Importing sound into Premier Pro CS3

I have a Sony HDR-XR100 HD video camera. It saves files with an .m2ts extension. This extension is not supported by CS3. Using Sony's PMB (Picture Motion Browser), I convert the .m2ts files to .mpeg2. When I import these files into Premier, they appear, but have no audio. How do I import the audio? Thanks.
David

I put it in the main Premier folder, presumably like you did, and it worked. I'm not real familiar with Macs, but the folder I put it in was "C:\Program Files\Adobe\Adobe Premiere Pro CS3". There are several other files there with similar names. If that doesn't work, I'm lost, since obviously I had to come here for help myself :).
David
Date: Fri, 23 Jul 2010 19:40:24 -0600
From: [email protected]
To: [email protected]
Subject: Importing sound into Premier Pro CS3
Hey, I'm using CS for Mac and I'm having the same issue , importing .mpg into PPro and get no audio.
I found the ad2ac3dec.dll file online but I'm not sure what folder to place it in. I've found the folder named Adobe Premire Pro CS3 and just pasted it into that but it didn't work.
My camera only records in .mpg and I really don't want to spend money on a converter after spending a bucketload for CS3...
Any help would be much appreciated!
>

Similar Messages

How do I Import footage from Premier Pro CS3 to After Effects?

Hi
As the subject says, how do I import footage from premier pro cs3 into after effects. I'm getting rather frustrated trying to figure this out.
Via copy & paste I can copy into after effects but this copys the whole of the track on the timeline, where as I just want 10 seconds copied. The 10 seconds I want to copy is a segment & was highlighted when I clicked copy.
Also when the full track gets copied, all my edits aren't copied & I get the raw track copied???
I've googled this, tried the "Add Dynamic Link" but all I want is to copy 10 seconds of footage from premier into after effects, add my effect & then copy it back, and I can't figure out how to do this simple thing
Any help
Thanks.

I am still not getting this.
I highlight the selection I want to copy into after effects. I copy & paste it & it pastes my entire footage without any off the edits I have made.
Having searched loads for this I can find no other answer than copy & paste.
Please please could you guy be more specific with your answers as I just can't figure this one?

Cannot import mpg files into Premier Pro CS3

I've read the wiki and looked through the FAQs and did not find this issue, so here goes.
The file began life as an mp4 from a GoPro HD camera. It plays correctly in Apple's software, but will not import into Premier. Found the KB on
Error message "Unsupported format or damaged file" when you import MP4 clips into Premiere Pro CS3 and changed the extension to MPG. This got me audio, but no video. The MPG plays correctly (audio and video) in Windows Media Player as well as in Bridge CS4.
Windows Vista 64-bit, 8 Gig RAM, Intel Q9300 Quad Core Processor, GeForce 9600 GT video card w/1Gig DDR3 RAM.
Any ideas?
John

PrPro is pretty well centered on pro formats. Many find that other NLE's, designed for consumer cameras and formats, work better and some natively. It's a tough call. I love the interface and workflow of PrPro, and use it 99% of the time. However, with heavily-compressed, delivery-only formats/CODEC's, some other NLE's work better - to start. I use those as converters, or do batch conversions with DigitalMedia converter, but it's shareware, and not freeware.
Some users want PrPro to embrace every possible CODEC and variation on each, with hourly updates, as mfgrs make changes, and others want it to only perform 100% with pro-formats and leave the consumer stuff totally alone - there is PrElements for that. Me? I just roll with the punches, and convert from X to Y, and edit in my chosen NLE. Kinda' the "Jimmy Buffett" of video editing.
Good luck,
Hunt

Help Trouble Importing Files into Premiere Pro CS3 !!

Before I reinstalled my computer, I was able to import HD MOV files into Premiere Pro CS3 without a problem but now it it says file not supported! what is going on?? Am I missing a driver since I reinstalled my computer? Thanks Please Help

like magic ! how cool...
you might mark thread answered so others dont keep going to it to " help " ...
good luck with new computer stuff...

Importing .avi file into premier pro CS3 without losing quality

I have used CAMStudio to capture datalogging on my screen. The file size is 1280 x 800 pixels with a frame rate of 200 frames/second. I have tried using virtual dub and many other programs to create an avi file that I can import into premier without losing quality. None of this has worked. I have tried using the forum post http://forums.adobe.com/message/2060872#2060872 but this didn't work for me either. If anyone has a simple solution for this problem I would greatly appreciate it. Even if anyone could suggest a different screen capture program the will smoothly import into premiere without losing quality.

