Importing video form Canon HV20

My question is, how do I get my video imported?
I have connected the camera true an firewire cable to my mac book pro.
It seams that Imovie 08 don´t sense my camera.
I have tested to import to Imovie 07 and it´s working fine.
What am I doing wrong?

Sorry to wander from the topic here, but I couldn't help but notice your user name. I'm involved in kart racing and much of my home video revolves around our karting events. I assume you are involved in car racing and that your top speeds are higher than ours, but whilst our karts barely achieve 100 mph, I suspect I can get much nearer the action than you, indeed at private meetings I often get to film whilst stood (or lay) on the track itself.
I have a Sony HDR-SR8 which I purchased a few months ago but am rather disappointed with (for filming karting) as I find the shots a little jerky, I've also purchased a tripod with controls on the handle to try to get over this and whilst there is a dramatic improvement it still isn't perfect and I often find myself using my old Canon X-M2 which is miniDV and a whole lot bulkier. I was wondering how you found your Canon HV20 for high speed filming.

Similar Messages

How to import video from Canon HV20

to iMovie 10.0.4 using HDMI to Thunderbold converter to iMac desktop

You need a Firewire cable for video. The USB is only good for the still camera mode; to transfer still images from a card, if you have one.
Rick

What are the settings for capturing video from Canon HV20

Hi All,
I want to capture video from Canon HV20 with Premiere Elements 11. What kind of settings should I use to capture the video with full information?
Here is what I did:
1) According the manual, I went to Capture settings panel (Edit > Project Settings > Capture) and selected HDV as capture format, because my video is at high definition.
2) In addition, I checked "Capture to Timeline" and "Split Scenes by cotent".
Are these settings enough?
Thanks.

HV20user
Sounds reasonable, using Add Media/HDV Camcorder, but....
Have you reviewed the Adobe write up on Premiere Elements 11 DV and HDV capture firewire into it.
http://help.adobe.com/fr_FR/premiereelements/using/WS5CDA0F91-60F1-4b79-ABF6-E9E75F498DB2. html#WS2AF26FB5-4C63-4c46-9DB3-7249558F6528
The mention of Get Media instead of Add Media makes me wonder if the video's instructor was demo'ing from Premiere Elements 10, but...
Major factors have always included having Premiere Elements project preset set correctly to correspond to your camera settings...For HDV data capture firewire...
NTSC HDV HDV 1080p30 or PAL HDV HDV 1080p25 depending on if you are targeting a NTSC or PAL area where frame rates are typically a consideration.
I had not done any DV or HDV data capture firewire into Premiere Elements. But, Premiere Elements 11's take over of the project preset setting would encourage me to encourage you to verify your project settings before the capture.
There are probably many more, but the following is online discussion of one Canon HV20 issue
http://forum.videohelp.com/threads/316970-video-capture-problems-HV20-camcorder-is-control led-but-no-video-capture
If you experience difficulty with the HDV capture fireware into Premiere Elements 11, you might consider what some others have done in this regard, that is, use HDVSplit for the capture firewire and then import the split (.m2t) clips "Add Media" into Premiere Elements 11 with the appropriate HDV HDV 1080p (1440 x 1080 HD anamorphic 16:9) project preset.
Please update us on your progress when you get a chance.
Thanks.
ATR

Can't import video from Canon GL-2 into new Macbook Pro

Can't import video from Canon GL-2 into new Macbook Pro
Using 9-4 pin cable and then using firewire 800 to thunderbolt adapter.

Does the MBP see the camera at all?

Premiere Pro 1.5.1 HDV VIDEO CAPTURE - Canon HV20

Hi,
For the life of me I cannot get my camera to capture in HDV. I can switch over to DV and it will capture everything just fine. The settings I recorded in are HDV standard, Widescreen 29fps. Not the 24. But it just tells me the device is ofline no matter what I try. I grabbed a stand alone CineForm HDLink and that doesn't detect it either. Any help would be greatly appreciated. The Client wants HD, not DV.
Premiere Pro 1.5.1 HDV VIDEO CAPTURE - Canon HV20 firewire
Thanks in advance!

