Importing video to imovie08 via USB. Is this possible?

i have a sony digital video camera with an internal hard drive that can only connect to a computer via USB cable. Will this be compatible with imovie on a macbook? i want to be absolutely sure before i drop $1000.Thanks!

Check this list for supported camcorders for [iMovie 08|http://support.apple.com/kb/HT1014]. Here is the list for [iMovie 09|http://support.apple.com/kb/HT3290].
If your camera is on this list, it will work with USB. If not on this list, it will probably not work.

Similar Messages

What QT7 settings do I use to export a 1080p video for playback on iPhone4? I'm using the iPhone to playback 1080p video on 1080p monitor. Is this possible?

Does anyone know what settings I should use to export a 1080p video for playback on iPhone4? I'm hoping to use the iPhone4 to playback 1080p video on 1080p monitor. Is this possible?
I have previously saved my .mov file as Apple TV, but the quality is reduced from 1920x1080 to 960x540. I was unable to sync the higher quality file to my phone (and am worried this is the limitation of the hardware). I added this file to iTunes, added to a playlist, and sync'd to my iPhone. The playback works but the resolution is obviously a lower quality.Is it possible to keep the higher quality for playback through a 1920x1080 hd monitor? Otherwise, would I be able to sync a 1920x1080 mov file to a new iPad or other device? Thanks in advance to your answers.

Does anyone know what settings I should use to export a 1080p video for playback on iPhone4? I'm hoping to use the iPhone4 to playback 1080p video on 1080p monitor. Is this possible?
No. Only the iPhone 4S, iPad3, and TV3 currently support 1080p30 content. Even then the 1080p30 playback support for your monitor may depend on how the device is connected. The iPhone 4 is limited to 720p30 playback.
Is it possible to keep the higher quality for playback through a 1920x1080 hd monitor? Otherwise, would I be able to sync a 1920x1080 mov file to a new iPad or other device?
Not on your current device. As previously stated, the latest generation of iPhone, iPad, and TV devices support a maximum 1080p30 playback capability but may be limited to lower resdolutions depending on your method of connection to your monitor. This information can be found on the Apple web site TechSpecs page for each respective device.

Hi - Re Keynote I'm trying to figure out how to create a music album on USB flash drive. What I want is a background picture with 'click-buttons' to play each track listed, also similar for embedded videos and photos etc. Is this possible with Keynote ?

Hi - Re Keynote I'm trying to figure out how to create a music album (as an artist) on USB flash drive, (accessible by both Mac and PC). What I want is a background picture with 'click-buttons' to play each track listed, and play in order (like a cd) - also similar for embedded videos and photos etc. This should all be on the one page.
Is this possible with Keynote, or any other software package for Mac (am using Macbook Pro) ?
Gav 88

Hi there,
Yikes, it sounds like you've been doing a lot of work on this project... Unfortunately, however, this isn't the Adobe Encore forum, but the Acrobat.com forum. While it seems like an exciting question, we're not able to address issues pertaining to other Adobe products and services. Here's a link to the Adobe Encore forum, where you're more likely to get help for this specific issue:
http://forums.adobe.com/community/encore
Sorry not to be of more specific help to you. Best of luck!
Kind regards,
Rebecca

"No photos found" when importing from Canon 7D via USB

Lightroom has no problem finding my Canon 7D. In the Import dialog, my camera shows up as "Canon 7D" under Source. Still, in the main window it's always that "No photos found" message. :-(
I have formatted the memory card (Sandisk Extreme Pro 32GB and other cards as well) in the camera a several times, taken some pictures and retried importing. Always that "No photos found".
Using EOS Utility is never a problem when importing.
My OS is Windows 7. Firmware 2.0 in camera. EOS Utility version 2.11.4.0
Always the latest Lightroom version.
Am I doing something wrong?

Ken –
I have Windows 7, PhotoShop Elements 10, and trying this in the organizer. Basically, I open Photoshop, login to Adobe ID, and then the black screen comes up. I went to:
File, then “get photos and video”, then “get from camera or card reader”
Elements Organizer – Photo downloader box opens up
There’s a pull down menu asking where to get photos from under the source box but it says “no device found” and doesn’t give me options
I have an older Canon EOS Rebel XT or 350D Digital camera (approx. from 2005). Elements does mention that sometimes you have to download the software from the original camera to then be able to download the photos to photoshop. I was trying to avoid this step and not download this really outdated software on my laptop but if that turns out to be the only way to import my photos, I may not have a choice. If you can suggest where I am going wrong with trying to download the photos, please do so. I have the cord plugged correctly from my camera to the USB port on my HP laptop.
Thank you!
Allie

Video/Screen Sharing via 3G connection not possible - port restrictions?

