Importing two sets of pictures into same collection

Hi,
I have two sets of pictures on 2 different CF cards and would like to import them into the same collection because they belong together. I already imported one set of photos from one CF card into the appropriate collection name. Since there doesn't seem to be an ADD TO EXISTING COLLECTION option how does one add pictures from another folder to an existing collection? I know one can drag and drop them but I have over 100 additions.
Don

> I'm using LR 2. My folders are named Switzerland 1-6 for all my Swiss photos taken on 6 CF cards.
Are you splitting the shoot into 6 folders just because one CF card happened not to have enough room for all photos? Why not just put the into one folder?
> I didn't see an ADD TO COLLECTION option so I just dragged and dropped this time, but it would be so much easier to ADD them.
Select photos in folder view, right-click the target collection and choose "Add Selected Photos to this Collection".
> My collections are named according to the town or canton where the photos were taken.
If the collection are based on metadata, then smart collections indeed is the best way. Use the proper fields in the metadata panel to add towns and cantons, then define a Smart collection that says "City contains Zurich". And you're done. Automatically.

Similar Messages

How do I combine two or more pictures into one?

How do I combine two or more pictures into one?

I found out how to do what I wanted and I'm giving my steps in hopes that it might help someone else. I wanted to put several photos from a file onto a new blank image. This is what I did.
1. Create a blank page.    File/New/ Blank File.   Put in the size. I used 8x10.
2. Bring the photo you want to use into Elements as you always do. It will list along the top next to the blank sheet.
3. Choose SELECT (top of screen)/ Select All.
4. Choose Edit/Copy   or Command "C"
5. Click on the Blank File.   Chose Edit/Paste or Command "V"
6. Click on Image/ Transform or Command "T". There should be a dotted line around your pasted image. You can then move and adjust the image to how you want it. When finished, press the check-mark on lower right of photo.
7.   Repeat this with all the photos you want on the new blank file.
8. You will see on lower right of Elements, the background layer and as many layers as you have photos. These layers need to be permanently placed on the background layer. Go to Layers and press Merge Visible. This will merge all layers to the background.
9. Save as and you are done.

I am using Lightroom on my MAC where I import the finalized JPEG-pictures into iPhoto to create a slideshow (for instance in combination with films). When exporting the slideshow with a 1080p resolution to iTunes I experience difficulties (missing slides

I am using Lightroom on my MAC where I import the finalized JPEG-pictures into iPhoto to create a slideshow (for instance in combination with films). When exporting the slideshow with a 1080p resolution to iTunes I experience difficulties (missing slides and black transitions). When using JPEG-pictures directly from the camera there are no problems, so the manipulation in Lightroom seem to cause corrupt files. Does anyone recognize tje problem and could it have anything to do with the introduction of the Yosemite software? Is Lightroom already Yosemite-proof?

In iPhoto 11 the Originals folder is renamed Masters.
IPhoto menu -> Provide iPhoto Feedback and report the bug.
Regards
TD

I have got the canon 550d, and when i try to import those photos to iPhoto, it imports two photos of the exact same photo, what should i do

I have got the canon 550d, and when i try to import those photos to iPhoto, it imports two photos of the exact same photo, what should i do

Check the settings on your camera to make sure you're not shooting Raw and Jpeg pairs or shooting bursts.
Regards
TD

Problem when importing two photo galleries with the same name. Please Help!

Hi Guys,
I'm not a pro in dreamweaver so I would appreciate if your answer wouldn't be too technical...
Anyway I have experienced a problem. Heres the sotory, I have been making a websie in DW and used Adobe Bridge CS5 to create a photo gallery SWF file that I would use for my website. The problem is that I want to use two different photo galleries on two different pages however when I save my second photo gallery in bridge, it saves every file with the exact name as the first photo gallery I created and is working fine... Thus when I try to import the photo gallery files into my website folder structure, I find that it asks me to rename them because the files from the first photo gallery are called the exact same names.. Now obviously when I try to rename them dreamweaver gets confused and goes to the wrong folder and uses the images from my first photo gallery in the second one.
So I guess my question is how can I organize my folder structure to be able to import multiple galleries without dreamweaver getting confused because bridge names all the files the same. Or how could I save the files through bridge so that they have different names and will work fine when I import into DW...
Thanks and sorry for the essay,
Patrick

#1 You cannot have two files / folders or galleries with the same name. Redo your image Galleries with different names.
#2 SWF (flash) is not visible to iPhone, iPad, iTouch, Android or other web devices that don't support Flash Player. These users will see nothing. You might wish to explore other photo gallery / slideshow options that rely on jQuery instead of Flash technology. Some links below. A Google search will reveal many others.
jQuery WOW Slider
http://wowslider.com/
jQuery Cycle
http://www.malsup.com/jquery/cycle2/
jQuery Nivo Slider
http://dev7studios.com/nivo-slider/
Nancy O.

