Importing sets "part of compilation" all the time, even when it shouldn't.

I've just instaled iTunes 9.01 and have been importing about 5 CDs worth of music. The problem is that iTunes seems to be setting the "part of a compilation" flag every time even though none of the CDs I've been importing are compilations CDs.
I know that sometimes the gracenote database has the CD tracks incorrectly marked as compilations when they aren't on a compilation CD. But I've imported 5 CDs in a row and they've all been marked as compilations, so I am starting to wonder if iTunes is the one setting the compilation flag.
Has anyone else seen this problem?
The net effect is that after I import a CD, it doesn't show up in the genre/artist/album browser. Instead it shows up in the compilation list. So I end up having to go into the imported tracks and uncheck the compilation flag
This is made even worse by the fact that I can't select all of the tracks at once and open up the info because when you select multiple tracks and open up the info there is not "part of a compilation" flag that I can see. So I end up having to open up the tracks one at a time and unchecking he flags one at a time, which is a pain in the butt.
Any suggestions on how to fix this would be very much appreciated!

+This is made even worse by the fact that I can't select all of the tracks at once and open up the info because when you select multiple tracks and open up the info there is not "part of a compilation" flag that I can see. So I end up having to open up the tracks one at a time and unchecking he flags one at a time, which is a pain in the butt.+
+Any suggestions on how to fix this would be very much appreciated!+
You've probably already found this out, but just in case someone else is looking for the answer:
In order to 'undo' "Part of a Compilation" that iTunes did on an imported CD:
*Right click on the album, Choose 'Get Info' and click yes when asked if it is ok to set info for multiple items.
*Click the 'Options' tab.
* In the middle of the dialog is the option 'Part of a Compilation' : Check the box on the left and change the option from the drop down menu on the right to 'No'.
*click 'Ok'
Make sure you give the group of songs an Album Artist or Album title so that the songs end up in the desired folder.
Hope it helps.

Similar Messages

HT1414 I attempted to update my iphone 3 through I tunes - I think I did a back up on my pc - I am now unable to use the phone at all - it cannot be turned off and seems to be syncing all the time, even when it is not connected to itunes.

I attempted to update my iphone 3 using itunes. I'm not certain but I believe I did a backup on my pc first. I am now unable to use the phone at all - the slide bar won't move and I have a camera icon next to the slide bar which is not responsive. I have tried to sync and even left the phone connected to the pc overnight. The phone is going flat within a couple of hours and won't stop beeping every few seconds and seems to be syncing all the time, even when disconnected from pc. I am fearful that I have lost all my contacts - nothing is working - can anyone help - please?

Try resetting it if you can: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), then release. If you can't, try to connect it to iTunes, go to the Summary tab of your sync settings and click Restore to restore it. If that doesn't work you'll have to force it into recovery mode to restore it as outlined here: http://support.apple.com/kb/ht1808.
You can check in iTune to see if you have a backup. They are listed in iTunes>Preferences>Devices. However, the backup may not bring your contacts back as contacts are only backed up as necessary to preserve the recent call and call favorites lists.

My sim says searching all the time even when i take out my sim card

MYiPhone 5s sim place searching all the time even when i take the sim out of the phone

Is your phone activated?
have you contacted your cell phone provider?

WRT54GX2 slow connection all the time, even when right next to it.

My connections are always dropping since I bought the router. Even when I am close to the router the connection is still slow. I keep my PC optimized always so I have ruled out the laptop. Are there any setting changes that I might try? I use my wireless connection only for my laptop.
Here are the stats:
WRT54GX2 - Firmware 1.01.18
Not sure what version I have (ver2 or ver1)
Connection Type - PPPoE
NAT - Yes
Unique SSID
G-only
Channel - 11
Broadcast - NO
Security Mode - WPA/WPA2
MAC filtering - YES
Basic Rate - set#2
Trans Rate - AUTO
Beacon Interval - 100
DTIM - 1
Frag Thres - 2346
RTS Thres - 2347
Laptop - IBM Thinkpad Z60M w/Atheros card
Thanks in Advance!

I used to recommend that "SSID Broadcast" be disabled for security reasons. But newer cracking methods have made this old trick practically worthless. So set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal. You security comes from using WPA/WPA2 and a strong password.
Windows XP requires a patch to properly run WPA2. Go to Microsoft Knowledge base, article ID=893357 and it will direct you to the patch.
Sadly, the patch is not part of the automatic Windows XP updates, so lots of people are missing the patch.
Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
If the above does not correct your problem, download and install the latest driver for your wireless card.
If you are still having trouble, download and install (or re-install) the latest firmware for your router.
Hope this helps.
Message Edited by toomanydonuts on 08-04-2007 02:55 AM

Automatically connects to sync and will start playing music all the time even when not using sync

My iPhone 4S will automatically start playing music as soon as I start my vehicle with sync.you can't hear it but on the screen it shows its playing even when listening to the radio

Try resetting it if you can: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), then release. If you can't, try to connect it to iTunes, go to the Summary tab of your sync settings and click Restore to restore it. If that doesn't work you'll have to force it into recovery mode to restore it as outlined here: http://support.apple.com/kb/ht1808.
You can check in iTune to see if you have a backup. They are listed in iTunes>Preferences>Devices. However, the backup may not bring your contacts back as contacts are only backed up as necessary to preserve the recent call and call favorites lists.

