Importing stops before complete

I'm new to iTunes and have been trying to import tracks from a CD that is made up of individual tracks downloaded from the internet some time ago. The CD has 18 tracks and only the first 10 will import. On the 11th, I can hear the CD player "surging" and the track shows that it is partly imported but will not complete.
Tried skipping the 11th track but same thing happens to 12th, 13th etc.
What's happening??
P.S. I have had no trouble importing all tracks on any any purchased CD.

Home burnt CDs, especially ones made "some time ago," are more prone to problems than commercial CDs.
If you still have the original tracks in MP3 format, copy them to the new computer (using a USB flash drive or other medium) and add them to the iTunes library directly.
If the only source you have is the audio CD, try ripping again in iTunes with the "error correction" preference turned on, and if that doesn't work, try ripping in another program, such as Windows Media Player or Exact Audio Copy, and adding the resulting MP3s to the iTunes library.

Similar Messages

Backup stopped before completing. The process cannot access the file because it is being used by another process

I am working with a client who is attempting to backup to a NAS device
The device is a linksys NSS6000 (Cisco device).
It’s a dual 1Gbit LAN device that supports CIFS / FTP and NFS transfers. It has only 1Gbit lan connected.
The device has 4 * 500 gb sata drives in raid 1 attached.
Cables go from cat 5 to fiber back to cat5. (The NAS is located at a neighboring office) The switches are 1gbit.
Server is a win2k8r1 fully up to date.
When backing up to the NAS device, the following error occurs:
Running backup of volume Local Disk(D:), copied (86%).
Running backup of volume Local Disk(D:), copied (90%).
Running backup of volume Local Disk(D:), copied (94%).
Running backup of volume Local Disk(D:), copied (98%).
Backup of volume Local Disk(D:) completed successfully.
Backup stopped before completing.
Summary of backup:
Backup stopped before completing.
The process cannot access the file because it is being used by another process.
If we redirect the backup to a folder on a 2008 share, the backup completes successfully.
Only when backing up to the linksys NSS6000 does the error occur.
No other backup processes are writing to the NAS device so I can't understand why the process thinks the file is
being used by another process.
One thing we did notice that when the backup to the NAS device occurs, throughput is about 150 mbit average
On the 2008 server shares we successfully backup to, the through put is 500 mbit. Not sure if that is important, but
might be worth mentioning.
The following event log entry was noted at the end of the backup.
The description for Event ID '519' in Source 'Microsoft-Windows-Backup' cannot be found.
The local computer may not have the necessary registry information or message DLL files to display the message,
or you may not have permission to access them. The following information is part of the
event:'2009-05-12T10:13:31.617Z', '', '2147942432', '%%2147942432'
Any ideas?
Thanks..Michael

I am also seeing the same problem backing up nightly to a brand new NAS device (WD My Book Live)
All the error codes are the same as those in this thread.
From Windows Event Viewer:
The backup operation that started at '‎2011‎-‎03‎-‎25T06:00:19.811302700Z' has failed with following error code '2147942432' (The process cannot access the file because it is being used by another process.). Please review the event details
for a solution, and then rerun the backup operation once the issue is resolved.
Fault bucket 659897467, type 5
Event Name: WindowsBackupFailure
Response: Not available
Cab Id: 0
Problem signature:
P1: Backup
P2: 6.1.7600
P3: 0x80070020
P4: 7
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Windows\Logs\WindowsBackup\WindowsBackup.1.etl
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Analysis symbol:
Rechecking for solution: 0
Report Id: dd480bf2-56a6-11e0-ae81-00217099bf56
Report Status: 0
From Report.wer in C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Version=1
EventType=WindowsBackupFailure
EventTime=129455071508181139
Consent=1
UploadTime=129455071508201140
ReportIdentifier=dd480bf2-56a6-11e0-ae81-00217099bf56
Response.BucketId=659897467
Response.BucketTable=5
Response.type=4
Sig[0].Name=Operation
Sig[0].Value=Backup
Sig[1].Name=AppVer
Sig[1].Value=6.1.7600
Sig[2].Name=HRESULT
Sig[2].Value=0x80070020
Sig[3].Name=TargetType
Sig[3].Value=7
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7600.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
State[0].Key=Transport.DoneStage1
State[0].Value=1
State[1].Key=DataRequest
State[1].Value=Bucket=659897467/nBucketTable=5/nResponse=1/n
FriendlyEventName=WindowsBackupFailure
ConsentKey=WindowsBackupFailure
AppName=Windows host process (Rundll32)
AppPath=C:\Windows\System32\rundll32.exe
ReportDescription=Windows Backup failure