I'm running Jabber-based iChat AV 5.0.3 sessions from my MBP connected to the Internet via a wireless USB modem 3G/UMTS (German Telekom D1 network). My buddies are connected to the Internet via regular broadband connections (DSL). I have set up a hosted Jabber server via Dreamhost (without SSL, port 5222 used).
Status Quo:
- Contact status of remote Jabber users shows up properly. All buttons (text chat, screen sharing, video) are available (not greyed out) on both sides.
- Text chat works fine.
- Video chat and screen sharing can be invoked from both sides (confirmation window shows up), but after confirmation the initiation process doesn't finish successfully. The video/screen sharing session doesn't run. *iChat AV shows a message indicating that it doesn't receive an answer from the remote user device.* If the iChat session is initiated from a buddy's computer, the buddy gets the same message respectively.
- For testing purposes, I changed the internet connection on my MBP from the mobile 3G USB modem to a regular *DSL broadband connection (same ISP, German Telekom). In this scenario, video/audio calls and screen sharing work flawlessly!* Therefore, I assume that the problems in 3G connection mode is caused by the ISP (German Telekom) blocking/restricting ports required by iChat AV for initiating the video call and streaming the data on their 3G network.
Is there any way to bypass ISP restrictions, by either changing specific iChat AV port settings on both ends (client devices) or by port forwarding? If yes, which settings should I change? Unfortunately, it's couldn't find any document indicating which ports are opened/allowed by German Telekom's 2G/3G (GSM/UMTS) network.
Below is an excerpt of the error message produced by iChat AV:
iChat Connection Log:
2010-11-09 21:18:19 +0100: AVChat started with ID 494414145.
2010-11-09 21:18:19 +0100: [email protected]: State change from AVChatNoState to AVChatStateWaiting.
2010-11-09 21:18:19 +0100: 0x1a8bf8b0: State change from AVChatNoState to AVChatStateInvited.
2010-11-09 21:18:28 +0100: 0x1a8bf8b0: State change from AVChatStateInvited to AVChatStateConnecting.
2010-11-09 21:18:28 +0100: [email protected]: State change from AVChatStateWaiting to AVChatStateConnecting.
2010-11-09 21:18:48 +0100: 0x1a8bf8b0: State change from AVChatStateConnecting to AVChatStateEnded.
2010-11-09 21:18:48 +0100: 0x1a8bf8b0: Error -8 (Did not receive a response from 0x1a8bf8b0.)
2010-11-09 21:18:48 +0100: [email protected]: State change from AVChatStateConnecting to AVChatStateEnded.
2010-11-09 21:18:48 +0100: [email protected]: Error -8 (Did not receive a response from 0x1a8bf8b0.)
Video Conference Error Report:
0.000000 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/DotMacConfiguration.m:1039 type=4 (FFFFFFFF/2)
[HTTP GET failed (0)]
0.000627 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/DotMacConfiguration.m:758 type=4 (FFFFFFFF/0)
[HTTP GET failed (0)]
0.346813 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/DotMacConfiguration.m:758 type=4 (FFFFFFFF/0)
[HTTP GET failed (0)]
1331.086051 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1333.086142 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1335.086270 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1337.086603 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1339.087985 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1341.088212 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1343.088361 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
929.446913 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2059 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
934.996640 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2074 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
935.002114 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2266 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
935.467624 @/SourceCache/VideoConference/VideoConference-415.22/SIP/Transport.c:2138 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK0fdd30e326aa779b
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=544473054
Call-ID: 9c7ecf46-ec3d-11df-8530-f81eeb5f4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.4
Content-Type: application/sdp
Content-Length: 708
Video Conference User Report:
928.427249 @:0 type=5 (00000000/16402)
[Local SIP port]
934.996832 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2171 type=5 (00000000/0)
*[Remote Router]*
*[PORT RESTRICTED]*
934.996842 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2173 type=5 (00000000/0)
[Remote CommNAT Result: 0x000000d0
936.003962 @:0 type=5 (00000000/60)
[Detected bandwidth (kbits/s): 2627 up, 2627 down. (00000000)
936.033015 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VideoConferenceMultiController.m:2423 type=5 (00000000/0)
[Start Conference With UserID: u0]
978.787787 @:0 type=5 (00000000/16402)
[Local SIP port]
1014.011790 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2171 type=5 (00000000/0)
[Remote Router]
[PORT RESTRICTED]
1014.011800 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2173 type=5 (00000000/0)
[Remote CommNAT Result: 0x000000d0
1015.024555 @:0 type=5 (00000000/60)
[Detected bandwidth (kbits/s): 2627 up, 2627 down. (00000000)
1015.031800 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VideoConferenceMultiController.m:2423 type=5 (00000000/0)
[Start Conference With UserID: u0]
1323.083386 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2171 type=5 (00000000/0)
[Remote Router]
[PORT RESTRICTED]
1323.083396 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2173 type=5 (00000000/0)
[Remote CommNAT Result: 0x000000d0
(…)