Ok, I spoke to soon. I kept searching and searching. Finally found this..
http://www.hv20.com/showthread.php?t=12131
My camera was locked in DV mode. So I had to switch it to HDV/DV
"b) As many have said you need to be sure that the camera is set ot output in HDV, and not DV locked. Because I am a bit of a dunce I found it difficult to locate that, even with the manual so here are some foolproof instructions on how to get there:
in "Play" Mode > FUNC > MENU > PLAY/OUT SETUP2 > DV OUTPUT [set this to HDV/DV]"
That did it.

Problems importing Std Def videos from Canon HV20

I recently tried to import some standard def footage from my Canon HV20 and ended up with a garbled mess. All the HD video I have imported looks great, but I have a few clips that are SD that I would like to import. I have tried every setting I can and nothing seems to help the picture quality. It looks the same when previewed on iMovie 08, but it looks fine on my TV and camera. Any idea what's going wrong? I would really like to use this footage.
Thanks for the help.
Matthew

I think you have to try and SAVE the movie clip onto Movies and then put import them onto iMovie HD.. I dunno the rest I need help on stuff too xD
Shang

Dropped frames importing HDV from Canon HV20

Hi all,
I have a strange problem. When I capture a HDV tape with my Canon HV20 camera it runs ok for some time but starts dropping frames after a random time. It shows a yellow triangle in the capture screen. Sometimes it stops the capture half way by it self before the end of the tape is reached.
I can see that the memory is then full and the swap is +-1.2 Gig.
I disconnected all other firewire / USB stuff from the mac.
320G of free Disks pace.
Capture in FCE works ok but when importing it in to imovie the timestamp is not there.
Any idea's?
Cheers,
Jeroen

I tried reinstalling Quicktime, trashing my preferences, and repairing permissions, but the problem still persists. I think this problem may be different in nature from the communications problems that article is designed to address. When I try to import HD video it fails, but I can capture standard definition video recorded on the same tape without even having to disconnect my camera. I just close the capture window, find a section of tape with standard def video on it, and it captures without a hitch. I may be completely wrong about this, but it seems like Final Cut is just not able to recognize the HD video that has been captured on the tape. If anyone has experienced a similar problem or knows of a solution, help would be greatly appreciated.

Importing video from canon zr950

i can't import video from from canon zr950 as my macbook does not have a firewire port and the usb port does not recognize video camera. any other alternatives to importing the video from mini dv?

You really do need a firewire port on your computer to import DV.
One option would be to call the store manager of a nearby Apple Store, and politely ask if you can come in and use one of his computers that has firewire to capture your movie.
If your camcorder has a feature that let's you play it on TV through RCA cables (Red, White, and Yellow) or S-Video cable, then it is possible that you could capture using the ElGato EyeTV Hybrid. However, I have not tested this, and I would hesitate to tell you to spend $100+ if I am not sure. I may have time to test it next year some time. Even if it works, it will not be at the quality of the original DV. Would the quality difference by visible? That is another thing to test.

Help needed: How to import video from Canon Legria Camcorder FS306?

Dear all,
After happily purchasing Canon Legria Camcorder FS306, I realise that my IMOVIE HD could not detect the camcorder when connected to my Macbook pro.
Have 2 questions here:
1. Is it impossible for IMovie HD to detect newer camcorders? Should I then upgrade to IMOVIE09?
2. Currently, Canon Legria Camcorder FS306 is not listed as 1 of the supported camcorders for IMOVIE09. It is one of the newer models. Is IMOVIE09 able to import video from this camcorder now? Or in the near future? Or it may never be supported?
Tks!
Gam

You would need imovie 09 to use this camcorder.
This camcorder is not on the iMovie 09 supported list. However, every Canon camcorder since 2008 has supported iMovie 08 and 09, so odds are good that this one will, too. Odds are good that it works right now. IF you want to know for sure, call Canon. ....or take your camera to an Apple Store and hook it up.
It might be possible to do some manual conversions and continue to use iMovie 6. For example, you could try converting the MPEG2 files to DV using a tool like MPEG Streamclip. You would also need the $20 Apple QuickTime MPEG2 Playback Component. I find iMovie 09 to be a much better editor, but if you are comfortable with iMovie 06, this might be worth a try for you.

