Importing RoboHelp7 for Word project into RoboHelpHTML - error

I am trying to import my RoboHelp7 for Word project into RoboHelp7 HTML so that I can include Captivate App Demos in my help project. (As I don't seem to be able to find out how to do that in RH7forWord.)
I make a copy of my project directory from RH7forWord. I then open RH7HTML and choose to open the hpj project file in the copy directory. It works for a bit and then reports "This project is from a newer version of the program. This project is no longer compatible with this version. Please make sure you have the newest version installed."
I have rebooted, ran all updates to all Adobe products and rebooted again. It still reports the same error.
What can I do to start using RoboHelpHTML on my RH7forWord project?
Thanks,
Jeff

Ok - I have to admit complete brain fart idiocy here. I thought I was using RoboHelpHTML v7 and I was opening v6. Both of which I have on my system, and the desktop icon for the latter I have mis-named.
Very sorry for the wasted bandwidth and thank you for taking the time to respond Peter.
I will start a new topic on going from RoboHelp for Word 8 to RoboHelp HTML 8 in a moment that I hope you will take the time to offer advice on.
Thanks and apologies. I know it is ridiculous to make such a mistake.
Jeff

Similar Messages

Importing Word docs from a RH for Word project

I have a HUGE RH for Word project that I'm trying to convert
to RHTML (RH Office X5). We generate CHM with this project, and
we've got map ids for all topics. I've been to Peter Grainge's site
to get some ideas, but I don't think they're going to work. There
are so many Word files and topics (537 and 2,974, respectively)
that the more I think about it, the more I think that a conversion
to RH HTML might not be worth it.
When I tried to import all of the Word documents and also
convert the TOC (converting the Index isn't an option since it
never worked with our large number of Word docs) and use the
HTMLHelp.css (using the Import wizard), RH HTML crashed twice after
40 minutes.
So, I created a new RH HTML project and tried to import just
one Word doc from the RH for Word project, and selected the same
wizard options. As I expected, the Word doc imported, but even
though I told RH to split the topics on Heading 2, it also copied
in the characters (#S+@) that preceded every topic heading and
incorporated them into the Topic Title. AND, RH HTML did not
"convert" the TOC - it was blank.
In another post I saw a reference to this patch -
http://www.adobe.com/support/security/bulletins/apsb07-10.html.
I'm not sure it's related, although when I examined my second
failed import attempt, the imported topics were visible in the
project folder only by using Windows Explorer - RoboHelp HTML did
not display them from within RoboHelp.
Does anyone know if this is the patch that will fix this
issue as well?
By the way, based on the number of questions I've seen posted
about RH for Word 7 with zero replies, I'm thinking I'm going to
run into issues as well, even if we leave it in RH for Word when we
upgrade to version 7. It seems that its size is an issue for RH
HTML.
Thanks,
Jim
Thanks,
Jim

Hi Jim,
just as an encouragement: we sucessfully converted a HUGE RH
for Word project (4,300 topics) to RH HTML a while ago, including
TOC, index and everything. I must admit though that we had all
those topics in only 25 word documents. Maybe you can reduce the
number of documents by moving the topics? There will always be
problems you run into and afterward, we had to go through every
single topic and check the formatting, but I guess you'd always
have to do this. But I think it's worth it, working in HTML is so
much more convenient.
Good luck!
Kathrin

I imported a COMPLETED book project into Aperture 3, only to discover that the resolution of all the photos has been reduced to totally unacceptable levels

I imported a COMPLETED book project into Aperture 3, only to discover that the resolution of all the photos has been reduced to totally unacceptable levels. Any easy solution?
Steps:
1. I finished an Aperture 2 (Two) book project and tried to submit it to Apple for printing. At that point I learned (belatedly, obviously) that Apple no longer accepts books from Aperture 2. I don't know how I would have known to even ask if Aperture 2 had been sunsetted as far as book projects go.
2. So I tried to download Aperture 3 ($79.99), only to be told that I couldn't download Aperture 3.5.1 because I was still running OSX 10.8.x. So I read current reviews for OSX 10.9.x, and ...
3. Downloaded and installed the current operating system (about a 3-hours process for me). OSX 10.9.2, here we are!
4. Then I returned to the Apple Store, found, and purchased Aperture 3. [For safety's sake, it would sure be nice to have a .dmg file I could copy and file away. I lost a perfectly legal and good copy of Adobe's Photoshop Elements 3 years ago because I wasn't smart enough to make a safety copy, and when my iMac crashed (fried electronic components), I was left with a copy of the software that wouldn't run, and couldn't be verified as legit.]
5. When Aperture 3 finished installing, I found and imported my COMPLETED Aperture 2 book project, which import seemed to proceed nominally -- the right number of pages, the right content on those pages, that sort of thing -- until I started looking more carefully at the pictures themselves. All of them, about 300 of them, have been imported into an Aperture 3 book project in such a reduced resolution that they are fuzzy at the size the book will be printed. Screen-capture of just one example (at 100% viewer setting):
I don't know what to do at this point to correct the problem, short of going through the entire book project, copy the custom captions (since those go away when you "delete" photo content), delete the photo, re-insert the photo, and paste back the custom caption. Lather, rinse, repeat - ~300 times! An estimated 2-3 hours of additional work.
Or does anyone in this community know either (1) that I did something wrong in the Aperture 2-to-Aperture 3 import (I don't recall being offered any options or choices in the process); or (2) that there is a wholesale one-step solution to my problem?
BTW, I tried to edit my "Product" info, but OSX 10.9.x is not in the pick list. I am running OSX 10.9.2
<Re-Titled By Host>

