Importing still images

Hi,
When creating a movie in Final Cut I normally make a title screen in Adobe Illustrator just giving some general info about the sequence (title, date etc.). I export this as a jpeg and then bring it into FCE.
In Illustrator I set the title image to what I believe is the correct size (1024x576 pixels) but when I bring it into FCE it has two small black bars along the top and bottom. This isn't anything to do with 16:9/widescreen - I normally rescale the image to make it a pixel or two larger until it fills the screen. This solution works ok - but I was wondering if anyone knows how to export from Illustrator (or a similar program) in a way that the image fits the screen perfectly.
Thanks
Jack

Yeah, sorry I didn't go into more detail. I am working in DV PAL Anamorphic.
Im using FCE 2.0.2 and Adobe Illustrator 11.0. I do have Photoshop 8.0, but I'm using Illustrator as the template I've been given was created in Illustrator. If going into Photoshop and creating the title screen there would be better I'd be prepared to do that. Anything to make the process straightforward.
Jack

Similar Messages

Can't import still images into a project or create a podcast track

I'd be grateful if anyone can explain why I can't import still images onto a track like you can easily do in garage band - in garage band you simply create a podcast track, then drag your photos onto it. However in logic, when I open the media browser i can get a photo folder up but it will not allow me to even look at the contents.
Also, why is it that the manual for logic express has nothing about how to import a movie to produce a movie score - and yet garage band can even do this.
Thanks for any advice.

Have you tried "Working with Video" section of the manual? It's somewhere close to the end...
Logic works with audio, not images. That's why you can't import a photo, because media browser is used to locate audio files, mostly. And sometimes video.
I guess it works this way, you create a podcast with Logic, bounce it to mp3 or another compressed format. Then import it into GB and insert a photo.

Animation. How do I import still images in final cut pro x (from dragon frame) duration 3 frames pr. image?

Animation. How do I import still images in final cut pro x (from dragon frame) duration 3 frames pr. image? We have allready tried to set stillimages duration in preferences to 0,08 sek, but it does not have any effect!

You can drag your images to the timeline, select all, ctrl-d and set the duration to 3 frames by typing 3 and enter.
Or you can use Quicktime 7 to "open image sequence", select the desired duration, export your animation to quicktime and import that into FCP X for further editing.

I want to import still images to make a stop motion animation, but when I try to change the duration of still images, it isn't reflected in the timeline. How can I do this?

I want to import still images to make a stop motion animation, but when I try to change the duration of still images, it isn't reflected in the timeline. How can I do this?

Tonaw,
If you import your still images using iPhoto, then the time you set for each still, using FCPX Perferences works.
You can set the durantion from 1 frame to as long as you want them view.
If you do not use iPhoto to import your stills, the default is 10 sec's.
FYI: This issue was brought up within a month after FCPX was released. They found out by using iPhoto, you had better control of the amount of time your still was viewed.

Premiere Pro CS5 won't import still images correctly

I've about had it with this pile of ****.
Brand new install of Premiere Pro CS5. When attempting to import still images, random images will show up as other images. i.e. in Windows, I'll have the following:
one.jpg (shows up at one.jpg)
two.jpg (shows up at two.jpg)
three.jpg (shows up at three.jpg)
Once I import them into PPro, I get this:
one.jpg (shows up at one.jpg)
two.jpg (shows up at two.jpg)
three.jpg (shows up at one.jpg) <-----
In other words, three.jpg is named three.jpg in PPro, but when I bring it into a sequence, or view it, it displays the image from one.jpg
I've tried clearing the media cache, renaming the images, moving them to different directories/drives. Any suggestions? Or should I just get my money back ffs. Thanks for any help.
-Eric

You've stumbled onto a bug.
Here's the interim fix.
Imported Image Links Problem
And here

Adobe Premiere Pro Help | Importing still images

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/importing-still-images.html

I might be incorrect in this, but think that there is a Ps Script, that will do what you want.
I would ask in the Photoshop Forum: http://forums.adobe.com/community/photoshop
and also in the Photoshop Scripting Forum: http://forums.adobe.com/community/photoshop/photoshop_scripting?view=discussions
If my memory is not totally hosed, one of those should yield the Script (if it exists, as I claim to remember) for that task.
Good luck,
Hunt

