Importing stops at every glitch in tape when using the ADVC300 to imprt vhs

When I import a analog video from VHS or an 8mm with the ADVC300 iMovie stops the import at every glitch in the tape, I am looking for a way to import an entire VHS from beginning to end. Is the a preference setting in iMovie 09 that I can change? Or maybe Final Cut Express?

I have exactly the same problem. I'm importing old VHS which has a lot of bad spots. I have the ADVC300 - default settings.
iMovie seems to be coded to stop importing whenever it sees a break in the tape. I guess for digital media that's a good assumption - but for ratty VHS it's a real problem.
iMovie does better than Quicktime 7 Pro - but neither work very well for this kind of import.
Any suggestions would be appreciated - if I find a solution in the meantime - I'll post it here.

Similar Messages

Significant delay when using the "tap to click" trackpad function

(I accidently post this in the wrong forum -- for the old MBP -- so this is a repost)
Hello everyone! I bought a 2.4 Ghz unibody MBP like 3 weeks ago. I had an issue and they replaced the computer with a new one at the store. Today is the first day of using the new laptop. They switched out the ram upgrade and the hard drive.
The issue seems to be that when using the tap to click function on the trackpad, there is a relatively significant delay (at least for a click). With the regular mouse button the delay isn't there. Such as if I'm clicking on the finder or the file tab, there's a bit of a delay before they pop up, compared to instantaniously with the mouse button. When using the trackpad for regular types of tasks, there is a bit of a delay sometimes too. Such as I'll be moving the mouse across the screen and it will stop.
Please help me out. If I could solve it without going back to the Apple store that would be great. Thanks everyone in advance.

Update: I think the 1/2 second delay is too long of an estimate, but the delay is significant enough to make me notice something has to be wrong. My previous MBP had no delay.
When moving the mouse around, I'm not sure if it's a MBP issue, but occasionally the mouse seems to "get stuck" on the screen and I have to begin moving my finger again on the trackpad. This happened on the first MBP too.

Safari crashes when using the dialog box to import/save files, in facebook under windows 7

I've encountered the following errors in some PCs, running Safari 5.1.7 in MS-Windows 7 Pro:
Safari crashes when using the dialog box to import/save files. One doesn't have to actually upload or download any file, the mere invocation of the relevant dialog box brings down all open Safari windows after a couple of seconds.
Errors displayed in the Event Log are:
Όνομα ελαττωματικής εφαρμογής Safari.exe, έκδοση 5.34.57.2, χρονική σήμανση 0x4f982b5e
Όνομα ελαττωματικής λειτουργικής μονάδας CoreGraphics.dll, έκδοση 1.87.0.0, χρονική σήμανση 0x4f9739a0
Κωδικός εξαίρεσης: 0x40000015
Μετατόπιση σφάλματος: 0x0013a762
Αναγνωριστικό ελαττωματικής διεργασίας: 0x17f4
Χρόνος έναρξης ελαττωματικής εφαρμογής: 0x01cded6b09576023
Διαδρομή ελαττωματικής εφαρμογής: C:\Program Files\Safari\Safari.exe
Διαδρομή ελλατωματικής λειτουργικής μονάδας:C:\Program Files\Safari\Apple Application Support\CoreGraphics.dll
Αναγνωριστικό αναφοράς:ebe64ac9-595e-11e2-a977-0016356671d1
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T06:45:00.000000000Z
EventRecordID
95609
Channel
Application
Computer
computername
Security
EventData
Safari.exe
5.34.57.2
4f982b5e
CoreGraphics.dll
1.87.0.0
4f9739a0
40000015
0013a762
17f4
01cded6b09576023
C:\Program Files\Safari\Safari.exe
C:\Program Files\Safari\Apple Application Support\CoreGraphics.dll
ebe64ac9-595e-11e2-a977-0016356671d1
and
Ελαττωματικός κάδος (bucket) 2970527469, τύπος 1
Όνομα συμβάντος: APPCRASH
Απόκριση: Δεν υπάρχει
Αναγνωριστικό Cab: 0
Υπογραφή προβλήματος:
P1: Safari.exe
P2: 5.34.57.2
P3: 4f982b5e
P4: CoreGraphics.dll
P5: 1.87.0.0
P6: 4f9739a0
P7: 40000015
P8: 0013a762
P9:
P10:
Συνημμένα αρχεία:
C:\Users\username\AppData\Local\Temp\WER51A.tmp.WERInternalMetadata.xml
Αυτά τα αρχεία μπορεί να είναι διαθέσιμα εδώ:
C:\Users\username\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Saf ari.exe_e273f639ef3d86d52c9d8e15dd2b42dce3e78061_1f86213d
Σύμβολο ανάλυσης:
Επανέλεγχος για λύση: 0
Αναγνωριστικό αναφοράς: ebe64ac9-595e-11e2-a977-0016356671d1
Κατάσταση αναφοράς: 0
+
System
Provider
[ Name]
Windows Error Reporting
EventID
1001
[ Qualifiers]
0
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T06:45:10.000000000Z
EventRecordID
95610
Channel
Application
Computer
computername
Security
EventData
2970527469
1
APPCRASH
Δεν υπάρχει
0
Safari.exe
5.34.57.2
4f982b5e
CoreGraphics.dll
1.87.0.0
4f9739a0
40000015
0013a762
C:\Users\username\AppData\Local\Temp\WER51A.tmp.WERInternalMetadata.xml
C:\Users\username\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Saf ari.exe_e273f639ef3d86d52c9d8e15dd2b42dce3e78061_1f86213d
0
ebe64ac9-595e-11e2-a977-0016356671d1
0
I have tried in-installing safari but it seems not to help. I have tried installing it to a third, newly installed pc and come to the same result.
All PCs are fully up-to-date as it regards Microsoft and Apple patches. Any ideas as to why this might happen?