Very recently, Jeff Bellune posted his workflow for Camtasia/CamStudio material. I'd do a Search for "Techsmith" then filter on this forum and on People = Jeff Bellune. IIRC, he basically updated Dan Isaacs' suggestions. I do not think that his techniques were limited to CS4, but could be wrong.
If I can find that post, I'll add the link here. Actually, I need to make sure that I have that link in an article that I did on Camtasia/CamStudio workflow elsewhere.
Good luck,
Hunt

Missing audio track when importing video into Premiere Pro CS3

When I import my M2TS video into the editor there is no audio when viewed in the source. There is also no audio track when I drag a clip down to the timeline. Any fix for this?

I have the same problem with M2TS files in Adobe Premiere Pro CS4. The audio track is there - Adobe Premiere just doesn't recognize it. If you open the same clip in Nero Showtime, Corel Ulead VideoStudio, etc., the audio will be there. The audio is probably multiplexed.
I have been recording High Definition TV using the Hauppauge HD PVR 1212. About 15-20 % of the M2TS files recorded will be seen as video only clips by Adobe Premiere. The remaining clips will be conformed by Premiere and you will have a Dolby Digital 5.1 audio track. If you convert the video only clips to .MP4 and then re-import them into Premiere you will then have the Dolby Digital 5.1 audio track back and you're good to go.
I use either Xilisoft or Arcsoft media converters to change to .MP4 files. If you use Arcsoft you will have to render the clip. The files converted by Xilisoft don't have to be rendered for playback.

Hollywood FX PRO v5.1 into premier pro cs3

Hi friends,
I have Hollywood FX PRO v5.1 but it is not working for PPR CS3. I need to use this with PPR so is there any Idea? Please somebody let me know.....
Thank you.
Jey.

Do a Search for "Hollywood FX" in this forum. About 8 mos. ago, there was a thread on doing this. Going back to earlier versions, there were some renaming tips for using HW-FX with PrPro. However, with the Pro version, some other things had to be done. It seems that one was getting things to work in Vista.
IIRC, the OP for that thread found a workaround that worked perfectly for them. I just do not recall what that workaround was. Maybe success is just a search away. Unfortuntely, I do not recall any of the posters to that thread to help you more.
Good luck, and please update this thread, if you have success.
Hunt

Importing WMV into Premiere Pro CS3

When importing some wmv-files into Premiere only the audio-part imports. No video.
Other wmv-files imports without problems.
The problem seems to occur only with files converted (from mov?) to wmv on Mac-systems.

Henrik,
I'd do a conversion of the WMV's to DV-AVI Type II outside of PP. Import the converted files and you *should* be able to edit them. Quality will likely have taken a hit, but as you do not have the original files, that is the best you can do.
Always request that your client, or whomever, furnishes you with a DV-AVI Type II in the future.
Good luck,
Hunt

Importing MP4 Into Premiere pro CS3

Hi I'm Hayley, I was just wondering, I have footage in a strange format; .mp4, and it wont import into Premiere. Someone asked me if I had all the updates, etc, I do, and still no luck with it...
I was thinking of doing a reinstall of it, but if i do that, I will likely have to download all my updates and stuff all over again, and in the end, the mp4 thing still may not work.
Before I try the reinstall, I was just wondering if anything else can be done about the format.
Any ideas, friends?
Thanks in advance!

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Once you know the codec, you may post again to ask how to edit what you have

Importing Kodak .mov files in Premier Pro CS3?

I am using Premier Pro CS3 and I have a new Kodak Playsport Zx3. Kodak says the .mov clips are 1080p, and 30 frames a second. I tried importing clips into CS3 and I get 'file type not supported' error. The manual says .mov are supported. What am I missing? Do I need Quicktime installed for importing the files?

Welcome to the forum.
Can you tell us more about your computer?
If you are getting the "Not Supported" error, then it is likely that you do not have the proper CODEC's installed. For the MOV format, those are usually installed with Apple's QuickTime Player. Do you have that installed? If not, it is free, though IMHO, is not that great a player. In your case, you only need the CODEC's that it installs.
Good luck,
Hunt
PS - something else to consider is that many camera mfgrs. will ship their own version of the CODEC's, and these might be on the CD/DVD, that came with the camera. Sometimes, the CODEC is an extra install, sometimes it's built into the driver for the camera, and sometimes, it's part of some video editing program, that ships with the camera. It just depends.

Importing vob files into premier pro

When I import a file from a DVD into Premier Pro, it only shows two thirds of the screen. All is viewable when watching DVD which is in widescreen.
Can anyone assist?

