Importing via external usb CD drive to external hard drive-FW or USB?

I want to import my cd collection (no downloads) to a large external drive as AIFF. I'll be backing that up to another large drive later. I'll be using an external usb cd drive to avoid frying my internal cd.
My external hd drive has usb 2.0 and firewire 400 with an Oxford 934 chipset.
Will firewire and usb function simultaneously or should I save via usb ?
I'll be importing a large quantity of cds, and won't have time to check them, should I use Import Settings/Error Correction during import? I'd like to verify if possible.
It's doubtful I'll need to write a cd or dvd from the saved AIFF's as I have the master, but I might.
Anything else I should be considering here? I'm assuming iTunes is the best program for the job.
I'd appreciate any advice or feedback.

No reply.

Similar Messages

If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

No, and that shouldn't be done with an AirPort Extreme or Time Capsule.
(66017)

Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

Trying to download photos from IPHONE, IPAD to IPHOTO in IMAC after installing new hard drive.
How did you import the photos to iPad and iPhone?
If the photos have been synced to the iPhone and iPad using iTunes, you cannot sync them back.
See this document: http://support.apple.com/kb/HT4236
You can't reimport pictures synced from your computer to your device back to your computer. You can only import pictures in the Camera Roll or Saved Photos from your device to your computer. If you need to retrieve synced photos from your device:
If your photos are not in the Camera Roll on your devices, save them to the Camera Roll, share them to the Photo Stream, mail the photos, or, if you have iPhoto on the devices, use iTunes Photo Sharing.
http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnkee26bc1
Save photos to your computer using iTunes
Connect your iOS device to your computer.
Tap a photo, album, event, web journal, or slideshow and tap Share> iTunes.
Tap Selected, or change the photos you want to save (if you are saving a slideshow skip to step 4):
Select different photos: Tap Choose Photos, tap one or more photos, and tap Next.
Select a range of photos: Tap Choose Photos, tap Range, tap the first and last photos in the range, and tap Next.
Select all the photos in an album or event: Tap All.
In iTunes, click the button for your device and click Apps at the top of the window.
Below File Sharing, select iPhoto (in Apps).
Select the Shared Photos folder under iPhoto Documents.
Click Save To and select the location on your computer where you want to save the items.
To view your photos, go to the Finder and look in the location you selected above.

How to create External Hard Drive from Internal Hard Drive?

For my Mac, I want to get a 250GB external Firewire Hard Drive. I know I can purchase one as is. However, it seems that money can be saved by purchasing an internal hard drive and a hard drive enclosure. Is this correct?
If so, would the internal hard drive be an IDE?
Is there an enclosure that will make this IDE drive a Firewire/USB external drive?
Should the enclosure have a fan, on/off button?
Anything else to consider.
Thanks,
Herschel

Hi Hershel.
1) If you want to use the drive with both your PC and your Mac then you have two options. Either you format the drive in FAT32 (standard windows format) or you get hold of one of the utilities which allows you to read Mac HFS+ formatted disks on a PC (IMHO the better way to go). One disadvantage of using Fat 32 formatting for the drive is that you then won't actually be able to use it as an emergency "startup disk" for the Mac . The other problem is that Fat 32 can be problematic with large disks and files sometimes.
2) Your iMac has both USB2 ports and firewire 400 ports. There is no advantage really in getting an enclosure with Firewire 800 , because your iMac is limited to Firewire 400 anyway. The drive you buy to insert in the enclosure won't have any effect on this.
3) The reasons for getting a firewire capable enclosure for use with your Mac are that it is actually faster than USB2 (despite the higher rated speed of USB2) and because you can start up your Mac from an external FW drive, but not from an external USB2 drive. If you are formatting in Fat32 this won't be an issue because you won't be able to boot from it anyway.
4) The business about "parallel" and "serial" drives relates to the type of bridge in the enclosure that you buy, not to whether you want to connect it to a PC or a mac. Some enclosures are designed to work with "SATA" drives - ie Serial. Some are designed to work with "regular" IDE / ATA drives (ie parallel).
Just to make this clearer , think about this as involving two links in a chain. THe first link is from the drive to the enclosure. The enclosure needs to have the right sort of INTERNAL connection for the drive you buy - either SATA or regular ATA - regular ATA enclosures are more common than SATA one but large drives are now easier to find with SATA interfaces than IDE ATA. A few enclosures can accept either type of drive,but they tend to cost more.
The second link is the EXTERNAL one from the enclosure to your computer. In your situation it sounds as if you ideally need one which has both Firewire 400 and USB2 connections. (THere are also some cases which provide am external SATA connection for connection to the computer, but you wouldn't be able to use this with your iMac as it has no external SATA port).
Try a Google for the IceCube Pleiades and you should be able to come up with prices in a place somewhere near you. At present I'm not sure which country you are in.
Cheers
Rod