Frank, thanks for your note. I wrote "COMPLETED" because I had gone to a lot of effort to get the content of the book precisely as I wanted it. I would fully expect to see my level of effort and care matched by functional competence in Aperture 3 to render the book the way I created it. Too much to ask?
And yes, I upgraded the Aperture 2 Library first. [Not ALL my tens of 000s of pix, because I use Lightroom selectively for photo editing. But Yes to the Aperture 2 Library.] That step took a number of minutes, but seemed to work fine (no error messages of any kind).
Then I opened the existing book project in Aperture 3, which followed some "magic-box" process that took a minute or so. As I said, when that step was done, by all appearances the book was ready to submit for printing - until I examined the photos a little more closely. You did see the blurry example I included, didn't you? That is what each and every photo looks like.
Text-box content appears to have been rendered pertectly, for the record (including captions).
So, ... is this result something you have heard of before? Do you know of a one-step solution? Or am I looking at an extended picture-by-picture fix?

How do i import a large word document into Indesign CS6?

I am a new user to InDesign, using version CS6, I would like to know if there is an easy way to import a MS word document into InDesign. The document is about 1000 pages and contains text, images and tables.

Notes on importing from Word to InDesign CS6 and exporting via Kindle Plugin can be found on my blog at:
http://02cafd3.netsolhost.com/blogs/eBookTec/?p=316
To make a long story short, the Kindle Plugin has a long-standing problem with tables and/or more than a certain limit of hyperlinks. Since these problems have persisted for at least 2 years now, I must conclude that there are organizational problems on the Kindle Plugin project. The possibilities include too many junior programmers, not enough attention to the project, not enough positive incentive to make the plugin work and any number of possible management weaknesses. It took our JPL team about 3 years to put Spirit and Opportunity on Mars, so there's no way a technical problem could be standing this long in the way of the Kindle Plugin handling tables or any number of embedded hyperlinks - nor, for that matter, a Word source document of any reasonable size whatsoever. One might also cite a lack of competition in this new business sector but then you'd have to ask, do they want to play in the eBook market or don't they? Companies like Apple succeed by ignoring the competition and in this way end up setting the standards for decades to come.

Import a Premiere CS3 Project into Premiere Elements 7.

Is it possible (or NOT) import a Premiere CS3 Project into Premiere Elements 7?
Thanks a lot for any help.

It is only possible to open some PrE Projects into the right version of PrPro, but will not work the other way around. The error message that you will get is "This Project was created in Adobe PrPro and you need to open it in that program."
Even going the PrE to PrPro route is filled with potholes. I can open some PrE 4 Projects in PrPro 2.0, but not all - depends on what was done. Later versions of PrE will not open in PrPro 2.0, but some have opened in CS3 and CS4, though much can keep one from being able to do that.
Sorry for the bad news,
Hunt

Trouble Import Flash Builder 4 project into Flash Builder 4.5

Hi,
I have quite a lot of Flash Builder 4 Air project which I would like to convert all of them into Flash Builder 4.5 project. However, after I tried to import it into 4.5, the project got error and saying that "application descriptor not found".
I am posting it here because I believe it is due to improper import of the air project into 4.5. Flash Builder 4.5 should be intelligent enough to solve the problem when converting the project. Hope there will be a fix for it soon
Btw, how can I manually solve this problem so that I can get all my previous projects run on 4.5? Thanks.

Hi Yue,
I'm sorry you're running into problems with Flash Builder. Would you mind reposting this over on the Flash Builder forums? You'll probably have better luck over there.
Thanks,
Chris

I want to import a MS Word Index into a .pdf file using Adobe Pro. How do I do that?

I want to import a MS Word Index into a .pdf file using Adobe Pro. It is for a book. The book has been converted to a .pdf for printing, but it needs an Index for the last page of the book. I tried to embed a new index (starting from scratch but no luck. Any suggestions? Thank you for your time.