Hi,
Does this 3G device have any set up functions that are on your Mac ?
If it does not it is likely that it is wide open to all Port (65535 of them).
I presume that in System Preferences > Network you see a Public IP when using this device ?
Again this would tend to pint to all the ports being open.
Is there anything on the ISP's web site that suggests this device is unsuitable to be used with VoIP or SIP connections ?
VoIP (Voice over the Internet) uses the SIP connection process the way iChat does.
Most likely the issues is the way packets are sent.
When you do a download, for instance, do you find the speed increases in the first few minutes ?
When some data packets are sent over the Internet the next one is not sent until confirmation that the first has arrived.
This Latency effects Point to Point WiFi (antenna to Dish on House) and satellite connections mostly particularly when it is a two way thing.
It can effect Mobile/Cell phone type connections.
What sort of Speeds are you getting on the 3G device ?
http://www.speedtest.net/
Do these seem to get faster as the time proceeds ? (this can be difficult to spot).
The Log mentions one end being at just over 2Gbps although it does not make it clear which end.
As the Remote end is the end that reports "Router: Port Restricted" and it works over standard DSL we have to presume they have the ports open.
You could try restricting iChat 's Bandwidth in iChat menu > Preferences > Video Section to 500kbps (try it at both ends)
If that does not work try 200kbps
This may stop iChat from trying to send data too Fast for the Network Connections.
Realistically there are a few too many variables here.
It could be Speed of data throughout at the Initiation point. (Slow Start up of data transfer)
It could be an Internal setting preventing SIP.
It could be that the 3G network sends and receives data by different routes.
(I have seen this once when a ISP was repairing some Cabling. To maintain end user speeds they managed their own network to split Incoming and outgoing data to the end point.)
iChat does not like this as it checks the IPs and the Hops (number of intermediate stages/servers) and if the data is different it will not connect (Man in the Middle attack protection).
I can't remember the last time I knew of someone being successful with either an 3G USB dongle or a 3G phone as Modem (internet Sharing).
Despite my ideas I think you will be unlucky and this will not work.
10:31 PM Saturday; November 13, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Importing Video via USB??

How can I import video vith sound via USB? I have some family cassets and I bought this analog to digital converter but it is for PC I tought I can just plug it in and capture it with i-Movie but I was wrong. Is there any other way to do this? Please help.

Hi Roman,
welcome to this forum
iMovie is an edit app meant to work with firewire connected miniDV camcorders
so, a usb connected PCconverter will not be recognized by iM, and probably will not be recognized by any Mac app... Mac: there's coming in some data from some usb-device, what shall I do? help....
you can give the "image capture app" in your utilities folder a try, but I would be surprised, if THAT combo works... no, PChardware on a Mac... in many cases a NoGo....
as Grandpa told me:
buying cheap means buying twice......... :-/
From VHS to DVD
Give New Life to Old Movies
http://www.macworld.com/2004/05/features/fromvhstodvd/

Can you import video footage from a tape camera via usb into final cut?

I have new macbook, late 2008, and I am missing the firewire port.
I have a tape camera so I cannot import video into imovie via usb.
If I bought final cut express, could I be able to do such an import?
Thank you.