Default duration time for importing still images

Hello all,
Is there an easy way to change the default duration time for imported still images?
I have thousands of images that I want to import to make a time elapsed movie. I would like for these images to have a duration of less than a second. I could do this individually, but it would take forever.
Can the default duration time for imported images be changed?
Thanks,
Adam

Hi
Too long time I made anything serious in iMovie HD6 (altough a a very competent editor)
(Took the FinalCut leap)
As I remember (just tested) it - if photos are imported then it's a tedious labor
to set duration - one at a time. No global function I can induce.
BUT - I would put my photos into a separate folder in iPhoto so that they are easy
to get in iMovie from audio/photo browser.
Then I select (in iMovie) the first photo and double click on it to view it on canvas.
Now I also get a small gray window where I can set size and duration.
I select 01:00 (1 sec) in duration and Apply/Use.
Then I selec the rest of the photos and drag them down to TimeLine after first
photo. And they also get same duration of 01:00.
Yours Bengt W

Order of Imported Still Image

Hi
When I import a series of still images into imovie, the order is back to front ie. 25-1, how can i set it so they are in the right order ie. 1-25
Thanks

OK, another idea:
Did you select them by clicking on the first and shift-click on the last?
How about reversing the order: Click on the last and shift-click on the first.

Set duration of imported still images down to 1 frame

Is there a way to import images into FCPX (10.1.1) and set it so the images will be only 1 frame when put on the timeline? Or to change their duration in the Event viewer after they are imported? I found the "duration" setting in the editing preferences, but that's in seconds and doesn't do what I want. For what I'm doing now I want them at 1 frame, but really I'm looking for total control of the length of bulk still images without having to cut each individual one down on the timeline.

Put them in the timeline. Select them all. Press Control-D. Enter 1 and press return.

Quality issues when importing still images as frames for animation

hello,
i've imported roughly 600 hand-drawn and scanned (600 dpi) images as frames for video. the images themselves are really crisp and perfectly how i want them to appear. i've imported each to play for 2 frames then move to the next. once done, i save this video file as an .avi. i then repeat the process in order to layer the video (using Calculations filter) over and over again, to fill up the screen with overlapped, layered animations. in theory, these layers should all remain crisp, just like the scanned images. i was under the impression that the standard Export... > Movie... .avi file is essentially lossless and is best for editing, however when my process is completed, the final product is muddy, grainy, and pixelated. i'm not sure where i am going wrong, as i've actually done this process before with success.
is there a way to specific the working file as "high definition" or something similar so that the quality is just as crisp as the scanned images i am using as source
any help is appreciated - i am completely self taught in video editing and it is really bugging me that the file output is not how i envisioned.
thanks,
DB

I note you specified that the images were 600 dpi. The dot per inch are an issue only for printing a hardcopy. For video work, the issue is the pixel dimensions and the pixel aspect ratio. If your image is 600 pixels by 400 pixels with a PAR =1.0. If your sequence is 1440 x 1080 with a pixel ratio ratio of 1.33, then the images must be the same and PrPro must scale up the image. You can get good images from imported stills in PrPro. I prefer to rescale my images using Photoshop. I am told that the scaling algorithm in PrPro has been improved. But regardless, if you are scaling up, you will see degradation becauae Prpro has to interpolate between pixels to fill the video frame.

Cannot import still image: jpeg/tiff/png/gif/ai/psd

Hello all:
I'm running into a strange error. No matter what size image I try, I cannot seem to import a still image into Adoe Premiere Pro cs4 running on Mac OSX 10.6.2
The error I receive is a "File Import Error: File Video Dimensions width/height too large."
I've tried the following to isolate why Premiere is returning this error:
- importing images at different sizes: 100x200, 1000x2000 etc
- saving the image as different file formats: jpeg, tiff, gif, png etc
- importing it as an illustrator file
- importing it as a Photoshop file
None of that worked. I'm at my wit's end and I can't seem to find anybody that has experienced this error before.