Greeting, I want to reformat my external hard drive using Mac OS Extended (Journaled, Encrypted ) but before formatting it, I want to make sure that if I loose the hard drive or the hard drive get stolen, no one will be able to retrieve or recover the in

Greeting,
I want to reformat my external hard drive using Mac OS Extended (Journaled, Encrypted ) but before formatting it, I want to make sure that if I loose the hard drive or the hard drive get stolen, no one will be able to retrieve or recover the information on it so could you tell me what kind of encryption will be used or is there any way to recover the information?
Thanks!

I think FileVault is used to encryp internal hard drive but I wanna encrypt an external hard drive with Mac OS Extended Journaled Encrypted which is completely different!

I have a Mac pro(1 free bay) and a mac mini I need to back both of them Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010) What option has the faster GB/s?

I have a Mac pro(1 free bay) and a mac mini I need to back up both of them (time machine) Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010)
What option has the faster GB/s?

Disk drive using native SATA bus interface will allow the drive to copy and always present and ready.
But once you have backup any hourly changes should be smaller and as long as the NAS and your switch should allow enough.
You should always have off line backups and don't rely on just one backup set or just TimeMachine.
WD RED models are designed for RAID and NAS and 7.2k instead of your more standard slower green 5400 rpm green models while still costing less than WD Blacks.
http://www.amazon.com/gp/product/B008JJLW4M/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
Clone to internal, TimeMachine to NAS is one way to go at it.

My MacBook Pro is not recognizing my external hard drive. The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data. Is there any way to resolve this?

My MacBook Pro is not recognizing my external hard drive. The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data. Is there any way to resolve this?

WE know Disk Warrior is more reliable, hence more useful, and should be in any disk mechanics toolchest.
For the record, I don't know anything of the kind. I have yet to see evidence that Disk Warrior is useful at all.
What I do know is that you seem to take every opportunity you get to promote it in these forums. Do you work for Alsoft?
Let me be a little more explicit. My opinion is that Disk Warrior is a waste of money if one has backups. If a journaled HFS directory is so badly corrupted that it can't be repaired by Disk Utility, then the volume should be reformatted and restored from backup, which has the same effect as running DW, but is probably faster and doesn't cost $99.

RT USB Format suddenly not finding Hard Drive

For a remote desktop RT PC running LabVIEW RT 8.6, I had tested 8 different motherboards in an attempt to get LabVIEW Real-Time
(Pharlap) to recognize an RT desktop’s SATA hard-drive and network card. We had
finally found a single motherboard that allowed LabVIEW Real-time to recognize
and format the SATA hard drive to run pharlap.
Unfortunately, that ASUS motherboard
has been discontinued, so we had to hunt once again for motherboards
that would run correctly with LabVIEW Real-Time. After some effort, we did find
another motherboard which allowed the USB format utility to format the SATA
drive and successfully boot the RT pharlap environment. Upon this success, our
company proceeded to order a large number of these new motherboards in case they
too became discontinued. However, the very same motherboard which operated
correctly 2 weeks ago can no longer see the SATA hard drive through LabVIEW
real-time, even though the BIOS correctly recognizes the hard
drive.
I find it particularly bizarre
because the hard drive does actually boot to LabVIEW Real-time on its own, but
upon booting via the hard drive, Pharlap states “Error booting hard drive
program,” and proceeds to run in safe mode *on the very same hard drive*. Any attempts
to reformat this drive via the 8.5.1 or 8.6 usb utility now result in “Unable to
detect ATA/SATA hard drive” even though the very same usb, hard drive, and
motherboard worked correctly in re-formatting, installing, and running remote VIs 2 weeks ago.
If you could please provide any
insight into this madness, it would be greatly appreciated. For reference, we
had previously used the ASUS P5K motherboard (which is now discontinued) and are
now experiencing our mixed success/failure on the Foxconn G33M motherboard. Both
of these motherboards use the ICH9 chipset that is AHCI and IDE compatibility
capable, which is a requirement for desktop RTs.

