Importing transport request bypassing quality system

HI,
I have a transport request in DEV BW system which is released. For some reason my Quality BW system is down so I cannot import the request in Quality BW system.
Usually we release the request from DEV , say request number DBIK1234, then import that request in quality system. After that we import the same request DBIK1234 into Production.
But for some reason quality system is down, so can we import the request bypassing the quality and directly into Production BW system??
Regards,
Rahul S

Hi Rahul,
Directly Transporting to PRD from DEV is not considered a "Best Practice"
and is therefore not encouraged. You should import into QAS first then the
Request is available in the PRD import buffer, and you can bypass the
recommended testing process if you really want to. However it is still
possible to import directly into PRD by manually adding the Transport
Request to the import Buffer.
We can also configure our TMS to add released TR's to Quality and PRD importing at the same time.
Better if you go through Transport Management System Documentations before you take decision.
Hope this answers your question.
Regards
Ramesh V

Similar Messages

  • Problem during import of 121 transport requests to productive system

    Hello
    We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in  TRJOB  as well).
    In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
    In SM37 I can see it as  job "RDDGEN0L" with  repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting  that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
    For fist two indexes I know they are not present  as objects "LIMU""INDX" in any transport request beeing imported.
    Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
    Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
    PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
    There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
    Does anyone knows workaroun to solve production

    are you importing these transport requests simultaneously into production?
    I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
    Rohit

  • How to find the source and target systems of an imported Transport Request?

    Hello,
    How to find the source and target systems of an imported Transport Request?
    chinna.

    Hi Chinna,
    In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
    DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
    Regards
    Ashok

  • Regarding query transport in BW quality system

    Hi Experts ,
    When I transport my query to BW quality system. It is showing error like "error activating element " .
    I searched in SCN and found that name for this technical element can be seen in RSZELTDIR table.
    I got technical name and it was query name itself. Again I transported only this element and it is giving same error.
    I am working in BW 7.4 and fresh implementation is going on .
    Is there anything which is missing while transport query in quality system .
    I have attached snapshot .
    Please help.
    Thanks
    Devesh Varshney

    Hi,
    Please try to check and follow below steps.
    1. Thru RSA1-->transport connection, collect your query and all elements(RKC,CKF,variables ..etc)
    2. Later check qll query elements are saved in custom package or &tmp. if its in $tmp then save package and store into custom package.
    3. collect objects into new Transport request.
    4. Check your transport request have any inconsistencies thru program - RSO_TLOGO_CHECK_REQUEST. Or
    5. later release and import to targets system.
    Even cross check query have any inconsistencies thru program - QUERY_CHECK.
    if you get error, please share error information in detailed.
    Thanks

  • No Transport request in Virtual system

    Hi,
    I have setup the STMS , where we do not have production server hence i have used virtual system.
    All Transport request moved from Dev to Quality which appears fine the queue of QAS Server, but not appearing in Production Server which is virtaul.
    kindly advise.
    Thanks you
    irfan.

    Hi,,
    We do not have any QA Approval procedure, but all requests are assigned to one project.
    Seconldy i went into the Tcode SE01 entered the released transport number but i could not see any such logs which says waiting for QA approval.
    all it says is this..
    Log Overview for DEVK900421
           DEVK900421              MM-Release Strategy
             DEV        System DEV
                        Checks at Operating System Level         14.09.2010 02:14:24    (0) Successfully Completed
                        Pre-Export Methods                       14.09.2010 02:14:27    (0) Successfully Completed
                        Export                                   14.09.2010 02:14:33    (0) Successfully Completed
                 Import steps not specific to transport request
             QAS        Quality Server
                        Selection for Import                     14.09.2010 02:14:33    (0) Successfully Completed
                        -> Continue: Other Transport Ggroup      14.09.2010 14:53:51    (0) Successfully Completed
                 Import steps not specific to transport request

  • "update rules inactive " error when importing transport request

    Hi experts,
    I am stuck while importing transport request of update rules. I am moving transport request of update rules from 1 system to another and stuck while importing it in 2nd system. Only two update rules are stuck among all giving an error of "inactive update rules".
    I have again tranported it twice after activating theose two update rules.
    Please help!!!!!

    Hi Heena,
    Can you provide more details of the issue like is it a DSO to DSO transformation, error message etc.

  • Re-importing Transport Request

    Hi,
    I think it's a basis question, but you might know the answer.
    It's possible to import transport request which is already completely imported into production system, since I want to transport it to other client in production system.
    Advance thanks.
    Regards,
    Balaji Viswanath.

    Hello,
    Re-importing is possible as well in STMS as with parameter 'unconditional mode' of the tp-Tool. Use unconditional mode '1' to reimport when using tp from command line. In STMS, import the single request by positioning on the request in the import queue and using 'request -> import'. As Option in the following popup, choose 'Import request again'. You might have to add the Request to the import queue again manually, if it is no longer in the import queue.
    regard, Kathrin!

  • Transporting Transport Request from One System to other

    Hi All,
    I want to create tranport request from ECC 5.0 System to ECC 6.0 system.
    Please let me know steps for creating transport request and transporting transport request from one system to other system.
    Thanks in advance.
    Best Regds,
    zubera

    Hi,
    You cannot transport request from ECC5.0 to ECC6.0.
    Instead follow this:
    <b>In ECC5.0</b>
    Include all the objects into a transport request & provide the transport request no. to BASIS.
    BASIS team will create 2 files for you based on the transport request no.
    <b>in ECC6.0</b>
    Provide the 2 files to BASIS Team & ask them to import them.
    The objects would be available in ECC6.0
    Best regards,
    Prashant

  • Importing Transport requests

    Hi,
    When i click on import transport request to import the request to target system (DEV to QTY) ,what process will be happen in background.
    Thanku

    This is a very basic question and can be easily answered by doing some reading and research on your own.
    Please read the "Rules of Engagement".

