Importing SUN Explorer to OPS Center
Dears ..
I need to do a preventive maintenance for some of our customer , instead of manually looking into SRAS And Explominer o/p "As it takes time concluding report from both utilities plus they are
in-efficent to report" , can i use OPS Center to import captured explorers and analyze it ..
If so , does it cover all below items:
- H.W. faults .
- Major errors from logs for O.S. cluster , Mis-configuration
- Performance and resources utilization .
- Missing Critical patches/Withdrawn patches .
Hi user12131976,
for passowrd and security questions please read the "Oracle® Enterprise Manager Ops Center Security Guide 12c Release 2 (12.2.0.0.0)" with attention at Section "1.1.7 -Authentication Between the Proxy Controller and Agents". Please read the "Security Features" and evaluate to create a "3.2.1.1 Using SSH Key-Based Authentication" process.
HTH
Michele V.
If you want, mark the reply as “Helpful Answer“ or “Correct Answer”. By marking replies correct or helpful, you make it easier for community members to find replies that might help them in a similar situation.
Similar Messages
-
Configuration issue with OPS Center installation on OEL 5 update 5
Hi,
I have installed OPS Center 11g on an OEL 5 update 5. All prereqs, i think, is met and installation gives no warnings or errors.
When I try to access the web page to run the configuration wizard. It hangs with the "LOADING" message, after logon. And nothing more happens.
In the bottom left corner of the browser i have the DONE message. But an error behind.
Detaljer om feil på webside
Brukeragent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; InfoPath.3)
Tidsstempel: Wed, 12 Oct 2011 10:17:24 UTC
Melding: Could not load 'dojo.nls.xvmdojo_nb-no'; last tried './nls/xvmdojo_nb-no.js'
Linje: 53
Tegn: 27
Kode: 0
URI: https://%server%:9443/emoc/js/dojorelease/dojo/dojo.js
Melding: 'xvm.resourceBundle.jobManager' er null eller ikke et objekt
Linje: 406
Tegn: 40
Kode: 0
URI: https://%server%:9443/emoc/js/dojorelease/dojo/xvmdojo.js?11.1.0.1536
I have removed the servername from the error.
How can i solve this? I saw no dojotoolkit installation as an prereq.
rgds, Kai
Edited by: user465755 on Oct 12, 2011 3:27 AMHello Kai,
I am not sure to completely understand your logs since they don't seem to be written in English but
could it be that you are using Firefox 4.0 ? ( only firefox 2 and 3 and IE 7 and 8 are supported ).
Also, do you have enough free RAM ( 1-2 GB ) on the browser's machine ?
Lastly, you can check the prerequisites with
/var/opt/sun/xvm/OCDoctor/OCDoctor.sh ec-prereq force
/var/opt/sun/xvm/OCDoctor/OCDoctor.sh --troubleshoot
Cheers
Jocelyn -
Provisioning Solaris 11 with Ops Center
The current release of Ops Center 11g does not support provisioning of Solaris 11 (Express).
Is it planned that future releases of Ops Center support the provisioning of Solaris 11 ?
SvenHello Kai,
I am not sure to completely understand your logs since they don't seem to be written in English but
could it be that you are using Firefox 4.0 ? ( only firefox 2 and 3 and IE 7 and 8 are supported ).
Also, do you have enough free RAM ( 1-2 GB ) on the browser's machine ?
Lastly, you can check the prerequisites with
/var/opt/sun/xvm/OCDoctor/OCDoctor.sh ec-prereq force
/var/opt/sun/xvm/OCDoctor/OCDoctor.sh --troubleshoot
Cheers
Jocelyn -
404 browser error after installing Ops Center 12.1.1.2076
I have created a Solaris 10 x86 server and installed Ops Center 12.1.1.2076 fine on it. The embedded db is up and running and the ecadm service is starting fine. However when I go to a browser window to open the console page (https://opscenterserver:9443) it opens with a message http status 404 The requested resource () is not available. Oracle GlassFish Server 3.1.1.2.
I have ran OCDoctor --troubleshoot and get the following...