Problem: Fan at full speed all the time - even when the Mac is turned off

Hello,
my Mac mini suffers from a very strange problem. I've had it for half a year now and recently bought a new power adaptor since my old one got damaged. I plugged it in and everything was fine - until half an hour afterwards, when the fan suddenly made itself noticeable at full speed. But it didn't stop; it went on, curiously even when I shut the Mac mini down. That's right. even when the system's turned off. The noise is really unbearable and only stops when I plug off the power cord.
Any ideas why this is happening?

My Mini started doing this yesterday. I came home from work and the fan was going full blast. Even after shutting the machine down, the fan would continue to run at full speed (and it is LOUD...much louder than my full tower desktop PC with 4 80mm fans). The only way to stop the fan is to completely unplug the Mini from the power supply.
I doubt that this is due to faulty wiring as my Mini is plugged in to a very nice UPS unit that conditions the power.
Now, I'm willing to admit that this may be entirely my fault since I have upgraded my Mini with 1 GB of RAM, a Pioneer DVD burner, and a higher capacity hard drive. However, the Mini has been running 24-hours-a-day for 5-6 months since my final upgrade, so it would seem that my upgrades are unrelated to this issue. Also, since someone else is having the same problem, again, my upgrades seem unrelated.
I was told on another forum to try resetting the PMU, which I will try when I get home today. If it works, I'll post. Seems unlikely though since the fan runs even when the Mini is powered down.
If anyone has any other ideas, I'd be glad to hear them. I'm assuming that my Mini is no longer under the 1-year warranty since I have performed so many upgrades myself, so, if this problem is something that can only be fixed by Apple, then it will probably cost an arm and a leg.

My iphone 5 has been rebooting randomly after updating to ios 7.1.1 and the battery bar now stays the same.this has been occuring all the time even when batery level is high.it also happens when it is also charging.

Please help me. It is really getting irritating

Hi AimanBms,
If you are having issues with your iPhone restarting unexpectedly, you may find the following article helpful:
iOS: Device unexpectedly restarts, displays Apple logo, or powers off
http://support.apple.com/kb/TS5356
Regards,
- Brenden

Mail crashes all the time and when it doesn't, it is very slow?

Mail crashes all the time and when it doesn't, it is very slow.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

My ipod touch 4 has recently started shuffling all the time even though I don't ask it to. Why has this happened and how can I stop it?

My ipod touch 4 has recently started shuffling all the time even though I don't ask it to. Why has this happened and how can I stop it?

Music automatically shuffling This discussion thread may help you.

Since upgrading to Lion the screen auto brightness adjusting icon comes on allmost all the time even though i've switched it of in preferences?? it's so annoying..any ideas??

Since upgrading to Lion the screen auto brightness adjusting icon comes on allmost all the time even though i've switched it of in preferences?? it's so annoying..any ideas??

I don't know exactly what the issue is, but I think I do. Are you talking about what happens when you start up your MBP, full brightness, with power cable in - and when you're using battery only, the brightness dims? If so, this is a feature designed to make sure your monitor is bright enough while using batteries - but not so bright as to cause an undue drain on power.
I don't know about a cure to this issue, if indeed this is what you're talking about.

Fan on all the time even with apps closed

why is fan on all the time even with apps closed?

try an SMC reset: http://support.apple.com/kb/HT3964

I can't download the latest update and my phone loses WIFI all the time. When I try to connect and put in my password, It just keep searching and searching.

I can't download the latest update and my phone loses WIFI all the time. when I try to connect and put in my password, it just keep searching and searching.

You can download the latest iTunes (version 11) here:
http://www.apple.com/itunes/download/
If you just want to stay with version 10, you can get 10.7 here:
http://support.apple.com/kb/DL1576

How can I set comments to show all the time?

I need to have the comment bubbles show on the spreadsheet all the time. But they are in the background, only showing the little yellow tag on the cells with comments. The "Hide Comments" in View is not marked.

Ali,
That feature is gone in Numbers V3.
Jerry

Num Lock key set to be on all the time

Help. Can't find anything related to my new FLEX 2-15 laptop anywhere! Holy cow if I had known that I would have searched for another make. I would like to keep the NUM lock on all the time but can't find how to make that change on this FLEX laptop. Help please.
Thanks

Hi @treismine2,
Welcome to the HP Forums!
It is a dynamite place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you have the Lenovo w FLEX 2-15 laptop. You may wish to post in the Lenovo community for assistance with their products.
Lenovo Community
Regards
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

IPhone 4s looks shut down all the time.especially when the 3g is on.in the forums its said to push the use button and the power button at the same time.the people calling me cannot reach at my phone.what should i do ?

my phone looks like offline all the time.its all about me to notice that its offline.then i have to push the main button and the power button together to open it.then the apple sign comes on the screen and the phone turns online.but i cannot receive the information of who called me at the time that my iphone 4s turned offline by itself.i cannot receive messages at all.what can i do now ? i sent the phone to the service and they just told me that they installed the current version.but i guess nothing happened.its doing the same thing again.i cannot use my iphone.
From Turkiye.

I've tried all those.But nothing works.The phone seems to be shut down.But it is not.When i get it out of my pocket, for example to call someone, i touch to main button but nothing happens.I solve it by pushing the power button and the main button together just for a couple of seconds, as its said so in the forums.
also, people told me that they were calling me, my phone was ringing but i didnt answer?...i checked it for millions of times, it seems to be shut down, but its normally not.then i push the buttons together and the apple sign comes on the screen.it searches for the network.and it works.
but i do not see any calls, texts anything.but for the others, they say my phone seems to be workin.
I thought it was 'cause of the 3G is switched on but when I turn 3G off, it does the same thing.it seems to be offline all the time.

Importing sets "part of compilation" all the time, even when it shouldn't.

Similar Messages

Maybe you are looking for