Importing Video from Video from GV-DV1000 NTSC Sony VTR - Image and Audio out of sinchronization

Hi, I´m using Final Cut Express 10.1.1. and to import video, the Sony GV-DV1000 NTSC. My Operating System is Maverick 10.9.2
When I import a Video, the audio and video is sinchronized but when I start to edit, video and audio are not sinchronized.
The connection from the VTR to the iMac is thru a firewire cable to a thunderbilt cable. There is a way to avoid this problem?
Thanks for your prompt response,
Sincerely,
Alberto Quiros Bonett

We have heard of some capture issues with DV and HDV.
Most users get some success by capturing with QuickTime X.
Try a test.
Al

Similar Messages

Hello... I imported songs from a CD onto my macbook pro and now I would like to transfer the songs onto my iphone 5... I can't figure out how to do that. Does anyone know how?

Hello, I imported song from a CD onto my Macbook Pro and now I would like to transfer the songs onto my IPhone 5. I can't figure out how to do that, does anyone know how I would be able to do this?

Dancer88 wrote:
How do you get songs into a Smart Playlist...? Also, when I select the music tab on top, there is no iphone button or anything that says sync to iPhone. That's where I get confused
When you set up a Smart Playlist, it automatically populates the list with songs. You don't have to do anything. Now, you may not have set it up properly, meaning your set up fails to recognize any songs.
If you just want to put music in a Playlist, just create one, give it a name. Then drag the music from the "music" list to the playlist. It copies the information there. And when you sync the Playlist to your iPhone, all the music goes.
It's truly easy, but there is a bit of a learning curve until you're good at it. Keep asking questions here, everyone will help you. But do read the Apple documents, they lay out pretty straightforward.

Successfully imported from TRV 460 firewire for D8 but fails to record from translated Hi8 or 8 even though images and audio is received.

TRV460 can play back newer format D8 as well as old formats Hi8 and 8 tapes. According to manual and comments I've seen on e-bay and internet blogs when it outputs the playback for old Hi8 and 8 tapes it translates them to a digital signal on the firewire connection between my sony camcorder TRV460 and macbook Pro. If I'm using a D8 tape it works fine. If I'm using an 8 formated tape the image and audio appear on the import playback. But when I try to record there is a warning message that data is missing. If this is a sony problem how is it that the imovie succussfully provides the visual and audio? It would appear the digital is sent. Seems to me like it must be an imovie issue? But I'm not sure.
Can anyone help.

If I understand this correctly, then you have an Optimus graphics card (couldn't find anything online, but your lspci looks like it). I too have such a setup on my laptop. The thing to keep in mind here, is that your main graphics card is the Intel integrated card. So instead of installing your system like with an nvidia card, you install it like an intel card. Specifically, you would want to follow the instructions on Bumblebee. Once you followed them, the whole graphics part runs on the Intel card. Once you want to play a game or do some other heavy graphics card work you call your application like this:
optirun wine /path/to/game.exe
Notice how optirun tells the system to use the nvidia card. It will take a second or two to start it (specifically, enable the card, start another X screen and launch the application on it transparently). Follow the instructions in the Wiki if you have any problems.
If you don't have an Optimus card (just NVIDIA, no Intel), then don't follow any Optimus instructions, just usual NVIDIA stuff from the Wiki.

Creating Video with single Image and Audio

Hi All,
My requirement is to pass an Image and audio and the expected out put is a like a video which shows the image and plays the background. Can it done in JMF if so how can it be done? Thanks.

Hi,
I am also trying to do almost the same thing using the JpegToMovieConverter, however I am facing a problem.
Objective: To create a video file which will include the output from webcam and my mic. Also, there are some images. Whenever the user selects an image, then instead of the webcam video, that image should be shown until it is unselected or the user selects some other image.
Problem: I have implemented the mic and webcam streams but
1. I dont understand how would I create a stream from my image, given that the length of stream should be as long as the image is selected.
2. Also, how would I merge the three stream so that the images' stream overwrites the webcam's video stream.
Thank you.

Who have knowledge from Femtocell technology at Sony (Xperia Z2 and Zperia Z)

Contact request for a person who have knowledge from Femtocell technology at Sony (Xperia Z2 and Zperia Z).
I have been unable to resolve mobile data connectivity issues occuring with femtocell. Me and the operator have been trying to find a resolution for 2 months now. The thing is that this problem occurs only with Sony mobilephones. So i would need to find a developer from you who have better knowledgemtnt from the technicalside of your phones.
Solved!
Go to Solution.