Now I want to search this "myArrayStrings.get(r)" in another file. How to do that?Store the returned String. Do the same thing you did to read the first file to read the second file (i.e. read it in line-by-line and store the lines in a list). Then check if that list contains the String you stored from the first list.
E.g. (using your code):
String name = myArrayStrings.get(r); // assuming r is initialized somewhere before this
if ( otherList.contains( name ) ) { // assuming otherList is your second list
// do something
}

Convert RoboHelp for Word project to RoboHTML

I have a couple projects which are created RoboHelp for Word
in RH6. The projects now need to be converted to RoboHelp HTML
projects and Flash generated outputs. In conjunction with this I
have the following questions:
1) Can RH Word projects be opened in RoboHTML? If so, what
are the pros and cons and how is the conversion done?
2) These independently projects will be linked/merged with a
master project which in RH HTML. Will this cause some inherent
problems.
3) I know I can generate a Flash based output from RoboHelp
for Word, however, how differently will (if at all) RH HTML treat
these files if called from within an RH HTML generated project.
4) I will also need to generate Printed documentation in the
end. Any impact on that?
Thank you in advance. A detailed answer would be greatly
appreciated.

All those questions and in detail too. This is a forum, not a
book shop. :-)
What we can do is give you some general guidance so that you
can experiment safely, then come back with specific questions.
You cannot open your RH for Word project in RH HTML. What you
have to do is import the underlying document(s) excluding the
footers as they contain RH for Word information that is not
relevant. Before you do anything, zip up the existing project and
keep it somewhere safe. Now you can use the project and blow it
apart without worrying. If anything goes wrong, you extract the zip
copy and start over.
There's a topic on my site about importing ordinary Word
documents (as opposed to RH for Word doc files) and that will be a
good starting point.
First get all the existing projects converted and running
properly as independent projects before you give any thought to
merging.
When you are ready, then look at the topic on merging webhelp
that is on my site. Just adapt as necessary for FlashHelp. I think
you need at least RH6 to merge FlashHelp, maybe 7. Not sure without
checking. RH6 FlashHelp has some indexing problems as you will see
in another thread.
RH generates files after which they go to development. What
do you mean by RH HTML treating those files? Do you mean will their
HTML be written differently? Almost certainly yes but why is that
an issue as long as they look how you want?
You will be able to generate printed documentation and that
is covered by yet another article on my site. Maybe now you are
getting the picture as to why nobody can provide the answer in
detail on a forum.
You have a massive task ahead of you and I think it would be
foolhardy to start with your real projects. Starting from where you
are, I would create some small RH for Word projects and then go
down the path you have to. With small projects like that, you will
be able to understand what is going on and the issues. It's the
same reason why most driving schools don't start you off in a
Ferrari!
Good luck. Glad its your problem. :-)

Arbitrary data param not importing from Premiere Pro project into After Effects.

Hi,
I have an AE SDK plugin effect that works in Premiere Pro and After Effects... the effect has a bunch of standard parameters and one Arbitrary Data parameter.
I believe that the Arbitrary data parameter is implemented correctly, and I have implemented all of the cases for PF_Cmd_ARBITRARY_CALLBACK...
PF_Arbitrary_NEW_FUNC
PF_Arbitrary_DISPOSE_FUNC
PF_Arbitrary_COPY_FUNC
PF_Arbitrary_FLAT_SIZE_FUNC
PF_Arbitrary_FLAT_SIZE_FUNC
PF_Arbitrary_FLATTEN_FUNC
PF_Arbitrary_UNFLATTEN_FUNC
PF_Arbitrary_INTERP_FUNC
PF_Arbitrary_COMPARE_FUNC
PF_Arbitrary_PRINT_SIZE_FUNC
PF_Arbitrary_PRINT_FUNC
PF_Arbitrary_SCAN_FUNC
The only issue I have found, is that when importing a Premiere Pro project into After Effects with the "Import -> Adobe Premiere Pro Project" option, the value in the Arbitrary Data
parameter is always the default. There is no problem saving or re-opening projects within AE or PP... and there are no problems with cutting and pasting instances of the effect.
Importing a Premiere Pro project into After Effects using the Dynamic Link works correctly... the Arbitrary data is imported.
Thanks.

Some kind of answer would be awesome... there are Adobe staff members on here right?

How do you import final cut pro projects into imovie? (like you create a pr

How do you import final cut pro projects into imovie?
(like you create a project in final cut but i want to save it, and import it into imovie..