Hi Ann,
Here is a screen shot with sequence setting dialogue box open as well as a DVD player shot showing the full version of the video screen. (Unfortunately, the pic of the video would not translate). I have been told by Adobe that it may be the video card not operating well with the recently downloaded Yosemite OS.
Still searching.
Vic
Vic

Can animated titles created in Titlemotion imported into Premiere Pro CS3?

Hi,
We are using Titlemotion Software(Standalone Version)for creating animated titles.
We would want to use these animations into Premiere Pro CS3.
We can save the animations made in Titlemotion as
1) an FX-script,
2) a targa sequence &
3) a '.VIA' format.
'VIA' files created in Titlemotion do not get imported into Premiere Pro CS3, Premiere Pro informs that they are not supported.
Is there any way to import a .VIA file into Premiere Pro CS3?
OR
Is there any work-around wherein animations created in Titlemotion Pro could be taken into Premiere Pro CS3?

Save as a targa sequence with an alpha channel.

When I try to import video clips into Premier Pro 6 the audio and video aren't synced.

When I try to import video clips into Premier Pro 6 the audio and video aren't synced. I can moved both of them around without the other. This creates a lot more work. I have looked on forums etc but can't find the answer Can you please help.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
-and Source Patching http://forums.adobe.com/thread/1442800?tstart=0
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

Import AVCHD video footage into Premier Pro CS6 - MAC - AUDIO MISSING!

Hi,
Ive been attempting to import AVCHD video footage captured on a Panasonic into Premier Pro CS6 on my MacPro. I've tried this from the camera and after copying the entire folder to my desktop. The footage is there, but has no audio! I have read loads, forums, advice, YouTube vids and Adobe manuals, trouble shooting and help, but found no simple answer to this simple issue.
Any help would be appreciated.

Thanks too Jeff. Sandeep's post is a simple redirect to a post on Adobe which naturally I've already read before turning to the forum. The link then sends you to another link! Info. is too light on specifics, doesn't help! I have 6.0.5 as downloaded from Adobe... no joy! All remains the same, picture but still no audio! Maybe a compatibility issue with Panasonic's HC X900... but Panasonic's website is as light on info. as Adobe. I'm off to the shop to buy FCP or Avid.

How Best to Import iPhone 4 video into Premier Pro CS5 - Settings for new import "sequence preset"?

Shooting video with my iPhone 4 (ATT version) and am trying to import file into Premiere Pro CS5 (5.0.3) running on Macintosh OS 10.6.6.
The problem is that I am simply guessing on how to import sequence, and the result is that I am getting motion artifacts and generally inferior quality. I am using iMovie 11 as my basis for comparison.   Not surprisingly, iMovie 11 imports from iPhone beautifully, but when I've looked around inside of it for properties, there isn't much to see.
From using Apple's built in quicktime "inspector," it is possible to see that iPhone4 video has following properties:
".mov" file
dimensions:   1280 x 720
codecs: H.264, AAC
Color Profile:   HD (1-1-1)
Audio Channels: 1
Total Bit Rate: 10,543
PPRO - PRESET DESCRIPTION:
<my comments in angle brackets>
???? = Question
General
Editing mode: DSLR    < Correct?   Best i could do, perhaps it should be "Mobile Device" perhaps it doesn't matter>
Timebase: 29.97fps
Video Settings
Frame size: 1280h 720v (1.0000)    <from apple quicktime "inpector" window >
Frame rate: 29.97 frames/second     <from apple quicktime "inpector" window >
Pixel Aspect Ratio: ????
Fields: N????
Audio Settings
Sample rate: ?????
Default Sequence
Total video tracks: 3
Master track type: Stereo
Mono tracks: 0
Stereo tracks: 3
5.1 tracks: 0
Submix mono tracks: 0
Submix stereo tracks: 0
Submix 5.1 tracks: 0
Seeking advice on how to smoothly and *losslessly* import/ingest iphone4 footage into PPro CS5. (I am not worried about exporting for iPhone display, which is what most of the information I can find relates to).
Thanks in advance, Michael

Wow. Thanks Colin.
When I follow your approach, I don't get the same "sequence preset" dialog box popping up.
FU question, though, the motion is frequently jagged. Is there a way to smooth out/increase the quality of the rendering?    I have 16gb ram, Mac Pro.   which is able to handle iPhone video rending fine in quicktime.   (I've tried rendering for "performance" and "memory" but both seem to produce, eh results.).
Michael

Importing sound into Premier Pro CS3

Similar Messages

Maybe you are looking for