Importing video and Flash player 10 and above

I am trying to add a video to a presentation, but I can only get it to play in Flash player 9, anything higher I get connection errors, or it refuses to play.
I encoded the .mp4 with Adobe Encoder to a .f4v file, but it still won't play unless I'm using FP9.
I am loading the video by going to Video > Insert Video, and I have tried Event and Multi-slide Synchro with no luck.
Any suggestions?
Regards,
Kevin

What all browser did you check your output on? Can you also check on a different machine, playing it locally.
Can you try and set your CPLIBS files to the latest files available in the patch--
Please try the patch available here -- incase you have not till now-- http://forums.adobe.com/message/4623434
Let me know if this works?
Thanks,
Anjaneai

Similar Messages

Importing Video for flash player 7

Hi, im importing video for use on flash player 7. before
importing i note that the audio and video quality is perfect.
however after importing i notice the audio quality is not as good.
i need to import with the audio embedded with the video in the
timeline. i notice there are several audio settings (kbps) but im
not sure which is best. and of course i select high quality for
flash player 7.
any ideas to get rid of the lisp that is added to the
person's voice on import?
thanks!

What all browser did you check your output on? Can you also check on a different machine, playing it locally.
Can you try and set your CPLIBS files to the latest files available in the patch--
Please try the patch available here -- incase you have not till now-- http://forums.adobe.com/message/4623434
Let me know if this works?
Thanks,
Anjaneai

Sync and frame rate problems importing video to Flash CS3

Just like the subject states, I am indeed having frame rate problems importing video to Flash CS3.
When I export a video from Premiere with the settings:
1280x720
frame rate of 23.976
using H264 or Animation (basically every codec produces the same results),
"embed video on SWF and play in timeline"
When I do this the file exports fine. Playing it in Quicktime works fine and the audio syncs up no problem. But when I import it into Flash using the same settings, for some reason the movie clip is now too fast in that the video does not match the audio and seems to be at more like 12 fps now (just a guestimate). The action of the video is over long before the audio even comes in.I have verified that the frame rate is correct in Flash so it's not that.
I've done this literally hundreds of times in the past and suddenly it does not work and I can not figure out why. I'm not even really using video, but actually artwork that I am putting together as an animatic for an animated piece so the video could not have been imported incorrectly or digitized wrong either. Can someone out there please tell me how to make this work? Any help would be GREATLY appreciated!
-Mike

Thanks for you quick response however it really doesn't apply to what I am doing in any way. I will not be uploading the video to a server. I am using the imbed function so I can use it as a layer and then animate over it. It is just reference and will ultimately be deleted. The Fla file does indeed carry the same specs as I stated in my first post. I have done it this way dozens of times and I am trying to figure out why it suddenly will not work.
~Mike

Import video and audio from a dvd into FCP

Is there an easier way to import video and audio into Final Cut Pro - I am playing it on a DVD player and making a digital tape of it. Then logging and capturing it into FCP.

Hello and welcome to the forum!
Yes, there are a few ways that are faster. Have a look at this thread http://discussions.apple.com/click.jspa?searchID=-1&messageID=3465691
You could use software, such as "streamclip", or import by plugging your camera into your capture device and hooking your capture device into your computer and capturing by non-controllable device settings.
Good Luck

How do I import video and sound files from a hard drive into Final Cut Pro X?

I just installed the lastest upgrade to Final Cut Pro X. I have an external hard drive connected to my computer and I want to import video and sound files into Final Cut Pro X- how do I make the transfer?

File>Import Files (Shift-Cmd-I). Select the files, fill out the dialog box that appears as you need.

How can I import video and sound from my sony camcorder?

I have just bought the mac. I'm struggling to import video AND sound from my Sony DCR-SR87 hard disk handycam camcorder. From what I've read already, I ended up purchasing and downloading Quicktime MPEG2, and used the Utility MPEG Component Lion from downloaded MPEG Streaming 1.9.3b6 to enable video and sound to play on the computer directly from the camcorder. The problem is that when I import these clips using iphoto (it pops up when I connect the camcorder), the sound does not accompany the video onto the computer. I've hit something of a brick wall and would really appreciate any help.

OK, according to
http://support.apple.com/kb/ht3290
your camera is supported by iMovie 9. Perhaps the question is better asked in the iMovie forum. Would you like me to ask a moderator to move the thread?

When I import video and place it into timeline as a raw file with no fx or any added processing I get the message that the video is unrendered and therefore it doesn´t playback?

When I import video and place it into timeline as a raw file with no fx or any added processing I get the message that the video is unrendered and therefore it doesn´t playback?

FCE can use DV or AIC video formats natively. Any other format will need to be converted to one of those two if you want to avoid constant rendering. The clips you use must match the Sequence settings.
-DH

I am trying to import video and the audio doesn't upload with the video. Help.