  • Importing transport request into CE7.1 giving trouble

    Hi All,
         When we are trying to import the transport *.sda files into CE7.1. Guided Procedures->Administration->transport--->import transport Requests giving      No endpoint alias has been maintained; create an endpoint alias first.
    If we try to create End point configuration there is no SAP System. Can i have any idea to solve this problem.
    ---> i have to give any other privileges or i have to enable any thing
    Please let me know .....
    Thanks and Regards,
    Sridhar

    I got the solution through this
    http://help.sap.com/saphelp_nwce711/helpdata/en/43/F3C42571122AE3E10000000A422035/content.htm

  • Import Transport Request

    Hi,
       When i click on import transport request to import the request to target system (DEV to QTY) ,what process will be happen in background.
    Thanku
    Edited by: d pavani on Jan 24, 2011 10:18 AM

    >    When i click on import transport request to import the request to target system (DEV to QTY) ,what process will be happen in background.
    - the system starts "tp import <transport> pf=<transport profile>"
    - tp calls R3trans
    - R3trans triggers an event in the system to start postprocessing
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm
    Markus

  • Imported Transport request has been deleted

    Dear all ,
    Imported Transport request has been deleted by mistakenly in my sandbox server .
    is there any issue will be happen.
    and one more Clarification
    usr\sap\trans\log --  this directory is contain 2 GB log files  . if i delete this log files or taken a backup to some other drives any issue will come .
    kindly advise me

    > Imported Transport request has been deleted by mistakenly in my sandbox server .
    If you have the source system where the transport was created you can use a simple ABAP like
    report ZRERELEASE_REQUEST
    PARAMETERS: TRAUFTRG(10) TYPE C DEFAULT 'SIDK'.
    parameters: status like e070-trstatus default 'D'.
    PARAMETERS: TEST(1) TYPE C DEFAULT 'X'.
    TABLES: E070.
    SELECT * FROM E070 WHERE TRKORR = TRAUFTRG.
       WRITE: / E070-TRKORR,  E070-TRSTATUS.
       IF TEST = ' '.
        MOVE status TO E070-TRSTATUS.
        WRITE: / E070-TRKORR,  E070-TRSTATUS.
        UPDATE E070.
       ENDIF.
    ENDSELECT.
    start it, enter your request number and execute. Then you can re-release the request.
    Markus

  • How to release a Transport Request at operating system level

    HI,
    How to release a Transport Request at operating system level. Please specify the complete commands along with the pf parameters for TP Export only.......

    <b>tp export <request></b>
    This exports the complete request from the source system. This command starts the export of a request from the operating system level. Only use this command in exceptional cases. The SAP System uses the command expwbo to release requests from CTS transactions
    <b>tp cleanbuffer <sapsid></b>
    This deletes successfully imported change requests from the list of requests that are marked for import into the SAP System <SAPSID>. This function is contained in the commands tp import all <sapsid> and tp put <sapsid> .
    <b>tp delfrombuffer <request> <sapsid></b>
    If the specified request is marked for import into the specified SAP System, this flag is deleted from the import list.
    Reward points if you find this helpful to you.

  • Program for Importing Transport Request

    Dear all,
    I am thinking of writing a program to perform the import of transport request into the system after the transport request is added to the buffer.
    The transport request is added to the buffer using FTP.
    Please kindly give me some guidance as to how can I write this program for importing transport request. Thank you.

    Hi Prashant,
    My 2 systems are not linked to each other, one is running SAP 4.7 and the other is running ECC6.0. Can I still use STMS_IMPORT?
    When I use STMS_IMPORT, I hit some errors. It is either "tp finished: A tool used by tp broke down" or "tp finished: A tool used by tp aborted". DO you have any idea what is wrong? Thanks for your help.

  • How to find out which User id used to import Transport Request thru STMS ??

    Dear Experts we have  6 BASIS Consultants in our org with STMS authroizations.
    In every day we review Imported Transport request thry Import History Option in STMS.
    Our requirement is which request is imported by which BASIS Consutlant thru STMS?
    Thanks for your replies in advance
    Regards

    Hi,
    You should be able to see the "owner" of a transport request under the import history in STMS. If you need the user too you can choose the menu "Edit --> Display More".
    Best Regards,
    Srividya.R

Maybe you are looking for

  • Problems getting an external hard drive to work on the new Airport Extreme

    I have spent hours trying to get my 320GB external hard drive to work with the new airport extreme 802.11N. I have spent hours pouring over all of the posts here discussing possible solutions, all of which have not worked. This morning, however, I ga

  • Output device for output condition record

    How can i make an output device a required entry when creating a new output conditon record?  Example:  When going into VV31 and setting up new output condition record, I am trying to force user to specify an output device.  Can some one let me know

  • Parsing a file name and printing a portion to an image

    Ive got a script writen for me that reads the file name of the image, creates a new layer , prints it ti the bottom of the image. I was wondering if anyone knew if there is a way to parse only a portion of the file name out and print that to the scre

  • Share online fails to launch: "system error" 5800

    hi, i've added ovi and flikr accounts to my share online application on my nokia 5800 i've managed to upload several photos but after restarting the phone the share online application fails to launch. It thows "system error" message upon loading and

  • Exchange rate in MIRO

    Hi SAP gurus... I have this problem: When I post the "goods/service items" in MIRO, the exchange rate reamins exactlye the same as I entered in my Purchase Order, however, when I post the "planned delivery costs" the exchange rate changes to the sugg