TS1538 download of restore/recovery stops before completion,saying it is password protected

Forgot password and wanted to do a recovery. I followed the recommended steps but download of restore/recovery stops before completion,saying it is password protected.

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

All most downloaded but stops before complete, with wiindows error 206

all most down loaded, but stops before complete windows error 206

Stewart
This forum is for questions regarding the LabVIEW Datalogging and Supervisory Control Module. You will have more luck posting this question in the general LabVIEW forum.
Good luck

TS1702 I am updating my IPAD to version 5.1 and the update has stopped before completion. What is the procedure. If I stop the update or restart the IPAD will the update be corrupted and also the IPAD operating system.

I am updating a new IPAD to the latest version from ITUNES. The update is not complete and has stopped. What is the procedure to restart? If I close ITUNES i get a message that the IPAD is updating. Will closing the application cause the update to be corrupted and thus the operating system? Will the same occur if I power the IPAD down or disconnect it vis the USB port?
Help!!!

routnom wrote:
AppleWill - when i closed the app and restarted Itunes, I had to go thru a Restore process. The restore goes to certain point and stops. It seems at the same time as the Update stopped. I can Force a stop and reboot the computer and try again. It possible the screensaver interrupted the restore? It doesn't sound right. Any suggestions?
You may also want to go to:
~/Library/iTunes/
This is done by going to the "Go" in the Finder and select Go To Folder. Copy and paste:
~/Library/iTunes/
In to Go To Folder selection. Look for a folder called iPad Software Updates. Delete anything in that folder and re download the upadate.

DVD Playback stops before completion of slidshow

Please help -- for some reason -- the playback of my slideshow (about 20 min) stops about half way thru the playback. I've had this happen before and have no idea.
Anyone have the answer?
Thanks

If you created your slideshow in iDVD, you are limited to 99 slides. Your slideshow is probably stopping on the 99th slide. If that is the case, you need either to do your slide show in iPhoto or in iMovie, where there is no limitation on the number of slides, and then export them into iDVD.

I am downloading new itunes onto iphone 4 and it stopped before completion and now there is a usb and itunes picture on screen and is frozen

any help on getting the frozen screen off?

Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

Download stopped before completion

incomplete download. help.

Incomplete download of what?
If help is desired, provide some details of the issue occurring.

Dv import rewinds before end of tape

Everything imports fine and iMovie creates new clips for each day based on time stamp, but the import stops before the end of the tape - pretty sure its because of time code "breaks" (where the camera was fast forwarded past the end of a time code stamped / recorded region before shooting was resumed).
Is there any way to "force" iMovie to import until the physical end of tape is reached?

OK - update, with surprising result.
Setting to manual, clicking import made the capture go to end of tape, even getting past time code blanks; AND the clips were broken up by day. So it looks to like the only thing different between manual and auto is that auto rewinds to start and rewinds when end is detected, manual doesn't. Very strange.
Sidenote - to tell how long a bunch of events are in aggregate, you can select the events (shift-click for multiple), click on blank area in the clip library viewer, command-a to select all clips and drag into project window. Total time of all the clips will be under the window. Then just delee the clips from the project window..

Hp j4680 all-in-one printer stops before printing is completed

Ever since windows 8.1 downloaded to my computer I've lost my scanner and have problems printing. It stops before printing is completed and now it won't print at all. I've tried going to H.P. to help but it now says that no printer is found. What can I do?