Problem importing two service interfaces using the same data types

Hi,
I've been playing around with BPM for a while. Now I wanted to add a custom service interface to my starting event. I created the interface in ESR of CE 7.11. After importing I get this error message and I can't use the interface:
Cannot change XsdSimpleTypeDefinition AcademicTitleCodeContent by importing the document http://sap.com/xi/APPL/SE/Global::src/wsdl/TestInterface.wsdl, because it is already defined in the document http://sap.com/xi/APPL/SE/Global::src/wsdl/rootwsdl_CustomerERPByIDQueryResponse_InService.wsdl in this project. Importing into another project might be possible.
Of course the problem is clear, but how can I achieve importing two service interfaces that use the same data type without changing the xsd source?
Thanks in advance,
Mane

Sorry for the late answer, but I am really busy at the moment.
Unfortunately I can't the Interface and data types are already changed.
But this happened various times. Each time I already had imported a SAP Enterprise Service into NW BPM that contains a bunch of inline data types. While creating my own interface I referenced one of those data types that are stored in a SAP namespace. After import the error message appeared.
In the wsdl of the created interface there is a import statement for the namespace where the referenced data types origin from. Additionally there is a namespace definition xmlns:p1="SAPnamespace". In the element the type is "p1:ReferencedType". Could this maybe cause the error, because one time it is with this leading p1 in my created wsdl and once without in the SAP Service wsdl?
Thanks and I am looking forward to next EhP of NW BPM,
Mane

Can I import two sets of data to Essbase at the same time?

For example, use two MaxL Scripts to import data to one Essbase Application Datatbase in the Same time, is there any impacted or will fail one of them or nothing will happen but just slower?

Hi,
It is possible you run 2 dataloads at the same time, there will be probably be an impact in performance than just loading one file at a time, not sure of the impact, you will have to test.
If you are talking about a BSO cube you could also have a look at the essbase configuration setting DLTHREADSWRITE to see if you can improve the dataload time by increasing the threads.
If it is an ASO cube then you should be able to do multiple dataloads into different buffers, though you have to commit them to the database at the sametime.
Cheers
John
http://john-goodwin.blogspot.com/

How to make two matrix and table into same group in SSRS

Hi
i need to dispaly to dispaly data matrix and table . but matrix data on first page and table data on second page.
how to achive this . if i give pagebreak for every new instance for matrix, only matrix data is getting dispalyed in one page and on the second page seocond record date is getting displayed. after all matrix data is displayed ( in separate pages) , table
data is being dispalyed.
but i want to display matrix data on first page and table data on the second page for the first record. for second record also it should display matrix data on 3rd page and table data on 4th page etc..
i mean how to make matrix and table data as same group. so that i can set "page break for new instamce" etc..
how to achive this in SSRS2008

Hi Ramkanuganti,
From your description, you want to group both the matrix and table on the same field and add a page break between the two controls for each instance at run time.
To achieve your goal, we can display the matrix in a list and display the table in a nesting list. Please refer to the steps below:
Drag a “List” to the design surface. Drag the matrix into the top of the list (list1).
Drag a “”List” to the list1, under the matrix. Drag the table into the nesting list (list2).
Select “list1” and open the “Group Properties” from the “Row Groups” pane. Add the field on which you want to group the data. In the “Page Breaks” tab, select the “Between each instance of a group”.
Repeat step 3 to configure the “list2” using the same field. Additionally, please also select the “Also at the start of a group” option.
For more information about how to work with list, please refer to:
Adding a List
If you have any further questions, please feel free to ask.
Regards,
Mike Yin

Two SCE 2000s sharing the same Collection Manager?

Does anyone know if two seperate SCE 2000 devices can share a collection manager, or do they each need a seperate CM? If they can shere, is there any specal setup on the CM itself?
Thanks.

Just a thought!
If you change the security settings on the default itunes folder so that you other user can access the folder then you could change the itunes preferences for that other user to use you newly shared folder. then you'd have both itunes apps using the same file set and library. all you'd have to do then was create a playlist for you and for her.
I've never tried it myself, i just let my wife use itunes on my account.
john

Why can't I import two particular MP3 files into iTunes?