Nope. USB only.
Connections and expansion
MagSafe power port
Gigabit Ethernet port
Two USB 2.0 ports (up to 480 Mbps)
Mini DisplayPort
Audio line in
Audio line out
Kensington lock slot

Importing video- video import screen does not pop up when I plug camcorder in

I have used IMovie before on my Mac Book 5 years old. But I now have a Mac Book Pro with all of the latest applications and I am unable to import video. I have a panasonic digital video camcorder. PAN PV-GS85. I plug in my mini USB with IMovie open and it does not pull up the import screen. I have tried turning it off then back on, switching imputs on the camcorder and still no luck. I have a video I really want to create into a movie for my mom and this is not working... Any help? The other ports on my camcorder for says DV and USB.

Hi
It seems as Your PAN PV-GS85 is a miniDV tape Camera. If so You must use a FireWire Cable to connect to Your Mac. DV-out on Camera is same as FireWire.
So You need a FW - 4-pin to 6 or 9 pin connector depending on what FW-port Your Mac has got.
FW400 = 6-pin
FW800 = 9-pin
Neither iMovie any version or FinalCut can import from Your Camera via USB/USB2 - at all.
Also connect Mains adaptor to Camera and Import/Capture will work better.
Yours Bengt W

TS2776 iPhone 5, Outlook 2013, Windows 7.0 64-bit. Every time I connect my phone to my computer via USB, iTunes opens with the "accept our terms and service" then deselects the boxes checked under the INFO tab to sync my calendars, contacts...help?

I am connecting my iPhone 5 to my Windows computer via USB. This should open iTunes and start the sync process. Instead of iTunes opening, I get the iTunes service agreement to which I must agree. Then iTunes opens and begins to back up my phone. It is syncing my photos and music (although the music thing is another nightmare), but under the "info" tab in iTunes, the boxes of which functions I want to sync are no longer selected. Hence the computer and the phone are not sharing information. When I select the functions I want to sync, I must either replace or merge. If I replace, I lose the information I recently put into my phone. If I choose to merge, then I have duplicates of everything.
How can I resolve this problem? Why is iTunes acting like it doesn't know my phone?
I'm using an iPhone 5 iOS 6.1.4, Windows 7 64-bit, Outlook 13, and the must current version of iTunes (because I've removed and reinstalled it twice already).
Thanks for any help!
Christine

After you'd run the Configure Classic instance did you run in the statement as stated in 'Oracle® Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1) Part Number E10421-05'?
java -classpath ORACLE_HOME_DIR\discoverer\lib\disco-config.jar;ORACLE_HOME_DIR\oui\jlib\OraInstaller.jar;ORACLE_HOME_DIR\opmn\lib\iasprovision.jar -Djava.library.path=ORACLE_HOME_DIR\oui\lib\win32 oracle.disco.install.config.DiscoUtil -oraclehome ORACLE_HOME_DIR -tnsadmin TNS_ADMIN_DIR
I've completed an installation with the same steps (although I ran the config.bat file in as_1/bin rather than from the program files list and also I've the jrockit jdk installed)
I've found that this fails with the error;
INFO: This tool works only on Windows Platform. Exiting the program
Which is strange considering this is Windows Server 2008 R2 64-bit
DISCO is running in the EM console but the URLs (as defined in the installation summary report) do not resolve properly. I was just interested to hear if you're installation was the same, this isn't the first installation I've done, they've all had a similar issue

IPhone 5 not connecting hotspot via USB to Macbook after upgrade to IOS 7.

My Macbook can only get internet hotspot net through wifi or bluetooth but unable to connect via USB and this happen after upgrade to IOS 7.0.2

You do not want to try to sync photos back from a computer that you do not sync with. That will erase everything from the phone. The pictures you downloaded to the computer do not go back to the camera roll. They are part of the iTunes sync process now. Take and put them on a CD or flash drive, put them on the computer at home and then sync them back via the photo tab in iTunes.

Camera firmware update via USB thru ImageBrowser EX?

Hello everyone!
I recently made my first ever Canon camera in the history of the universe (Powershot SX280 HS) and it's amazing.
I have a question, though, about firmware updates.
When I launch ImageBrowser EX, and click on the button to "update to latest version" with my camera connected to my computer via USB, does this update the firmware too? Or does this only update ImageBrowser EX?
I understand that updating the firmware requires me to download a file from my product's support page and manually installing it using a memory card. But I was wondering if updating through USB is also possible.
Thoughts?
Thanks for reading this message.

