avoid piracy.
With that said, as you have read elsewhere, backups are your responsibility. It is not Apple's fault that you failed to maintain proper backups of your computer. The iPhone and iPod are not marketed as a backup device, the extend your library allowing you to take a licensed copy with you.
Now, if you turn off auto sync in iTunes. Sign into iTunes store (on computer) then connect iPhone. Then from file menu choose to transfer purchased content, it WILL take off any content you bought via the iTunes store (because it can see you own it by your account info). Any other content you got from rips or from another source, will be lost.
The end.

What is wring when you play back movies and get no sound?

What do I have to do to get sound when I play back movies purchased from Itunes?

Refer to this article:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362

Exporting to video in flash cc and getting no sound

i am trying to build a movie using flash cc and have placed a mp3 voice over on its own layer. when i play it back as an swf file it works perfectly. however, when i go to File>export>export Video i get the .mov movie but the voice over is no longer there. any idea of what i am doing wroing?
[email protected]

Can you also try this -
Add a blank keyframe or a keyframe at the starting of the sound in the timeline layer. Does this help in playing sound in the exported video?
-Sujai

How do i re-install quicktime and get itunes working again??

my brother accidently deleted quicktime off our computer not realising what it was, and now itunes wont work, it says that quicktime cannot be found and so that itunes has to be re-installed. then i somehow re-installed quicktime, however itunes still wouldnt work, and came up with the same message, so i completley deleted quicktime, itunes and everything to do with my ipod, and tryed to re-install it, however it wouldnt re-install, and so i dont no what to do! can someone please help, because i donnt have a clue what to do now!!! please!!

it is unanswered because the comment hasnt solved my
question
Hi helpimstuck!
It could be that when your original quicktime was removed it was not removed completely. I would try to install QT again then look for it in Add/Remove programmes. Try to repair if you get given the option, or if not try removing again.
Then, download the standalone QT to your desktop. Switch off antivirus and spy software and try a fresh install of QT. See if it works then.
Local retailer custom built pc. Pentium 4 chip 2.4GHz Windows XP

Logitech z906 5.1 surround sound and iMac 27 inch-how do i set up and get surround sound?

I just purchased logitech z906 surround sound 5.1 speakers and also have the new imac 27 inch fully loaded.
My only concern prior to receiving my speakers, will I be able to hook it up with my computer? Do i need any extra external HDMI cables or what not?
Sorry, Im not tech savvy so please adivse in lay english, and non-technical wording.
I will appreciate everyone's input and also will take any brand name suggestions as to if I will need to buy any other supplies to truly enjoy these speakers.
Thanks everyone.

Hi there
If you have a 2010 + MacBook Pro, then you will be able to play audio/video via the MiniDisplay Port to HDMI. You can purchase an adapter from here, or a 3rd party adapter from here.
Taylor

Had my computer serviced recently and had to reinstall itunes. Now I two accounts. How can I switch to my original account that has all the music I imported into itunes and get rid of the new account?

Had my computer serviced recently and had to reinstall itunes. Now its saying I have two accounts. How can I switch to my original account where all my music that I imported is and get rid of the new one that only shows my purchased music?

Had my computer serviced recently and had to reinstall itunes. Now its saying I have two accounts. How can I switch to my original account where all my music that I imported is and get rid of the new one that only shows my purchased music?

Broken sound card, Can i install a pci card and get sound

I fried my internal sound card plugging up my mixer through my headphone jack. I have a mirror door, dual 1 ghz prossesors. Can i just install a m-audio pci card and get my sound back. i hope so. thanks.

The answer is yes, though there seems to be very few Mac compatible sound cards. This is probably because Macs always came with sound built in. The exceptions are the Xserve which have no sound section. I have a dual 1.33GHz G4 Xserve that I have fitted with a M-Audio Audiophile 192 PCI card. This works well but is expensive new (I got mine used). My only complaint (as a general purpose sound card) you have to use the M-Audio app to change the volume - the normal volume controls don't work.
MUCH cheaper is the USB sound card option. I also have a Griffin iMic on my work Mac and this is plugged into my keyboard usb slot. That means I can conveniently plug my headphones in with just a short cord. Works great, sounds great, and works with the standard volume controls.

Cant get my sound to work :(

I recently had to format my computer because of a virus that wouldnt let me log into windows. I was running win xp pro upgrade and it was running fine. Now i run win 98se becuase it wont let me upgrade for some wierd reason. but i cant get my sound to work. i try to install the drivers but i get a screen after the install wizard to put win98se cd in, select drive and press ok. well i clicked just about every option there was. and it would either flash back to the my documents on the selection screen or ask me if i want to cancell the installation, i have no idea what to do. I dont even know if it is recognizing that i even am using my integrated sound card. i would go and get another sound card but i dont have any money right now. anyone else have this problem or can help with with this problem??? ;(
i have the k7n2g mobo with a 1800 xp athlon

Hi,
You can tell whether the system has found your soundcard hardware by looking in "Device Manager" have you yellow question marks that show hardware (but no drivers)? My apologies if you've done this.
If I remember correctly (but don't quote me) when Windows98 asks for your 98SE disc it's looking for a file within one of the .CAB files on the 98SE (Correct me If I'm wrong) disc. If not, exactly which file is it looking for? - the requester should give you a clue. When you know what the file is, do a search on your 98 CD to see if you can find it. Then point the drivers install to that location (the directory where the .CAB OR relevant file resides.)
You say that after failing to find the file on the 98 CD that it reverts to "My Documents" this would suggest that you'd previously installed drivers (or other Win98SE software) from that location. For some reason Win 98 assumes (for some stupid reason) that it'll find any future files it needs at the same location as previously installed files.
Try installing the drivers for your sound using "Device Manager" click on the yellow question mark next to your hardware (if they are available) and Windows should open the "There is a problem with this device" (or words to that effect) requester and follow the instructions (wizard) from there.
I'm going to nip off now as I have 98 SE on a different partition (I very rarely use it). I'll have a look and get back to you later.
Good luck! :D
Axel :D

Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?

Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
I've followed instructions with success until "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?
I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed. (I'm on latest Maverick 10.9.2 on iMac) Then I dragged the VIDEO_TS file from my home DVD into the streamclip app. It asked which of 4 files to use, and I selected the first one. Streamclip played the video with the sound. so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

I no longer have sound for either my audio books or my music on itunes. I've tried everything--restarting, updating, re-installing audible app, and restoring the iphone to its factory settings--nothing helps. How do I get the sound back?

How do I get the sound back on my iPhone 4? I've tried all the fixes such as restarting iPhone, reinstalling the audible app, and finally yesterday, I restored the phone to its factory settings. I still get no sound from music on iTunes or from my audible books. The phone still rings (I have sound for that) and the voice control speaks to me, and when I'm typing, the automatic text voice speaks so I can hear it but nothing else works.

Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer. As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
You can try and find 3rd party applications that might help you. I'm sure you'll pay, however.
Let this be a very important lesson learned.
Best.

Importing quicktime and getting no sound

Similar Messages

Maybe you are looking for