Contact your local Xperia Care regarding this issue.
http://support.sonymobile.com/global-en/contactUs/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

How do i send an html file exported from muse as email blast with images and live links?

My question it:
How do i send an html file exported from muse as email blast with images and live links?
I have designed a "website" in adobe muse and exported it as an html file. I am not sure how to send my .html file in an email!
Best,
Nicole

Unfortunately, the answer is, you don't. The requirements for HTML displayed in an e-mail reader are very different than those for HTML displayed in a browser. The output of Muse won't work as an HTML e-mail. You could upload the Muse site as a website and provide a link to it in an e-mail, but the HTML generated by Muse is not suitable for direct display by an e-mail program.

Imported files from my camera, a mixture of photos and videos, the videos (mp4 format on my Canon SX60 HS) always appear at the start of my library view. What am I missing here?

Even though I select sorting by capture time, the videos do not intersperse with the photos in chronological order. What am I missing here?
I have tried both putting them in a collection and viewing all pictures etc. to no avail.
In Windows Explorer, I have them sorted by time taken successfully. They all import into folders by date in "My Pictures", both photos and videos when I import them.
I am running Windows 7 Pro 64 bit and LR5 CC edition.
Ron.

LR's handling of video metadata (e.g. capture time) is incomplete and buggy. Please add your opinion and vote to these threads in the official Adobe feedback forum:
Lightroom: Still inconsistent capture date/time for videos
Lightroom: Metadata applied to videos in Lightroom isn't available in other applications

MPEG4 video from imovie is sluggish and audio out of sync

Hi y'all,
I am new to this. So I need some hand holding here. I am working with video that was exported in MPEG4 video from imovie on a mac.
The Camera I used is a Sony FX7 HD camera with SD tape.
So Now I am trying to edit the video using Premiere Pro CS3 creative suite.
Import into CS3 is fine. Playing the imported video in the source monitor is fine as well. All looks well.
However, here are the challenges I am having:
1. When I try to play it in the Program monitor its very sluggish. Audio plays fine but picture lags behind.
2. And once I edit the the video and try to export it as flash video or as a windows media, the video and audio are out of sync.
The video is choppy as well.
Details: source video is 720x480 and trying to export to 320x240
My project details are:
DV-NTSC standard 48khz
Video is 10 min long

OK, not my choice of workflows, but... I assume that the MP4's are H.264 encoded. There are many of these. Three common ones are Lead, MainConcept and Apple. Some find that one works better than the others. These are not the ONLY versions, but are common. You might want to explore others, depending on which one you have installed. G-Spot can tell you which you have.
Next, you can Render your Timeline, to get things as smooth as possible.
Note that the MP4 files are heavily compressed already. Quality has been lost, and there is nothing that can be done about that. When you Export to, say DVD, you will recompress that material, and loose even more.
In the future, have your Mac-person do the Capture to .MOV [Animation CODEC]. Or, do it yourself to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio.
Not sure of any other ways to get the MP4's playing more smoothly. Much will depend on both your CPU and on your system's I/O sub-system, i.e. your HDD's, their size, speed, controller type and how they are utilized.
Good luck,
Hunt

Importing workflows from GRC 5.3 to GRC 10 and then changing them

Hello Experts,
We are migrating our SPM,RAR and CUP data from GRC 5.3 to GRC 10.1.At present in our CUP we have user access request workflow as 2 stage workflow.Now in GRC 10.1 we require a 1 stage workflow.
I wanted an advise if it would be feasable to import the GRC 5.3 workflows and then make changes into it and remove 1 stage.
Or create new workflows using BRF+.
we are not sure as to what changes can be performed in the GRC 5.3 imported workflows in GRC 10.
Please advise
Regards,
Apeksha

Hello Steve,
Migration you deploy Java component and extract data form 5.3 and import in 10.
still lots of work to be done like and implementation as there are pre-requisite.
second approach does not need to extract all data from 5.3 system(apart from Ruleset,if at all its required)
I never migrate workflows better to create new one identical and faster i believe .
Second approach is little time consuming but good from my point of view.
In java stack people normally go with 2 system landscape .
there has been client where in ABAP people go with 3 system landscape.
now where tricky consulting part play and which data to be imported where.
and few other points needed to be looked like when you use tools and import data.
you actually import all transaction data which contain all active and inactive
expired.
in you go with 2nd option you will have only valid data to start with.
Regards,
Prasant

Video and audio out of synch on burned DVD. DVD project appears to be fine. I'm using 1X speed to burn disc. Project info indicates plenty of space. What should I do?