Ops Center Doctor 4.11 [OC 12.1.1.2076,SunOS10] [Read only] [19-Oct-2012 08:20AM BST]
======================== Checking Enterprise Controller... ==============================
OK: Total number of agents: 0
OK: Number of agents with inventories: 0
OK: Enterprise Controller requirements are met
OK: Files in /var/opt/sun/xvm/images/agent/ have the right permissions
OK: Files in /var/opt/sun/xvm/osp/web/pub/pkgs/ have the right permissions
OK: Found only 58 files in oracle/admin/OCDB/adump folder
OK: auth.cgi returns XML
OK: User 'oracleoc' home folder points to the right location
OK: User 'allstart' home folder points to the right location
OK: Apache logs are smaller than 2 GB
OK: n1gc folder has the right permissions
ec/12/check_sat_integrity_agent_link.sh: line 1: ../../agent/12/check_agent_integrity.sh: No such file or directory
OK: All Enterprise Controller packages are installed properly
OK: Enterprise Controller status is online
OK: the version is the latest one (12.1.1.2076)
OK: satadm timeouts were increased
OK: tar command was properly adjusted in satadm
OK: no 'conn_properties_file_name' value in .uce.rc
OK: Found the server .uce.rc
OK: Server .uce.rc has the correct file permissions
OK: Server .uce.rc has the correct ownership
ERROR: Could not access the KB public servers
Check the username and password and proxy configuration in "Administration" ->
"Edit Authentications" and "Change HTTP proxy"
Also, you may try the following command to test connectivity:
/var/opt/sun/xvm/OCDoctor/OCDoctor.sh --check-connectivity
OK: Grouplock file doesn't exist
OK: uce-server .uce.rc file points to a proper JAVA
OK: Disconnected mode is not configured
WARNING: Locales are set to "en_GB.ISO8859-1". This may cause issues when upgrading. Make sure you run:
# export LC_ALL=C
# export LANG=C
You can verify the settings by running:
# locale
OK: Found only one Solaris 11 agent bundle
OK: No partially installed packages
OK: 'public' folder has the right ownership
OK: 'public' folder is writable for uce-sds
OK: 'private' folder has the right ownership
OK: 'private' folder is writable for uce-sds
OK: No old jobs rerun (CR 6990675)
OK: No NCP encryption is used
OK: prtdiag doesn't hang
OK: This is not a T3 machine (if it was then a workaround may be needed)
OK: User uce-sds is part of all the proper groups
OK: 'update-saved-state' folder exists and has the right permissions
OK: No credential issues found
=========== Proxy controller is installed but not configured, skipping ==================
=========== Agent controller is installed but not configured, skipping ==================
Any ideas please?Try "http://opscenterserver" not "https" it will automatically redirect to htpps as below..
https://opscenterserver:9443/emoc/
帖子经 hgnan编辑过 -
How to receive notifications from Enterprise Manager Ops Center 12c
Hi:
- I have a question.
Previous versions of Ops Center could forward notifications via JMX to users using:
OBJECT_NAME = "com.sun.xvm.services:type=NotificationService"
OPERATION_NAME = "getGeneratedNotificationsForUser”
assuming that at least one user is configured to receive the notification.
- I pointed jconsole against Ops Center 12c, but when I invoked the getGeneratedNotificationsForUser method,
Ops Center 12c did not forward any notifications.
- Has anyone else encountered this?
- Is this an Ops Center configuration issue?
- Is there another operation and object that can retrieve notifications ?
Edited by: 915352 on Feb 17, 2012 1:20 PM
Edited by: 915352 on Feb 17, 2012 3:55 PM
Edited by: 915352 on Feb 17, 2012 3:55 PMSorry, my morning coffe didnt kick in yet. Nevertheless if it will be available its gonna by on eDelivery most likely.
Edited by: Tommy.B on 2012-02-20 03:24 -
Add existing OVM servers to Ops Center 11g?
We are turning an Ops Center 11g pilot project into production and we need help with our existing OVM Server for SPARC servers. We have a number of OVM 2.2 servers. When we discover them we don't see the VM asset showing in the "All Assets" list. Is there a way to discover the "Oracle VM Server for SPARC" asset that we can then add to virtual pools?
Thanks,Try this......
Also it shouldn't allow you to add such servers in an OVM Server for SPARC Server Pool.
Here a filter is missing in Ops Center: such servers shouldn't be proposed in the list of assets that can be added to a Server Pool, instead of allowing you to try it and then see an error that can't be understood.