Still having the same problem. Ever the optimist, I submit the following info.
Error window screenshot can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_01.JPG
Enent log entry can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_02.txt
Version info can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_03.JPG

HT5621 I have tried to changed my Apple ID and every time I try to use the new Apple ID it won't let me because when i try to update an app the old ID comes up to sign in. I deleted that account so it will not let me use my new one.

I have tried to changed my Apple ID and every time I try to use the new Apple ID it won't let me because when i try to update an app the old ID comes up to sign in. I deleted that account so it will not let me use my new one.

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple Id to another. Apple does not merge Apple IDs. You will never be able to access your content bought with another Apple ID with a new ID.

How do you stop needing to verify email password when using yahoo.att with Mac Mail

How do you stop needing to verify email password when using yahoo.att with Mac Mail?

Nevermind, I fixed it (I think). I went into Settings | Accounts & Sync and found Yahoo at the bottom of the list (alphabetically). I selected it and it had an optiion to delete the account, which I did.

My iphoto 09 keeps on downloading duplicates to a temp folder without asking when I drag a photo from firefox over to iphoto to import it. It does not happen when using safari. can some one please help?

My iphoto 09 keeps on downloading duplicates to a temp folder without asking when I drag a photo from firefox over to iphoto to import it. It does not happen when using safari. can some one please help?

You're in the wrong forum. Post to iPhoto for iLife, not iPhoto for iOS.

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have been noticing that when using the computer the mouse keeps going in places where I really do not want and just now select the sentence without I have done anything. Sometimes goes to places like bookmark or open tabs in website when I am reading a

I have been noticing that when using the computer the mouse keeps going in places where I really do not want and just now select the sentence without I have done anything. Sometimes goes to places like bookmark or open tabs in website when I am reading a page.
Also I have noticed opened windows that I have not opened.
I have verified the sharing folder and also the remote access but it not let me turn it off.
Also I have add a password to my computer and even using the same one it looks like is not working.
The I photo stopped working, Mac Mail does not let me add rules (this is from one day to the other)
The computer is mine, the internet I use is payed by me with a password. I did not give permission to anyone to use my computer or share my files.
In system preferences in the sharing folder is showing everyone and staff.
My computer is private I do not own a company and I do not have a network set up in my house.
I had my photos removed from my computer and even after trying to reinstall I photo and fix the Mac Mail is not working.
I am receiving emails saying that I have sent emails to people that I do not know and including in a time where I am working and not using the computer.
Any suggestions in how to fix this issue?
I really appreciate.

With the multitude of issues you have I would take it to an Apple store or AASP and have them sort it out. Then I would sign up for Apple camp or one on one.

Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
Sounds like you are a bit confused with version numbers.
Latest AirPort Utility version for the iPhone / iPad is 1.3.3. There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

How to add image in virtual dir / i/ 11g when using the embedded gateway

Hi,
Does somebody knows how to 'simple' import a file or directory
into the /images/ or /i/ directory created by APEX without tricks like in How I added a new image to APEX in 11g when using the embedded gateway.
when using Database 11g with the embedded gateway. with webdav of ftp.
When I use the url http://localhost/images
I need to logon.
There is not 1 username/password that I can use. I tried all.
When I try http://localhost/i/16admin.gif then the gif is shown.
I must be something with ACL's or DBMS_EPG or maybe the default port 80 that I use?
My configuration is
Doing 11.1.0.6.0 checks
############# Status/Version #############
XDB Status is: VALID at version 11.1.0.6.0
############# OTHER DATABASE FEATURES #############
Oracle Application Express is VALID at version 3.1.2.00.02
OWB is VALID at version 11.1.0.6.0
Oracle Enterprise Manager is VALID at version 11.1.0.6.0
Oracle Ultra Search is VALID at version 11.1.0.6.0
OLAP Catalog is VALID at version 11.1.0.6.0
Spatial is VALID at version 11.1.0.6.0
Oracle Multimedia is VALID at version 11.1.0.6.0
Oracle XML Database is VALID at version 11.1.0.6.0
Oracle Text is VALID at version 11.1.0.6.0
Oracle Expression Filter is VALID at version 11.1.0.6.0
Oracle Rules Manager is VALID at version 11.1.0.6.0
Oracle Workspace Manager is VALID at version 11.1.0.6.0
Oracle Database Catalog Views is VALID at version 11.1.0.6.0
Oracle Database Packages and Types is VALID at version 11.1.0.6.0
JServer JAVA Virtual Machine is VALID at version 11.1.0.6.0
Oracle XDK is VALID at version 11.1.0.6.0
Oracle Database Java Packages is VALID at version 11.1.0.6.0
OLAP Analytic Workspace is VALID at version 11.1.0.6.0
Oracle OLAP API is VALID at version 11.1.0.6.0
############# XDBCONFIG INFORMATION #############
acl-max-age= = = 15
acl-cache-size= = = 32
case-sensitive= = = true
call-timeout= = = 6000
max-link-queue= = = 65536
max-session-use= = = 100
persistent-sessions= = = false
default-lock-timeout= = = 3600
xdbcore-logfile-path= = = /sys/log/xdblog.xml
xdbcore-log-level= = = 0
resource-view-cache-size= = = 1048576
extension= = = au
mime-type= = = audio/basic
extension= = = avi
mime-type= = = video/x-msvideo
extension= = = bin
mime-type= = = application/octet-stream
extension= = = bmp
mime-type= = = image/bmp
extension= = = css
mime-type= = = text/css
extension= = = doc
mime-type= = = application/msword
extension= = = eml
mime-type= = = message/rfc822
extension= = = gif
mime-type= = = image/gif
extension= = = htm
mime-type= = = text/html
extension= = = html
mime-type= = = text/html
extension= = = jpe
mime-type= = = image/jpeg
extension= = = jpeg
mime-type= = = image/jpeg
extension= = = jpg
mime-type= = = image/jpeg
extension= = = js
mime-type= = = application/x-javascript
extension= = = jsp
mime-type= = = text/html
extension= = = mid
mime-type= = = audio/mid
extension= = = mov
mime-type= = = video/quicktime
extension= = = movie
mime-type= = = video/x-sgi-movie
extension= = = mp3
mime-type= = = audio/mpeg
extension= = = mpe
mime-type= = = video/mpg
extension= = = mpeg
mime-type= = = video/mpg
extension= = = mpg
mime-type= = = video/mpg
extension= = = msa
mime-type= = = application/x-msaccess
extension= = = msw
mime-type= = = application/x-msworks-wp
extension= = = pcx
mime-type= = = application/x-pc-paintbrush
extension= = = pdf
mime-type= = = application/pdf
extension= = = png
mime-type= = = image/png
extension= = = ppt
mime-type= = = application/vnd.ms-powerpoint
extension= = = ps
mime-type= = = application/postscript
extension= = = qt
mime-type= = = video/quicktime
extension= = = ra
mime-type= = = audio/x-realaudio
extension= = = ram
mime-type= = = audio/x-realaudio
extension= = = rm
mime-type= = = audio/x-realaudio
extension= = = rtf
mime-type= = = application/rtf
extension= = = rv
mime-type= = = video/x-realvideo
extension= = = sgml
mime-type= = = text/sgml
extension= = = svg
mime-type= = = image/svg+xml
extension= = = tif
mime-type= = = image/tiff
extension= = = tiff
mime-type= = = image/tiff
extension= = = txt
mime-type= = = text/plain
extension= = = url
mime-type= = = text/plain
extension= = = vrml
mime-type= = = x-world/x-vrml
extension= = = wav
mime-type= = = audio/wav
extension= = = wpd
mime-type= = = application/wordperfect5.1
extension= = = xls
mime-type= = = application/vnd.ms-excel
extension= = = xml
mime-type= = = text/xml
extension= = = xsd
mime-type= = = text/xml
extension= = = xsl
mime-type= = = text/xml
extension= = = zip
mime-type= = = application/x-zip-compressed
extension= = = htc
mime-type= = = text/x-component
extension= = = xbl
mime-type= = = text/xml
extension= = = en
lang= = = english
extension= = = gzip
encoding= = = zip file
extension= = = tar
encoding= = = tar file