Video and audio are out of synch on some chapters of a burned double layer DVD. The iDVD (7.1.2) project seems to be fine. I'm burning the DVD using a 1X speed. What else can I do to solve this problem. Based on the project information, I have plenty of space relative to the DVD capacity.

Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Upgrading APEX from 3.2 to 4.0 images and buttons not displaying correctly

Database 11.2.0.1
APEX: 3.2.1
Attemping to upgrade APEX from 3.2 to 4.0. The installation script runs fine and updates the database successfully. I run the .sql to import the images and it ran successfully however when I attempt to access the APEX home page, the images are not loaded and the buttons don't do anything. I did some research through google but did not come to anything that resolved my issue. Does anyone have any ideas?
Thanks for your time...

If you are using mod_plsql, you need to run @apxldimg.sql script with SYS user file present with Apex installation. Also provide the location of your apex folder as parameter to this script.
Habib

Video and audio out of synch after export

Hello guys,
I have 5 minutes long video on timeline.
1 audio and 3 video layers.
All looks good, but once I export it as QuickTime self contained movie (current settings) to my desktop, video and audio is out of synch.
Any ideas what it might be wrong?
Thank you for any advise.

Hi
Did You Render All - first - before Export
Did You Mixdown Audio - Render Only - last line
What material was used
• Video Codec and fps
• Audio file formats and bit-depth and frequency e.g. .aiff 48kHz 16-bit
• What kind of Project Set-Up did You use e.g. Easy Set-Up - PAL-48kHz
Yours Bengt W

HT4623 Videos from Netflix, youtube, etc. frequently stop, freeze and run out of sync on my ipad gen4. Any hints as what to do to correct this problem?

Videos on my ipad 4gen stop, freeze and when they do restart at times are out of sync. This happens on Netflix, youtube, FoxNews, etc. Any suggestions as to the problem or correction.

The most common cause of this type of issue is an inconsistant or slow internet connection.
But, you might want to try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray BEFORE doing the reset.

Have imported video into audition but how do I get the audio to snap after editing?

Just to explain, I have imported a timeline from Premiere into Audition CC. I have one full piece of video and one piece of audio but need to clean up the audio. What I'm trying to do is edit the audio and have it snap to the piece of audio to the left as you would do normally. I will then concern myself with cutaways etc to mask the video when back in premiere. My question is how do I get the audio and video to snap in sync with my audio edits( Can't seem to get it to snap at all at the moment)
Cheers

The video in Audition is just a guide and can't be edited. So if you cut out chunks of the audio it will no longer be in sync with the video if you try and join the audio together.
When you say that you are cleaning up the audio what do you need to do to it in order to clean it? If it is just a case of muted unwanted parts of the audio that can be done in Multitrack by using the Volume envelopes to mute the audio at appropriate places without cutting anything out so it won't lose sync.

Import files from memory stick on Sony CX-100

Hi, I have several CX-100s and two iMacs - having the same problem with both. I have borrowed a memory stick from one CX-100 and put it in another (both PAL). I can view the footage on the memory stick through the camera, but when I connect the camera to iMovie, it will only view/import the old footage filmed on the other camera. The footage is definitely on the memory stick, but it's as if it's in another chapter on it or something? Has anyone seen anything like this before or know a method I can retrieve this footage into iMovie? Thanks in advance.

Have you recorded any SD (MPEG-2) clips on the memory stick on the other camera? If so, you have to first erase the SD content before iMovie will recognise the HD (AVCHD) content. This assumes of course that you have recorded in HD format on the camera you are now trying to connect. If it is SD format you should be able to access it through iMovie.
This Apple support article spells things out:
http://support.apple.com/kb/HT1793
Although your camera is not mentioned in the article, the same principles apply. Your camera is listed in this iMovie '09 Camcorder Support article, which shows a link for your camera to the above support article: http://support.apple.com/kb/HT3290#2
If this doesn't help, try connecting to iMovie using a card reader, rather than connecting the camera.
John

Importing Video from Video from GV-DV1000 NTSC Sony VTR - Image and Audio out of sinchronization

Similar Messages

Maybe you are looking for