To have a setup with servers that you will be able to add to Server Pools, and on which you will be able to create logical domains from Ops Center, you can either install these servers from Ops Center following the documentation at :
http://docs.oracle.com/cd/E27363_01/doc.121/e27511/ftr_ovm_sparc_mgmt.htm#autoId11 "Installation of Oracle VM Server for SPARC"
or you can install manually the LDoms Virtualization Controller agent on an already installed server.
I think this is not documented for LDoms, the current documentation at http://docs.oracle.com/cd/E27363_01/doc.121/e27511/asset_mgmt.htm#autoId13 "Installing Agent Controllers From the Command Line" will install a Zone Virtualization Controller Agent.
You should first uninstall the current Zone Virtualization Controller agent on your servers, running from the control domain :
$ /var/scn/install/uninstall
then I didn't do it yet manually on S11, I think it should be done as below if someone can confirm or provide the right procedure on S11. Otherwise I'm installing a s11 setup (with an MSR to sync that will take time) and could confirm tomorrow this manual procedure.
It should be similar as in http://docs.oracle.com/cd/E27363_01/doc.121/e27511/asset_mgmt.htm#autoId13
except that the zip to download at step 4 it the IPS zip : OpsCenterAgent.SolarisIPS*.zip
then at step 7, you have to run "install -l -p <proxy IP address>" instead of "install -a"
This step will expect that the S11 version configured on this server matches the version in the MSR you defined in Ops Center.
and at step 10, before running the "agentadm configure..." command, you need to create a file providing network settings :
create a file /opt/sun/n1gc/lib/virtualController.properties with the following content that you should adpat to your host (here for example on my host smt4-24, with IP address 10.166.88.53)
xvmserver.appliancename=smt4-24
network.interface=net0
network.ipaddress=10.166.88.53
network.subnetmask=255.255.255.0
network.defaultgateway=10.166.88.1
then proceed to the agentadm configure command as described at step 10.
After this command has finished, you should have in Ops Center an OVM for SPARC with ldoms management capabilities, allowing you to add this asset to a Server Pool and create logical domains -
hello, for OEM OC i found this document http://docs.oracle.com/cd/E27363_01/doc.121/e27340.pdf for tuning monitoring rules. On page 5 the author is mentioning a SDK for ops center, which should be on the EC server e.g. SUNWxvmoc-sdk.pkg, but i can not find this file on my ec. does anybody know where to find/download this package? Peter
Hi 2708924,
I assume your EC is on Solaris Environment and any command is executed by root (or root role).
Try to move in "/var/opt/sun/xvm/update-saved-state" :
For example on my EC
root@myEC # ls -la /var/opt/sun/xvm/update-saved-state
total 25
drwxr-xr-x 7 root root 7 Mar 31 19:24 .
drwxr-xr-x 30 root sys 60 Jul 26 04:00 ..
drwxr-xr-x 10 root sys 13 Dec 19 2012 update_EC_minor_bundle_12.1.2.2161
drwxr-xr-x 10 root sys 14 Jun 12 2013 update_EC_minor_bundle_12.1.3.2305
drwxr-xr-x 10 root sys 14 Nov 29 2013 update_EC_minor_bundle_12.1.4.2319
drwxr-xr-x 12 root sys 16 Mar 31 19:51 update_EC_minor_bundle_12.2.0.2663
drwxr-xr-x 8 root root 10 Dec 17 2012 update_satellite_bundle_12.1.1.2076
root@myEC #
Move to latest installed distribution bundle packeges version path:
For example on my installation:
root@myEC # cd /var/opt/sun/xvm/update-saved-state/update_EC_minor_bundle_12.2.0.2663/distribution/xvmoc_update_bundle/packages
root@myEC # pwd
/var/opt/sun/xvm/update-saved-state/update_EC_minor_bundle_12.2.0.2663/distribution/xvmoc_update_bundle/packages
root@myEC # ls -lah SUNWxvmoc-sdk.pkg
-rw-r--r-- 1 root sys 117M Mar 31 19:51 SUNWxvmoc-sdk.pkg
root@myEC #
If you don't find can try executed "find /var/opt/sun/xvm -name SUNWxvmoc-sdk.pkg -print". Go to step 2 at document http://docs.oracle.com/cd/E27363_01/doc.121/e27340.pdf
HTH
Michele V.
If you want, mark the reply as “Helpful Answer“ or “Correct Answer”. By marking replies correct or helpful, you make it easier for community members to find replies that might help them in a similar situation" -
Ops Center 12c Java API - Any tutorials?