How to import video from canon xa10

I can import video file from canon xa-10 camcorder to Final Cut Pro X. Please help.

I have an XA10 and do this all the time.
As Tom said, you just need to connect the camera using the USB cable and then do an "Import from Camera" from within FCPX.
And yes, once you choose which clips (or which portions of clips) you want to import and then close the import window, FCPX has to transcode them. However, you can begin editing while it is working on transcoding the files.
However, if you disconnect the camera before FCPX has finished the transcode, the media won't be there the next time. This stuff isn't magic. It still has to transcode. The only "magic" of FCPX is that you can start editing the footage before the transcode is complete...assuming, of course, you leave the media connected.
Copying files over first and then trying to import does not work. You have to do it from the camera.
The difference would be if you were recording to an SD card (which the XA10 will do), instead of the camera's built-in flash memory. You can disconnect the camera and just connect a card reader (and the card, of course). But the same principle would apply. You could start editing while FCPX is transcoding, but don't expect it to all be there if you disconnect the card reader or shut down FCPX before finishing the transcoding process.
Hope that helps.

Can someone help with importing video from Canon XA10 (AVCHD) into PE 11?

In PE 11 when I import video from my canon xa10 (avchd) the quality is terrible, I also have a canon xa20, 60D and gopro that I video with and they all turn out with great video quality. Is there a reason why the xa10 video quality is bad? Setting I need to change?

dillonknopp
Thanks for the follow up.
In Premiere Elements 11 and 12 takes over setting the project preset based on the properties of the first file drag to the Timeline. Sometimes it does it right; sometimes not. You can check what the project has set by using the readings from Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio even if the fields look grayed out. If the project preset is set for NTSC AVCHD Full HD1080p30, then the Edit Menu/Project Settings/General should be as represented in the following screenshot
Please refer to setting the project preset yourself manually and then importing the source media into the project.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
Depending on how the current stage of troubleshooting progresses, you might want to post a screenshot
of your Expert workspace, showing the Edit area monitor display of the rendered Timeline.
We will be watching for your results.
Thank you.
ATR

Cannot import video from Canon ZR10 to iMovie '08

I have a Canon ZR10 mini-DV camcorder. My son is trying to import video to iMovie '08 and it does not seem to recognize the camera. I am using a 4-pin to 6-pin Firewire cable. When I turn on the camcorder, "DV In" appears on its screen so it seems to be in the proper mode to transfer video. However, iMovie doesn't do anything. I don't even get a blue screen. I tried File-->Import from Camera but that didn't so anything. Does anyone have any ideas or suggestions? He's very anxious to edit his movie! Thanks...

Hello All,
I have been attacking this problem for a few hours and I have found that if you turn off and or make all network items inactive the camera will immediately be recognized by iMovie.
Took a long time to figure this out. Not sure why this is happening but it has fixed my problem.
Before this fix I would intermently get the camera and its memory sticks in the usb slot to recognize in iMovie.
Now all is well and works every time as long as I turn off or make things inactive
Hope this works for you!

Can't import video from Canon ZR50

Hi,
I'm having (a LOT) of trouble importing video from my DV camcorder (a Canon ZR50) into iMovie. I used to do this all the time (using this camcorder) with no problems whatsoever, but I haven't imported any video for a couple of years.
First, I got the error message that the camcorder was sending "half-frames" that iMovie couldn't accept and to change the recording speed to SP.
I changed the recording speed to SP, but still got the same error message. So, I then uplugged everything, restarted the computer, took the battery and the emergency battery out of the camcorder, waited five minutes, replaced the batteries, reset the date/time/recording speed (to SP), plugged the firewire back in, and got the same error message.
I then decided to go boot up my ancient blue dalmation iMac that I used to edit video on, and although iMovie said the camcorder was connected, when I hit either "play" or "import," even though the video would play on the camcorder, it wouldn't show up in iMovie.
PLEASE help me get my video onto the computer!!!
Thanks so much,
Sierra

Does the MBP see the camera at all?