Hi,
First follow this tool by selecting fix printing:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-141412-1&cc=us&dlc=en&lc=en...
Be sure to clarify how the printer is connected to your PC, what HP software has been installed and what security program have been installed.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Photoshop Elements 13 stopped downloading to my OS 10.9.5 before completion. How do I get it to finish?

Photoshop Elements 13 stopped downloading to my OS 10.9.5 before completion. How do I get it to finish?

I called Apple tech support. The device turns out to be a WiFi extender. I never would have guessed that the extender would show up on the list since I wouldn't think of it as an airplay device, and in the list, it shows a little speaker icon. In the process of talking with Apple, I gained a greater understanding of how airplay works.
It turns out that there is no stored list of devices in a file on the mac, or anywhere else. I have seen a lot of traffic on the web from people trying to modify this list, but there isn't one. iTunes, and other devices simply poll the network for airplay devices from time to time.
Have a very happy holiday!
I would like to get rid of "just give me the aster, and stop wasting my time", and replace it with my name. The Apple tech support guy never saw that before. Just my luck.

Whenever i download files, many times it stops before downloading completely and i have to restart the process by visiting the site.

Whenever i download files, many times it stops before downloading completely and i have to restart the process by visiting the site. Suppose the file is 20 mbs, but it downloads only 2-3 mbs, reports that download is complete, but its just a part of that.

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
* http://kb.mozillazine.org/Unable_to_save_or_download_files

Itunes and Ipod Classic stop before song ends after transfer to new computer

I purchased a new Windows 7 computer and transferred my library from my XP computer.
I restored my library and all seemed well with the world.
I synched my IPod classic 120GB with over 8000 songs.
I was listening to the IPOD on my docking station when I started noticing that songs would just stop before the end of the song.
I thought my 120GB Ipod was dying, so I purchased a new 160GB.
The problem continued.
I then listened to them on the new computer in Itunes and they did not completely stop, they just skipped to the next track at the same place as it froze on my IPOD.
I listened to the same song on my old computer through Itunes and it played correctly.
I have do not have the Itunes Match and the songs that I currently know that have the problem were purchased on Itunes.
Any suggestions as how to resolve the issue?

I would try copying over the tracks from your XP computer again as the files from the first transfer may be corrupted.
B-rock

Scheduling of Concurrent Program stops after completed successful.

Hi
I need to create a check or procedure to create a alarm, which helps in checking the scheduling of all those concurrent programs whose scheduling has been stopped after completing successful. There has been lot of occurrences in our environment that led to programs not running for next run.
Aviral

If you have a trace, then just post the tkprof output here (put the tag before and after it).
Hopefully you've traced the session with WAIT EVENTS, so we can see where much time is being spent.
If not, I suggest you first trace the session again with WAIT EVENTS.

Song stops before finishing playing in ITunes and skips to next song

I'm using ITunes on a Windows Vista 64-bit system. Occasionally, when a song is playing, it will stop before it finishes and skip to the next song. It seems to only happen with certain songs though. Very strange. Didn't happen in the past. Is it a bug in Itunes? Any ideas??

This is really getting annoying. I'm on the verge of giving up on iTunes, or at least giving up on iTunes 8. The first rule of business is to make it easy for your customers to give you money. iTunes Store is a classic example of that. The second rule of business is not to p*ss off your customers. Looks like Apple is falling down on this one.
New information since my last rant. I have another computer running iTunes 7.6.0.29. Songs that do not play to completion on iTunes 8, play just fine on this older version of iTunes.
Worse, this problem has infected my wife's iPod. Songs that iTunes 8 does not finish playing also do not finish playing on my wife's iPod Classic (Model MB029LL, Version 1.1.2 PC). The same bug appears to be in newer iPod software.
I have an old 20GB iPod Click Wheel (Version 3.1.1). The same song that fails to play properly on iTunes and the iPod Classic plays just fine on my iPod Click Wheel.
This problem (at least my problem) is obviously a regression. Apple please fix it!

Importing stops before complete

Similar Messages

Maybe you are looking for