Here are some threads to check:
http://forums.adobe.com/thread/387776
http://forums.adobe.com/thread/480381
http://forums.adobe.com/thread/387156
http://forums.adobe.com/thread/443138
IIRC, the third one is for the Mac, but might be useful info in all.
Good luck,
Hunt
PS - welcome to the forum

Problem with importing still images

When I import images for creating a time-lapse video, some of the images are automatically being rotated +90 degrees. If I go through an manually correct them, they end up not be in the correct position or the correct scale (even though scale says 100 for all of them).
How do I prevent the autmatic rotating of still images?
Thanks,
Ricky

Check its properties in Windows Explorer. If that shows it as 664x1000 then PRE is importing correctly and IrfanView is 'auto-correcting'.
I seem to recall that IrfanView does "non-destructive" Rotation, unlike PS/PSE, where the actual pixels are rearranged, and are exported in that condition, with Save/Save_As. Might be something in the IrfanView Rotation scheme? Just a guess on my part, too, but I would anticipate that the Rotation in IrfanView is getting in the way, as other programs do not see the full effect of that scheme.
Not sure what "image viewers" are installed with Windows, but I would Open one of those problem files in, say Windows Paint, or Windows FAX Image Viewer, or something else than IrfanView to test.
Good luck,
Hunt

Sequence A/V settings for imported still images

I want to create a HD DVD containing a slideshow of still images with some transitions, title and ending pages and sound.
Question: What A/V Sequence settings do I need to choose for a PAL 1920x1080 25fps output?
Background:
Till now I've done the editing in iMovie HD 5.0.2. My journey ends with a QT export to a HD-mov file (1920x1080@30fps) which I am not able to author in the same quality with iDVD 5.0.1.
Since I can not purchase DVD Studio Pro as a separate package, I have lavished myself with the full FCP box
Now having the most advance tools I feel somewhat swamped in the number of formats & options.
I want to use FCP as editor and DVDSP as authoring program.
My workflow goal is to do all the editing in HD and in the authoring fase create a HD master and as SD copy for non HD-DVD-player-owners.
Experiences so far:
1) iMovie HD can output a 1920x1080@30fps mov file. iDVD in PAL mode! converts this file to a NTSC image of 720x480 with an aspect ratio of 4:30. So much for all the creativity in iMovie HD.
2) Files created in FCP 5.1 using various 1080i50 Sequences all having the HDV 1080i50 Compressor, all give 4:3 results in iDVD
2a) Frame: 1920x1080
Aspect ratio: HDTV 1080i (16:9)
Pixel Aspect Ratio: Square
Compressor HDV 1080i50
QT display: correct width display
2b) Frame: 1440x1080
Aspect ratio: HD (1440x1080) (16:9)
Pixel Aspect Ratio: HD (1440x1080)
Compressor HDV 1080i50
QT display: picture strechted in width
2c) Frame: 1440x1080
Aspect ratio: HD (1440x1080) (16:9)
Pixel Aspect Ratio: Square
Compressor HDV 1080i50
QT display: picture narrowed in width
So what is the magic A/V sequence?
All hints and tips welcome
Regards
Coen
PowerMac G5 DP 2.0GHz Mac OS X (10.4.7) 1.5Gb memory, 23" WXGA screen, 460Gb storage