I'm trying to figure out how to extract alert information from the Ops Center server, using the Java API. I have the API package installed, but other than the javadocs, I don't see any information on how to use it.
I found this, but the examples it gives aren't useful to me.
http://docs.oracle.com/cd/E26854_01/doc.121/e27511/apx_api.htm
Any pointers would be greatly appreciated!... After some troubleshoot steps, we detected that the both OVM Managers has the same UUID (install 1rt OVM Manager and clone it to deploy the 2nd OVM Manager). Because this the Ops Center has problem to configure the second OVM Manager. To fix it the following steps were performed:
- uninstall OVM Manager
- remove file /etc/sysconfig/ovmm
- install OVM Manager
- import config (server pool, VM, etc...)
To prevent this issue (false job status), Ops Center could return a error in the discovery job saying that there is already another OVMM with same UUID... -
Storage Plugins for Ops Center Storage Discovery
Oracle VM provides for several vendor storage plugins when connecting to iSCSI storage.
Oracle Enterprise Manager Ops Center allows for discovery profiles but only has a SunZFS Storage Appliance SCSI plugin in its drop down, not even the Generic iSCSI plugin OVM uses.
Can the Oracle VM plugin be used with Ops Center?
What are the plans to support vendor specific storage plugins for Ops Center?
Is there a development guide for writing a storage plugin for Ops Center?We had some discussions along the same lines in our organization, and it came down to SA's and DBA's requiring different toolsets and their comfort level with them. Of course, a lot of this was inherited from the hardware being Sun before it was merged into Oracle, but the situation remains. Also, the SA's came to the conclusion to use Ops Center before the DBA's got around to installing their management interface (we came from a script-based management environment) -- that has something to do with it as well.
If you get to start from the ground up, that's a slightly different matter. -
NOTICE OF PLANNED OUTAGE:xVM Ops Center
NOTICE OF PLANNED OUTAGE:
The Sun patching and Inventory services will undergo planned maintenance this Friday (1 August 2008) from 1900 EDT to 2300 EDT.
xVM Ops Center customers may be unable to transfer to the Inventory Portal, register newly discovered gear and download patches and knowledge. They may also experience issues with their Satellites reaching Sun services during that time.
Thank you for your understanding,
Sun xVM Ops Center Team
Edited by: ForumModerator on 31-Jul-2008 19:49I am not able to ping it.
*$ tnsping "(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/var/opt/sun/xvm/oracle/app/oracle/product/11.2.0/ocdbhome/bin/oracle)(ARGV0=oracleOCDB)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=hostXXX)(USER=oracleoc))))"*
TNS Ping Utility for Solaris: Version 11.2.0.3.0 - Production on 20-MAR-2013 22:51:10
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Attempting to contact (DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/var/opt/sun/xvm/oracle/app/oracle/product/11.2.0/ocdbhome/bin/oracle)(ARGV0=oracleOCDB)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=hostXXX)(USER=oracleoc))))
TNS-12560: TNS:protocol adapter error
But listener is running on port 11176. I guess this is default port for OC
*$ lsnrctl status OCLISTENER*
LSNRCTL for Solaris: Version 11.2.0.3.0 - Production on 20-MAR-2013 22:51:35
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hostXXX)(PORT=11176)))
STATUS of the LISTENER
Alias OCLISTENER
Version TNSLSNR for Solaris: Version 11.2.0.3.0 - Production
Start Date 20-MAR-2013 22:49:48
Uptime 0 days 0 hr. 1 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /var/opt/sun/xvm/oracle/app/oracle/product/11.2.0/ocdbhome/network/admin/listener.ora
Listener Log File /var/opt/sun/xvm/oracle/diag/tnslsnr/p3379-05/oclistener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hostXXX)(PORT=11176)))
The listener supports no services
The command completed successfully
Those two commands do not exist on Solaris 11. -
OEM 12c OPS Center Installation issue : Error installing ipmitool - Help
Hi Experts,
I need your urgent help, I am trying since long to get this basic installation done for OEM 12c OPS Center. It is failing with below error :-
System Configuration : -
[root@test tmp]# uname -a
Linux test 2.6.18-128.el5PAE #1 SMP Wed Dec 17 12:02:33 EST 2008 i686 i686 i386 GNU/Linux
[root@test rda]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.5 (Tikanga)
[root@test tmp]#
Ops Center Enterprise Controller Installer
(version 12.1.2.2161 on Linux)
1. Check for installation prerequisites. [Completed]
2. Check that required RPM packages are present. [Completed]
3. Configure file systems. [Completed]
4. Install prerequisite packages. [Completed]
5. Install Agent components. [Not Completed]
6. Create Deployable Proxy Bundles. [Not Completed]
7. Install application packages. [Not Completed]
8. Run postinstall tasks. [Not Completed]
9. Install IPMI tool. [Not Completed]
10. Set database credentials. [Not Completed]
11. Install and Configure Oracle Database. [Not Completed]
12. Seed Ops Center Database Schema [Not Completed]
13. Install Service container components. [Not Completed]
14. Install Core Channel components. [Not Completed]
15. Install Proxy Core components. [Not Completed]
16. Set Proxy database credentials. [Not Completed]
17. Install Enterprise Controller components. [Not Completed]
18. Install Update Connection - Enterprise. [Not Completed]
19. Install Ops Center BUI components. [Not Completed]
20. Install OS provisioning components. [Not Completed]
21. Initialize and start services. [Not Completed]
Failed Step: Install Agent components.