Hi -
Mr. Ross is right, there is no direct way to export your project with all it's elements into iMovie.
If, on the other hand, you have a completed sequence in FCP that you want to export as a finished element, then import into iMovie for you to re-edit or apply titles, music, etc. you would:
In FCP:
Click on the Sequence Icon you want to export in your browser.
Go to the menu File > Export > Quicktime Movie. Give your movie a name a navigate to where you want it stored. Make sure you choose Settings: Current Settings and have the Make Movie Self Contained checked. Click Save.
Close FCP and open iMovie.
In iMovie:
Go to the menu File > Import > Movies and navigate to the movie you just exported from FCP. Choose if you want your movie imported in it's original size, etc.
Click Import. Your movie will be imported into iMovie.
Note that using this method only gives you only the elements that made up your FCP sequence, so this may not give you the flexibility you need.
Hope this helps.
MtD

Missing Images After Moving RH8 for Word Project

Hi everyone!
I am encountering a problem that I cannot solve, so I thought I would try posting here for some help from the pros.
I am working with a legacy RH for Word project. I currently have RH 8 and Word 2007. I relocated the project and all of its associated files from my local machine to a network drive. Now I have found that all of the image files that I have used throughout the project are showing up as broken links.
I have tried deleting and readding the references with no success.
I have also made sure that both the path to the current location and the path to the old location show up in the list under "All Project Folders" on the Help Image Properties box (with the current location on top of the previous location, if that matters).
The images display if I do the Active Test and they display when I bring up the Help Image Properties box. I have double and triple checked that the images are in both locations, but when it comes time to generate the primary layout and view it, they are broken again.
I am at my wits end, so any help you can give me would be greatly appreciated. Thanks!

Many moons since I have used RoboHelp for Word but I am suspecting the issue is moving the project to the network. I think it is OK to have the documents on the network but not the project.
Not sure and more than happy for a RoboHelp for Word user to chip in and contradict.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How do i import an iMovie 08 project into Imovie 11?

How do i import an iMovie 08 project into Imovie 11?

I don't still have iMovie 08, but this method works in iMovie 11.
Go to...Home, movies, iMovie projects, find the project you want and right click and click "show package contents".
That will show a movie file and some other files. Drag the file to the desktop and rename it .mp4.
then go to iMovie, import, navigate to the mp4 file on your desktop and it will let you import to the events section and then you can add it to your movie.
Takes a lot longer to describe than to do. The quality seems to be preserved though I don't know if titles etc get transferred over, kind of doubt it.
Hugh

Its possible import a After effect projects into Motion 5?

hi guys
its possible import a After effect projects into Motion 5?

No you can't do that. Unless AfterEffects can export some sort of XML, even then I doubt everything would be translated. One way is to export layers
you know won't change as movies and import them into Motion. Then just recreate the layers that you need to change.
a

How do I import RH for Word WinHelp project into RH7 HTML?

I'm trying to convert a WinHelp project (created by someone
else in RH5 for Word) into a full HTML Help project in RH7, so that
I can build HTML Help or WebHelp outputs.
I have tried Menu > File > New > Project > Import
tab > select WinHelp Project. In the Wizard, I select the Help
Project to Import, click Next, then select the Output folder. But
there are no Source Documents listed to import. They are visible in
Windows Explorer, but RH7 does not see them. I cannot step Back /
Next or Finish without selecting files, so I can only Cancel and
try again.
Any ideas anyone?

Work-around
I discovered by trial and error that if I open the RH5
WinHelp project in RH7 first, then close it, this adds lots of
other files to the project folder.
Then I can import it into RH7 HTML.
That solves this question.

Converting RoboHelp 7 HTML Project to RoboHelp 9 for Word Project?

Due to complications in localization, I've been asked to evaluate authoring in doc files instead of HTMs, since the tool we use for localization (Across Server) seems to work better (or so we're told) with doc files.
I've only authored in RoboHelp HTML with a CHM output for the last several years, so I'm unfamiliar with RH for Word. But I have used Doc-to-Help many years ago, so I'm somewhat familiar with the implications of using doc files.
How would I go about doing this conversion? Is there some utility that does this, or is the best way to export to a printed output and then import that output into a new project?
I'm also going to evaluate this using RH 9 since I'm considering upgrading from RH 7. I only have Word 2003.
Thanks in advance,
Jared

RoboHelp for Word has only had minimal changes for the last two versions. Take a hint. Also enhancements to RoboHelp HTML outputs have not been mirrored.
I suggest you do some work in RoboHelp for Word and see how much you enjoy it.
As for conversion, open RoboHelp for Word and see the import options. Your idea seems to be the way to go, if you really really have to.
Oh, one more thing, you will not get much help in the RoboHelp for Word forum because there is hardly any user to user support.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Importing RoboHelp7 for Word project into RoboHelpHTML - error

Similar Messages

Maybe you are looking for