session-pool-size= = = 50
session-timeout= = = 6000
ftp-port= = = 0
ftp-listener= = = local_listener
ftp-protocol= = = tcp
logfile-path= = = /sys/log/ftplog.xml
log-level= = = 0
session-timeout= = = 6000
buffer-size= = = 8192
http-port= = = 80
http-listener= = = local_listener
http-protocol= = = tcp
max-http-headers= = = 64
max-header-size= = = 16384
max-request-body= = = 2000000000
session-timeout= = = 6000
server-name= = = XDB HTTP Server
logfile-path= = = /sys/log/httplog.xml
log-level= = = 0
servlet-realm= = = Basic realm="XDB"
welcome-file= = = index.html
welcome-file= = = index.htm
servlet-pattern= = = /Test
servlet-name= = = TestServlet
servlet-pattern= = = /oradb/*
servlet-name= = = DBURIServlet
servlet-pattern= = = /orarep/*
servlet-name= = = ReportFmwkServlet
servlet-pattern= = = /i/*
servlet-name= = = PublishedContentServlet
servlet-pattern= = = /apex/*
servlet-name= = = APEX
servlet-pattern= = = /images/*
servlet-name= = = IMAGES
servlet-name= = = TestServlet
servlet-language= = = Java
display-name= = = XDB Test Servlet
description= = = A servlet to test the internals of the XDB Servlet API
servlet-class= = = xdbtserv
servlet-schema= = = xdb
servlet-name= = = DBURIServlet
servlet-language= = = C
display-name= = = DBURI
description= = = Servlet for accessing DBURIs
role-name= = = authenticatedUser
role-link= = = authenticatedUser
servlet-name= = = ReportFmwkServlet
servlet-language= = = C
display-name= = = REPT
description= = = Servlet for accessing reports
role-name= = = authenticatedUser
role-link= = = authenticatedUser
servlet-name= = = PublishedContentServlet
servlet-language= = = C
display-name= = = Unauthenticated File Access Servlet
description= = = Servlet for files for unauthenticated users
param-name= = = RootFolder
param-value= = = /images
description= = = RootFolder
role-name= = = anonymousServletRole
role-link= = = anonymousServletRole
servlet-name= = = APEX
servlet-language= = = PL/SQL
display-name= = = APEX
database-username= = = ANONYMOUS
default-page= = = apex
document-table-name= = = wwv_flow_file_objects$
document-path= = = docs
document-procedure= = = wwv_flow_file_mgr.process_download
nls-language= = = american_america.al32utf8
request-validation-function= = = wwv_flow_epg_include_modules.authorize
role-name= = = anonymousServletRole
role-link= = = anonymousServletRole
servlet-name= = = IMAGES
servlet-language= = = PL/SQL
display-name= = = IMAGES
database-username= = = APS
role-name= = = anonymousServletRole
role-link= = = anonymousServletRole
allow-mechanism= = = basic
nonce-timeout= = = 300
xdbcore-xobmem-bound= = = 1024
xdbcore-loadableunit-size= = = 16
acl-evaluation-method= = = ace-order
############# XMLTYPE Tables #############
XDB has 1 XMLTYPE TABLES stored as CLOB
XDB has 24 XMLTYPE TABLES stored as OBJECT-RELATIONAL
XDB has 11 XMLTYPE TABLES stored as BINARY
############# XMLTYPE Columns #############
XDB has 3 XMLTYPE Columns stored as CLOB
MDSYS has 24 XMLTYPE Columns stored as CLOB
SYS has 1 XMLTYPE Columns stored as CLOB
ORDSYS has 9 XMLTYPE Columns stored as CLOB
############# XMLTYPE Views #############
############# XMLTYPE INDEXES #############
XDB has 1 XMLTYPE Indexes of type CSX
############# Items built with XML API's #############
PACKAGE BODY FLOWS_030100.WWV_FLOW_XLIFF
PACKAGE BODY FLOWS_030000.WWV_FLOW_XLIFF
PACKAGE BODY MDSYS.SDO_WFS_PROCESS
PACKAGE BODY EXFSYS.DBMS_RLMGR_DR
PACKAGE BODY FLOWS_030100.WWV_FLOW_DATALOAD_XML
PACKAGE BODY MDSYS.SDO_OLS
PACKAGE BODY FLOWS_030000.WWV_FLOW_DATALOAD_XML
PACKAGE BODY FLOWS_030100.WWV_FLOW_XLIFF
PACKAGE BODY FLOWS_030000.WWV_FLOW_XLIFF
PACKAGE BODY EXFSYS.DBMS_RLMGR_DR
PACKAGE BODY XDB.DBMS_XSLPROCESSOR
PACKAGE BODY XDB.DBMS_XMLPARSER
PACKAGE BODY FLOWS_030100.WWV_FLOW_XLIFF
PACKAGE BODY XDB.DBMS_CSX_INT
PACKAGE BODY FLOWS_030000.WWV_FLOW_XLIFF
PACKAGE BODY EXFSYS.DBMS_RLMGR_DR
PACKAGE BODY XDB.DBMS_XDB
PACKAGE BODY XDB.DBMS_XDBRESOURCE
PACKAGE BODY XDB.DBMS_XMLDOM
PACKAGE XDB.DBMS_XSLPROCESSOR
PACKAGE XDB.DBMS_XMLPARSER
PACKAGE XDB.DBMS_XDBRESOURCE
PACKAGE BODY XDB.DBMS_XMLDOM
PACKAGE BODY XDB.DBMS_XMLINDEX
PACKAGE BODY XDB.DBMS_XMLPARSER
PACKAGE BODY XDB.DBMS_XMLPARSER
PACKAGE BODY XDB.DBMS_XMLSCHEMA
PACKAGE BODY XDB.DBMS_XMLSCHEMA
PACKAGE BODY XDB.DBMS_XMLSCHEMA_INT
PACKAGE BODY XDB.DBMS_XMLTRANSLATIONS
PACKAGE BODY XDB.DBMS_XSLPROCESSOR
PACKAGE BODY XDB.DBMS_XMLPARSER
PACKAGE BODY XDB.DBMS_CSX_INT
PACKAGE BODY XDB.DBMS_XMLDOM
PACKAGE BODY XDB.DBMS_XSLPROCESSOR
############# XML SCHEMAS #############
MDSYS has 4 registered.
EXFSYS has 2 registered.
ORDSYS has 17 registered.
XDB has 25 registered.
SYS has 43 registered.
############# Repository Resources #############
MDSYS has 9 resources.
EXFSYS has 3 resources.
ORDSYS has 20 resources.
XDB has 28 resources.
SYS has 12634 resources.
############# Network ACLs Configured #############
mail.4aps.be has network acls configured for ports 25 through 25
* has network acls configured for ports through
* has network acls configured for ports through
############# DBMS_EPG DAD USAGE #############
APEX
IMAGES