The following is a portion of the installer
log which may indicate the cause of the error.
If this does not indicate the cause of the
error, you will need to view the full log
file. More information on how to do that is
available below.
Installed oracle-hmp-tools-ubiosconfig.
utils/install_pkg -a -R /opt/sun/n1gc/pkgs -L /var/scn/install/install-log_12.1.2.2161_29050 i386/redhat5/ipmitool-1.8.10.4-1.el5.i386.rpm os=redhat osrel=5 arch=i386 rpmopts=--relocate root=/opt/sun/n1gc/pkgs
Error installing ipmitool.
24 packages installed.
1 package failed to install.
Errors were encountered; see log file for details.
Detailed installation log is at /var/scn/install/install-log_12.1.2.2161_29050. Symlink /var/scn/install/log was updated to point to it.
Uninstall using /var/scn/install/uninstall.
Error running Agent Controller installer: 1
Refer to /var/scn/install/log for more info.
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.5816.
t. Try this step again (correct the failure before proceeding)
x. Exit
Enter selection: (t/x)Reinstalling version 2.2.3a-1.el5 of oracle-hmp-libs.
rpm upgrade replacepkgs replacefiles nodeps --root / i386/redhat5/oracle-hmp-libs-2.2.3a-1.el5.i386.rpm
policycoreutils-1.33.12-14.8.el5
Installation of oracle-hmp-libs, version 2.2.3a-1.el5 was successful.
Reinstalling version 2.2.3a-1.el5 of oracle-hmp-tools.
rpm upgrade replacepkgs replacefiles nodeps --root / i386/redhat5/oracle-hmp-tools-2.2.3a-1.el5.i386.rpm
Installation of oracle-hmp-tools, version 2.2.3a-1.el5 was successful.
Reinstalling version 2.2.3a-1.el5 of oracle-hmp-tools-biosconfig.
rpm upgrade replacepkgs replacefiles nodeps --root / i386/redhat5/oracle-hmp-tools-biosconfig-2.2.3a-1.el5.i386.rpm
Installation of oracle-hmp-tools-biosconfig, version 2.2.3a-1.el5 was successful.
Reinstalling version 2.2.3a-1.el5 of oracle-hmp-tools-ubiosconfig.
rpm upgrade replacepkgs replacefiles nodeps --root / i386/redhat5/oracle-hmp-tools-ubiosconfig-2.2.3a-1.el5.i386.rpm
Installation of oracle-hmp-tools-ubiosconfig, version 2.2.3a-1.el5 was successful.
ipmitool is not installed on the system, so installing it.
+rpm upgrade replacepkgs replacefiles nodeps root /opt/sun/n1gc/pkgs relocate i386/redhat5/ipmitool-1.8.10.4-1.el5.i386.rpm+
rpm: relocations must begin with a /
Error 1 installing ipmitool.
24 packages installed.
1 package failed to install.
Errors were encountered.
End Time: Sat Dec 8 05:57:14 IST 2012.
Error at ipmitool installation even though rpm is present -
Deploying software with Ops Center
Hi all,
OK, so Ops Center will provision an OS, patch the OS, and upgrade the OS, but is it also capable of deploying additional software after the OS is up and running ?