Import video from canon eos 550d

What settings should be FCP7 to successfully import .mov from Canon eos 550d?
I would like video without the noise and recoil.
Tnx

550...that's the T2i, right? Downloading the EOS Log and Transfer plugin, and hacking it, is one way:
http://lfhd.net/2010/04/04/log-and-transfer-for-canon-dslrs/
Magic Bullet Grinder to convert to ProRes is another:
http://www.redgiantsoftware.com/products/all/magic-bullet-grinder/
Or Compressor.
No matter what, you need to convert the footage to ProRes for editing:
#51 - Canon 5D MkII / Canon 7D footage into FCP
Shane's Stock Answer #51 - how do you bring in footage from the Canon 5D and 7D cameras into FCP to edit?
You need to convert all of the Canon 5D MkII footage from the H.264 format that it records, to ProRes 422 (ProRes HQ is unnecessary...no quality difference) Yes, the file sizes get drastically larger. H.264 is an acquisition and delivery format, not an editing one.
You can use the Canon EOS Log and Transfer plugin that works with the 1D, 5D and 7D cameras. This plugin is great because it brings in the camera's TIME OF DAY as timecode, instead of starting each clip at 00:00:00:00 like Compressor or other conversion software will do.
CANON
Here is a tutorial on how to use it:
Editblog tutorial

Import video from CANON LEGRIA HF R18 into adobe premiere elements

Hallo,
I have a MAC and I don't know how I have to set the project to import videos from my camera.
Thanks

jazzandogospelsinger64
As a first pass at this I would transfer the video from the camera to the computer hard drive and from there import that into Premiere Elements 10 Mac with Premiere Elements 10 Mac Get Media/Files and Folder. Under the circumstances your Premiere Elements 10 will perform as a 32 bit application running in the 32 bit compatibility mode of the Mac 64 bit with the limitations of 32 bit. I am an Elements Windows user, but the principles and suggestions that I am about to make should be applicable to your situation. I have gone off track with any Mac specific details be sure to say so. The 32 bit business means that Premiere Elements 10 Mac will not be able to take advantage of all the 64 bit resources as would be the case if you had Premiere Elements 11 Mac running in a Mac 64 bit operating system.
Your Canon HF-R18 FXP would be highest quality 1920 x 1080 with a bitrate of 17 Mbps (megabits per second). I need to confirm if you are recording interlaced video 1920 x 1080 (50i) or 1920 x 1080 p25 (in the progressive mode). From what I have read your audio is Dolby Digital Stereo.
If 1920 x 1080 (50i, aka 25 interlaced frames per second), then use the Premiere Elements 10 project preset = PAL/AVCHD/Full HD1080i25.
If 1920 x 1080 (25p, 25 progressive frames per second), then use the Premiere Elements 10 project preset = PAL/DSLR/1080p/DSLR 1080p25.
In either circumstance, when you drag the file from the Media area to the Timeline, do you see a colored line over that content on the Timeline? You should not be seeing a colored line over this content if we have the correct project preset selected. But remember that, each time after you edit that video, it is normal for a red line to appear over it. That is the program telling you that you need to render the Timeline content, one way by pressing the Enter key of the computer main keyboard to get the best possible preview. When the rendering is complete, the red line will turn green. Thereafter, only a red/green indicator system (with all its implications) will exist for letting you know if the program thinks that you are seeing the best possible preview. No more non colored line choice, just red (need) and green (not needed). When you are in the no colored line or green situation, pressing the Enter key will just get you playback of the file in the monitor - no rendering available.
See what that looks like on the Timeline at playback there.
Let us start there and be ready for the next phase "How do I want to export that Timeline?" with all the details associated with that phase to get the best results.
Looking forward to your follow up.
Thanks.
ATR

Importing video form Canon HV20

Similar Messages

Maybe you are looking for