Patrick & Shane,
thanks for both your inputs.
Both, I believe, need to be told that your clip is 16:9 -
not sure how to do this in iDVD HD, but it's an
inspector checkbox in DVDSP...
Guess the common demeanor is that I can set my A/V settings to 1920x1080, but that I need to tell DVDSP that the source material is 16:9.
In iDDVD there is no such option ... but the funny thing is that my 16:9 output from iMovie HD did display in the correct aspect ratio in iDVD and my 16:9 output from FCP did produce a 4:3 aspect ratio in iDVD (ahum).
You might try the DVCPRO HD 1080i50 codec. Compressed
HD, but not too bad. And the drive requirements aren't
too high. Firewire 800 or internal SATA drive will do
you. As will a SATA Raid.
Not sure what difference it makes when using either HDV 1080i50 or DVCPRO HD 1080i50 codec ... when I do not intend to output back to tape.
In my case I believe (but correct me if I am wrong) the output codec is of lesser importance, since I want to author to HD DVD and HD DVD has its own specific coding specs.
Not many HD DVD players out there....and those are
EXPENSIVE...plus there are competing formats. How do you
intend to exhibit this DVD?
Initially I will exhibit my HD DVD on my G5. For "common folks" I will re-author in SD (unfortunately Hybrid red laser discs with both a HD and SD project are no longer supported).
I do believe HD DVD players will standardise and become more common ... so my original HD editing will not be in vain. Part of the fun is to use the FCP tools in a challenging (and rewarding) way.
What drives me: Last year my wife and I went on a holiday to Spitsbergen. That is half way between the North Pole and Norway. With a sailing boat we circumvented the archipello. I shot 15Gb of RAW images. The environment has left such an impression that I want to create a superb quality slideshow attesting to the uniqueness of the location. This asks for HD and nothing less.
And Yes, an HD DVD player will cost a lot, but so does a trip to Spitsbergen
Regards,
Coen
PowerMac G5 DP 2.0GHz Mac OS X (10.4.7) 1.5Gb memory, 23" WXGA screen, 460Gb storage

Importing Still Images - Stuck on one step

I've never imported a still image into FCP before but I'm following some Ken Stone articles on doing it but I'm stuck on one bit.
I've pasted in the directions below and its the third one, "paste in photgraphs". I've never used Photoshop (im using elements) and I just can't paste in the photo i want to use. The 'copy' and 'paste' options are greyed out so i really don't know how to progress. Any help would be apreciated.
1) From PhotoShop File menu > new.
2) Set Width to 720 pixels, Height to 540 Pixels, Resolution to 72 dpi, Color Mode to RGB, and Contents to White or choose a Background Color.
3) Create your artwork, set text, paste in photographs. When done with your art work Save this image and give it name like "Image Name 540".
4) File menu > Image > Image size
5) In the Image Size dialog box FIRST uncheck the 'Constrain Proportions' box.
6) In the Pixel Dimension section, top the dialog box, change your Height setting from 540 to 480. Leave the Width setting at 720.
7) Click Okay.
If you look at your image you see that it is now distorted, flatten down. Don't panic, this is the conversion process and when the square pixels get converted to rectangular pixels in NTSC your image will once again look correct.
8) Do a 'Save As', Photoshop format (.psd) and name the file "Image Name 480".
9) Import into FCP and render. You will see that your image on NTSC once again has it's proper proportions.

Not quite sure I follow you. You're having problems in Photoshop?
You must open the photo as a separate file in photoshop. Just find the image you want to use, control/right click on it and choose open with>photoshop.
When this image is open, you can click-hold-and-drag it across to your main image canvas.

Importing still images to Premiere Pro CS5

I have some still digital images in my computer which I want to use for a project for class.
The problem I find is that when I import the images they are too big and only a portion of shows.
Apparently the size of the image has to be 720 wide x 480 tall.
How do I resize it to that scale?
Please help.

Correction: I redid the whole thing as I was using the wrong image. But anyhow, this is the scenario.
My project requires images close to 720 wide x 480 tall. My image is 3264 x 2448
When I resized I couldn't use 720 width as the "constrain proportions" makes the height 540.
The latter being greater than the 480... so I have selected (with the right image now) 640 width and it automatically inserts a height of 480.
This is better than the previous dimensions with the wrong image so I guess I might be ok. What do you think?

Importing still images from the Finder?

Can you do this in iMovie '11, or do you have to go through the extra step of bringing the still images into iPhoto first? Images are in .JPG format. I could find no "images" option in iMovie's File menu > Import. I looked in iMovie help, but it oddly found no entries for "importing."

Hi
I do
- collect photos in a folder dedicated to the movie project (e.g. date and name + movie project)
- they are all in .jpg format (or converted to this) - NO .bmp etc as this give BAD result
From this folder I drag and drop my photos into my Movie project - I prefer to have it in a TimeLine like view (not wrapped with several lines of thumbnails)
Yours Bengt W

Importing still images

Similar Messages

Maybe you are looking for