I went into the Importing menu of my iTunes preferences and verified that it is using the MP3 encoder. But when I drag and drop the mp3 file from my desktop to iTunes it will NOT import it! Ugh! Any suggestions?

What is the difference between adding a music file and importing one?
The KB article "iTunes: About the Add to Library, Import, and Convert functions" explains it pretty well.
It plays fine in QuickTime. When I do a "get info" it shows MP3 Audio File as the "Kind".
Format: MPEG Layer 3, Stereo, 11.025 kHz
Data Rate: 128.27 kbits/sec
At first glance those look normal values for an mp3 file. The sample rate of 11.025 kHz is unusually low for music though (a common value is 44.100).
iTunes is capable of converting a file into mp3 with sample rates between 8.000 and 48.000 kHz, so it should? recognize the file as valid and add it to the library.
Although 'MP3' is a standard, there are many ways to create one. It seems that sometimes it results in files that iTunes doesn't like, especially VBR MP3's. I personally have not encountered such "trouble mp3's" yet.
If you still can't add your mp3 to iTunes, try to export it in QuickTime (use Sound to AIFF) and then add it to iTunes.
Alternatively convert it using Max. It's not an easy to use application at first look, but once you are familiar with it, you'll probably appreciate it as a powerful app. for importing CDs and converting files.
M
17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner Mac OS X (10.4.8) iTunes 7.0.2

Importing two different video sources into FCP

I have captured footage from a Sony HDV 1080i using iMovie HD and imported it into FCP. I also have footage captured in DV-NTSC 720x480 format. I would like to use both formats in a video clip. However, whenever I import Sony 1080i footage into the timeline it needs to be rendered and it takes a fair amount of time. Is there anything I can do to the footage so that it does not need to be rendered everytime I drop it into the timeline?

You have to elect which timeline you want, HDV or NTSC DV. Either one must be rendered.
You might try a recapture of the HDV and downconvert it in the camera on capture.
Settings are in the manual
david

Split pictures into a new event?

I took two sets of pictures, one last night and one today. When I imported the pics into iPhoto, I was hoping it would split them into two different events, since they were taken on different days, but it imported them all into a single event. How can I select a range of pictures in this event and split them into a new event?

While viewing the photos in the Photo mode of iPhoto with the View ➙ Sort set to By Date Command-click on the photos you want to put in their own Event and use the Event ➙ Create Event menu option.
OT

When I migrated to iCloud I ended up with two sets of calendars.

When I migrated to iCloud I ended up with two sets of calendars. I now have two calendars named "Home", two calendars named "Work", etc. I can't just delete one set, because my events somehow ended up split across the calendars.
Is there any way to merge these two sets of calendars into one set? I can use Export and Import to move future events from one calendar to another, but I also want to move past events.
FWIW, the duplicate calendars appear on all my devices and also on iCloud.

I fixed this by doing the following:
Renamed one set of calendars to "name-1" and the other set of calendars to "name-2". Gave the different calendars different numbers.
Located all events in the "-1" calendars by turning off the "-2" calenders. Used the Year view to make sure I wasn't missing anything.
Changed each event to point to the "-2" calendar.
Deleted all the "-1" calendars.
Removed the "-2" from all the remaining calendars.
This didn't end up taking that long, and the changes were immediately reflected on all my devices.

Can no longer import 2 CD's at the same time in iTunes 10.5.2, what happened?

i was able in the previous version of itunes to be able to import two CD's at the same time from two different optical drives. instead of importing automatically from the pop up window i could right click on the CD under the devices column and click import and i could to that to both devices and was able to import two at a time.
then i updated the itunes and this feature is gone. i no longer have the option when i right click on the device to import a cd.
how do i get around this?
do i have to install a earlier version of itunes?
Help Please, i have a ton of cd's to import!!!!!!!

Hello JaboorMBA2011,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Have a nice day,
Mario

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order. The "Apply Sort Field" and "Same album does not work, but ti is only these two RCA albums that do this. All other albums remain intact. Need help with this minor problem. Thanks.

UPDATE: This behavior (to an extent) still happens when "Repeat Album" is off. Instead of an infinite loop, it goes through all the tracks on the album (unsuccessfully) and kicks me out to the Album overview screen. Going back to list of Albums and tapping the Album again brings up "No Content: You can download music from the iTunes Store" but that screen immediately kicks me back to list of Albums.
So I am just even more confused now.

Importing two sets of pictures into same collection

Similar Messages

Maybe you are looking for