I am trying to import video and the audio doesn't upload with the video. Help.
I upgraded to iMovie 11 because the previous version wouldn't read the type of video I was importing (VOB). The video imports but not the audio, what do I do?

What are you capturing from? You may not hear the auido as it's captured but it will be there. After it's captured can you see the audio waveforms? Do the audio meters move when you play the clip? If so then go to "View" then "Audio Playback" and set it to 'Built-in Output" if you're monitoring audio through the computer.

Youtube video requiring Flash Player

Some of Youtube video requires Flash Player. I installed it successfully, but I still encounter the same error message. It appears that I have not installed ActiveX control. How do I install it. BTW, is the ActiveX control the issue here or somethingelse is going on?

Hi,
Please check the below mentioned knowledge base article and follow the instructions
http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html

Video Pixelation occurs while recording the video using flash player

Hello,
I am recording the video using flash player 9 ( using the
flash media server 2.0 on the back end). Everything used to work
fine in the past. The quality of the flv video was good. Now
suddently, I have started seeing the pixelation in the recorded
video (very poor video quality). Nothing has been changed in the
code. However on the server side, I am not very sure if there is
any windows update has taken place and have caused the problem with
the codec on server.
However my understanding is that when we record the video
then flash player use its own codec not the flash media server.
Can any one help me on how I can get rid of pixelation
issues?
Thanks for your help.
Best Regards
Pradeep

Hello Melissa,
I might not be understanding the question right, but if you
are using Flash
Player 6, and the Flash Player 6 video player component, you
can resize the
video by resizing the component on the stage (just drag and
make it larger).
Let me know if that works for you.
Jesse H.
Adobe Community Expert
My site:
http://www.jharding.com
Free Blog Radio:
http://www.tornadostream.com
> I'm streaming video using Flash Player 6. The problem I
am having is
> that the
> video will only play at a super small size, something
like 180 x 60
> (that's a
> guess). Is there a way to play the video at the 320
width that I
> redered it as?
> I'm using Flash Player 6 because some code that came
with my
> purchased Flash
> Template does not work unless it's published to Flash
Plaey 6.
> Thanks in advance!

Need some advise for import video in Flash

Hi guys, i got a problem with importing video in Flash.
Actually I know how to import video in swf
There are 3 ways;
1. loading external video with playback component
2. embed FLV in SWF
3. URL
Ye i know second way is easy and fast but it needs to control everytime when the contents are changed or fixed.
So best way for me and my work is first way
Problem is when i use first way then move full swf file to another pc, just video (in the swf) doesn't play at all.(i'm sure it's from wrong file path)
How to change the content path? I tried so many times but failed.. (just doesnt work and some error message appears on output)
Should I install flash program in another pc then replace all the file?
Please I need your advise
Thanks

I was able to tether my original Verizon Droid using EasyTether without needing to root the phone. The free version wont work with https sites, but its not expensive to buy the full version after you figure out if it will work. Its not fast but seems to work ok.
Scott

Playing videos with flash player

I can't see pictures from some of Home Depot online videos with flash player?

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.

Video in Flash player does not play in C6

I have purchased Nokia C6-00, but in this phone videos do not play in Flash player. It gives me warning message that flash player required to play this video. On flash player site, it is mentioned that android 2.2 is required to install Flash player on your mobile.
How is it possible to play video in flash player on Nokia C6-00?

Symbian anna (new software version) update is available for C6-01 and C7 but there is no software update for C6-00 (with QWERTY keypad).
I am eagrly waiting for software update for C6-00. At least to provide support of FLASH LITE 4.0 so that flash video can be played on C6-00 handset.
I am facing one more problem with Skype utility on C6-00. I have installed latest Skype version on my mobile but even with 3.5G network speed, Skype login does not work.
When ever I sign-in on Skype, it will become idle in between signing process and nothing is happened and after frustration I have to close Skype application.

I get a green screen when I am trying to view video on flash player, it happpens intermittently

my laptop keeps showing a green screen when I am trying to view video on flash player. It happpens intermittently, but once it starts I need to shut down & restart before it will work again. My laptop is less than a week old. shockwave flash is enabled and activeX filtering is off

Hi,
Open window Control Panel, open Windows Updates, select View update history in the left hand pane, then select 'To remove an update, see Installed Updates'. Let the list populate, then locate update KB3001237, right click it and select Uninstall - when this has completed, restart the notebook.
Download and reinstall the latest driver for your particular graphics chip - the drivers and software page for your notebook is Here.
Restart after this reinstallation.
When windows has reloaded, reinstall update KB3001237 via the standalone installation options on the following link.
http://support.microsoft.com/kb/3001237
Again, restart after the installation.
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Shutterfly requests 10.6 or lower to produce a video with flash player what can I DO?

SHUTTERFLY requests 10.6 or lower to produce a video with flash player what can I DO?

Install 10.6 or lower. http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html

Importing video and Flash player 10 and above

Similar Messages

Maybe you are looking for