Hi Jules,
You need a user with XDBADMIN rights to access the WebDav. Once you have access, you can open the URL as webfolder (in IE).
Regards,
Christian

After updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid

after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm

Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

Shutter locks when using the camera in AV mode.

EOS Rebel T3i - Shutter locks when using the camera in AV mode. It actually freezes up when in this mode...no it's not just allowing more light in through the shutter but rather locking in the open position. How can I resolve this? Thank you.

Does it do this in bright sunlight at the lowest f/number?
How do you know the shutter is locked open?
Does it do this on multiple lenses?
How long does the phenomenon last, and how do you stop it?
Do you end up with an image? Is it totally overexposed and motion blurred?
Positive it is not mirror lockup?
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

Does anyone find that the new iPad Air sounds sort of "hollow" when using the pad?

Maybe I don't know what I am talking about, but I feel like when using the iPad Air, it seems a bit hollow when using the screen pad or basically just using it in general. My last iPad (the latest one before the Air) seemed like it was more quality. Does that make sense?

Yes it does have a slightly hollow sound when you tap the screen. This is because the screen is made a bit differently than the older ones...there's a gap between the layers in the screen, which causes the sound you're hearing...it's completely normal on the Air. I took my Air back tho! It's awesome but just a bit big for my taste. I'm hoping the Mini comes soon!
And I don't know why Kappy is saying the speakers can't do the low frequency so well. The speakers on the Air produce a way better sound than earlier gens..including low frequencies.
cheers

Importing stops at every glitch in tape when using the ADVC300 to imprt vhs

Similar Messages

Maybe you are looking for