For example, packages for third party backup agents (TSM, Networker, Netbackup etc).
Basically, can I import non-OS packages into the software library, and create projects/plans to deploy those packages on remote hosts after the OS has been provisioned ?
Cheers,
GrahamAbsolutely, you can use Ops Center to deploy any 3rd party application, scripts, TAR/ZIP files, configuration files and pre/post action scripts. After uploading those as 'Local Content', you can either deploy them through "View/Modify Catalog" under each OS asset, or use OS profile to automate the deployment of multiple components together.
Please review the following document about Local Content:
http://docs.oracle.com/cd/E27363_01/doc.121/e27511/ftr_software_libraries.htm#BABEJICB
And how to use OS Update profiles:
http://docs.oracle.com/cd/E27363_01/doc.121/e27511/ftr_os_update.htm#OPCFG6169
Eran -
Performance report in ops center.
It is possible to create performance reports in ops center like PRM module in SunMC is doing for CPU Usage, Disk, Memory, Network.. etc.. ?
Thanks
AntonioHi Antonio,
You can also look at the Halcyon Neuron Performance Manager (http://www.halcyoninc.com/products/PerformanceManager/index.php). It hooks into Ops Center and/or SunMC to automate a lot of the reports (on top of what Ops Center provides out-of-the-box).
Note: I work for Halcyon, but part of my day job is also deploying and configuring Ops Center, so I hope this post is considered relevant.
Regards,
[email protected] -
Console redirection not working when ILOM is launched from Ops Center.
Hi,
I just installed Ops Center and added a few servers as assets. I'm having trouble to get console redirection when I start LOM Manager from within Ops Center.
If I point my browser and login directly to a server's ILOM web interface, I get console redirection without problems. If I do it through the "Start LOM Manager" option in Ops Center, I get an error message: "Cannot launch Java application" when I try to start redirection.
Is this normal behavior?
Thank you for your help.Do you mean the 'Launch LOM console" from Action pane? If so, check your java version on the PC/laptop you are accessing OC from.
What is your OC version?
I am not finding any issue in accessing the ILOM console. -
Is there a way of getting Firefox to automaticly import the Explorer settings upon install?
Hi!
I'm trying to repack Firefox 3.6.3 into a MSI for a deployment install trough-out our organization. Since we're using Explorer as the default browser at the moment our users have all their bookmarks and such stored in Explorer. Now I'm wondering..
Is there a way of getting Firefox to automaticly import the Explorer settings upon install?
-Without having the wizard popup.
I also don't want Firefox to be the default browser since the users have to decide for them self. But atleast they have there bookmarks / defaultpage and proxy settings if they decide to go for Firefox.
Regards
//MSI-Packager
== This happened ==
Every time Firefox opened
== Firefox is installed ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.78 Safari/532.5I'm not sure if you have the capability, but did you try copying from your premiere sequence and then pasting into your after fx timeline? i was working with a MUCH shorter video with a mix of merged clips (interview footage) and video clips (b-roll). the video clips imported, but the merged clips did not. i put the timeline cursor to the right point in the after fx timeline, copied the premiere clip from the sequence, pasted it into after fx.
Maybe you are looking for
-
HT1923 msvcr80.dll error on Windows 7
I began with a msvcr80.dll error on Windows 7. Searching I discovered it was iTunes giving me grief so I attempted to uninstall it. I tried the steps on an Apple web page (can't find it now but it is the same here: http://pcsupport.about.com/od/findb
-
IMac displays only black & white
I set some wrong parameter and my iMac display switched from color to black & white. I cannot figure out how to change it back to a color display. Please help.
-
Want to show some controls on OAF Printable Page
Hi, I have a requirement to show some fields which are not available on normal OAF Page. How can I achieve this, please help. It is urgent.
-
So is this Possible to update already existed Receiver Flat/XML File ?
HI , On Receiver File (FTP) Side ,So is this Possible to update already existed FLAT/XML File with some values using Receiver File Adapter?? Like I have 3 Columns in a Flat File/XML File :- Name, Deptid, Expenses. NameA, 8000, - Currently Blank -
-
I have recently switched to icloud. Lately I have not been able to receive emails. A msg comes up asking me to reenter my password. Perhaps I am entering the wrong password and have forgotten what it is. How can I find my old password or change i