I am pretty sure you have to do it the way Canon tells you to in its documentation on the support page for the 280, i.e. copying the firmware file to a card in a card reader. There is no mention of ImageBrowser in the documentation. Updating via ImageBrowser is probably just for the browser software on your computer. Most things can be done via USB but updating firmware is usually a pretty rare thing except for this particular model camera which has seen two updates so far and I wish would see another (since I too am verging on returning it to the store before my 30 days are up, the day after I get home from vacation). The issues improved with the updates but are still there (see very long thread about battery issues in this forum).
Powershots: A80, SD1300is, SX280 (returned)

1102w won't print via USB

We have a 1102w that is currently being used via USB. This works perfectly with my wife's macbook and my windows 7 laptop.
I have a macbook pro with OSC v 10.9.5 and have gone through the add printer routine, but when i print I can see that the document goes to the print queue, the print queue empties but the printer does not print the document, the blue light flashes but no printing.... any help in getting this fixed would be much appreciated.
This question was solved.
View Solution.

Hi @richardskelt ,
I see by your post that you are unable to print over a USB connection on the 10.9 computer, but you can print on the Macbook and the Windows 7 laptop. I will do my best to assist you with this issue.
Connect the printer directly to the Mac by the USB cable and run the Apple Updates to install the printer.
Check to make sure the correct driver for the printer name is listed.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (P1102w)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
Test the printer.
If you are still having issues, please do the following:
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer..
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon ( ), and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign to add the driver, you might have to click the drop down to select the printer's name, then click on the Add button.
Test the printer again.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Connecting Canon MF4350d via usb under OS10.9.4 scanner driver won't install

When driver loaded, the printer/scanner does not show up in the add + list. Canon "ToolBox" will not open. Canon site says they support MF4350 thru OS10.9.3
anyone had any luck with work around? It prints (different driver) just fine.

sanrr wrote:
I tried to add a device, the only new choice was the MF4350 FAX which is including in the scanner driver along with the tool box. I added the fax device, no tool box in MAC Doc.
To use the scanner, you do not add it to the Printers & Scanners preference pane. So as you have noticed, the scanner component does not appear in the Add window when you select to add a printer or scanner.
sanrr wrote:
Also, you said to select scan on the MF then send to computer, don't understand that. There is no send to computer choice on the MF in scan mode.
Sorry. Slightly wrong information. The MF devices that have an Ethernet port or WiFi support will show you more than one option when you press the Scan button on the MF. With your model only having USB, then pressing the Scan button will only show Scanning Mode, which is correct and what I should have said.
So with the MF set to Scanning Mode, open MF Toolbox and click on Scanner on the menu bar. You should see the MF4350 USB in a window similar to what I have shown below
Note that I think you will see MF4340-4350 USB. Which mentions the MF4350 as connected via USB, ensure this is selected (highlighted)
With the MF43xx USB connection selected, you can now click the Save button as shown below
This will display a new window letting you set your scanning preferences, similar to that show below.
If you can get this window to display, click the green Start button to test that you can scan a document. If this does not work, then please reply. If it does work, then you are ready to being scanning from the Mac.

My Ipad mini is not reconized on any computer via USB.

My Ipad mini is not reconized on any computer via USB.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
windows 8.1 itunes wont recognize ipad
https://discussions.apple.com/thread/5697247?start=0&tstart=0
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Wi-Fi Sync Not Working? Here’s How to Fix it for All iOS Devices
http://osxdaily.com/2013/02/17/wi-fi-sync-not-working-fix-ios/
 Cheers, Tom

Can I not sync Calendar via USB anymore?

I just noticed that my iPad no longer syncs with the Calendar on my laptop. I did a search in the Help menu (which actually worked this time) and it said that you have to sync Calendars in Maverick with iCloud. What??? I don't use iCloud, and don't intend to.
Is this true? Hooking up the iPad to the computer no longer syncs data through the cable??

Hello Dub1_303. Welcome to the Apple Discussions!
Ok so here is what i have to work with, an action tech modem with a usb port, and a airport express connected to it via that usb port. the problem is in the airport express itself. Its not configured yet! How can i configure the AE via usb because this pc running vista doesn't have wifi? Can it be done via usb?
The AirPort Express Base Station (AX) must be connected to a DSL/Cable modem via Ethernet to function as a wireless router; the AX's USB port is only for connecting to a USB printer.
It sounds like you are attempting to use the AX as a substitute wireless card for the PC by connecting it to the PC's USB port. Sorry, but that will not work.

Importing video to imovie08 via USB. Is this possible?

Similar Messages

Maybe you are looking for