I've tried multiple hard drives that were full formatted to FAT16 and FAT32 in Windows XP and got the same result.
During the two week period, the motherboard had been removed from its case and sat on my desk with anti-static covers draped over and under it. I've been trying the motherboard without a case ever since, as that would confound issues further.
To make matters worse, I've been trying new motherboards with the ICH10 and ICH10R southbridge chipsets (AHCI and legacy IDE compatible), and the USB format utility freezes at "Transferring control to user program," so I can't even get to attempting a hard drive format there. I've tried changing the USB settings to Legacy as suggested in the NI literature and even unplugging the hard drives entirely, as the other motherboard still boots to the USB without a hard drive present, and it still hangs at the same place before the utility loads.
I've gone through every possible iteration of BIOS settings (especially the IDE ones) on every motherboard I've tried. Ever since the ICH8 chipset, I've never managed to get an actual PATA (IDE) drive to work either.
Here is a list of motherboards we've tried that didn't work due to either the USB utility hanging or the hard drive not being seen:
Intel DG33BU
TYAN S5220AG2NR
ASUS P5E-VM DO
ASUS P5N-MX
ABIT IP35 Pro
SuperMicro C2SBA
ASUS P5Q
MSI P45 Neo
The ASUS P5K worked but is discontinued, and the Foxconn G33M is the one that worked 2 weeks ago but doesn't now.

How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done?

How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done? I am trying to create a disc of player highlights for a collegiate coach, and I am using movie files downloaded to my hard drive from a DVD created on a PC.

No unfortunately it won't open in quicktime either. It does the same thing that Imovie does, separates it into two file folders audio and video, and if i select video it opens to reveal 8 files that cannot be selected. VIDEO_TS.BUP, VIDEO_TS.IFO, VIDEO_TS.VOB,VTS_01_0.BUP, VTS_01_0.IFO, VTS_01_1.VOB, VTS_01_2.VB, VTS_01_3.VOB. All of which cannot be opened or selected.
Opening it in Idvd and folllowing your suggestion works and I get a format code of NTSC. Is that the same? Thank you for your time and response.
CaCanuck

I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?

I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?

Unfortunately, that drive is long gone, probably back to the mfr. Drives are not returned when they are exchanged. You can go by and ask them, but the chances are slim to none.

Once my pictures are imported by iPhoto, where are they on my hard-drive?

Once my pictures are imported by iPhoto, where are they on my hard-drive?

You don't go that way.
iPhoto is a database, and you need to use the tools provided to access the data:
There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

Changed hard drive... How do I transfer from old hard drive to new hard drive

hanged hard drive... How do I transfer from old hard drive to new hard drive.
I have installed the new hardrive on my macbook and reinstalled the software... how do I transfer the information form the old drive to
the new one.
?can I put the old drive in another macbook and connect via firewire???
Thanks

Put the old hardrive in an external hardrive case....like this...
eshop.macsales.com/shop/firewire/on-the-go
.....this is just an example their are less expensive models....

I have a macbook pro. I had iphoto on it prior to my hard drive crashing. Hard drive was replaced but iphoto is no longer on. How do I get it back without paying for it?

I have a macbook pro. I had iphoto on it prior to my hard drive crashing. Hard drive was replaced but iphoto is no longer on. How do I get it back without paying for it?

Have you tried
http://support.apple.com/kb/HT4928

I had all my iTunes music backed up onto a hard drive; but the hard drive was stolen along with all the files I backed up onto it. However, the songs I had in iTunes still show up (I just can't play them.) Would it let me get them back?

I had all my iTunes music backed up onto a hard drive; but the hard drive was stolen along with all the files I backed up onto it. However, the songs I had in iTunes still show up (I just can't play them.) If I were to use iCloud, would it still take those songs and let me listen to them (and maybe re-download them?) Or am I out of luck?

Open iTunes, go to the iTunes Store, and then go to Purchased on the right hand side under Music Quick Links.
You can re-download all the songs, apps, or books you have previously purchased.
I'm not sure if this is a requirement, but just in case, make sure you download the latest version of iTunes (v10.3) too.

Hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.help?

hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.nothing is loading tho.

I see 10.6.3 in your profile---is tthat what you are trying to load? If so, it won't work. No PowerPC Mac like your G5 can run a Mac OS version higher than 10.5.8

Copy MBP Hard Drive to new Hard Drive while FileVault enabled?

Is it possible to copy MBP Hard Drive to new Hard Drive while FileVault is enabled? Also, what's the best way to image from a 700GB drive to a 300GB SSD? I'm currently using 250GB.

Hi, have you tried the Boot Camp forum ?
personally I think it should work...L

Importing via external usb CD drive to external hard drive-FW or USB?

Similar Messages

Maybe you are looking for